gistfile1.txt

SPI stage 1 bootloader
SPI ID: c2:20:17:c2:20
header found at offset 0x2000
Image 1.2: address: 0xffffffffc0000000, header length: 192, data length: 363424
Validating data...
Starting next bootloader at 0xffffffff81000000
Board type: UBNT_E300

U-Boot 2013.07 (Build time: Jan 04 2018 - 17:14:08)

Octeon unique ID: 08c000318819f31e0548
N0.LMC0 Configuration Completed: 1024 MB
Warning: Board descriptor tuple not found in eeprom, using defaults
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Start hw_watchdog_start!
Stop hw_watchdog_start!
Base DRAM address used by u-boot: 0x4fc00000, size: 0x400000
DRAM: 1 GiB
Clearing DRAM...... done

SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
Found valid SPI bootloader at offset: 0x5c000, size: 1438728 bytes
Found valid SPI bootloader at offset: 0x200000, size: 1438728 bytes
Loading bootloader from SPI offset 0x200000, size: 1438728 bytes


U-Boot 2013.07 (UBNT Build Version: e300_003_6be37) (Jun 05 2019 - 08:57:57)

Octeon unique ID: 08c000318819f31e0548
Using DRAM size from environment: 1024 MBytes
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Base DRAM address used by u-boot: 0x4f000000, size: 0x1000000
DRAM: 1 GiB
Clearing DRAM...... done
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB



UBNT_E300 r1:0, r2:14, serial #: FCECDA03BF17
MPR 13-02427-14
Loading bootloader from SPI offset 0x200000, size: 1438728 bytes


U-Boot 2013.07 (UBNT Build Version: e300_003_6be37) (Jun 05 2019 - 08:57:57)

Octeon unique ID: 08c000318819f31e0548
Using DRAM size from environment: 1024 MBytes
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Base DRAM address used by u-boot: 0x4f000000, size: 0x1000000
DRAM: 1 GiB
Clearing DRAM...... done
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB



UBNT_E300 r1:0, r2:14, serial #: FCECDA03BF17
MPR 13-02427-14
Flash boot bus region not enabled, skipping NOR flash config
DLM0: QSGMII ports selected
DLM1: mini-PCIe slots selected
DLM2: mini-PCIe slots selected
SPI: SPI NOR enabled
MMC:   Octeon MMC/SD0: 0
PCIe: Link timeout on port 0, probably the slot is empty
PCIe: Port 1 not in PCIe mode, skipping
PCIe: Port 2 not in PCIe mode, skipping
PCI console init succeeded, 1 consoles, 1024 bytes each
Net:   octeth0, octeth1 [PRIME], octeth2, octeth3
Node 0 Interface 0 has 4 ports (QSGMII)
Node 0 Interface 1 has 4 ports (QSGMII)
Node 0 Interface 2 has 4 ports (NPI)
Node 0 Interface 3 has 4 ports (LOOP)
Node 0 Interface 4 has 1 ports (AGL)
Type the command 'usb start' to scan for USB storage devices.

Hit any key to stop autoboot:  0 
reading vmlinux.64
8812552 bytes read in 2288 ms (3.7 MiB/s)
reading vmlinux.64.md5
33 bytes read in 303 ms (0 Bytes/s)
Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x19b97e0
## Loading big-endian Linux kernel with entry point: 0xffffffff8173b820 ...
Bootloader: Done loading app on coremask:
 0xf
Starting cores:
 0xf
[    0.000000] Linux version 5.4.72 (vagrant@builder) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14741-6ccb91f578)) #0 SMP Tue Oct 27 04:32:54 2020
[    0.000000] Skipping L2 locking due to reduced L2 cache size
[    0.000000] CVMSEG size: 0 cache lines (0 bytes)
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d9602 (Cavium Octeon III)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Kernel sections are not in the memory maps
[    0.000000] Wasting 278528 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using appended Device Tree.
[    0.000000] software IO TLB: mapped [mem 0x02b0e000-0x02b4e000] (0MB)
[    0.000000] Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes.
[    0.000000] Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000001100000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000001100000-0x0000000002ab9fff]
[    0.000000]   node   0: [mem 0x0000000002b00000-0x000000000fafffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x000000004ebfffff]
[    0.000000] Zeroed struct page in unavailable ranges: 10822 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000001100000-0x000000004ebfffff]
[    0.000000] percpu: Embedded 18 pages/cpu s35872 r8192 d29664 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 247395
[    0.000000] Kernel command line:  root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait console=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 960400K/1005288K available (6409K kernel code, 354K rwdata, 1556K rodata, 1332K init, 16677K bss, 44888K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 127
[    0.000000] CIB interrupt controller probed: 800107000000e000 23
[    0.000000] CIB interrupt controller probed: 800107000000e200 12
[    0.000000] CIB interrupt controller probed: 800107000000e400 6
[    0.000000] CIB interrupt controller probed: 800107000000e600 4
[    0.000000] CIB interrupt controller probed: 800107000000e800 11
[    0.000000] CIB interrupt controller probed: 800107000000e900 11
[    0.000000] CIB interrupt controller probed: 800107000000ec00 15
[    0.000000] random: get_random_bytes called from start_kernel+0x320/0x578 with crng_init=0
[    0.337315] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.356461] Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=4000000)
[    0.364692] pid_max: default: 32768 minimum: 301
[    0.369387] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.376657] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.385064] Checking for the daddi bug... no.
[    0.389817] rcu: Hierarchical SRCU implementation.
[    0.394706] smp: Bringing up secondary CPUs ...
[    0.399351] SMP: Booting CPU01 (CoreId  1)...
[    0.403632] CPU1 revision is: 000d9602 (Cavium Octeon III)
[    0.403997] SMP: Booting CPU02 (CoreId  2)...
[    0.413705] CPU2 revision is: 000d9602 (Cavium Octeon III)
[    0.414044] SMP: Booting CPU03 (CoreId  3)...
[    0.423751] CPU3 revision is: 000d9602 (Cavium Octeon III)
[    0.423853] smp: Brought up 1 node, 4 CPUs
[    0.436060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.445669] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
[    0.453085] NET: Registered protocol family 16
[    0.462654] PCIe: Initializing port 0
[    0.469497] PCIe: BIST2 FAILED for port 0 (0x0000000000000003)
[    0.663894] random: fast init done
[    2.475189] PCIe: Link timeout on port 0, probably the slot is empty
[    2.481535] PCIe: Initializing port 1
[    2.488513] PCIe: BIST FAILED for port 1 (0xffffffffffffffff)
[    4.501460] PCIe: Link timeout on port 1, probably the slot is empty
[    4.514267] SCSI subsystem initialized
[    4.518073] usbcore: registered new interface driver usbfs
[    4.523450] usbcore: registered new interface driver hub
[    4.528741] usbcore: registered new device driver usb
[    4.533729] EDAC MC: Ver: 3.0.0
[    4.537212] PCI host bridge to bus 0000:00
[    4.541176] pci_bus 0000:00: root bus resource [mem 0x1000000000000]
[    4.547483] pci_bus 0000:00: root bus resource [io  0x0000]
[    4.553036] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    4.559807] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    4.568630] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    4.575137] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    4.585460] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[    4.592004] NET: Registered protocol family 2
[    4.596644] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    4.604867] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    4.612634] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    4.619876] TCP: Hash tables configured (established 8192 bind 8192)
[    4.626182] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    4.632733] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    4.639909] NET: Registered protocol family 1
[    4.644127] PCI: CLS 0 bytes, default 128
[    4.648731] platform 1180068000000.uctl: clocks initialized.
[    4.654914] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    4.666869] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.672695] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    4.684289] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[    4.691830] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    4.698520] printk: console [ttyS0] disabled
[    4.702676] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 45, base_baud = 25000000) is a OCTEON
[    4.712452] printk: console [ttyS0] enabled
[    4.712452] printk: console [ttyS0] enabled
[    4.720777] printk: bootconsole [early0] disabled
[    4.720777] printk: bootconsole [early0] disabled
[    4.730421] octeon_rng octeon_rng: Octeon Random Number Generator
[    4.740222] loop: module loaded
[    4.744251] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[    4.749268] 3 fixed-partitions partitions found on MTD device spi0.0
[    4.755626] Creating 3 MTD partitions on "spi0.0":
[    4.760423] 0x000000000000-0x000000300000 : "boot0"
[    4.765951] 0x000000300000-0x000000400000 : "dummy"
[    4.771421] 0x000000400000-0x000000410000 : "eeprom"
[    4.777007] spi-octeon 1070000001000.spi: OCTEON SPI bus driver
[    4.783184] libphy: mdio_octeon: probed
[    4.788141] mdio_octeon 1180000001800.mdio: Probed
[    4.793236] libphy: Fixed MDIO Bus: probed
[    4.798108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.804657] ehci-pci: EHCI PCI platform driver
[    4.809149] ehci-platform: EHCI generic platform driver
[    4.814457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.820654] ohci-platform: OHCI generic platform driver
[    4.825997] usbcore: registered new interface driver usb-storage
[    4.832287] i2c-octeon 1180000001000.i2c: probed
[    4.837001] octeon_wdt: Initial granularity 5 Sec
[    4.842103] EDAC DEVICE0: Giving out device to module octeon-cpu controller cache: DEV octeon_pc_edac (INTERRUPT)
[    4.852497] EDAC DEVICE1: Giving out device to module octeon-l2c controller octeon_l2c_err: DEV octeon_l2c_edac (POLLED)
[    4.863443] octeon_lmc_edac octeon_lmc_edac.0: Disabled (ECC not enabled)
[    4.895093] Interface 0 has 4 ports (SGMII)
[    4.899354] Interface 1 has 4 ports (SGMII)
[    4.904375] Interface 3 has 4 ports (LOOP)
[    4.909692] octeon_ethernet 11800a0000000.pip eth3 (uninitialized): renamed from eth0
[    4.917540] ------------[ cut here ]------------
[    4.922172] WARNING: CPU: 3 PID: 1 at lib/kobject.c:654 kobject_get+0x68/0x70
[    4.929312] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[    4.938793] Modules linked in:
[    4.941856] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.72 #0
[    4.947774] Stack : ffffffff81a80000 0000000014109ce0 a029322d731a6e63 a029322d731a6e63
[    4.955780]         0000000000000000 800000004d47f7e0 ffffffff82ac0000 0000000000000003
[    4.963785]         000000000000008d 800000004d719e18 6d6d3a2073776170 7065722f30204e6f
[    4.971790]         0000000000000000 ffffffffffffffff 0000000000000010 0000000000000000
[    4.979794]         0000000000000000 0000000000000000 ffffffff81920000 ffffffff81727cf0
[    4.987799]         0000000000000009 ffffffff82ab33f0 ffffffff81910000 800000004d6af400
[    4.995804]         0000000000000004 ffffffff814a8350 0000000000000018 ffffffff81a70018
[    5.003809]         800000004d47c000 800000004d47f7e0 0000000000000000 ffffffff81723a6c
[    5.011814]         0000000000000000 ffffffff8172397c 000000000000008c ffffffff817fcc40
[    5.019818]         0000000000000003 ffffffff8111bdc0 0000000000000000 0000000000000000
[    5.027823]         ...
[    5.030269] Call Trace:
[    5.032724] [<ffffffff8111bdc0>] show_stack+0x30/0x100
[    5.037865] [<ffffffff81723a6c>] dump_stack+0x9c/0xd0
[    5.042920] [<ffffffff81136110>] __warn+0xc0/0x10c
[    5.047711] [<ffffffff811361f8>] warn_slowpath_fmt+0x9c/0xbc
[    5.053372] [<ffffffff81727cf0>] kobject_get+0x68/0x70
[    5.058512] [<ffffffff814afee4>] device_rename+0x2c/0x118
[    5.063916] [<ffffffff815d45f8>] dev_change_name+0x148/0x358
[    5.069579] [<ffffffff81598c64>] cvm_oct_common_init+0x11c/0x1a0
[    5.075586] [<ffffffff8159c148>] cvm_oct_sgmii_init+0x10/0x20
[    5.081333] [<ffffffff815d6e40>] register_netdevice+0x80/0x508
[    5.087168] [<ffffffff815d72ec>] register_netdev+0x24/0x48
[    5.092654] [<ffffffff815992d8>] cvm_oct_probe+0x5b8/0xa18
[    5.098144] [<ffffffff814b79c0>] platform_drv_probe+0x28/0x88
[    5.103892] [<ffffffff814b5b60>] really_probe+0xf8/0x350
[    5.109205] [<ffffffff814b60f8>] device_driver_attach+0x70/0x98
[    5.115125] [<ffffffff814b6180>] __driver_attach+0x60/0x110
[    5.120698] [<ffffffff814b3ab8>] bus_for_each_dev+0x68/0xa8
[    5.126271] [<ffffffff814b4ee0>] bus_add_driver+0x1f8/0x208
[    5.131844] [<ffffffff814b685c>] driver_register+0x84/0x150
[    5.137417] [<ffffffff811009f8>] do_one_initcall+0x78/0x1b0
[    5.142993] [<ffffffff81923e7c>] kernel_init_freeable+0x1f0/0x2d4
[    5.149091] [<ffffffff8173bb28>] kernel_init+0x14/0xfc
[    5.154231] [<ffffffff811175d0>] ret_from_kernel_thread+0x14/0x1c
[    5.160338] ---[ end trace 1d1706781a410d58 ]---
[    5.164956] ------------[ cut here ]------------
[    5.169587] WARNING: CPU: 3 PID: 1 at lib/kobject.c:755 kobject_put+0x68/0x150
[    5.176812] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_put() is being called.
[    5.186292] Modules linked in:
[    5.189349] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W         5.4.72 #0
[    5.196654] Stack : ffffffff81a80000 0000000014109ce0 a029322d731a6e63 a029322d731a6e63
[    5.204660]         0000000000000000 800000004d47f7b0 ffffffff82ac0000 0000000000000003
[    5.212664]         00000000000000b6 800000004d719e18 5720202020202020 2020352e342e3732
[    5.220669]         0000000000000000 ffffffffffffffff 0000000000000010 0000000000000000
[    5.228674]         0000000000000000 0000000000000000 ffffffff81920000 ffffffff81727d60
[    5.236679]         0000000000000009 ffffffff82ab33f0 ffffffff81910000 800000004d6af400
[    5.244684]         0000000000000004 ffffffff814a8350 0000000000000018 ffffffff81a70018
[    5.252688]         800000004d47c000 800000004d47f7b0 0000000000000000 ffffffff81723a6c
[    5.260693]         0000000000000000 ffffffff8172397c 00000000000000b5 ffffffff817fcc40
[    5.268698]         0000000000000003 ffffffff8111bdc0 0000000000000000 0000000000000000
[    5.276702]         ...
[    5.279148] Call Trace:
[    5.281597] [<ffffffff8111bdc0>] show_stack+0x30/0x100
[    5.286736] [<ffffffff81723a6c>] dump_stack+0x9c/0xd0
[    5.291789] [<ffffffff81136110>] __warn+0xc0/0x10c
[    5.296580] [<ffffffff811361f8>] warn_slowpath_fmt+0x9c/0xbc
[    5.302240] [<ffffffff81727d60>] kobject_put+0x68/0x150
[    5.307465] [<ffffffff814aff5c>] device_rename+0xa4/0x118
[    5.312867] [<ffffffff815d45f8>] dev_change_name+0x148/0x358
[    5.318527] [<ffffffff81598c64>] cvm_oct_common_init+0x11c/0x1a0
[    5.324534] [<ffffffff8159c148>] cvm_oct_sgmii_init+0x10/0x20
[    5.330281] [<ffffffff815d6e40>] register_netdevice+0x80/0x508
[    5.336115] [<ffffffff815d72ec>] register_netdev+0x24/0x48
[    5.341601] [<ffffffff815992d8>] cvm_oct_probe+0x5b8/0xa18
[    5.347088] [<ffffffff814b79c0>] platform_drv_probe+0x28/0x88
[    5.352835] [<ffffffff814b5b60>] really_probe+0xf8/0x350
[    5.358147] [<ffffffff814b60f8>] device_driver_attach+0x70/0x98
[    5.364068] [<ffffffff814b6180>] __driver_attach+0x60/0x110
[    5.369641] [<ffffffff814b3ab8>] bus_for_each_dev+0x68/0xa8
[    5.375214] [<ffffffff814b4ee0>] bus_add_driver+0x1f8/0x208
[    5.380787] [<ffffffff814b685c>] driver_register+0x84/0x150
[    5.386359] [<ffffffff811009f8>] do_one_initcall+0x78/0x1b0
[    5.391933] [<ffffffff81923e7c>] kernel_init_freeable+0x1f0/0x2d4
[    5.398027] [<ffffffff8173bb28>] kernel_init+0x14/0xfc
[    5.403167] [<ffffffff811175d0>] ret_from_kernel_thread+0x14/0x1c
[    5.409269] ---[ end trace 1d1706781a410d59 ]---
[    5.419843] NET: Registered protocol family 10
[    5.426179] Segment Routing with IPv6
[    5.429945] NET: Registered protocol family 17
[    5.434438] 8021q: 802.1Q VLAN Support v1.8
[    5.439252] libphy: SFP I2C Bus: probed
[    5.443272] sfp sfp: Host maximum power 1.0W
[    5.447564] sfp sfp: No tx_disable pin: SFP modules will always be emitting.
[    5.454800] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[    5.461651] Waiting for root device /dev/mmcblk0p2...
[    5.788946] sfp sfp: module 10Gtek           ASF-GE-T         rev V01  sn WTGETI20389      dc 180201  
[    8.821468] random: crng init done
[   14.321023] mmc0: new DDR MMC card at address 0001
[   14.326245] mmcblk0: mmc0:0001 SEM04G 3.69 GiB 
[   14.330943] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
[   14.337013] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
[   14.343024] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 2.00 MiB, chardev (252:0)
[   14.351164]  mmcblk0: p1 p2
[   14.364907] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[   14.372594] Freeing unused kernel memory: 1332K
[   14.377146] This architecture does not have kernel memory protection.
[   14.383589] Run /sbin/init as init process
[   14.755705] init: Console is alive
[   14.759272] init: - watchdog -
[   15.091891] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   15.123111] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   15.128646] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   15.136406] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x0000000002010010
[   15.145846] xhci-hcd xhci-hcd.0.auto: irq 44, io mem 0x1680000000000
[   15.152788] hub 1-0:1.0: USB hub found
[   15.156592] hub 1-0:1.0: 1 port detected
[   15.160782] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   15.166301] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   15.173980] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   15.180597] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   15.189078] hub 2-0:1.0: USB hub found
[   15.192900] hub 2-0:1.0: 1 port detected
[   15.198930] usbcore: registered new interface driver uas
[   15.204414] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   15.215616] init: - preinit -
[   15.830891] octeon_ethernet 11800a0000000.pip lan0: renamed from eth1
[   15.919200] octeon_ethernet 11800a0000000.pip lan1: renamed from eth2
[   16.014940] octeon_ethernet 11800a0000000.pip lan2: renamed from eth3
[   16.099269] octeon_ethernet 11800a0000000.pip lan3: renamed from eth0
[   16.265550] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   16.291034] usb-storage 2-1:1.0: USB Mass Storage device detected
[   16.297613] scsi host0: usb-storage 2-1:1.0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   17.330243] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[   17.339334] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
[   17.347743] sd 0:0:0:0: [sda] Write Protect is off
[   17.354057] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   17.367681]  sda: sda1
[   17.371848] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   20.506316] mount_root: rootdisk overlay filesystem has not been formatted yet
[   33.270226] F2FS-fs (loop0): Found nat_bits in checkpoint
[   33.327946] F2FS-fs (loop0): Mounted with checkpoint version = 470a8faf
[   33.335046] mount_root: overlay filesystem has not been fully initialized yet
[   33.342503] mount_root: switching to f2fs overlay
[   33.349341] overlayfs: "xino" feature enabled using 32 upper inode bits.
- config restore -
[   33.955212] urandom-seed: Seed file not found (/etc/urandom.seed)
[   34.027823] procd: - early -
[   34.030791] procd: - watchdog -
[   34.549549] procd: - watchdog -
[   34.552864] procd: - ubus -
[   34.606430] procd: - init -
Please press Enter to activate this console.
[   34.872800] kmodloader: loading kernel modules from /etc/modules.d/*
[   34.893300] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   34.905309] urngd: v1.0.2 started.
[   34.909073] Mirror/redirect action on
[   34.917709] u32 classifier
[   34.920423]     input device check on
[   34.924097]     Actions configured
[   34.949676] xt_time: kernel timezone is -0000
[   34.964205] PPP generic driver version 2.4.2
[   34.969364] NET: Registered protocol family 24
[   34.983114] kmodloader: done loading kernel modules from /etc/modules.d/*