Last active
May 20, 2022 18:34
-
-
Save daiaji/bc1c42ad74e3bd70da3c444aba3a458e to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| � | |
| U-Boot TPL 2021.10-2 (Dec 25 2021 - 23:04:28) | |
| Channel 0: LPDDR3, 933MHz | |
| BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB | |
| Channel 1: LPDDR3, 933MHz | |
| BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB | |
| 256B stride | |
| Trying to boot from BOOTROM | |
| Returning to boot ROM... | |
| U-Boot SPL 2021.10-2 (Dec 25 2021 - 23:04:28 +0000) | |
| Trying to boot from MMC2 | |
| ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ | |
| U-Boot 2021.10-2 (Dec 25 2021 - 23:04:28 +0000) Manjaro Linux ARM | |
| SoC: Rockchip rk3399 | |
| Reset cause: POR | |
| Model: FriendlyElec NanoPC-T4 | |
| DRAM: 3.9 GiB | |
| PMIC: RK808 | |
| MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0 | |
| Loading Environment from MMC... *** Warning - bad CRC, using default environment | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Model: FriendlyElec NanoPC-T4 | |
| Net: | |
| Error: ethernet@fe300000 address not set. | |
| No ethernet found. | |
| Hit any key to stop autoboot: 2 1 0 | |
| Card did not respond to voltage select! : -110 | |
| switch to partitions #0, OK | |
| mmc0(part 0) is current device | |
| Scanning mmc 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 258 bytes read in 15 ms (16.6 KiB/s) | |
| 1: Manjaro ARM | |
| Retrieving file: /initramfs-linux.img | |
| 7908309 bytes read in 766 ms (9.8 MiB/s) | |
| Retrieving file: /Image | |
| 30362112 bytes read in 2906 ms (10 MiB/s) | |
| append: rootflags=subvol=@ initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=dcee78f5-50ba-42e0-b267-8179689bc7a4 rw rootwait audit=0 splash plymouth.ignore-serial-consoles | |
| Retrieving file: /dtbs/rockchip/rk3399-nanopc-t4.dtb | |
| 78058 bytes read in 33 ms (2.3 MiB/s) | |
| Moving Image from 0x2080000 to 0x2200000, end=3fd0000 | |
| ## Flattened Device Tree blob at 01f00000 | |
| Booting using the fdt blob at 0x1f00000 | |
| Loading Ramdisk to f178c000, end f1f16bd5 ... OK | |
| Loading Device Tree to 00000000f1775000, end 00000000f178b0e9 ... OK | |
| Starting kernel ... | |
| [ 1.222962] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP | |
| [ 1.223631] Modules linked in: | |
| [ 1.223906] CPU: 3 PID: 69 Comm: kworker/u12:1 Not tainted 5.17.9-1-MANJARO-ARM #1 | |
| [ 1.224571] Hardware name: FriendlyElec NanoPC-T4 (DT) | |
| [ 1.225023] Workqueue: events_unbound deferred_probe_work_func | |
| [ 1.225550] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
| [ 1.226162] pc : rockchip_pcie_rd_conf+0xb0/0x220 | |
| [ 1.226583] lr : rockchip_pcie_rd_conf+0xe8/0x220 | |
| [ 1.227001] sp : ffff80000a30b850 | |
| [ 1.227293] x29: ffff80000a30b850 x28: ffff000004b61800 x27: 0000000000000001 | |
| [ 1.227924] x26: 0000000000000000 x25: ffff000004b630e0 x24: ffff800009d66bc8 | |
| [ 1.228556] x23: 0000000000000000 x22: ffff80000a30b964 x21: ffff80000a30b8c4 | |
| [ 1.229187] x20: ffff80000c100000 x19: 0000000000000004 x18: ffffffffffffffff | |
| [ 1.229818] x17: 6572202c295d3030 x16: 2d3030207375625b x15: ffff000001467a1c | |
| [ 1.230450] x14: ffffffffffffffff x13: ffff000001467290 x12: ffff000004b61818 | |
| [ 1.231082] x11: 0000000000000028 x10: 0101010101010101 x9 : 0000000000000689 | |
| [ 1.231713] x8 : 000000003d4d554e x7 : ffff000004cedb80 x6 : 0000000000000000 | |
| [ 1.232343] x5 : 0000000000000001 x4 : 0000000000000000 x3 : 0000000000c00008 | |
| [ 1.232972] x2 : 000000000080000a x1 : ffff80000fc00008 x0 : ffff80000fc0000c | |
| [ 1.233604] Call trace: | |
| [ 1.233823] rockchip_pcie_rd_conf+0xb0/0x220 | |
| [ 1.234212] pci_bus_read_config_dword+0x7c/0xe0 | |
| [ 1.234623] pci_bus_generic_read_dev_vendor_id+0x34/0x1b0 | |
| [ 1.235109] pci_scan_single_device+0xa0/0x13c | |
| [ 1.235504] pci_scan_slot+0x40/0x120 | |
| [ 1.235831] pci_scan_child_bus_extend+0x58/0x33c | |
| [ 1.236247] pci_scan_bridge_extend+0x314/0x5a0 | |
| [ 1.236648] pci_scan_child_bus_extend+0x208/0x33c | |
| [ 1.237072] pci_scan_root_bus_bridge+0x68/0xdc | |
| [ 1.237473] pci_host_probe+0x18/0xc4 | |
| [ 1.237800] rockchip_pcie_probe+0x384/0x524 | |
| [ 1.238180] platform_probe+0x68/0xe0 | |
| [ 1.238509] really_probe+0x1bc/0x440 | |
| [ 1.238834] __driver_probe_device+0x114/0x190 | |
| [ 1.239226] driver_probe_device+0x40/0x100 | |
| [ 1.239596] __device_attach_driver+0x98/0x130 | |
| [ 1.239990] bus_for_each_drv+0x78/0xd0 | |
| [ 1.240329] __device_attach+0xdc/0x1c0 | |
| [ 1.240670] device_initial_probe+0x14/0x20 | |
| [ 1.241040] bus_probe_device+0x98/0xa0 | |
| [ 1.241379] deferred_probe_work_func+0xb4/0x10c | |
| [ 1.241787] process_one_work+0x1c0/0x340 | |
| [ 1.242143] worker_thread+0x1f0/0x430 | |
| [ 1.242476] kthread+0xe4/0xf0 | |
| [ 1.242751] ret_from_fork+0x10/0x20 | |
| [ 1.243073] Code: f94013f5 a8c37bfd d50323bf d65f03c0 (b9400294) | |
| [ 1.243609] ---[ end trace 0000000000000000 ]--- | |
| [ 1.244014] note: kworker/u12:1[69] exited with preempt_count 1 | |
| [ 1.269178] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) | |
| [ 1.413258] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 188 | |
| [ 1.416751] mmc0: new ultra high speed SDR104 SDIO card at address 0001 | |
| � |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment