gistfile1.txt

root@er4:~# dmesg
[    0.000000] Linux version 5.4.72 (vagrant@builder) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14741-6ccb91f578)) #0 SMP Fri Oct 23 16:09:26 2020
[    0.000000] CVMSEG size: 0 cache lines (0 bytes)
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d9602 (Cavium Octeon III)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Kernel sections are not in the memory maps
[    0.000000] Wasting 278528 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using appended Device Tree.
[    0.000000] software IO TLB: mapped [mem 0x02b0d000-0x02b4d000] (0MB)
[    0.000000] Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes.
[    0.000000] Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000001100000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000001100000-0x0000000002ab9fff]
[    0.000000]   node   0: [mem 0x0000000002b00000-0x000000000fafffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x000000004ebfffff]
[    0.000000] Zeroed struct page in unavailable ranges: 10822 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000001100000-0x000000004ebfffff]
[    0.000000] On node 0 totalpages: 251322
[    0.000000]   DMA32 zone: 3927 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 251322 pages, LIFO batch:63
[    0.000000] percpu: Embedded 18 pages/cpu s35872 r8192 d29664 u73728
[    0.000000] pcpu-alloc: s35872 r8192 d29664 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 247395
[    0.000000] Kernel command line:  root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait console=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 960404K/1005288K available (6407K kernel code, 357K rwdata, 1556K rodata, 1332K init, 16677K bss, 44884K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 127
[    0.000000] CIB interrupt controller probed: 800107000000e000 23
[    0.000000] CIB interrupt controller probed: 800107000000e200 12
[    0.000000] CIB interrupt controller probed: 800107000000e400 6
[    0.000000] CIB interrupt controller probed: 800107000000e600 4
[    0.000000] CIB interrupt controller probed: 800107000000e800 11
[    0.000000] CIB interrupt controller probed: 800107000000e900 11
[    0.000000] CIB interrupt controller probed: 800107000000ec00 15
[    0.000000] random: get_random_bytes called from start_kernel+0x320/0x578 with crng_init=0
[    0.331364] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.350511] Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=4000000)
[    0.358742] pid_max: default: 32768 minimum: 301
[    0.363435] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.370708] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.379113] Checking for the daddi bug... no.
[    0.383867] rcu: Hierarchical SRCU implementation.
[    0.388757] smp: Bringing up secondary CPUs ...
[    0.393402] SMP: Booting CPU01 (CoreId  1)...
[    0.397684] CPU1 revision is: 000d9602 (Cavium Octeon III)
[    0.398048] SMP: Booting CPU02 (CoreId  2)...
[    0.407758] CPU2 revision is: 000d9602 (Cavium Octeon III)
[    0.408100] SMP: Booting CPU03 (CoreId  3)...
[    0.417810] CPU3 revision is: 000d9602 (Cavium Octeon III)
[    0.417911] smp: Brought up 1 node, 4 CPUs
[    0.430003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.439611] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
[    0.447047] NET: Registered protocol family 16
[    0.456581] PCIe: Initializing port 0
[    0.463423] PCIe: BIST2 FAILED for port 0 (0x0000000000000003)
[    0.661958] random: fast init done
[    2.469106] PCIe: Link timeout on port 0, probably the slot is empty
[    2.475452] PCIe: Initializing port 1
[    2.482422] PCIe: BIST FAILED for port 1 (0xffffffffffffffff)
[    4.495373] PCIe: Link timeout on port 1, probably the slot is empty
[    4.508139] SCSI subsystem initialized
[    4.511963] usbcore: registered new interface driver usbfs
[    4.517342] usbcore: registered new interface driver hub
[    4.522628] usbcore: registered new device driver usb
[    4.527616] EDAC MC: Ver: 3.0.0
[    4.531158] PCI host bridge to bus 0000:00
[    4.535148] pci_bus 0000:00: root bus resource [mem 0x1000000000000]
[    4.541430] pci_bus 0000:00: root bus resource [io  0x0000]
[    4.546984] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    4.553758] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    4.562402] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    4.568918] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    4.579290] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[    4.585847] NET: Registered protocol family 2
[    4.590470] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    4.598698] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    4.606460] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    4.613698] TCP: Hash tables configured (established 8192 bind 8192)
[    4.620012] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    4.626552] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    4.633738] NET: Registered protocol family 1
[    4.637964] PCI: CLS 0 bytes, default 128
[    4.642585] platform 1180068000000.uctl: clocks initialized.
[    4.648632] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    4.660558] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.666365] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    4.677917] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[    4.685457] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    4.692083] printk: console [ttyS0] disabled
[    4.696238] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 45, base_baud = 25000000) is a OCTEON
[    4.706018] printk: console [ttyS0] enabled
[    4.714341] printk: bootconsole [early0] disabled
[    4.723985] octeon_rng octeon_rng: Octeon Random Number Generator
[    4.733731] loop: module loaded
[    4.737770] spi-nor spi0.0: mx25l6405d (8192 Kbytes)
[    4.742793] 3 fixed-partitions partitions found on MTD device spi0.0
[    4.749150] Creating 3 MTD partitions on "spi0.0":
[    4.753947] 0x000000000000-0x000000300000 : "boot0"
[    4.759516] 0x000000300000-0x000000400000 : "dummy"
[    4.764977] 0x000000400000-0x000000410000 : "eeprom"
[    4.770568] spi-octeon 1070000001000.spi: OCTEON SPI bus driver
[    4.776744] libphy: mdio_octeon: probed
[    4.781615] mdio_octeon 1180000001800.mdio: Probed
[    4.786720] libphy: Fixed MDIO Bus: probed
[    4.791639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.798185] ehci-pci: EHCI PCI platform driver
[    4.802675] ehci-platform: EHCI generic platform driver
[    4.807984] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.814183] ohci-platform: OHCI generic platform driver
[    4.819526] usbcore: registered new interface driver usb-storage
[    4.825819] i2c-octeon 1180000001000.i2c: probed
[    4.830540] octeon_wdt: Initial granularity 5 Sec
[    4.835656] EDAC DEVICE0: Giving out device to module octeon-cpu controller cache: DEV octeon_pc_edac (INTERRUPT)
[    4.846059] EDAC DEVICE1: Giving out device to module octeon-l2c controller octeon_l2c_err: DEV octeon_l2c_edac (POLLED)
[    4.857011] octeon_lmc_edac octeon_lmc_edac.0: Disabled (ECC not enabled)
[    4.888916] Interface 0 has 4 ports (SGMII)
[    4.893174] Interface 1 has 4 ports (SGMII)
[    4.898194] Interface 3 has 4 ports (LOOP)
[    4.909320] NET: Registered protocol family 10
[    4.915645] Segment Routing with IPv6
[    4.919407] NET: Registered protocol family 17
[    4.923900] 8021q: 802.1Q VLAN Support v1.8
[    4.928579] libphy: SFP I2C Bus: probed
[    4.932525] sfp sfp: Host maximum power 1.0W
[    4.936814] sfp sfp: No tx_disable pin: SFP modules will always be emitting.
[    4.944036] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[    4.950884] Waiting for root device /dev/mmcblk0p2...
[    5.250783] sfp sfp: module OEM              GLC-SX-MMD      rev ?e   sn CSGSXJ10650      dc 190108  
[    8.775290] random: crng init done
[   14.314853] mmc0: new DDR MMC card at address 0001
[   14.320076] mmcblk0: mmc0:0001 SEM04G 3.69 GiB 
[   14.324771] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
[   14.330840] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
[   14.336852] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 2.00 MiB, chardev (252:0)
[   14.344994]  mmcblk0: p1 p2
[   14.358828] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[   14.366534] Freeing unused kernel memory: 1332K
[   14.371093] This architecture does not have kernel memory protection.
[   14.377537] Run /sbin/init as init process
[   14.762676] init: Console is alive
[   14.766253] init: - watchdog -
[   15.105495] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   15.136583] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   15.142145] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   15.149906] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f06d hci version 0x100 quirks 0x0000000002010010
[   15.159347] xhci-hcd xhci-hcd.0.auto: irq 44, io mem 0x1680000000000
[   15.166295] hub 1-0:1.0: USB hub found
[   15.170103] hub 1-0:1.0: 1 port detected
[   15.174291] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   15.179808] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   15.187486] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   15.194104] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   15.202584] hub 2-0:1.0: USB hub found
[   15.206406] hub 2-0:1.0: 1 port detected
[   15.212455] usbcore: registered new interface driver uas
[   15.217945] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   15.232735] init: - preinit -
[   15.519293] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   15.676741] usb-storage 1-1:1.0: USB Mass Storage device detected
[   15.683094] scsi host0: usb-storage 1-1:1.0
[   15.863772] octeon_ethernet 11800a0000000.pip lan0: renamed from eth1
[   15.949727] octeon_ethernet 11800a0000000.pip lan1: renamed from eth2
[   16.041355] octeon_ethernet 11800a0000000.pip lan2: renamed from eth3
[   16.129275] octeon_ethernet 11800a0000000.pip lan3: renamed from eth0
[   16.700055] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[   16.709124] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
[   16.717528] sd 0:0:0:0: [sda] Write Protect is off
[   16.722341] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   16.722661] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   16.738585]  sda: sda1
[   16.742712] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   20.544142] mount_root: rootdisk overlay filesystem has not been formatted yet
[   33.286912] F2FS-fs (loop0): Found nat_bits in checkpoint
[   33.344752] F2FS-fs (loop0): Mounted with checkpoint version = 470a8faf
[   33.351838] mount_root: overlay filesystem has not been fully initialized yet
[   33.359319] mount_root: switching to f2fs overlay
[   33.366158] overlayfs: "xino" feature enabled using 32 upper inode bits.
[   34.077790] urandom-seed: Seed file not found (/etc/urandom.seed)
[   34.150434] procd: - early -
[   34.153421] procd: - watchdog -
[   34.673273] procd: - watchdog -
[   34.676625] procd: - ubus -
[   34.730245] procd: - init -
[   34.997359] kmodloader: loading kernel modules from /etc/modules.d/*
[   35.017644] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   35.032397] Mirror/redirect action on
[   35.033182] urngd: v1.0.2 started.
[   35.040167] u32 classifier
[   35.042880]     input device check on
[   35.046557]     Actions configured
[   35.069174] xt_time: kernel timezone is -0000
[   35.082970] PPP generic driver version 2.4.2
[   35.088023] NET: Registered protocol family 24
[   35.101705] kmodloader: done loading kernel modules from /etc/modules.d/*
[   38.916809] lan3: 1000 Mbps Full duplex, port 0, queue 0
[   38.922939] IPv6: ADDRCONF(NETDEV_CHANGE): lan3: link becomes ready
[   38.955677] lan0: 1000 Mbps Full duplex, port 1, queue 1
[   38.961554] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready