Skip to content

Instantly share code, notes, and snippets.

bypass-tun = 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 59.64.0.0/10, 59.128.0.0/9, 60.0.0.0/10, 60.160.0.0/11, 60.192.0.0/10, 61.0.0.0/10, 61.64.0.0/11, 61.128.0.0/10, 61.224.0.0/11, 100.64.0.0/10, 101.0.0.0/9, 101.128.0.0/11, 101.192.0.0/10, 103.0.0.0/10, 103.192.0.0/10, 106.0.0.0/9, 106.224.0.0/11, 110.0.0.0/7, 112.0.0.0/9, 112.128.0.0/11, 112.192.0.0/10, 113.0.0.0/9, 113.128.0.0/11, 113.192.0.0/10, 114.0.0.0/9, 114.128.0.0/11, 114.192.0.0/10, 115.0.0.0/8, 116.0.0.0/8, 117.0.0.0/9, 117.128.0.0/10, 118.0.0.0/11, 118.64.0.0/10, 118.128.0.0/9, 119.0.0.0/9, 119.128.0.0/10, 119.224.0.0/11, 120.0.0.0/10, 120.64.0.0/11, 120.128.0.0/11, 120.192.0.0/10,
@jason5ng32
jason5ng32 / surge.conf
Last active November 6, 2024 06:39
Surge Configs ( for 2.x )
[General]
loglevel = notify
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, ::ffff:0:0:0:0/1, ::ffff:128:0:0:0/1
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
# dns-server = 119.29.29.29,223.5.5.5,114.114.115.115
# external-controller-access = PASSWORD@0.0.0.0:6155
# ipv6 = true
// REMEMBER TO CHANGE THE external-controller-access' PASSWORD
@soffchen
soffchen / Surge.md
Last active August 10, 2023 13:56
Surge

Feature

  • 替代 PAC,实现根据规则区分选择代理线路
  • 支持 SOCKS5 和 Shadowsocks 协议
  • 完整支持所有的 Shadowsocks 加密方式 (table, rc4-md5, salsa20, chacha20, aes-256-cfb, aes-192-cfb, aes-128-cfb, bf-cfb, cast5-cfb, des-cfb, rc2-cfb, rc4, seed-cfb)
  • 全面支持双向 HTTP Keep-Alvie
  • 快,各种黑科技加速
  • 直接临时修改某个域名的访问规则 (暂时仅 Mac 版本)
  • 支持使用 GeoIP 规则决定线路

Usage

@aa65535
aa65535 / ss-install.md
Last active April 7, 2024 13:03
shadowsocks-libev install at Debian or CentOS

Debian

cd /tmp
# 编译环境准备&安装依赖包
apt-get install --no-install-recommends build-essential autoconf libtool libssl-dev libpcre3-dev asciidoc xmlto git
# 克隆源码
git clone --recursive https://github.com/shadowsocks/shadowsocks-libev.git
# 开始编译
@gkzhong
gkzhong / README
Created August 25, 2012 15:36
在Rime五筆輸入方案中添加繁體輸出
一,安裝簡體->繁體映射碼表:(該項目由opencc維護:http://code.google.com/p/opencc)
文件1:http://code.google.com/p/rimeime/source/browse/trunk/misc/opencc/data/simp_to_trad_characters.ocd
文件2:http://code.google.com/p/rimeime/source/browse/trunk/misc/opencc/data/simp_to_trad_phrases.ocd
安裝位置:共享資料目錄
如:/Library/Input Methods/Squirrel.app/Contents/SharedSupport/opencc
二,添加opencc簡繁配置文件:
詳見:zhs2zht.ini
安裝位置:共享資料目錄
如:/Library/Input Methods/Squirrel.app/Contents/SharedSupport/opencc