screenlog_T4_OEM_friendlycore_Linux419.log

DDR Version 1.24 20191016
In
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 340
adma error 0, retry 9996104, cmd transfer error, stat 0x408000, adma error 0, retry 9996113, cmd 0x83a
emmc reinit
mmc: ERROR: sdhci_complete_adma: transfer error, stat 0x408000, adma error 0, retry 9996130, cmd 0x83a
mmc: ERROR: sdhci_complete_adma: transfer error, stat 0x408000,  0x83a
emmc reinit
mmc: ERROR: sdhci_complete_adma: transfer error, stat 0x408000, adma error 0, retry 9996126, cmdmmc: ERROR: sdhci_complete_adma: transfer error, stat 0x408000, adma error 0, retry 9996105, cmd 0x83a
SdmmcInit=2 1
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=60906MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 131785
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             dtbo, start:0xa000, size:0x2000
GPT part:  4, name:         resource, start:0xc000, size:0x8000
GPT part:  5, name:           kernel, start:0x14000, size:0x14000
GPT part:  6, name:             boot, start:0x28000, size:0x18000
GPT part:  7, name:           rootfs, start:0x40000, size:0x67e000
GPT part:  8, name:         userdata, start:0x6be000, size:0x7036fdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf6a78
RunBL31 0x40000 @ 309394 us

NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFINF [0x0] TEE-CORE:init_primary_INF [0x0] TEE-CORE:init_teecore:83: teecore inits done

INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9
Using default environment

no mmc device at slot 1
Found IDB in SDcard
boot mode: None
Found DTB in resource part
DTB: rk3399-nanopi4-rev00.dtb (108609)
HASH(c): OK
AUX CH error happens: 2
233c0)
Fdt Ramdisk skip relocat': base 0x0000000000000000, size[    0.000000] rcu: Preemptible GIC: using cache flushing for LP   0.000000] random: random: getkernel+0x374/0x4f4 with crng_init=0
[    0.000000] rockchip_clk_register_frac_branch: could not find192 (order: 4, 65536 bytes)
[  domain created
[    0.014795] smp: Bringing up secondary CPUs .x00000000f1000000
[    0.017831] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.018589] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.018596] CPU features: enabling workaround for EL2 vector ized
 initialized pinctrl subsystem
rotocol family 16
[    0.065923audit(0.063:1): state=initialized audit_enabled=0 res=1
[    0.nt store backend
[    0.085124] ramoops: attached 0xf0000@0x110000, ecc: 0/0
000.gpio0)
[    0.113117] rockcf788000.gpio3)
[    0.116400] rockchip-gpio ff790000.gpio4: probed gpio4 (ff790000.gpio4)
[    0.117173] rockchip-pinctrl pinc[    0.128849] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.129809] cryptd: max_cpu_qlen set to 1000
[    0.131683] fiq debugger fiq mode enabled
[    0.132333] console [ttyFIQ0] enabled
[    0.132692] bootconsole [uart8250] disabled
[    0.132333] console [ttyFIQ0] enabled
[    0.132692]u ff650800.iommu: version = 1
[    0.161612] rk_iommu ff660480. version = 1
[    0.161941] rk_
[    0.163973] usbcore: registered new interface driver usbfs
[    0.164013] usbcore: registered new interface driver hub
[    0.164057] usbcore: registered new device driver usb
[    0.164404] media: Linux media interface: v0.10
[    0.164434] videodev: Linux video capture interfa0000 00000000 00000000
[    0.356390] d27c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00
[    0.356403] Lost 446 message(s)!
[    0.3568DDR Version 1.24 20191016
In
soft reset
SRX
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x2
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
 0x0
ChipType = 0x10, 431
1
INFO:    GICv3 with legacy support detected. ARM GICV3 drivers
INFO:    BL31: Initializing B256-gebb61ff5 #4 Wed Apr 22 01:3fdt	 @ 0x08300000 (0x0001aadc)
kernel   @ 0x00280000 (0x01dc380ion
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831dadb
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding ize: 0xede00000)
physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.193 (root@jensen) (gcc version 11.1.0 (ctng-1.24.0-345g-FA), GNU ld (ctng-1.24.0-345g-FA) 2.36.1) #1 SMP PREEMPT Fri Apr 15 14:51:49 CST 2022
[    0.000000] Machine model: FriendlyElec NanoPC-T4
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
ction IDs
[    0.000000] psci: 00] percpu: Embedded 24 pages/cpu s60264 r8192 d29848 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround forol=1m rw console=ttyFIQ0 root=/dev/mmcblk1p8 rootfstype=ext4 data=/dev/mmcblk1p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] mem auto-initp free:off
[    0.000000] Memory: 3897824K/l code, 2126K rwdata, 4504K roda)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 46710 entries in[    0.000000] rockchip_clk_register_frac_branch: could not findk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not findk_vop1, rate changes may not work
[    0.000000] arch_timer: cp15 ys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002011] Console: colour dummy device 80x25
[    0.002465] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.003401] pid_max: default: 32768 minimum: 301
[    0.003972] Security Framework RCU implementation.
[    0.011923] Platform MSI: interrupt-controller@fee20000 domain created
[    0.013082] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.014800] smp: Bringing up secondary CPUs ...
[    0.015913] Detected VIPT I-cache on CPU1
[    0.015946] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.015989] CPU1: using LPI pending table @0x00000000f1bc0000
[dary processor 0x0000000001 [0x410fd034]
[    0.016891] Detecte16916] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.016955] CPU2: using LPI pending table @0x00000000f1be0000
[    0.016992] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.017737] Detected VIPT I-cache on CPU3
[    0.017761] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.017804] CPU3: using LPI pending table @0x00000000f1000000
[    0.017836] CPU3: Booted secondary process   0.018593] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
bling workaround for EL2 vector 00000100 [0x410fd082]
[    0.019465] Detected PIPT I-cache on C0:0x00000000fefa0000
[    0.019535] CPU5: using LPI pending table @0x00000000f1060000
[    0.019564] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.019684] smp: Brought up 1 node, 6 CPUs
[    0.031761] CPU features: detected: 32-bit EL0 Support
PAN) using TTBR0_EL1 switching
arrier emulation handler
[    0 image as initramfs...
[    0.061073] Registered setend emulatile_ns: 6370867519511994 ns
[    0.062845] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.063877] pinctrl core:rotocol family 16
[    0.065938rt 6 boost groups
[    0.066732[    0.068441] audit: type=2000 audit(0.063:1): state=initializemenu
[    0.069585] Registered FIQ tty driver
[    0.070163] hw-breakpoint: found 6 breakpoint[    0.072519] DMA: preallocated: Registered ramoops as persiste ramoops: attached 0xf0000@0x110000, ecc: 0/0
000.gpio0)
[    0.104595] rockcio2: probed gpio2 (ff780000.gpio2)
[    0.106882] rockchip-gpio ff788000.gpio3: probed gpio3 (ff788000.gpio3)
[    0.107991] rockchip-gpio ff790000.gpio4: protrl: probed pinctrl
[    0.118234] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.119235] cryptd: max_cpu_qlen set to 1000
[    0.120997] fiq debugger fiq mode enabled
[    0.121632] console [ttyFIQ0] enabled
[    0.121993] bootconsole [uart8250] disabled
[    0.121632] console [ttyFIQ0] enabled
[    0.121993] bootconsole [uart8250] disabled
[    0.122579] Registered fiq debugger ttyFIQ0
[    0.150080] vcc_lcd: supplied by vcc5v0_sys
[    0.150792] rk_iommu ff650800.iommu: version = 1
[    0.151296] rk_iommu ff660480.iommu: version = 1
[    0.151644] rk_iommu ff670800.iommu: version = 1
[    0.152007] rk_iommu ff8f3f00.iommu: version = 1
[    0.152276] rk_iommu ff903f00.iommu: version = 1
[    0.152539] rk_iommu ff914000.iommu: version = 1
[    0.152864] rk_iommu ff924000.iommu: version = 1
[    0.153520] SCSI subsystem initialized
[    0.153732] usbcore: registered new interface driver usbfs
[    0.153774] usbcore: registered new interface driver hub
[    0.153820] usbcore: registered new device driver usb
[    0.154161] media: Linux media interface: v0.10
[    0.154191] videodev: Linux video capture interface: v2.00
[    0.154261] pps_core: LinuxPPS API ver. 1 registered
[    0.154271] pps_core: Software ve[    0.211135] VFS: Disk quotas dquot_6.6.0
[    0.211253] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.211371] FS-Cache: Loaded
[    0.220397] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.220660] NET: Registered protocol family 2
[    0.221350] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes)
[    0.221445] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.221748] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.222571] TCP: Hash tables configured (established 32768 bind 32768)
[    0.222735] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.222902] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.223240] NET: Registered protocol family 1
[    0.223681] RPC: Registered named UNIX socket transport module.
[    0PC: Registered tcp transport module.
[    0.223726] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.225533] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.225863] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.227634] Initialise system trusted keyrings
[    0.231791] workingset: timestamp_bits=45 max_order=20 bucket_order=0
[    0.238055] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.238436] Registering sdcardfs 0.1
[    0.238668] FS-Cache: Netfs 'nfs' registered for caching
[    0.239142] NFS: Registering the id_resolver key type
[    0.239177] Key type id_resolver registered
[    0.239197] Key type id_legacy registered
[    0.239214] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.239235] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.239449] fuse init (API version 7.27)
[    0.240020] 
[    0.240020] TEE Core Framework initialization (ver 1:0.1)
[    0.240052] TEE armv7 Driver initialization
[    0.240534] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.240548] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.240726] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.241954] Key type asymmetric registered
[    0.241972] Asymmetric key parser 'x509' registered
[    0.242013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.242167] io scheduler noop registered
[    0.242365] io scheduler cfq registered (default)
[    0.242381] io scheduler mq-deadline registered
[    0.242391] io scheduler kyber registered
[    0.242495] io scheduler bfq registered
[    0.244667] phy phy-ff770000.syscon:usb2-phy@e460.1: Linked as a consumer to regulator.2
[    0.245151] phy phy-ff770000.syscon:usb2-phy@e460.2: No vbus specified for otg port
[    0.246796] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: invalid resource
[    0.252913] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    0.253084] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    0.253112] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.253137] rockchip-pcie f80st bridge /pcie@f8000000 ranges:s a consumer to regulator.0
[    0.318623] iommu: Adding device ff670000.iep to group 2
[    0.318656] iep ff670000.iep: Linked as a consumer to ff670800.iommu
[    0.318841] iep: failed to find iep power down clock source.
[    0.319307] iep: IEP Power ON
[    0.319355] iep: IEP Power OFF
[    0.319438] iep: IEP Driver loaded succesfully
[    0.319650] iep: Module initialized.
[    0.319823] mpp_service mpp-srv: eccf16e83556 author: Finley Xiao 2021-07-05 soc: rockchip: opp_select: Export rockchip_nvmem_cell_read_u8/u16()
[    0.319841] mpp_service mpp-srv: probe start
[    0.320299] iommu: Adding device ff660000.rkvdec to group 1
[    0.320330] mpp_rkvdec ff660000.rkvdec: Linked as a consumer to ff660480.iommu
[    0.320528] mpp_rkvdec ff660000.rkvdec: probing start
[    0.320932] rkvdec_init:1219: failed on clk_get clk_hevc_cabac
[    0.321014] mpp_rkvdec ff660000.rkvdec: shared_video_hevc_cabac is not found!
[    0.321031] rkvdec_init:1250: No hevc cabac reset resource define
[    0.321235] mpp_rkvdec ff660000.rkvdec: probing finish
[    0.322538] iom8] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[    0.323394] mpp_vdpu2 ff650400.vdpu: probing finish
[    0.323841] iommu: Adding device ff650000.vepu to group 0
[    0.323871] mpp_vt_group->rw_sem_on=0
[    0.324490] mpp_vepu2 ff650000.vepu: probing finish
[    0.325458] mpp_service mpp-srv: probe success
[    0.329091] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.329112] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.330460] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.330486] dma-pl330 ff6e0000.dma-c_Chans-8 Num_Peri-20 Num_Events-16
[    0.331957] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    0.332567] vdd_log: supplied by regulator-dummy
[    0.333097] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.333755] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 40, base_baud = 1500000) is a 16550A
[    0.334327] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 42, base_baud = 1500000) is a 16550A
[    0.336953] random: fast init done
[    0.337246] random: crng init done
[    0.337701] iommu: Adding device ff8f0000.vop to group 3
[    0.337756] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
[    0.338463] iommu: Adding device ff900000.vop to group 4
[    0.338497] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
[    0.342889] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[    0.342928] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[    0.343879] rockchip-drm display-subsystem: Linked as a consumer to ff970000.edp
[    0.344014] rockchip-drm display-subsystem: Linked as a consumer to fec00000.dp
[    0.344446] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[    0.347693] panel-friendlyelec edp-egulator.6
[    0.350102] midgard ff9a0000.gpu: Failed to get regulator
[    0.350124] midgard ff9a0000.gpu: Power control initialization failed
[    0.350491] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.354540] brd: module loaded
.ethernet: cannot get clock clk_mac_speed
[    0.371478] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    0.376496] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    0.376739] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    0.376759] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    0.376773] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    0.376789] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    0.376800] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    0.376814] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    0.376824] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    0.376862] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    0.376876] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    0.376886] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    0.428661] Freeing initrd merobed
[    0.466959] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    0.466974] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    0.468469] PPP generic driver version 2.4.2
[    0.468674] usbcore: registered new interface driver asix
[    0.468723] usbcore: registered new interface driver ax88179_178a
[    0.468758] usbcore: registered new interface driver cdc_ether
[    0.468791] usbcore: registered new interface driver rndis_host
[    0.468827] usbcore: registered new interface driver qmi_wwan
[    0.469849] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    0.471077] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[    0.475524] nvme nvme0: missing or invalid SUBNQN field.
[    0.476124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.476152] ehci-pci: EHCI PCI platform driver
[    0.476212] ehci-platform: EHCI generic platform driver
[    0.481735] ehci-platform fe3c0000.usb: EHCI Host Controller
[    0.481793] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    0.482412] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    0.489991] nvme nvme0: allocated 32 MiB host memory buffer.
[    0.495070] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    0.495343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.495365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.495378] usb usb1: Product: EHCI Host Controller
[    0.495389] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd
[    0.495405] usb usb1: SerialNumber: fe3c0000.usb
[    0.495905] hub 1-0:1.0: USB hub found
[    0.495951] hub 1-0:1.0: 1 port detected
[    0.496708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.496745] ohci-platform: OHCI generic platform driver
[    0.497168] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    0.497191] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    0.497490] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    0.498898]  nvme0n1:
[    0.555860] usb usb2: New USBProduct=0001, bcdDevice= 4.19
[    0.555882] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.555894] usb usb2: Product: Generic Platform OHCI controller
[    0.555905] usb usb2: Manufacturer: Linux 4.19.193 ohci_hcd
[    0.555915] usb usb2: SerialNumber: fe3e0000.usb
[    0.556370] hub 2-0:1.0: USB hub found
[    0.556457] hub 2-0:1.0: 1 port detected
[    0.557990] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    0.558032] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    0.558944] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000009002030010
[    0.559002] xhci-hcd xhci-hcd.1.auto: irq 80, io mem 0xfe900000
[    0.559322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.559337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.559349] usb usb3: Product: xHCI Host Controller
[    0.559366] usb usb3: Manufacturer: Linux 4.19.193 xhci-hcd
[    0.559382] usb usb3: SerialNumber: xhci-hcd.1.auto
[    0.559798] hub 3-0:1.0: USB hub found
[    0.559845] hub 3-0:1.0: 1 port detected
[    0.560128] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    0.560154] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    0.560177] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    0.560248] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.560364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    0.560382] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560397] usb usb4: Product: xHCI Host Controller
[    0.560411] usb usb4: Manufacturer: Linux 4.19.193 xhci-hcd
[    0.560425] usb usb4: SerialNumber: xhci-hcd.1.auto
[    0.560790] hub 4-0:1.0: USB hub found
[    0.560833] hub 4-0:1.0: 1 port detected
[    0.561204] usbcore: registered new interface driver cdc_acm
[    0.561221] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.561268] usbcore: registered new interface driver cdc_wdm
[    0.561503] usbcore: registered new interface driver uas
[    0.561636] usbcore: registered new interface driver usb-storage
[    0.561769] usbcore: registered new interface driver usbserial_generic
[    0.561814] usbserial: USB Serial support registered for generic
[    0.561901] usbcore: registered new interface driver ch341
[    0.561941] usbserial: USB Serial support registered for ch341-uart
[    0.562002] usbcore: registered new interface driver cp210x
[    0.562041] usbserial: USB Serial support registered for cp210x
[    0.562150] usbcore: registered new interface driver ftdi_sio
[    0.562193] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.562345] usbcore: registered new interface driver option
[    0.562382] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.562528] usbcore: registered new interface driver pl2303
[    0.562600] usbserial: USB Serial support registered for pl2303
[    0.562666] usbcore: registered new interface driver qcserial
[    0.562705] usbserial: USB Serial support registered for Qualcomm USB modem
[    0.563080] mousedev: PS/2 mouse device common for all mice
[    0.563908] <<-GTP-INFO->> GTP driver installing
[    0.564303] .. rk pwm remotectl v2.0 init
[    0.564529] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    0.564902] remotectl-pwm ff420030.pwm: pwm version is 0x1000000
[    0.564928] remotectl-pwm ff420030.pwm: pwm version is less v2.0
[    0.564971] remotectl-pwm ff420030.pwm: Support ATF Wakeup
[    0.566978] i2c /dev entries driver
[    0.571153] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    0.572251] vdd_cpu_b: supplied by vcc3v3_sys
[    0.572951] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    0.574014] vdd_gpu: supplied by vcc3v3_sys
[    0.574730] rk808 0-001b: chip id: 0x0
[    0.578651] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    0.578688] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    0.579536] vdd_center: supplied by vcc3v3_sys
[    0.580197] vdd_cpu_l: supplied by vcc3v3_sys
[    0.580466] vcc_ddr: supplied by vcc3v3_sys
[    0.581024] vcc_1v8: supplied by vcc3v3_sys
[    0.581861] vcc1v8_dvp: supplied by vcc3v3_sys
[    0.582400] vcc3v0_tp: supplied by vcc3v3_sys
[    0.583077] vcc1v8_pmu: supplied by vcc3v3_sys
[    0.583775] vccio_sd: supplied by vcc3v3_sys
[    0.584325] vcca3v0_codec: supplied by vcc3v3_sys
[    0.585022] vcc_1v5: supplied by vcc3v3_sys
[    0.585577] vcca1v8_codec: supplied by vcc3v3_sys
[    0.586272] vcc_3v0: supplied by vcc3v3_sys
[    0.586669] vcc3v3_s3: supplied by vcc3v3_sys
[    0.587088] vcc3v3_s0: supplied by vcc3v3_sys
[    0.590225] rk808-rtc rk808-rtc: registered as rtc0
[    0.590761] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:53:48 UTC (1358499228)
[    0.591903] fusb302 4-0022: Can't get property of role, set role to default DRP
[    0.594984] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[    0.595134] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input1
[    0.596147] dw9718 1-000c: probing...
[    0.596169] dw9718 1-000c: could not get module rockchip,vcm-start-current from dts!
[    0.596183] dw9718 1-000c: could not get module rockchip,vcm-rated-current from dts!
[    0.596198] dw9718 1-000c: could not get module rockchip  0.599040] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    0.599276] rkisp1 ff920000.rkisp1: Entity type for entity    0.601799] rockchip-iodomain ff770000.syscon:io-domains: audio(1800000 uV) supplied by vcca1v8_codec
[    0.601880] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to ren:io-domains: Linked as a consumer to regulator.21
[    0.602040] rockchip-iodomain ff770000.syscon:io-domains: gpio1830(3000000 uV) supplied by vcc_3v0
[    0.603297] __power_supply_register: Expected proper parent device for 'test_ac'
[    0.603464] __power_supply_register: Expectedctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.607410] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: 
[    0.607691] cpu cpu0: bin=1
[    0.607732] cpu cpu0: leakage=17
[    0.607837] cpu cpu0: Linked as a consumer to regulator.11
[    0.619709] cpu cpu0: temp=32222, pvtm=144644 (145679 + -1035)
[    0.619946] cpu cpu0: Dropping the link to regulator.11
[    0.619994] cpu cpu0: pvtm-volt-sel=1
[    0.620019] cpu cpu0: bin-scale=34
[    0.620099] cpu cpu4: bin=1
[    0.620130] cpu cpu4: leakage=29
[    0.620216] cpu cpu4: Linked as a consumer to regulator.8
[    0.632184] cpu cpu4: temp=31666, pvtm=151777 (152487 + -710)
[    0.632316] cpu cpu4: Dropping the link to regulator.8
[    0.632358] cpu cpu4: pvtm-volt-sel=1
[    0.632382] cpu cpu4: bin-scale=17
[    0.632690] cpu cpu0: Linked as a consumer to regulator.11
[    0.632751] cpu cpu0: Dropping the link to regulator.11
[    0.632899] cpu cpu0: Linked as a consumer to regulator.11
[    0.633518] cpu cpu0: avs=0
[    0.633759] cpu cpu0: l=0 h=2147483647 hyst=5000 l_lier to regulator.8
[    0.635349] cpu cpu4: avs=0
[    0.635400] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[    0.635656] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    0.637534] cpu cpu4: failed to find power_model node
[    0.639176] sdhci: Secure Digital Host ConAC supports 32-bit address mode.
[    0.640504] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[    0.640535] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[    0.640623] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    0.640808] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[    0.640833] mmc_host mmc0: card is non-removable.
[    0.651965] mmc_host mmc0: But req 400000Hz, actual 400000HZ div = 0)
[    0.665546] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    0.665900] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    0.665919] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    0.665970] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    0.666059] dwmmc_rockchip fe320000.mmc: Linked as a consumer to regulator.4
[    0.666137] dwmmc_rockchip fe320000.mmc: Linked as a consumer to regulator.17
[    0.678504] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    0.692007] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.703772] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.717723] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    0.7193.719744] hidraw: raw HID events driver (C) Jiri Kosina
[    0.720117] usbcore: registered new interface driver usbhid
[    0.720126] usbhid: USB HID core driver
[    0.720136] ion_device_add_heap: ion_system_contig_heap id=0 type=1
[    0.720348] ion_device_add_heap: ion_system_heap id=1 type=0
[    0.720364] ion_device_add_heap: reserved id=2 titialized
[    0.724303] rockchip-saradc ff100000.saradc: ff100000.saradc supply vref not found, using dummy regulator
[    0.724388] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.0
[    0.725451] optee: probing for conduit method from DT.
[    0.725483] optee: revision 1.0
[    0.725486] optee: api revision mismatch
 get spk-con-gpio 1
[    0.735365] Initializing XFRM netlink socket
[    0.735415] IPsec XFRM device driver
[    0.735838] NET: Registered protocol family 10
[    0.736891] Segment Routing with IPv6
[    0.741517] mmc2: error -84 whilst initialising MMC card
[    0.742329] bpfilter: Loaded bpfilter_umh pid 101
Started bpfilter
[    0.742791] NET: Registered protocol family 17
[    0.743085] Bluetooth: RFCOMM TTY layer initialized
[    0.743136] Bluetooth: RFCOMM socket layer initialized
[    0.743187] Bluetooth: RFCOMM ver 1.11
[    0.743205] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    0.743224] Bluetooth: HIDP socket layer initialized
[    0.743279] [BT_RFKILL]: Enter rfkill_rk_i593] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    0.744666] [BT_RFKILL]: Request irq for bt wakeup host
[    0.744740] [BT_RFKILL]: BT_WAKE_HOST IRQ fired
[    0.744761] [BT_RFKILL]: ** disable irq
[    0.744871] [BT_RFKILL]: bt shut off power
[    0.768537] [BT_RFKILL]: bt_default device registered.
[    36: driver version: 00.01.08
[    0.772283] ov4689 2-0036: 2-0036 supply avdd not found, using dummy regulator
[    0.772355] ov4689 2-0036: Linked as a consumer to regulator.0
[    0.772400] ov4689 2-0036: 2-0036 supply dovdd not found, using dummy regulator
[    0.772483] ov4689 2-0036: 2-0036 supply dvdd not found, using dummy regulator
[    0.773094] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    0.774412] ov4689 2-0036: Unexpected sensor id(000000), ret(-5)
[    0.775239] ov13850 1-0010: driver version: 00.01.05
[    0.775322] ov13850 1-0010: Failed to get power-g1-0010 supply dvdd not found, using dummy regulator
[    0.779972] ov13850 1-0010: Unexpected sensor id(000000), ret(-5)
[    0.780569] ov13850 2-0010: driver version: 00.01.05
[    0.780645] ov13850 2-0010: Failed to get power-gpios, maybe no use
[    0.780723] ov13850 2-0010: 2-0010 supply avdd not found, using dummy regulator
[    0.780775] omer to regulator.0
[    0.780807] ov13850 2-0010: 2-0010 supply dovdd not found, using dummy regulator
[    0.780878] ov13850 2-0010: 2-0010 supply dvdd not found, using dummy regulator
[    0.784840] ov13850 2-0010: Unexpected sensor id(000000), ret(-5)
[    0.786011] registered taskstats version 1
[    0.786058] Loading compiled-in X.509 certificates
[    0.786166] Key type ._fscrypt registered
[    0.786182] Key type .fscrypt registered
[    0.786195] Key type fscrypt-provisioning registered
[    0.786444] pstore: Using compression: deflate
[    0.787269] rga2: Driver loaded successfully ver:3.2.18218
[    0.787553] rga2: Module initialized.
[    0.820823] phy phy-ff770000.syscon:usb2-phy@e450.9: Linked as a consumer to regulator.2
[    0.821981] phy phy-ff770000.syscon:usb2-phy@e450.10: No vbus specified for otg port
[    0.825352] rockchip-drm display-subsystem: defer getting devfreq
[    0.825521] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    0.825633] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008feeb40)
[    0.825696] rockchip-vop ff900000.vop: missing rockchip,grf property
[    0.825830] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008feeb40)
[    0.825872] rockchip-dp ff970000.edp: no DP phy configured
[    0.826647] rockchip-drm display-subsystem: bo970)
[    0.827220] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    0.827439] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[    0.828978] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ffa160)
[    0.828998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.829009] [drm] No driver support for vblank timestamp query.
[    0.829215] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[    0.829277] rockchip-drm display-subsystem: connector[eDP-1] can't found any modes
[    0.829291] rockchip-drm display-subsystem: can't not find any loader display
[    0.829304] rockchip-drm display-subsystem: failed to show loader logo
[    0.829328] [drm] Cannot find any crtc or sizes
[    0.829542] [drm] Cannot find any crtc or sizes
[    0.829911] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[    0.830286] midgard ff9a0000.gpu: Linked as a consumer to regulator.9
[    0.830331] midgard ff9a0000.gpu: leakage=23
=1
[    0.855482] midgard ff9a0000.gpu: avs=0
[    0.855805] midgard ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    0.855897] midgard ff9a0000.gpu: Protected mode not available
[    0.856229] midgard ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    0.856272] midgard ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    0.856353] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 417; [Func] : midgard_kbase_devfreq_init(); success initing power_model_simple.
[    0.856871] midgard ff9a0000.gpu: Probed as mali0
[    0.857222] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    0.866416] ehci-platform fe380000.usb: EHCI Host Controller
[    0.866448] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    0.866761] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    0.878389] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    0.878397] mmc2: error -84 whilst initialising MMC card
[    0.878546] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.878559] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.878570] usb usb5: Product: EHCI Host Controller
[    0.878579] usb usb5: Manufacturer: Linux 4.19.193 ehci_hcd
[    0.878588] usb usb5: SerialNumber: fe380000.usb
[    0.878938] hub 5-0:1.0: USB hub found
[    0.878968] hub 5-0:1.0: 1 port detected
[    0.879466] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    0.879487] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    0.879723] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    0.884995] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    0.911389] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 199
[    0.924442] mmc0: new ultra hnput/input4
[    0.978905] mmc2: error -84 whilst initialising MMC card
[    0.979726] rkisp1 ff910000.rkisp1: clear unready subdev num: 3
[    0.980182] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    0.980200] rkisp1: update sensor failed
[    0.980214] rkisp1 ff920000.rkisp1: clear unready subdev num: 2
[    0.980668] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    0.980687] rkisp1: update sensor failed
[    0.980864] ALSA device list:
[    0.980880]   #0: rockchip,hdmi
[    0.980888ing Kernel Trace File System...
         Mounting Kernel Trace File System...
 Snapshots...
tcher daemon for systemd-networkd...
ning for Raise network interfaceM
[    **] A start job is running for Ras)
M
[     *] A starrk interfaces (15s / 32s)
M
[   ***] A start job is runM
[**[0M
[**    ] A start job is running foning for Raise network interfaceM
[ **se network interfaces (36s / 37s)
M
[   ***] A start job is running for Raise network interfaces (37s / 37s)
M
[  *** ] A start job is running for Raise network interfaces (37s / 37s)


NanoPC-T4 login: