[Home Assistant] Verizon MiFi Jetpack 8800L

configuration.yaml

# IMPORTANT: Enable the package in `configuration.yaml`
# @see https://www.home-assistant.io/docs/configuration/packages/

# Option 1: Include all files inside `config/packages` as package files:
homeassistant:
  packages: !include_dir_named packages

# Option 2: Use `packages/jetpack_8800l.yaml` file directly from `config/packages` folder:
homeassistant:
  packages:
    jetpack_8800l: !include packages/jetpack_8800l.yaml

# Option 3: Create `jetpack_8800l.yaml` file in the same directory as `configuration.yaml`:
homeassistant:
  packages:
    jetpack_8800l: !include jetpack_8800l.yaml

jetpack_8800l.yaml

# ==============================================================================
# Packages / Jetpack 8800L
# @file packages/jetpack_8800l.yaml
#
# IMPORTANT: Enable packages in `configuration.yaml`
# @see https://www.home-assistant.io/docs/configuration/packages/
#
# @notes Set `input_text.jetpack_8800l_host` to the IP address of your Verizon
#            Jetpack hotspot.
# @notes Set `input_number.jetpack_8800l_data_cap` to the amount of data that
#            you are allotted. This is usually either 100GB or 150GB in the US.
# ==============================================================================

# ==============================================
# Input Text
# ==============================================

input_text:
  jetpack_8800l_host:
    name: Jetpack 8800L Host
    icon: mdi:server

# ==============================================
# Input Number
# ==============================================

input_number:
  jetpack_8800l_data_cap:
    name: Jetpack 8800L Data Cap
    icon: mdi:swap-horizontal
    initial: 150
    min: 0
    max: 1000
    step: 1
    mode: box
    unit_of_measurement: GB

# ==============================================
# Sensor
# ==============================================

sensor:

  # ==============================
  # Usage Info
  # ==============================

  - platform: rest
    name: Jetpack 8800L Usage
    unique_id: jetpack_8800l_usage
    resource_template: "http://{{ states('input_text.jetpack_8800l_host') }}/apps_home/usageinfo/"
    value_template: "OK"
    json_attributes:
      - allowance
      - barLevelLineUsage
      - barLevelTotalShrUsage
      - barPercentageLineUsage
      - barPercentageTotalShrUsage
      - cycleEndDt
      - daysLeft
      - gBaseAssetsPath
      - gHelpURL
      - gHtmlLang
      - gIsLoggedIn
      - gLangDirection
      - gLocale
      - gPageId
      - gProductName
      - gProductNumber
      - gSecureToken
      - isHidden
      - lineUsage
      - planType
      - remainingUsage
      - totalShrUsage
      - unit
      - usageInformationState
      - usageTimestamp

  # ==============================
  # Status Info
  # ==============================

  - platform: rest
    name: Jetpack 8800L Status
    unique_id: jetpack_8800l_status
    resource_template: "http://{{ states('input_text.jetpack_8800l_host') }}/srv/status"
    value_template: "OK"
    json_attributes_path: "$.statusData"
    json_attributes:
      - statusBarAirplaneMode
      - statusBarBatteryChargingSource
      - statusBarBatteryChargingState
      - statusBarBatteryDetection
      - statusBarBatteryPercent
      - statusBarBytesReceived
      - statusBarBytesTotal
      - statusBarBytesTransmitted
      - statusBarClientListSize
      - statusBarConnectionDuration
      - statusBarConnectionState
      - statusBarFemtoCellStatus
      - statusBarGpsStatus
      - statusBarGuestClientListSize
      - statusBarGuestWifiEnabled
      - statusBarMaxWiFiClientListSize
      - statusBarMnsAvailable
      - statusBarMnsInUse
      - statusBarMnsScan
      - statusBarMobileDataEnabled
      - statusBarNetwork
      - statusBarNetworkID
      - statusBarNotificationFlag
      - statusBarPrimaryClientListSize
      - statusBarRoaming
      - statusBarSdCardFreeSpace
      - statusBarSdCardInUse
      - statusBarSdCardStatus
      - statusBarSdCardUsedSpace
      - statusBarSignalBars
      - statusBarSimStatus
      - statusBarSmsUnreadCount
      - statusBarTechnology
      - statusBarTechnologyText
      - statusBarTrafficStatus
      - statusBarWiFiClientListSize
      - statusBarWiFiEnabled

# ==============================================
# Template
# ==============================================

template:

  # ==============================
  # Calculated Sensors
  # ==============================

  - sensor:
      - name: Jetpack 8800L Cycle Days
        unique_id: jetpack_8800l_usage_cycleDays
        icon: mdi:calendar-month
        unit_of_measurement: days
        # device_class: duration
        state: >-
          {% set dt = strptime(states('sensor.jetpack_8800l_cycle_end_date'), '%Y-%m-%d', as_datetime(0)) %}
          {{ (dt.replace(day=1) - timedelta(days=1)).day }}

      - name: Jetpack 8800L Days Used
        unique_id: jetpack_8800l_usage_daysUsed
        icon: mdi:calendar-clock
        unit_of_measurement: days
        # device_class: duration
        state: >-
          {{ states('sensor.jetpack_8800l_cycle_days') | int(0) - states('sensor.jetpack_8800l_days_left') | int(0) }}

      - name: Jetpack 8800L Daily Threshold
        unique_id: jetpack_8800l_usage_dailyThreshold
        icon: mdi:calendar-month
        unit_of_measurement: GB
        state: >-
          {{ (states('input_number.jetpack_8800l_data_cap') | float(0) / states('sensor.jetpack_8800l_cycle_days') | int(0) | default(-99, true)) | round(2) }}

      - name: Jetpack 8800L Data Remaining
        unique_id: jetpack_8800l_usage_dataRemaining
        icon: mdi:database-clock
        unit_of_measurement: GB
        state: >-
          {{ (states('input_number.jetpack_8800l_data_cap') | float(0) - states('sensor.jetpack_8800l_data_usage') | float(0)) | round(2) }}

      - name: Jetpack 8800L Daily Allowance
        unique_id: jetpack_8800l_usage_dailyAllowance
        icon: mdi:calendar-month
        unit_of_measurement: GB
        state: >-
          {{ (states('sensor.jetpack_8800l_data_remaining') | float(0) / states('sensor.jetpack_8800l_days_left') | int(0) | default(-99, true)) | round(2) }}

      - name: Jetpack 8800L Average Daily Usage
        unique_id: jetpack_8800l_usage_avgDailyUsage
        icon: mdi:gauge
        unit_of_measurement: GB
        state: >-
          {{ (states('sensor.jetpack_8800l_data_usage') | float(0) / (states('sensor.jetpack_8800l_days_used') | int(0) | default(-99, true))) | round(2) }}

  # ==============================
  # Usage Info Sensors
  # ==============================

  - sensor:
      - name: Jetpack 8800L Allowance
        unique_id: jetpack_8800l_usage_allowance
        icon: mdi:wan
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ state_attr('sensor.jetpack_8800l_usage', 'allowance') }}
          {% else %}
            {{ states('sensor.jetpack_8800l_allowance') }}
          {% endif %}

      - name: Jetpack 8800L Cycle End Date
        unique_id: jetpack_8800l_usage_cycleEndDt
        icon: mdi:calendar-refresh
        device_class: date
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ strptime(state_attr('sensor.jetpack_8800l_usage', 'cycleEndDt'), '%m/%d/%Y', '2001-01-01' | as_datetime).strftime('%Y-%m-%d') }}
          {% else %}
            {% if states('sensor.jetpack_8800l_cycle_end_date') in ['unknown', 'unavailable'] %}
              2001-01-01
            {% else %}
              {{ states('sensor.jetpack_8800l_cycle_end_date') }}
            {% endif %}
          {% endif %}

      - name: Jetpack 8800L Days Left
        unique_id: jetpack_8800l_usage_daysLeft
        icon: mdi:calendar-clock
        unit_of_measurement: days
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ state_attr('sensor.jetpack_8800l_usage', 'daysLeft') }}
          {% else %}
            {{ states('sensor.jetpack_8800l_days_left') }}
          {% endif %}

      - name: Jetpack 8800L Data Usage
        unique_id: jetpack_8800l_usage_totalShrUsage
        icon: mdi:wan
        unit_of_measurement: GB
        state_class: total_increasing
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ state_attr('sensor.jetpack_8800l_usage', 'totalShrUsage') | round(2) }}
          {% else %}
            {{ states('sensor.jetpack_8800l_data_usage') }}
          {% endif %}

      - name: Jetpack 8800L Usage Unit
        unique_id: jetpack_8800l_usage_unit
        icon: mdi:wan
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ state_attr('sensor.jetpack_8800l_usage', 'unit') }}
          {% else %}
            {{ states('sensor.jetpack_8800l_usage_unit') }}
          {% endif %}

      - name: Jetpack 8800L Usage Timestamp
        unique_id: jetpack_8800l_usage_usageTimestamp
        icon: mdi:wan
        device_class: date
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') %}
            {{ strptime(state_attr('sensor.jetpack_8800l_usage', 'usageTimestamp'), '%m/%d/%Y', '2001-01-01' | as_datetime).strftime('%Y-%m-%d') }}
          {% else %}
            {% if states('sensor.jetpack_8800l_usage_timestamp') in ['unknown', 'unavailable'] %}
              2001-01-01
            {% else %}
              {{ states('sensor.jetpack_8800l_usage_timestamp') }}
            {% endif %}
          {% endif %}

  # ==============================
  # Status Info Sensors
  # ==============================

  - sensor:

      # ==============
      # Battery
      # ==============

      - name: Jetpack 8800L Battery Charging Source
        unique_id: jetpack_8800l_status_BatteryChargingSource
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingSource') | lower %}
          {% set icons = {
            'chargingsourceac': 'mdi:power-plug',
            'chargingsourceusb': 'mdi:usb-port',
            'chargingsourcenone': 'mdi:power-plug-off'
          } %}
          {{ icons[icon_key] | default('mdi:power-plug-off') }}
        state: >-
          {% if is_state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingSource', 'ChargingSourceAC') %}
            AC
          {% elif is_state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingSource', 'ChargingSourceUSB') %}
            USB
          {% elif is_state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingSource', 'ChargingSourceNone') %}
            None
          {% else %}
            {{ state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingSource') }}
          {% endif %}

      - name: Jetpack 8800L Battery Level
        unique_id: jetpack_8800l_status_BatteryPercent
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryPercent') }}

      # ==============
      # Connection
      # ==============

      - name: Jetpack 8800L Connection Duration
        unique_id: jetpack_8800l_status_ConnectionDuration
        icon: mdi:web-clock
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarConnectionDuration') }}
        unit_of_measurement: seconds

      - name: Jetpack 8800L Connection State
        unique_id: jetpack_8800l_status_ConnectionState
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_status', 'statusBarConnectionState') | lower %}
          {% set icons = {
            'initializing': 'mdi:web-sync',
            'searching': 'mdi:web-sync',
            'ready': 'mdi:web-check',
            'connecting': 'mdi:web-sync',
            'connected': 'mdi:web-check',
            'dormant': 'mdi:web-clock',
            'disconnecting': 'mdi:web-minus',
            'activation in progress': 'mdi:web-sync',
            'no service': 'mdi:web-off',
            'unactivated': 'mdi:web-off',
            'account restricted (pco 2)': 'mdi:web-cancel',
            'account restricted (pco 2) disconnected': 'mdi:web-cancel',
            'account out of credit (pco 3)': 'mdi:web-cancel',
            'account not active (pco 5)': 'mdi:web-cancel',
          } %}
          {{ icons[icon_key] | default('mdi:web-remove') }}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarConnectionState') }}

      - name: Jetpack 8800L Traffic Status
        unique_id: jetpack_8800l_status_TrafficStatus
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_status', 'statusBarTrafficStatus') | lower %}
          {% set icons = {
            'none': 'mdi:wifi-remove',
            'uplink': 'mdi:wifi-arrow-up',
            'downlink': 'mdi:wifi-arrow-down',
            'uplinkdownlink': 'mdi:wifi-arrow-up-down',
          } %}
          {{ icons[icon_key] | default('mdi:wifi-arrow-up-down') }}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarTrafficStatus') }}

      # ==============
      # WiFi / Devices / Clients
      # ==============

      - name: Jetpack 8800L Clients
        unique_id: jetpack_8800l_status_ClientListSize
        icon: mdi:devices
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarClientListSize') }}
        state_class: measurement

      - name: Jetpack 8800L Primary Clients
        unique_id: jetpack_8800l_status_PrimaryClientListSize
        icon: mdi:devices
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarPrimaryClientListSize') }}
        state_class: measurement

      - name: Jetpack 8800L Guest Clients
        unique_id: jetpack_8800l_status_GuestClientListSize
        icon: mdi:devices
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarGuestClientListSize') }}
        state_class: measurement

      - name: Jetpack 8800L WiFi Clients
        unique_id: jetpack_8800l_status_WiFiClientListSize
        icon: mdi:devices
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarWiFiClientListSize') }}
        state_class: measurement

      - name: Jetpack 8800L Max WiFi Clients
        unique_id: jetpack_8800l_status_MaxWiFiClientListSize
        icon: mdi:devices
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarMaxWiFiClientListSize') }}
        state_class: measurement

      # ==============
      # GPS
      # ==============

      - name: Jetpack 8800L GPS Status
        unique_id: jetpack_8800l_status_GpsStatus
        icon: mdi:crosshairs-gps
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarGpsStatus') | replace('GpsOff', 'Off') }}

      # ==============
      # Network
      # ==============

      - name: Jetpack 8800L Network
        unique_id: jetpack_8800l_status_Network
        icon: mdi:signal
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarNetwork') }}

      - name: Jetpack 8800L Network ID
        unique_id: jetpack_8800l_status_NetworkID
        icon: mdi:signal
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarNetworkID') }}

      - name: Jetpack 8800L Signal
        unique_id: jetpack_8800l_status_SignalBars
        icon: >-
          {% set signal = state_attr('sensor.jetpack_8800l_status', 'statusBarSignalBars') | int(0) %}
          {% if signal >= 3 %}
            mdi:signal-cellular-3
          {% elif signal >= 2 %}
            mdi:signal-cellular-2
          {% elif signal >= 1 %}
            mdi:signal-cellular-1
          {% else %}
            mdi:signal-cellular-outline
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarSignalBars') }}
        unit_of_measurement: bars
        # device_class: signal_strength
        state_class: measurement

      - name: Jetpack 8800L Technology
        unique_id: jetpack_8800l_status_Technology
        icon: mdi:signal
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarTechnology') }}

      - name: Jetpack 8800L Technology Text
        unique_id: jetpack_8800l_status_TechnologyText
        icon: mdi:signal-cellular-3
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarTechnologyText') }}

      # ==============
      # SIM
      # ==============

      - name: Jetpack 8800L SIM Status
        unique_id: jetpack_8800l_status_SimStatus
        icon: mdi:sim
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarSimStatus') }}

      # ==============
      # Notifications
      # ==============

      - name: Jetpack 8800L SMS Unread Count
        unique_id: jetpack_8800l_status_SmsUnreadCount
        icon: >-
          {% if state_attr('sensor.jetpack_8800l_status', 'statusBarSmsUnreadCount') | int(0) %}
            mdi:message-alert
          {% else %}
            mdi:message
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarSmsUnreadCount') }}

  # ==============================================
  # Usage Info Binary Sensors
  # ==============================================

  - binary_sensor:
      - name: Jetpack 8800L Usage Information State
        unique_id: jetpack_8800l_usage_usageInformationState
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_usage', 'usageInformationState') | lower %}
          {% set icons = {
            'unavailable': 'mdi:close-network',
            'available': 'mdi:check-network',
          } %}
          {{ icons[icon_key] | default('mdi:help-network') }}
        state: >-
          {{ is_state_attr('sensor.jetpack_8800l_usage', 'usageInformationState', 'available') }}

  # ==============================================
  # Status Info Binary Sensors
  # ==============================================

  - binary_sensor:

      # ==============
      # Network
      # ==============

      - name: Jetpack 8800L Airplane Mode
        unique_id: jetpack_8800l_status_AirplaneMode
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_status', 'statusBarAirplaneMode') | lower %}
          {% set icons = {
            'airplanemodeon': 'mdi:airplane',
            'airplanemodeoff': 'mdi:airplane-off',
            'lowbatteryoff': 'mdi:airplane-alert'
          } %}
          {{ icons[icon_key] | default('mdi:airplane') }}
        state: >-
          {{ not is_state_attr('sensor.jetpack_8800l_status', 'statusBarAirplaneMode', 'AirplaneModeOff') }}

      - name: Jetpack 8800L Mobile Data Enabled
        unique_id: jetpack_8800l_status_MobileDataEnabled
        icon: >-
          {% if state_attr('sensor.jetpack_8800l_status', 'statusBarMobileDataEnabled') | int(0) %}
            mdi:access-point-network
          {% else %}
            mdi:access-point-network-off
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarMobileDataEnabled') }}

      # ==============
      # Battery
      # ==============

      - name: Jetpack 8800L Battery Charging State
        unique_id: jetpack_8800l_status_BatteryChargingState
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryChargingState') }}
        device_class: battery_charging

      - name: Jetpack 8800L Battery Detection
        unique_id: jetpack_8800l_status_BatteryDetection
        icon: >-
          {% set icon_key = state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryDetection') | lower %}
          {% set icons = {
            'present': 'mdi:battery-check',
            'notpresent': 'mdi:battery-remove',
            'invalid': 'mdi:battery-alert-variant'
          } %}
          {{ icons[icon_key] | default('mdi:battery-alert-variant') }}
        state: >-
          {{ is_state_attr('sensor.jetpack_8800l_status', 'statusBarBatteryDetection', 'Present') }}
        device_class: power

      # ==============
      # WiFi
      # ==============

      - name: Jetpack 8800L WiFi Enabled
        unique_id: jetpack_8800l_status_WiFiEnabled
        icon: >-
          {% if state_attr('sensor.jetpack_8800l_status', 'statusBarWiFiEnabled') | int(0) %}
            mdi:wifi
          {% else %}
            mdi:wifi-off
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarWiFiEnabled') }}

      - name: Jetpack 8800L Guest WiFi Enabled
        unique_id: jetpack_8800l_status_GuestWifiEnabled
        icon: >-
          {% if state_attr('sensor.jetpack_8800l_status', 'statusBarGuestWifiEnabled') | int(0) %}
            mdi:wifi
          {% else %}
            mdi:wifi-off
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarGuestWifiEnabled') }}

      # ==============
      # Notifications
      # ==============

      - name: Jetpack 8800L Notification Flag
        unique_id: jetpack_8800l_status_NotificationFlag
        icon: >-
          {% if state_attr('sensor.jetpack_8800l_status', 'statusBarNotificationFlag') | int(0) %}
            mdi:message-alert
          {% else %}
            mdi:message
          {% endif %}
        state: >-
          {{ state_attr('sensor.jetpack_8800l_status', 'statusBarNotificationFlag') }}

Recommend adding an 'initial' line to the input_text on line 18 for clarity.

input_text:
jetpack_8800l_host:
name: Jetpack 8800L Host
icon: mdi:server
initial: 10.0.0.1 [replace with your device IP]

I also run 2 seperate Jetpack devices and was able to quickly deploy this for both by creating 2 copies of the file, doing a find and replace for 8800L in each, and making the resultant sensors unique (e.g. sensor.jetpack_2_status and sensor.jetpack_2_status, in my case). Modified config entry below for context.

homeassistant:
packages:
jetpack_1: !include jetpack_1.yaml
jetpack_2: !include jetpack_2.yaml

Awesome! I have an Inseego M3000 hotspot and been having a real issue with the battery getting over charged and going into battery preservation mode. Then I sometimes lose the internet connection. My hotspot is in my RV and I have a home assistant server monitoring critical information. I ran across this trying to solve my issue and it works fantastic. I just did a search and replace to update the name and I'm able to get the battery levels and installed a HTC switch on the charger. With a simple automation I now can turn the charger on and off based on this percentage. It just works. Thank you for posting!!