danapplegate/Vagrantfile.rb

## vagrant-up-output.txt
Bringing machine 'web' up with 'virtualbox' provider...
==> web: Importing base box 'my_company'...

[KProgress: 10%
[KProgress: 40%
[KProgress: 50%
[KProgress: 60%
[KProgress: 70%
[KProgress: 80%
[KProgress: 90%
[K==> web: Matching MAC address for NAT networking...
==> web: Setting the name of the VM: my_company_web_1442268172462_50018
==> web: Clearing any previously set network interfaces...
==> web: Preparing network interfaces based on configuration...
    web: Adapter 1: nat
    web: Adapter 2: hostonly
==> web: Forwarding ports...
    web: 3306 => 3306 (adapter 1)
    web: 22 => 2222 (adapter 1)
==> web: Booting VM...
==> web: Waiting for machine to boot. This may take a few minutes...
    web: SSH address: 127.0.0.1:2222
    web: SSH username: vagrant
    web: SSH auth method: private key
    web: Warning: Connection timeout. Retrying...
    web:
    web: Vagrant insecure key detected. Vagrant will automatically replace
    web: this with a newly generated keypair for better security.
    web:
    web: Inserting generated public key within guest...
    web: Removing insecure key from the guest if it's present...
    web: Key inserted! Disconnecting and reconnecting using new SSH key...
==> web: Machine booted and ready!
==> web: Checking for guest additions in VM...
    web: The guest additions on this VM do not match the installed version of
    web: VirtualBox! In most cases this is fine, but in rare cases it can
    web: prevent things such as shared folders from working properly. If you see
    web: shared folder errors, please make sure the guest additions within the
    web: virtual machine match the version of VirtualBox you have installed on
    web: your host and reload your VM.
    web:
    web: Guest Additions Version: 4.2.0
    web: VirtualBox Version: 4.3
==> web: Configuring and enabling network interfaces...
==> web: Exporting NFS shared folders...
==> web: Preparing to edit /etc/exports. Administrator privileges will be required...
==> web: Mounting NFS shared folders...
==> web: Mounting shared folders...
    web: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks => /Users/applegatedt/workspace/my_company/htdocs/protected/config/cookbooks
==> web: Running provisioner: chef_solo...
    web: Installing Chef (11.10)...
Generating chef JSON and uploading...
==> web: Running chef-solo...
==> web: stdin: is not a tty
==> web: [2015-09-14T22:05:00+00:00] INFO: Forking chef instance to converge...
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Fork successful. Waiting for new chef pid: 1761
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Forked instance now converging
==> web: Starting Chef Client, version 11.10.4
==> web: [2015-09-14T22:05:00+00:00] INFO: *** Chef 11.10.4 ***
==> web: [2015-09-14T22:05:00+00:00] INFO: Chef-client pid: 1761
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Building node object for precise64
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Extracting run list from JSON attributes provided on command line
==> web: [2015-09-14T22:05:00+00:00] INFO: Setting the run_list to ["recipe[php]", "recipe[composer]", "recipe[my_company::php]", "recipe[my_company::php-fpm]", "recipe[curl]", "recipe[nginx]", "recipe[my_company::data_cleanup]", "recipe[mysql::client]", "recipe[mysql::server]", "recipe[my_company::resque_setup]", "recipe[java]", "recipe[nodejs]", "recipe[my_company::composer-self-update]", "recipe[my_company::local]", "recipe[my_company::xdebug]", "recipe[my_company::ffmpeg_install]", "recipe[memcached]", "recipe[redisio::install]", "recipe[redisio::enable]", "recipe[my_company::ffmpeg_install]"] from JSON
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Applying attributes from json file
==> web: [2015-09-14T22:05:00+00:00] DEBUG: Platform is ubuntu version 12.04
==> web: [2015-09-14T22:05:00+00:00] INFO: Run List is [recipe[php], recipe[composer], recipe[my_company::php], recipe[my_company::php-fpm], recipe[curl], recipe[nginx], recipe[my_company::data_cleanup], recipe[mysql::client], recipe[mysql::server], recipe[my_company::resque_setup], recipe[java], recipe[nodejs], recipe[my_company::composer-self-update], recipe[my_company::local], recipe[my_company::xdebug], recipe[my_company::ffmpeg_install], recipe[memcached], recipe[redisio::install], recipe[redisio::enable]]
==> web: [2015-09-14T22:05:00+00:00] INFO: Run List expands to [php, composer, my_company::php, my_company::php-fpm, curl, nginx, my_company::data_cleanup, mysql::client, mysql::server, my_company::resque_setup, java, nodejs, my_company::composer-self-update, my_company::local, my_company::xdebug, my_company::ffmpeg_install, memcached, redisio::install, redisio::enable]
==> web: [2015-09-14T22:05:00+00:00] INFO: Starting Chef Run for precise64
==> web: [2015-09-14T22:05:00+00:00] INFO: Running start handlers
==> web: [2015-09-14T22:05:00+00:00] INFO: Start handlers complete.
==> web: [2015-09-14T22:05:00+00:00] DEBUG: No chefignore file found at /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chefignore no files will be ignored
==> web: [2015-09-14T22:05:01+00:00] WARN: found a directory test in the cookbook path, but it contains no cookbook files. skipping.
==> web: Compiling Cookbooks...
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Cookbooks to compile: [:"build-essential", :yum, :"yum-mysql-community", :mysql, :xml, :php, :composer, :cron, :logrotate, :apt, :dmg, :chef_handler, :windows, :"yum-epel", :git, :ohai, :rbenv, :my_company, :curl, :rsyslog, :bluepill, :runit, :nginx, :java, :nodejs, :memcached, :ulimit, :redisio]
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook build-essential's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook build-essential's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/libraries/timing.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook build-essential's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/libraries/xcode_command_line_tools.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook yum's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/helpers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_debian.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_fedora.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_freebsd.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_omnios.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_rhel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_smartos.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_suse.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_ubuntu.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_debian.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_fedora.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_freebsd.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_omnios.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_rhel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_smartos.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_suse.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/resource_mysql_client.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook mysql's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/resource_mysql_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook composer's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/libraries/composer.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook cron's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook logrotate's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/logrotate/libraries/logrotate_config.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/libraries/helpers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/libraries/network.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook dmg's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook chef_handler's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/libraries/helpers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook chef_handler's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/feature_base.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/powershell_helper.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/powershell_out.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/registry_helper.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/version.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/windows_architecture_helper.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/windows_helper.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/windows_package.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/windows_privileged.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/libraries/wmi_helper.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/helpers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client_osx.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client_package.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client_source.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client_windows.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_service_xinetd.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/resource_git_client.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/resource_git_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook git's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/z_provider_mapping.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_rbenv.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_ruby_build.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/provider_rbenv_rubygems.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/recipe_ext.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook rbenv's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/resource_ext.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook runit's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/runit/libraries/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook runit's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/runit/libraries/provider_runit_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook runit's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/runit/libraries/resource_runit_service.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook java's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/libraries/helpers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook java's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/libraries/matchers.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook redisio's library file: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/libraries/redisio.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook build-essential's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute build-essential::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/attributes/main.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum::main
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-mysql-community's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-mysql-community/attributes/mysql-connectors-community.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-mysql-community::mysql-connectors-community
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-mysql-community's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-mysql-community/attributes/mysql55-community.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-mysql-community::mysql55-community
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-mysql-community's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-mysql-community/attributes/mysql56-community.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-mysql-community::mysql56-community
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-mysql-community's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-mysql-community/attributes/mysql57-community.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-mysql-community::mysql57-community
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook mysql's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute mysql::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook xml's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/xml/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute xml::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook php's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute php::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook composer's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute composer::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: I am not loading attribute file php::default, because I have already seen it.
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook logrotate's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/logrotate/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute logrotate::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook apt's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute apt::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook dmg's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute dmg::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook chef_handler's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute chef_handler::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook windows's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute windows::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel-debuginfo.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel-debuginfo
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel-source.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel-source
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel-testing-debuginfo.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel-testing-debuginfo
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel-testing-source.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel-testing-source
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel-testing.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel-testing
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook yum-epel's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum-epel/attributes/epel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute yum-epel::epel
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook git's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute git::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook ohai's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ohai/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute ohai::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook rbenv's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute rbenv::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook my_company's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/my_company/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute my_company::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute deploy::deploy
==> web: [2015-09-14T22:05:01+00:00] DEBUG: nil
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute my_company::php-fpm
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook my_company's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/my_company/attributes/php-fpm.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: I am not loading attribute file my_company::php-fpm, because I have already seen it.
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook my_company's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/my_company/attributes/xdebug.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute my_company::xdebug
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook rsyslog's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rsyslog/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute rsyslog::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook bluepill's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/bluepill/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute bluepill::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook runit's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/runit/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute runit::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/auth_request.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::auth_request
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/devel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::devel
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/echo.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::echo
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/geoip.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::geoip
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/headers_more.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::headers_more
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/lua.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::lua
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/naxsi.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::naxsi
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/openssl_source.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::openssl_source
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/passenger.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::passenger
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/rate_limiting.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::rate_limiting
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/repo.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::repo
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/source.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::source
==> web: [2015-09-14T22:05:01+00:00] DEBUG: I am not loading attribute file nginx::default, because I have already seen it.
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/status.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::status
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nginx's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/attributes/upload_progress.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nginx::upload_progress
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook java's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute java::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook nodejs's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nodejs/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute nodejs::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook memcached's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/memcached/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute memcached::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook ulimit's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute ulimit::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook redisio's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/attributes/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute redisio::default
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Node precise64 loading cookbook redisio's attribute file /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/attributes/redis_gem.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading Attribute redisio::redis_gem
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook yum's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/providers/globalconfig.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/providers/globalconfig.rb into a provider named yum_globalconfig defined in Chef::Provider::YumGlobalconfig
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook yum's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/providers/repository.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/providers/repository.rb into a provider named yum_repository defined in Chef::Provider::YumRepository
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook yum's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/resources/globalconfig.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/resources/globalconfig.rb into a resource named yum_globalconfig defined in Chef::Resource::YumGlobalconfig
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook yum's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/resources/repository.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/yum/resources/repository.rb into a resource named yum_repository defined in Chef::Resource::YumRepository
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook php's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/providers/pear.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/providers/pear.rb into a provider named php_pear defined in Chef::Provider::PhpPear
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook php's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/providers/pear_channel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/providers/pear_channel.rb into a provider named php_pear_channel defined in Chef::Provider::PhpPearChannel
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook php's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/resources/pear.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/resources/pear.rb into a resource named php_pear defined in Chef::Resource::PhpPear
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook php's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/resources/pear_channel.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/resources/pear_channel.rb into a resource named php_pear_channel defined in Chef::Resource::PhpPearChannel
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook composer's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/providers/project.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/providers/project.rb into a provider named composer_project defined in Chef::Provider::ComposerProject
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook composer's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/resources/project.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/resources/project.rb into a resource named composer_project defined in Chef::Resource::ComposerProject
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook cron's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/providers/d.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/providers/d.rb into a provider named cron_d defined in Chef::Provider::CronD
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook cron's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/resources/d.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/resources/d.rb into a resource named cron_d defined in Chef::Resource::CronD
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/providers/preference.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/providers/preference.rb into a provider named apt_preference defined in Chef::Provider::AptPreference
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/providers/repository.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/providers/repository.rb into a provider named apt_repository defined in Chef::Provider::AptRepository
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/resources/preference.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/resources/preference.rb into a resource named apt_preference defined in Chef::Resource::AptPreference
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook apt's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/resources/repository.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/apt/resources/repository.rb into a resource named apt_repository defined in Chef::Resource::AptRepository
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook dmg's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/providers/package.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/providers/package.rb into a provider named dmg_package defined in Chef::Provider::DmgPackage
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook dmg's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/resources/package.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/dmg/resources/package.rb into a resource named dmg_package defined in Chef::Resource::DmgPackage
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook chef_handler's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/providers/default.rb
==> web: [2015-09-14T22:05:01+00:00] INFO: ChefHandler light-weight provider already initialized -- overriding!
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/providers/default.rb into a provider named chef_handler defined in Chef::Provider::ChefHandler
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook chef_handler's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/resources/default.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/chef_handler/resources/default.rb into a resource named chef_handler defined in Chef::Resource::ChefHandler
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/auto_run.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/auto_run.rb into a provider named windows_auto_run defined in Chef::Provider::WindowsAutoRun
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/batch.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/batch.rb into a provider named windows_batch defined in Chef::Provider::WindowsBatch
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/certificate.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/certificate.rb into a provider named windows_certificate defined in Chef::Provider::WindowsCertificate
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/certificate_binding.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/certificate_binding.rb into a provider named windows_certificate_binding defined in Chef::Provider::WindowsCertificateBinding
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_dism.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_dism.rb into a provider named windows_feature_dism defined in Chef::Provider::WindowsFeatureDism
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_powershell.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_powershell.rb into a provider named windows_feature_powershell defined in Chef::Provider::WindowsFeaturePowershell
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_servermanagercmd.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/feature_servermanagercmd.rb into a provider named windows_feature_servermanagercmd defined in Chef::Provider::WindowsFeatureServermanagercmd
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/font.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/font.rb into a provider named windows_font defined in Chef::Provider::WindowsFont
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/http_acl.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/http_acl.rb into a provider named windows_http_acl defined in Chef::Provider::WindowsHttpAcl
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/pagefile.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/pagefile.rb into a provider named windows_pagefile defined in Chef::Provider::WindowsPagefile
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/path.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/path.rb into a provider named windows_path defined in Chef::Provider::WindowsPath
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/printer.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/printer.rb into a provider named windows_printer defined in Chef::Provider::WindowsPrinter
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/printer_port.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/printer_port.rb into a provider named windows_printer_port defined in Chef::Provider::WindowsPrinterPort
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/reboot.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/reboot.rb into a provider named windows_reboot defined in Chef::Provider::WindowsReboot
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/registry.rb
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/registry.rb into a provider named windows_registry defined in Chef::Provider::WindowsRegistry
==> web: [2015-09-14T22:05:01+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/shortcut.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/shortcut.rb into a provider named windows_shortcut defined in Chef::Provider::WindowsShortcut
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/task.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/task.rb into a provider named windows_task defined in Chef::Provider::WindowsTask
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/zipfile.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/providers/zipfile.rb into a provider named windows_zipfile defined in Chef::Provider::WindowsZipfile
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/auto_run.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/auto_run.rb into a resource named windows_auto_run defined in Chef::Resource::WindowsAutoRun
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/batch.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/batch.rb into a resource named windows_batch defined in Chef::Resource::WindowsBatch
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/certificate.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/certificate.rb into a resource named windows_certificate defined in Chef::Resource::WindowsCertificate
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/certificate_binding.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/certificate_binding.rb into a resource named windows_certificate_binding defined in Chef::Resource::WindowsCertificateBinding
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/feature.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/feature.rb into a resource named windows_feature defined in Chef::Resource::WindowsFeature
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/font.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/font.rb into a resource named windows_font defined in Chef::Resource::WindowsFont
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/http_acl.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/http_acl.rb into a resource named windows_http_acl defined in Chef::Resource::WindowsHttpAcl
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/pagefile.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/pagefile.rb into a resource named windows_pagefile defined in Chef::Resource::WindowsPagefile
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/path.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/path.rb into a resource named windows_path defined in Chef::Resource::WindowsPath
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/printer.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/printer.rb into a resource named windows_printer defined in Chef::Resource::WindowsPrinter
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/printer_port.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/printer_port.rb into a resource named windows_printer_port defined in Chef::Resource::WindowsPrinterPort
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/reboot.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/reboot.rb into a resource named windows_reboot defined in Chef::Resource::WindowsReboot
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/registry.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/registry.rb into a resource named windows_registry defined in Chef::Resource::WindowsRegistry
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/shortcut.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/shortcut.rb into a resource named windows_shortcut defined in Chef::Resource::WindowsShortcut
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/task.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/task.rb into a resource named windows_task defined in Chef::Resource::WindowsTask
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook windows's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/zipfile.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/windows/resources/zipfile.rb into a resource named windows_zipfile defined in Chef::Resource::WindowsZipfile
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook git's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/providers/config.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/providers/config.rb into a provider named git_config defined in Chef::Provider::GitConfig
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook git's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/resources/config.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/resources/config.rb into a resource named git_config defined in Chef::Resource::GitConfig
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook rbenv's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/providers/execute.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/providers/execute.rb into a provider named rbenv_execute defined in Chef::Provider::RbenvExecute
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook rbenv's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/providers/ruby.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/providers/ruby.rb into a provider named rbenv_ruby defined in Chef::Provider::RbenvRuby
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook rbenv's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/execute.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/execute.rb into a resource named rbenv_execute defined in Chef::Resource::RbenvExecute
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook rbenv's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/gem.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/gem.rb into a resource named rbenv_gem defined in Chef::Resource::RbenvGem
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook rbenv's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/ruby.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/resources/ruby.rb into a resource named rbenv_ruby defined in Chef::Resource::RbenvRuby
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook bluepill's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/bluepill/providers/service.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/bluepill/providers/service.rb into a provider named bluepill_service defined in Chef::Provider::BluepillService
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook bluepill's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/bluepill/resources/service.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/bluepill/resources/service.rb into a resource named bluepill_service defined in Chef::Resource::BluepillService
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook java's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/providers/alternatives.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/providers/alternatives.rb into a provider named java_alternatives defined in Chef::Provider::JavaAlternatives
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook java's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/providers/ark.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/providers/ark.rb into a provider named java_ark defined in Chef::Provider::JavaArk
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook java's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/resources/alternatives.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/resources/alternatives.rb into a resource named java_alternatives defined in Chef::Resource::JavaAlternatives
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook java's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/resources/ark.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/java/resources/ark.rb into a resource named java_ark defined in Chef::Resource::JavaArk
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook ulimit's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/providers/domain.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/providers/domain.rb into a provider named ulimit_domain defined in Chef::Provider::UlimitDomain
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook ulimit's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/providers/rule.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/providers/rule.rb into a provider named ulimit_rule defined in Chef::Provider::UlimitRule
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook ulimit's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/resources/domain.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/resources/domain.rb into a resource named ulimit_domain defined in Chef::Resource::UlimitDomain
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook ulimit's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/resources/rule.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/resources/rule.rb into a resource named ulimit_rule defined in Chef::Resource::UlimitRule
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb into a provider named redisio_install defined in Chef::Provider::RedisioInstall
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/service.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/service.rb into a provider named redisio_service defined in Chef::Provider::RedisioService
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's providers from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/uninstall.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/uninstall.rb into a provider named redisio_uninstall defined in Chef::Provider::RedisioUninstall
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/install.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/install.rb into a resource named redisio_install defined in Chef::Resource::RedisioInstall
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/service.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/service.rb into a resource named redisio_service defined in Chef::Resource::RedisioService
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook redisio's resources from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/uninstall.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loaded contents of /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/resources/uninstall.rb into a resource named redisio_uninstall defined in Chef::Resource::RedisioUninstall
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook cron's definitions from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/cron/definitions/manage.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook logrotate's definitions from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/logrotate/definitions/logrotate_app.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook nginx's definitions from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/definitions/nginx_site.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook memcached's definitions from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/memcached/definitions/memcached_instance.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading cookbook ulimit's definitions from /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/definitions/user_ulimit.rb
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe php via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook php
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe php::source via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe source in cookbook php
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe build-essential via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook build-essential
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe build-essential::_debian via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe _debian in cookbook build-essential
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe xml via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook xml
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe mysql::client via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe client in cookbook mysql
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe composer via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook composer
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe composer::install via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe install in cookbook composer
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe php::default via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading php::default, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe composer::global_configs via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe global_configs in cookbook composer
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::php via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe php in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::php-fpm via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe php-fpm in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe php via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading php, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for php_pear_channel[pecl.php.net] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous php_pear_channel[pecl.php.net]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/recipes/default.rb:29:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  php_pear_channel[pecl.php.net]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/my_company/recipes/php.rb:18:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for template[/etc/php5/cli/php.ini] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous template[/etc/php5/cli/php.ini]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/recipes/source.rb:74:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  template[/etc/php5/cli/php.ini]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/my_company/recipes/php.rb:59:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::php-fpm via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading my_company::php-fpm, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe curl via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook curl
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::package via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe package in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::ohai_plugin via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe ohai_plugin in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe ohai::default via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook ohai
==> web: [2015-09-14T22:05:02+00:00] INFO: ohai plugins will be at: /etc/chef/ohai_plugins
==> web: Recipe: ohai::default
==> web:   * remote_directory[/etc/chef/ohai_plugins] action create
==> web: [2015-09-14T22:05:02+00:00] INFO: Processing remote_directory[/etc/chef/ohai_plugins] action create (ohai::default line 33)
==> web: [2015-09-14T22:05:02+00:00] INFO: remote_directory[/etc/chef/ohai_plugins] created directory /etc/chef/ohai_plugins
==> web:
==> web:     - create new directory /etc/chef/ohai_plugins
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] INFO: remote_directory[/etc/chef/ohai_plugins] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * cookbook_file[/etc/chef/ohai_plugins/README] action create
==> web: [2015-09-14T22:05:02+00:00] INFO: Processing cookbook_file[/etc/chef/ohai_plugins/README] action create (dynamically defined)
==> web: [2015-09-14T22:05:02+00:00] DEBUG: touching /etc/chef/ohai_plugins/README to create it
==> web: [2015-09-14T22:05:02+00:00] INFO: cookbook_file[/etc/chef/ohai_plugins/README] created file /etc/chef/ohai_plugins/README
==> web:
==> web:     - create new file /etc/chef/ohai_plugins/README
==> web: [2015-09-14T22:05:02+00:00] DEBUG: cookbook_file[/etc/chef/ohai_plugins/README] staging /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ohai/files/default/plugins/README to /tmp/.README20150914-1761-fjo4qo
==> web: [2015-09-14T22:05:02+00:00] DEBUG: calculating checksum of /tmp/.README20150914-1761-fjo4qo to compare with
==> web: [2015-09-14T22:05:02+00:00] DEBUG: running: diff -u /etc/chef/ohai_plugins/README /tmp/.README20150914-1761-fjo4qo
==> web: [2015-09-14T22:05:02+00:00] DEBUG: reading modes from /etc/chef/ohai_plugins/README file
==> web: [2015-09-14T22:05:02+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/.README20150914-1761-fjo4qo
==> web: [2015-09-14T22:05:02+00:00] DEBUG: moving temporary file /tmp/.README20150914-1761-fjo4qo into place at /etc/chef/ohai_plugins/README
==> web: [2015-09-14T22:05:02+00:00] INFO: cookbook_file[/etc/chef/ohai_plugins/README] updated file contents /etc/chef/ohai_plugins/README
==> web:
==> web:     - update content in file /etc/chef/ohai_plugins/README from none to 775fa7
==> web:
==> web:         --- /etc/chef/ohai_plugins/README	2015-09-14 22:05:02.300981046 +0000
==> web:         +++ /tmp/.README20150914-1761-fjo4qo	2015-09-14 22:05:02.304981047 +0000
==> web:         @@ -1 +1,2 @@
==> web:         +This directory contains custom plugins for Ohai.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:05:02+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:05:02+00:00] INFO: cookbook_file[/etc/chef/ohai_plugins/README] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: ohai::default
==> web:   * ohai[custom_plugins] action reload
==> web: [2015-09-14T22:05:02+00:00] INFO: Processing ohai[custom_plugins] action reload (ohai::default line 46)
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:02+00:00] INFO: ohai[custom_plugins] reloaded
==> web:
==> web:     - re-run ohai and merge results into node attributes
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::commons via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe commons in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::commons_dir via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe commons_dir in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::commons_script via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe commons_script in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nginx::commons_conf via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe commons_conf in cookbook nginx
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for service[nginx] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous service[nginx]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/recipes/package.rb:43:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  service[nginx]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nginx/recipes/default.rb:24:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::data_cleanup via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe data_cleanup in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe mysql::client via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading mysql::client, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe mysql::server via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe server in cookbook mysql
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::resque_setup via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe resque_setup in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe java via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook java
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe java::set_attributes_from_version via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe set_attributes_from_version in cookbook java
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe java::openjdk via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe openjdk in cookbook java
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe java::default_java_symlink via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default_java_symlink in cookbook java
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe java::set_java_home via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe set_java_home in cookbook java
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nodejs via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook nodejs
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe apt via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook apt
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nodejs::install_from_source via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe install_from_source in cookbook nodejs
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe build-essential via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading build-essential, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[libssl-dev] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[libssl-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/recipes/source.rb:36:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[libssl-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nodejs/recipes/install_from_source.rb:27:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::composer-self-update via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe composer-self-update in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::local via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe local in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe nodejs via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading nodejs, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe rbenv::default via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook rbenv
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe apt via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading apt, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe build-essential via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading build-essential, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe git via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook git
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe git::package via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe package in cookbook git
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[curl] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[curl]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/curl/recipes/default.rb:20:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[curl]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/recipes/default.rb:33:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[libssl-dev] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[libssl-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/nodejs/recipes/install_from_source.rb:27:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[libssl-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/recipes/default.rb:60:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[libxml2-dev] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[libxml2-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/xml/recipes/default.rb:21:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[libxml2-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/recipes/default.rb:67:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[libxslt1-dev] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[libxslt1-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/xml/recipes/default.rb:21:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[libxslt1-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/recipes/default.rb:68:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[ncurses-dev] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[ncurses-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/recipes/_debian.rb:27:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[ncurses-dev]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/recipes/default.rb:71:in `from_file'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe rbenv::ruby_build via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe ruby_build in cookbook rbenv
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe git via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading git, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for ruby_block[set HOME for rbenv at 1442268302] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous ruby_block[set HOME for rbenv at 1442268302]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_rbenv.rb:125:in `with_home_for_user'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  ruby_block[set HOME for rbenv at 1442268302]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_rbenv.rb:125:in `with_home_for_user'
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for ruby_block[unset HOME for rbenv 1442268302] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous ruby_block[unset HOME for rbenv 1442268302]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_rbenv.rb:139:in `with_home_for_user'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  ruby_block[unset HOME for rbenv 1442268302]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/rbenv/libraries/chef_mixin_rbenv.rb:139:in `with_home_for_user'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe git via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading git, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::xdebug via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe xdebug in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::php-fpm via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: I am not loading my_company::php-fpm, because I have already seen it.
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe my_company::ffmpeg_install via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe ffmpeg_install in cookbook my_company
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe memcached via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook memcached
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe redisio::install via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe install in cookbook redisio
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe redisio::default via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook redisio
==> web: [2015-09-14T22:05:02+00:00] WARN: Cloning resource attributes for package[build-essential] from prior resource (CHEF-3694)
==> web: [2015-09-14T22:05:02+00:00] WARN: Previous package[build-essential]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/build-essential/recipes/_debian.rb:24:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] WARN: Current  package[build-essential]: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/recipes/default.rb:23:in `block in from_file'
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe ulimit::default via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe default in cookbook ulimit
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading Recipe redisio::enable via include_recipe
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Found recipe enable in cookbook redisio
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Loading from cookbook_path: /tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks
==> web: Converging 146 resources
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Converging node precise64
==> web: Recipe: build-essential::_debian
==> web:   * package[autoconf] action install
==> web: [2015-09-14T22:05:02+00:00] INFO: Processing package[autoconf] action install (build-essential::_debian line 21)
==> web: [2015-09-14T22:05:02+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:02+00:00] DEBUG: package[autoconf] checking package status for autoconf
==> web: [2015-09-14T22:05:03+00:00] DEBUG: package[autoconf] current version is nil
==> web: [2015-09-14T22:05:03+00:00] DEBUG: package[autoconf] candidate version is 2.68-1ubuntu2
==> web:
==> web:     - install version 2.68-1ubuntu2 of package autoconf
==> web:   * package[binutils-doc] action install
==> web: [2015-09-14T22:05:05+00:00] INFO: Processing package[binutils-doc] action install (build-essential::_debian line 22)
==> web: [2015-09-14T22:05:05+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:05+00:00] DEBUG: package[binutils-doc] checking package status for binutils-doc
==> web: [2015-09-14T22:05:05+00:00] DEBUG: package[binutils-doc] current version is nil
==> web: [2015-09-14T22:05:05+00:00] DEBUG: package[binutils-doc] candidate version is 2.22-6ubuntu1.3
==> web:
==> web:     - install version 2.22-6ubuntu1.3 of package binutils-doc
==> web:   * package[bison] action install
==> web: [2015-09-14T22:05:07+00:00] INFO: Processing package[bison] action install (build-essential::_debian line 23)
==> web: [2015-09-14T22:05:07+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:07+00:00] DEBUG: package[bison] checking package status for bison
==> web: [2015-09-14T22:05:07+00:00] DEBUG: package[bison] current version is nil
==> web: [2015-09-14T22:05:07+00:00] DEBUG: package[bison] candidate version is 1:2.5.dfsg-2.1
==> web:
==> web:     - install version 1:2.5.dfsg-2.1 of package bison
==> web:   * package[build-essential] action install
==> web: [2015-09-14T22:05:08+00:00] INFO: Processing package[build-essential] action install (build-essential::_debian line 24)
==> web: [2015-09-14T22:05:08+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:08+00:00] DEBUG: package[build-essential] checking package status for build-essential
==> web: [2015-09-14T22:05:08+00:00] DEBUG: package[build-essential] current version is nil
==> web: [2015-09-14T22:05:08+00:00] DEBUG: package[build-essential] candidate version is 11.5ubuntu2.1
==> web:
==> web:     - install version 11.5ubuntu2.1 of package build-essential
==> web:   * package[flex] action install
==> web: [2015-09-14T22:05:14+00:00] INFO: Processing package[flex] action install (build-essential::_debian line 25)
==> web: [2015-09-14T22:05:14+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:14+00:00] DEBUG: package[flex] checking package status for flex
==> web: [2015-09-14T22:05:14+00:00] DEBUG: package[flex] current version is nil
==> web: [2015-09-14T22:05:14+00:00] DEBUG: package[flex] candidate version is 2.5.35-10ubuntu3
==> web:
==> web:     - install version 2.5.35-10ubuntu3 of package flex
==> web:   * package[gettext] action install
==> web: [2015-09-14T22:05:16+00:00] INFO: Processing package[gettext] action install (build-essential::_debian line 26)
==> web: [2015-09-14T22:05:16+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:16+00:00] DEBUG: package[gettext] checking package status for gettext
==> web: [2015-09-14T22:05:16+00:00] DEBUG: package[gettext] current version is nil
==> web: [2015-09-14T22:05:16+00:00] DEBUG: package[gettext] candidate version is 0.18.1.1-5ubuntu3
==> web:
==> web:     - install version 0.18.1.1-5ubuntu3 of package gettext
==> web:   * package[ncurses-dev] action install
==> web: [2015-09-14T22:05:18+00:00] INFO: Processing package[ncurses-dev] action install (build-essential::_debian line 27)
==> web: [2015-09-14T22:05:18+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:18+00:00] DEBUG: package[ncurses-dev] checking package status for ncurses-dev
==> web: [2015-09-14T22:05:18+00:00] DEBUG: package[ncurses-dev] current version is nil
==> web: [2015-09-14T22:05:18+00:00] INFO: package[ncurses-dev] is a virtual package, actually acting on package[libncurses5-dev]
==> web: [2015-09-14T22:05:18+00:00] DEBUG: package[ncurses-dev] checking package status for libncurses5-dev
==> web: [2015-09-14T22:05:18+00:00] DEBUG: package[ncurses-dev] current version is nil
==> web: [2015-09-14T22:05:18+00:00] DEBUG: package[ncurses-dev] candidate version is 5.9-4
==> web:
==> web:     - install version 5.9-4 of package ncurses-dev
==> web: Recipe: xml::default
==> web:   * package[libxml2-dev] action install
==> web: [2015-09-14T22:05:19+00:00] INFO: Processing package[libxml2-dev] action install (xml::default line 21)
==> web: [2015-09-14T22:05:19+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:19+00:00] DEBUG: package[libxml2-dev] checking package status for libxml2-dev
==> web: [2015-09-14T22:05:19+00:00] DEBUG: package[libxml2-dev] current version is nil
==> web: [2015-09-14T22:05:19+00:00] DEBUG: package[libxml2-dev] candidate version is 2.7.8.dfsg-5.1ubuntu4.11
==> web:
==> web:     - install version 2.7.8.dfsg-5.1ubuntu4.11 of package libxml2-dev
==> web:   * package[libxslt1-dev] action install
==> web: [2015-09-14T22:05:22+00:00] INFO: Processing package[libxslt1-dev] action install (xml::default line 21)
==> web: [2015-09-14T22:05:22+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:22+00:00] DEBUG: package[libxslt1-dev] checking package status for libxslt1-dev
==> web: [2015-09-14T22:05:22+00:00] DEBUG: package[libxslt1-dev] current version is nil
==> web: [2015-09-14T22:05:22+00:00] DEBUG: package[libxslt1-dev] candidate version is 1.1.26-8ubuntu1.3
==> web:
==> web:     - install version 1.1.26-8ubuntu1.3 of package libxslt1-dev
==> web: Recipe: mysql::client
==> web:   * mysql_client[default] action create
==> web: [2015-09-14T22:05:24+00:00] INFO: Processing mysql_client[default] action create (mysql::client line 20)
==> web: [2015-09-14T22:05:24+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web:
==> web:     - ubuntu patternRecipe: <Dynamically Defined Resource>
==> web:   * package[mysql-client] action install
==> web: [2015-09-14T22:05:24+00:00] INFO: Processing package[mysql-client] action install (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_ubuntu.rb line 16)
==> web: [2015-09-14T22:05:24+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:24+00:00] DEBUG: package[mysql-client] checking package status for mysql-client
==> web: [2015-09-14T22:05:24+00:00] DEBUG: package[mysql-client] current version is nil
==> web: [2015-09-14T22:05:24+00:00] DEBUG: package[mysql-client] candidate version is 5.5.44-0ubuntu0.12.04.1
==> web:
==> web:     - install version 5.5.44-0ubuntu0.12.04.1 of package mysql-client
==> web:   * package[libmysqlclient-dev] action install
==> web: [2015-09-14T22:05:29+00:00] INFO: Processing package[libmysqlclient-dev] action install (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_client_ubuntu.rb line 16)
==> web: [2015-09-14T22:05:29+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:29+00:00] DEBUG: package[libmysqlclient-dev] checking package status for libmysqlclient-dev
==> web: [2015-09-14T22:05:29+00:00] DEBUG: package[libmysqlclient-dev] current version is nil
==> web: [2015-09-14T22:05:29+00:00] DEBUG: package[libmysqlclient-dev] candidate version is 5.5.44-0ubuntu0.12.04.1
==> web:
==> web:     - install version 5.5.44-0ubuntu0.12.04.1 of package libmysqlclient-dev
==> web: Recipe: php::source
==> web:   * package[libbz2-dev] action install
==> web: [2015-09-14T22:05:31+00:00] INFO: Processing package[libbz2-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:31+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:31+00:00] DEBUG: package[libbz2-dev] checking package status for libbz2-dev
==> web: [2015-09-14T22:05:31+00:00] DEBUG: package[libbz2-dev] current version is nil
==> web: [2015-09-14T22:05:31+00:00] DEBUG: package[libbz2-dev] candidate version is 1.0.6-1
==> web:
==> web:     - install version 1.0.6-1 of package libbz2-dev
==> web:   * package[libc-client2007e] action install
==> web: [2015-09-14T22:05:32+00:00] INFO: Processing package[libc-client2007e] action install (php::source line 36)
==> web: [2015-09-14T22:05:32+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:32+00:00] DEBUG: package[libc-client2007e] checking package status for libc-client2007e
==> web: [2015-09-14T22:05:32+00:00] DEBUG: package[libc-client2007e] current version is nil
==> web: [2015-09-14T22:05:32+00:00] DEBUG: package[libc-client2007e] candidate version is 8:2007e~dfsg-3.2ubuntu1
==> web:
==> web:     - install version 8:2007e~dfsg-3.2ubuntu1 of package libc-client2007e
==> web:   * package[libc-client2007e-dev] action install
==> web: [2015-09-14T22:05:34+00:00] INFO: Processing package[libc-client2007e-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:34+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:34+00:00] DEBUG: package[libc-client2007e-dev] checking package status for libc-client2007e-dev
==> web: [2015-09-14T22:05:34+00:00] DEBUG: package[libc-client2007e-dev] current version is nil
==> web: [2015-09-14T22:05:34+00:00] DEBUG: package[libc-client2007e-dev] candidate version is 8:2007e~dfsg-3.2ubuntu1
==> web:
==> web:     - install version 8:2007e~dfsg-3.2ubuntu1 of package libc-client2007e-dev
==> web:   * package[libcurl4-gnutls-dev] action install
==> web: [2015-09-14T22:05:38+00:00] INFO: Processing package[libcurl4-gnutls-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:38+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:38+00:00] DEBUG: package[libcurl4-gnutls-dev] checking package status for libcurl4-gnutls-dev
==> web: [2015-09-14T22:05:38+00:00] DEBUG: package[libcurl4-gnutls-dev] current version is nil
==> web: [2015-09-14T22:05:38+00:00] DEBUG: package[libcurl4-gnutls-dev] candidate version is 7.22.0-3ubuntu4.14
==> web:
==> web:     - install version 7.22.0-3ubuntu4.14 of package libcurl4-gnutls-dev
==> web:   * package[libfreetype6-dev] action install
==> web: [2015-09-14T22:05:43+00:00] INFO: Processing package[libfreetype6-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:43+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:43+00:00] DEBUG: package[libfreetype6-dev] checking package status for libfreetype6-dev
==> web: [2015-09-14T22:05:43+00:00] DEBUG: package[libfreetype6-dev] current version is nil
==> web: [2015-09-14T22:05:43+00:00] DEBUG: package[libfreetype6-dev] candidate version is 2.4.8-1ubuntu2.3
==> web:
==> web:     - install version 2.4.8-1ubuntu2.3 of package libfreetype6-dev
==> web:   * package[libgmp3-dev] action install
==> web: [2015-09-14T22:05:45+00:00] INFO: Processing package[libgmp3-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:45+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:45+00:00] DEBUG: package[libgmp3-dev] checking package status for libgmp3-dev
==> web: [2015-09-14T22:05:45+00:00] DEBUG: package[libgmp3-dev] current version is nil
==> web: [2015-09-14T22:05:45+00:00] DEBUG: package[libgmp3-dev] candidate version is 2:5.0.2+dfsg-2ubuntu1
==> web:
==> web:     - install version 2:5.0.2+dfsg-2ubuntu1 of package libgmp3-dev
==> web:   * package[libjpeg62-dev] action install
==> web: [2015-09-14T22:05:46+00:00] INFO: Processing package[libjpeg62-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:46+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:46+00:00] DEBUG: package[libjpeg62-dev] checking package status for libjpeg62-dev
==> web: [2015-09-14T22:05:46+00:00] DEBUG: package[libjpeg62-dev] current version is nil
==> web: [2015-09-14T22:05:46+00:00] DEBUG: package[libjpeg62-dev] candidate version is 6b1-2ubuntu1.1
==> web:
==> web:     - install version 6b1-2ubuntu1.1 of package libjpeg62-dev
==> web:   * package[libkrb5-dev] action install
==> web: [2015-09-14T22:05:47+00:00] INFO: Processing package[libkrb5-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:47+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libkrb5-dev] checking package status for libkrb5-dev
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libkrb5-dev] current version is 1.10+dfsg~beta1-2ubuntu0.6
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libkrb5-dev] candidate version is 1.10+dfsg~beta1-2ubuntu0.6
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libkrb5-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libmcrypt-dev] action install
==> web: [2015-09-14T22:05:47+00:00] INFO: Processing package[libmcrypt-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:47+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libmcrypt-dev] checking package status for libmcrypt-dev
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libmcrypt-dev] current version is nil
==> web: [2015-09-14T22:05:47+00:00] DEBUG: package[libmcrypt-dev] candidate version is 2.5.8-3.1
==> web:
==> web:     - install version 2.5.8-3.1 of package libmcrypt-dev
==> web:   * package[libpng12-dev] action install
==> web: [2015-09-14T22:05:49+00:00] INFO: Processing package[libpng12-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:49+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:49+00:00] DEBUG: package[libpng12-dev] checking package status for libpng12-dev
==> web: [2015-09-14T22:05:49+00:00] DEBUG: package[libpng12-dev] current version is nil
==> web: [2015-09-14T22:05:49+00:00] DEBUG: package[libpng12-dev] candidate version is 1.2.46-3ubuntu4
==> web:
==> web:     - install version 1.2.46-3ubuntu4 of package libpng12-dev
==> web:   * package[libssl-dev] action install
==> web: [2015-09-14T22:05:51+00:00] INFO: Processing package[libssl-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:51+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:51+00:00] DEBUG: package[libssl-dev] checking package status for libssl-dev
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libssl-dev] current version is 1.0.1-4ubuntu5.5
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libssl-dev] candidate version is 1.0.1-4ubuntu5.31
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libssl-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libt1-dev] action install
==> web: [2015-09-14T22:05:52+00:00] INFO: Processing package[libt1-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:52+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libt1-dev] checking package status for libt1-dev
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libt1-dev] current version is nil
==> web: [2015-09-14T22:05:52+00:00] DEBUG: package[libt1-dev] candidate version is 5.1.2-3.4ubuntu1
==> web:
==> web:     - install version 5.1.2-3.4ubuntu1 of package libt1-dev
==> web:   * package[libpq-dev] action install
==> web: [2015-09-14T22:05:58+00:00] INFO: Processing package[libpq-dev] action install (php::source line 36)
==> web: [2015-09-14T22:05:58+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:05:58+00:00] DEBUG: package[libpq-dev] checking package status for libpq-dev
==> web: [2015-09-14T22:05:58+00:00] DEBUG: package[libpq-dev] current version is nil
==> web: [2015-09-14T22:05:58+00:00] DEBUG: package[libpq-dev] candidate version is 9.1.18-0ubuntu0.12.04
==> web:
==> web:     - install version 9.1.18-0ubuntu0.12.04 of package libpq-dev
==> web:   * remote_file[/var/chef/cache/php-5.5.10.tar.gz] action create
==> web: [2015-09-14T22:06:00+00:00] INFO: Processing remote_file[/var/chef/cache/php-5.5.10.tar.gz] action create (php::source line 43)
==> web: [2015-09-14T22:06:00+00:00] DEBUG: touching /var/chef/cache/php-5.5.10.tar.gz to create it
==> web: [2015-09-14T22:06:00+00:00] INFO: remote_file[/var/chef/cache/php-5.5.10.tar.gz] created file /var/chef/cache/php-5.5.10.tar.gz
==> web:
==> web:     - create new file /var/chef/cache/php-5.5.10.tar.gz
==> web: [2015-09-14T22:06:00+00:00] DEBUG: remote_file[/var/chef/cache/php-5.5.10.tar.gz] checking for changes
==> web: [2015-09-14T22:06:00+00:00] DEBUG: turning gzip compression off due to filename ending in gz
==> web: [2015-09-14T22:06:00+00:00] DEBUG: Cache control headers: {}
==> web: [2015-09-14T22:06:00+00:00] DEBUG: Initiating GET to http://us.php.net/distributions/php-5.5.10.tar.gz
==> web: [2015-09-14T22:06:00+00:00] DEBUG: ---- HTTP Request Header Data: ----
==> web: [2015-09-14T22:06:00+00:00] DEBUG: Streaming download from http://us.php.net/distributions/php-5.5.10.tar.gz to tempfile /tmp/chef-rest20150914-1761-30egyq
==> web: [2015-09-14T22:06:22+00:00] DEBUG: ---- HTTP Status and Header Data: ----
==> web: [2015-09-14T22:06:22+00:00] DEBUG: HTTP 1.1 200 OK
==> web: [2015-09-14T22:06:22+00:00] DEBUG: date: Mon, 14 Sep 2015 22:06:00 GMT
==> web: [2015-09-14T22:06:22+00:00] DEBUG: server: Apache/2.2.29 (FreeBSD) PHP/5.4.43 mod_ssl/2.2.29 OpenSSL/1.0.1l-freebsd DAV/2
==> web: [2015-09-14T22:06:22+00:00] DEBUG: last-modified: Wed, 21 Jan 2015 11:13:18 GMT
==> web: [2015-09-14T22:06:22+00:00] DEBUG: etag: "1286a7-1022b77-50d27a47b8f80"
==> web: [2015-09-14T22:06:22+00:00] DEBUG: accept-ranges: bytes
==> web: [2015-09-14T22:06:22+00:00] DEBUG: content-length: 16919415
==> web: [2015-09-14T22:06:22+00:00] DEBUG: connection: close
==> web: [2015-09-14T22:06:22+00:00] DEBUG: content-type: application/x-gzip
==> web: [2015-09-14T22:06:22+00:00] DEBUG: ---- End HTTP Status/Header Data ----
==> web: [2015-09-14T22:06:23+00:00] DEBUG: Creating directory /var/chef/cache/remote_file
==> web: [2015-09-14T22:06:23+00:00] DEBUG: calculating checksum of /tmp/chef-rest20150914-1761-30egyq to compare with
==> web: [2015-09-14T22:06:23+00:00] DEBUG: reading modes from /var/chef/cache/php-5.5.10.tar.gz file
==> web: [2015-09-14T22:06:23+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rest20150914-1761-30egyq
==> web: [2015-09-14T22:06:23+00:00] DEBUG: moving temporary file /tmp/chef-rest20150914-1761-30egyq into place at /var/chef/cache/php-5.5.10.tar.gz
==> web: [2015-09-14T22:06:23+00:00] INFO: remote_file[/var/chef/cache/php-5.5.10.tar.gz] updated file contents /var/chef/cache/php-5.5.10.tar.gz
==> web:
==> web:     - update content in file /var/chef/cache/php-5.5.10.tar.gz from none to abf751
==> web:         (file sizes exceed 10000000 bytes, diff output suppressed)
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:06:23+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:06:23+00:00] INFO: remote_file[/var/chef/cache/php-5.5.10.tar.gz] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web: [2015-09-14T22:06:23+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * bash[build php] action run
==> web: [2015-09-14T22:06:23+00:00] INFO: Processing bash[build php] action run (php::source line 50)
==> web: [2015-09-14T22:06:23+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:38+00:00] INFO: bash[build php] ran successfully
==> web:
==> web:     - execute "bash"  "/tmp/chef-script20150914-1761-11z2z5u"
==> web:   * directory[/etc/php5/cli] action create[2015-09-14T22:14:38+00:00] INFO: Processing directory[/etc/php5/cli] action create (php::source line 60)
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/cli] created directory /etc/php5/cli
==> web:
==> web:     - create new directory /etc/php5/cli[2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/cli] owner changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/cli] group changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/cli] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'[2015-09-14T22:14:38+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * directory[/etc/php5/conf.d] action create[2015-09-14T22:14:38+00:00] INFO: Processing directory[/etc/php5/conf.d] action create (php::source line 67)
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/conf.d] created directory /etc/php5/conf.d
==> web:
==> web:     - create new directory /etc/php5/conf.d[2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/conf.d] owner changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/conf.d] group changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] INFO: directory[/etc/php5/conf.d] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'[2015-09-14T22:14:38+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * template[/etc/php5/cli/php.ini] action create[2015-09-14T22:14:38+00:00] INFO: Processing template[/etc/php5/cli/php.ini] action create (php::source line 74)
==> web: [2015-09-14T22:14:38+00:00] DEBUG: touching /etc/php5/cli/php.ini to create it
==> web: [2015-09-14T22:14:38+00:00] INFO: template[/etc/php5/cli/php.ini] created file /etc/php5/cli/php.ini
==> web:
==> web:     - create new file /etc/php5/cli/php.ini
==> web: [2015-09-14T22:14:38+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1fndqg3 to compare with
==> web: [2015-09-14T22:14:38+00:00] DEBUG: running: diff -u /etc/php5/cli/php.ini /tmp/chef-rendered-template20150914-1761-1fndqg3
==> web: [2015-09-14T22:14:38+00:00] DEBUG: reading modes from /etc/php5/cli/php.ini file
==> web: [2015-09-14T22:14:38+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1fndqg3
==> web: [2015-09-14T22:14:38+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1fndqg3 into place at /etc/php5/cli/php.ini
==> web: [2015-09-14T22:14:38+00:00] INFO: template[/etc/php5/cli/php.ini] updated file contents /etc/php5/cli/php.ini
==> web:
==> web:     - update content in file /etc/php5/cli/php.ini from none to 3273af
==> web:         --- /etc/php5/cli/php.ini	2015-09-14 22:14:38.324508659 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1fndqg3	2015-09-14 22:14:38.328508644 +0000
==> web:         @@ -1 +1,1855 @@
==> web:         +[PHP]
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; About php.ini   ;
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; PHP's initialization file, generally called php.ini, is responsible for
==> web:         +; configuring many of the aspects of PHP's behavior.
==> web:         +
==> web:         +; PHP attempts to find and load this configuration from a number of locations.
==> web:         +; The following is a summary of its search order:
==> web:         +; 1. SAPI module specific location.
==> web:         +; 2. The PHPRC environment variable. (As of PHP 5.2.0)
==> web:         +; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
==> web:         +; 4. Current working directory (except CLI)
==> web:         +; 5. The web server's directory (for SAPI modules), or directory of PHP
==> web:         +; (otherwise in Windows)
==> web:         +; 6. The directory from the --with-config-file-path compile time option, or the
==> web:         +; Windows directory (C:\windows or C:\winnt)
==> web:         +; See the PHP docs for more specific information.
==> web:         +; http://php.net/configuration.file
==> web:         +
==> web:         +; The syntax of the file is extremely simple.  Whitespace and Lines
==> web:         +; beginning with a semicolon are silently ignored (as you probably guessed).
==> web:         +; Section headers (e.g. [Foo]) are also silently ignored, even though
==> web:         +; they might mean something in the future.
==> web:         +
==> web:         +; Directives following the section heading [PATH=/www/mysite] only
==> web:         +; apply to PHP files in the /www/mysite directory.  Directives
==> web:         +; following the section heading [HOST=www.example.com] only apply to
==> web:         +; PHP files served from www.example.com.  Directives set in these
==> web:         +; special sections cannot be overridden by user-defined INI files or
==> web:         +; at runtime. Currently, [PATH=] and [HOST=] sections only work under
==> web:         +; CGI/FastCGI.
==> web:         +; http://php.net/ini.sections
==> web:         +
==> web:         +; Directives are specified using the following syntax:
==> web:         +; directive = value
==> web:
==> web:         +; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
==> web:         +; Directives are variables used to configure PHP or PHP extensions.
==> web:         +; There is no name validation.  If PHP can't find an expected
==> web:         +; directive because it is not set or is mistyped, a default value will be used.
==> web:         +
==> web:         +; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
==> web:         +; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
==> web:         +; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
==> web:         +; previously set variable or directive (e.g. ${foo})
==> web:         +
==> web:         +; Expressions in the INI file are limited to bitwise operators and parentheses:
==> web:         +; |  bitwise OR
==> web:         +; ^  bitwise XOR
==> web:         +; &  bitwise AND
==> web:         +; ~  bitwise NOT
==> web:         +; !  boolean NOT
==> web:         +
==> web:         +; Boolean flags can be turned on using the values 1, On, True or Yes.
==> web:         +; They can be turned off using the values 0, Off, False or No.
==> web:         +
==> web:
==> web:         +; An empty string can be denoted by simply not writing anything after the equal
==> web:         +; sign, or by using the None keyword:
==> web:         +
==> web:         +;  foo =         ; sets foo to an empty string
==> web:         +;  foo = None    ; sets foo to an empty string
==> web:         +;  foo = "None"  ; sets foo to the string 'None'
==> web:         +
==> web:         +; If you use constants in your value, and these constants belong to a
==> web:         +; dynamically loaded extension (either a PHP extension or a Zend extension),
==> web:         +; you may only use these constants *after* the line that loads the extension.
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; About this file ;
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; PHP comes packaged with two INI files. One that is recommended to be used
==> web:         +; in production environments and one that is recommended to be used in
==> web:         +; development environments.
==> web:         +
==> web:         +; php.ini-production contains settings which hold security, performance and
==> web:         +; best practices at its core. But please be aware, these settings may break
==> web:         +; compatibility with older or less security conscience applications. We
==> web:         +; recommending using the production ini in production and testing environments.
==> web:         +
==> web:         +; php.ini-development is very similar to its production variant, except it's
==> web:         +; much more verbose when it comes to errors. We recommending using the
==> web:         +; development version only in development environments as errors shown to
==> web:         +; application users can inadvertently leak otherwise secure information.
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; Quick Reference ;
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; The following are all the settings which are different in either the production
==> web:         +; or development versions of the INIs with respect to PHP's default behavior.
==> web:         +; Please see the actual settings later in the document for more details as to why
==> web:         +; we recommend these changes in PHP's behavior.
==> web:         +
==> web:         +; allow_call_time_pass_reference
==> web:         +;   Default Value: On
==> web:         +;   Development Value: Off
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; display_errors
==> web:         +;   Default Value: On
==> web:         +;   Development Value: On
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; display_startup_errors
==> web:         +;   Default Value: Off
==> web:         +;   Development Value: On
==> web:         +;   Production Value: Off
==> web:
==> web:         +
==> web:         +; error_reporting
==> web:         +;   Default Value: E_ALL & ~E_NOTICE
==> web:         +;   Development Value: E_ALL | E_STRICT
==> web:         +;   Production Value: E_ALL & ~E_DEPRECATED
==> web:         +
==> web:         +; html_errors
==> web:         +;   Default Value: On
==> web:         +;   Development Value: On
==> web:         +;   Production value: Off
==> web:         +
==> web:         +; log_errors
==> web:         +;   Default Value: Off
==> web:         +;   Development Value: On
==> web:         +;   Production Value: On
==> web:         +
==> web:         +; magic_quotes_gpc
==> web:         +;   Default Value: On
==> web:         +;   Development Value: Off
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; max_input_time
==> web:         +;   Default Value: -1 (Unlimited)
==> web:         +;   Development Value: 60 (60 seconds)
==> web:         +;   Production Value: 60 (60 seconds)
==> web:         +
==> web:         +; output_buffering
==> web:         +;   Default Value: Off
==> web:         +;   Development Value: 4096
==> web:         +;   Production Value: 4096
==> web:
==> web:         +
==> web:         +; register_argc_argv
==> web:         +;   Default Value: On
==> web:         +;   Development Value: Off
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; register_long_arrays
==> web:         +;   Default Value: On
==> web:         +;   Development Value: Off
==> web:         +;   Production Value: Off
==> web:         +
==> web:
==> web:         +; request_order
==> web:         +;   Default Value: None
==> web:         +;   Development Value: "GP"
==> web:         +;   Production Value: "GP"
==> web:         +
==> web:         +; session.bug_compat_42
==> web:         +;   Default Value: On
==> web:         +;   Development Value: On
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; session.bug_compat_warn
==> web:         +;   Default Value: On
==> web:         +;   Development Value: On
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; session.gc_divisor
==> web:         +;   Default Value: 100
==> web:         +;   Development Value: 1000
==> web:         +;   Production Value: 1000
==> web:         +
==> web:         +; session.hash_bits_per_character
==> web:         +;   Default Value: 4
==> web:         +;   Development Value: 5
==> web:         +;   Production Value: 5
==> web:         +
==> web:         +; short_open_tag
==> web:         +;   Default Value: On
==> web:         +;   Development Value: Off
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; track_errors
==> web:         +;   Default Value: Off
==> web:         +;   Development Value: On
==> web:         +;   Production Value: Off
==> web:         +
==> web:         +; url_rewriter.tags
==> web:
==> web:         +;   Default Value: "a=href,area=href,frame=src,form=,fieldset="
==> web:         +;   Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
==> web:         +;   Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
==> web:         +
==> web:         +; variables_order
==> web:         +;   Default Value: "EGPCS"
==> web:         +;   Development Value: "GPCS"
==> web:         +;   Production Value: "GPCS"
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;;
==> web:         +; php.ini Options  ;
==> web:         +;;;;;;;;;;;;;;;;;;;;
==> web:         +; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
==> web:         +;user_ini.filename = ".user.ini"
==> web:         +
==> web:         +; To disable this feature set this option to empty value
==> web:         +;user_ini.filename =
==> web:         +
==> web:         +; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
==> web:         +;user_ini.cache_ttl = 300
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;;
==> web:         +; Language Options ;
==> web:         +;;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; Enable the PHP scripting language engine under Apache.
==> web:         +; http://php.net/engine
==> web:         +engine = On
==> web:         +
==> web:         +; This directive determines whether or not PHP will recognize code between
==> web:         +; <? and ?> tags as PHP source which should be processed as such. It's been
==> web:         +; recommended for several years that you not use the short tag "short cut" and
==> web:         +; instead to use the full <?php and ?> tag combination. With the wide spread use
==> web:         +; of XML and use of these tags by other languages, the server can become easily
==> web:         +; confused and end up parsing the wrong code in the wrong context. But because
==> web:         +; this short cut has been a feature for such a long time, it's currently still
==> web:
==> web:         +; supported for backwards compatibility, but we recommend you don't use them.
==> web:         +; Default Value: On
==> web:         +; Development Value: Off
==> web:         +; Production Value: Off
==> web:         +; http://php.net/short-open-tag
==> web:         +short_open_tag = On
==> web:         +
==> web:         +; Allow ASP-style  tags.
==> web:         +; http://php.net/asp-tags
==> web:         +asp_tags = Off
==> web:         +
==> web:         +; The number of significant digits displayed in floating point numbers.
==> web:         +; http://php.net/precision
==> web:         +precision = 14
==> web:         +
==> web:         +; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
==> web:         +; http://php.net/y2k-compliance
==> web:         +y2k_compliance = On
==> web:         +
==> web:         +; Output buffering is a mechanism for controlling how much output data
==> web:         +; (excluding headers and cookies) PHP should keep internally before pushing that
==> web:         +; data to the client. If your application's output exceeds this setting, PHP
==> web:         +; will send that data in chunks of roughly the size you specify.
==> web:         +; Turning on this setting and managing its maximum buffer size can yield some
==> web:         +; interesting side-effects depending on your application and web server.
==> web:         +; You may be able to send headers and cookies after you've already sent output
==> web:         +; through print or echo. You also may see performance benefits if your server is
==> web:         +; emitting less packets due to buffered output versus PHP streaming the output
==> web:         +; as it gets it. On production servers, 4096 bytes is a good setting for performance
==> web:         +; reasons.
==> web:         +; Note: Output buffering can also be controlled via Output Buffering Control
==> web:         +;   functions.
==> web:         +; Possible Values:
==> web:         +;   On = Enabled and buffer is unlimited. (Use with caution)
==> web:         +;   Off = Disabled
==> web:         +;   Integer = Enables the buffer and sets its maximum size in bytes.
==> web:         +; Note: This directive is hardcoded to Off for the CLI SAPI
==> web:         +; Default Value: Off
==> web:         +; Development Value: 4096
==> web:         +; Production Value: 4096
==> web:         +; http://php.net/output-buffering
==> web:         +output_buffering = 4096
==> web:         +
==> web:         +; You can redirect all of the output of your scripts to a function.  For
==> web:         +; example, if you set output_handler to "mb_output_handler", character
==> web:         +; encoding will be transparently converted to the specified encoding.
==> web:         +; Setting any output handler automatically turns on output buffering.
==> web:         +; Note: People who wrote portable scripts should not depend on this ini
==> web:         +;   directive. Instead, explicitly set the output handler using ob_start().
==> web:         +;   Using this ini directive may cause problems unless you know what script
==> web:         +;   is doing.
==> web:         +; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
==> web:         +;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
==> web:         +; Note: output_handler must be empty if this is set 'On' !!!!
==> web:         +;   Instead you must use zlib.output_handler.
==> web:         +; http://php.net/output-handler
==> web:         +;output_handler =
==> web:         +
==> web:         +; Transparent output compression using the zlib library
==> web:         +; Valid values for this option are 'off', 'on', or a specific buffer size
==> web:         +; to be used for compression (default is 4KB)
==> web:         +; Note: Resulting chunk size may vary due to nature of compression. PHP
==> web:         +;   outputs chunks that are few hundreds bytes each as a result of
==> web:         +;   compression. If you prefer a larger chunk size for better
==> web:         +;   performance, enable output_buffering in addition.
==> web:         +; Note: You need to use zlib.output_handler instead of the standard
==> web:         +;   output_handler, or otherwise the output will be corrupted.
==> web:         +; http://php.net/zlib.output-compression
==> web:         +zlib.output_compression = Off
==> web:         +
==> web:         +; http://php.net/zlib.output-compression-level
==> web:         +;zlib.output_compression_level = -1
==> web:         +
==> web:         +; You cannot specify additional output handlers if zlib.output_compression
==> web:         +; is activated here. This setting does the same as output_handler but in
==> web:         +; a different order.
==> web:         +; http://php.net/zlib.output-handler
==> web:         +;zlib.output_handler =
==> web:         +
==> web:         +; Implicit flush tells PHP to tell the output layer to flush itself
==> web:         +; automatically after every output block.  This is equivalent to calling the
==> web:         +; PHP function flush() after each and every call to print() or echo() and each
==> web:         +; and every HTML block.  Turning this option on has serious performance
==> web:         +; implications and is generally recommended for debugging purposes only.
==> web:         +; http://php.net/implicit-flush
==> web:
==> web:         +; Note: This directive is hardcoded to On for the CLI SAPI
==> web:         +implicit_flush = Off
==> web:         +
==> web:         +; The unserialize callback function will be called (with the undefined class'
==> web:         +; name as parameter), if the unserializer finds an undefined class
==> web:         +; which should be instantiated. A warning appears if the specified function is
==> web:         +; not defined, or if the function doesn't include/implement the missing class.
==> web:         +; So only set this entry, if you really want to implement such a
==> web:         +; callback-function.
==> web:         +unserialize_callback_func =
==> web:         +
==> web:         +; When floats & doubles are serialized store serialize_precision significant
==> web:         +; digits after the floating point. The default value ensures that when floats
==> web:         +; are decoded with unserialize, the data will remain the same.
==> web:         +serialize_precision = 100
==> web:         +
==> web:         +; This directive allows you to enable and disable warnings which PHP will issue
==> web:         +; if you pass a value by reference at function call time. Passing values by
==> web:         +; reference at function call time is a deprecated feature which will be removed
==> web:         +; from PHP at some point in the near future. The acceptable method for passing a
==> web:         +; value by reference to a function is by declaring the reference in the functions
==> web:         +; definition, not at call time. This directive does not disable this feature, it
==> web:         +; only determines whether PHP will warn you about it or not. These warnings
==> web:         +; should enabled in development environments only.
==> web:         +; Default Value: On (Suppress warnings)
==> web:         +; Development Value: Off (Issue warnings)
==> web:         +; Production Value: Off (Issue warnings)
==> web:         +; http://php.net/allow-call-time-pass-reference
==> web:         +allow_call_time_pass_reference = Off
==> web:         +
==> web:         +; Safe Mode
==> web:         +; http://php.net/safe-mode
==> web:         +safe_mode = Off
==> web:         +
==> web:         +; By default, Safe Mode does a UID compare check when
==> web:         +; opening files. If you want to relax this to a GID compare,
==> web:         +; then turn on safe_mode_gid.
==> web:         +; http://php.net/safe-mode-gid
==> web:         +safe_mode_gid = Off
==> web:         +
==> web:         +; When safe_mode is on, UID/GID checks are bypassed when
==> web:         +; including files from this directory and its subdirectories.
==> web:         +; (directory must also be in include_path or full path must
==> web:         +; be used when including)
==> web:         +; http://php.net/safe-mode-include-dir
==> web:         +safe_mode_include_dir =
==> web:         +
==> web:         +; When safe_mode is on, only executables located in the safe_mode_exec_dir
==> web:         +; will be allowed to be executed via the exec family of functions.
==> web:         +; http://php.net/safe-mode-exec-dir
==> web:         +safe_mode_exec_dir =
==> web:         +
==> web:         +; Setting certain environment variables may be a potential security breach.
==> web:         +; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
==> web:         +; the user may only alter environment variables whose names begin with the
==> web:         +; prefixes supplied here.  By default, users will only be able to set
==> web:         +; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
==> web:         +; Note:  If this directive is empty, PHP will let the user modify ANY
==> web:         +;   environment variable!
==> web:         +; http://php.net/safe-mode-allowed-env-vars
==> web:         +safe_mode_allowed_env_vars = PHP_
==> web:         +
==> web:         +; This directive contains a comma-delimited list of environment variables that
==> web:         +; the end user won't be able to change using putenv().  These variables will be
==> web:         +; protected even if safe_mode_allowed_env_vars is set to allow to change them.
==> web:         +; http://php.net/safe-mode-protected-env-vars
==> web:         +safe_mode_protected_env_vars = LD_LIBRARY_PATH
==> web:         +
==> web:         +; open_basedir, if set, limits all file operations to the defined directory
==> web:         +; and below.  This directive makes most sense if used in a per-directory
==> web:         +; or per-virtualhost web server configuration file. This directive is
==> web:         +; *NOT* affected by whether Safe Mode is turned On or Off.
==> web:         +; http://php.net/open-basedir
==> web:         +;open_basedir =
==> web:         +
==> web:         +; This directive allows you to disable certain functions for security reasons.
==> web:         +; It receives a comma-delimited list of function names. This directive is
==> web:         +; *NOT* affected by whether Safe Mode is turned On or Off.
==> web:         +; http://php.net/disable-functions
==> web:         +disable_functions =
==> web:         +
==> web:         +; This directive allows you to disable certain classes for security reasons.
==> web:         +; It receives a comma-delimited list of class names. This directive is
==> web:         +; *NOT* affected by whether Safe Mode is turned On or Off.
==> web:         +; http://php.net/disable-classes
==> web:         +disable_classes =
==> web:         +
==> web:         +; Colors for Syntax Highlighting mode.  Anything that's acceptable in
==> web:         +; <span style="color: ???????"> would work.
==> web:         +; http://php.net/syntax-highlighting
==> web:         +;highlight.string  = #DD0000
==> web:         +;highlight.comment = #FF9900
==> web:         +;highlight.keyword = #007700
==> web:         +;highlight.bg      = #FFFFFF
==> web:         +;highlight.default = #0000BB
==> web:         +;highlight.html    = #000000
==> web:         +
==> web:         +; If enabled, the request will be allowed to complete even if the user aborts
==> web:         +; the request. Consider enabling it if executing long requests, which may end up
==> web:         +; being interrupted by the user or a browser timing out. PHP's default behavior
==> web:         +; is to disable this feature.
==> web:         +; http://php.net/ignore-user-abort
==> web:         +;ignore_user_abort = On
==> web:         +
==> web:         +; Determines the size of the realpath cache to be used by PHP. This value should
==> web:         +; be increased on systems where PHP opens many files to reflect the quantity of
==> web:         +; the file operations performed.
==> web:         +; http://php.net/realpath-cache-size
==> web:         +;realpath_cache_size = 16k
==> web:         +
==> web:         +; Duration of time, in seconds for which to cache realpath information for a given
==> web:         +; file or directory. For systems with rarely changing files, consider increasing this
==> web:         +; value.
==> web:         +; http://php.net/realpath-cache-ttl
==> web:         +;realpath_cache_ttl = 120
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;
==> web:         +; Miscellaneous ;
==> web:         +;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; Decides whether PHP may expose the fact that it is installed on the server
==> web:         +; (e.g. by adding its signature to the Web server header).  It is no security
==> web:         +; threat in any way, but it makes it possible to determine whether you use PHP
==> web:         +; on your server or not.
==> web:         +; http://php.net/expose-php
==> web:         +expose_php = On
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; Resource Limits ;
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; Maximum execution time of each script, in seconds
==> web:         +; http://php.net/max-execution-time
==> web:         +; Note: This directive is hardcoded to 0 for the CLI SAPI
==> web:         +max_execution_time = 30
==> web:         +
==> web:         +; Maximum amount of time each script may spend parsing request data. It's a good
==> web:         +; idea to limit this time on productions servers in order to eliminate unexpectedly
==> web:         +; long running scripts.
==> web:         +; Note: This directive is hardcoded to -1 for the CLI SAPI
==> web:         +; Default Value: -1 (Unlimited)
==> web:         +; Development Value: 60 (60 seconds)
==> web:         +; Production Value: 60 (60 seconds)
==> web:         +; http://php.net/max-input-time
==> web:         +max_input_time = 60
==> web:         +
==> web:         +; Maximum input variable nesting level
==> web:         +; http://php.net/max-input-nesting-level
==> web:         +;max_input_nesting_level = 64
==> web:         +
==> web:         +; Maximum amount of memory a script may consume (128MB)
==> web:         +; http://php.net/memory-limit
==> web:         +memory_limit = -1
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
==> web:         +; Error handling and logging ;
==> web:         +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; This directive informs PHP of which errors, warnings and notices you would like
==> web:         +; it to take action for. The recommended way of setting values for this
==> web:         +; directive is through the use of the error level constants and bitwise
==> web:         +; operators. The error level constants are below here for convenience as well as
==> web:         +; some common settings and their meanings.
==> web:         +; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
==> web:         +; those related to E_NOTICE and E_STRICT, which together cover best practices and
==> web:         +; recommended coding standards in PHP. For performance reasons, this is the
==> web:         +; recommend error reporting setting. Your production server shouldn't be wasting
==> web:         +; resources complaining about best practices and coding standards. That's what
==> web:         +; development servers and development settings are for.
==> web:         +; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
==> web:         +; means it pretty much reports everything which is exactly what you want during
==> web:         +; development and early testing.
==> web:         +;
==> web:         +; Error Level Constants:
==> web:         +; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
==> web:         +; E_ERROR           - fatal run-time errors
==> web:         +; E_RECOVERABLE_ERROR  - almost fatal run-time errors
==> web:         +; E_WARNING         - run-time warnings (non-fatal errors)
==> web:         +; E_PARSE           - compile-time parse errors
==> web:         +; E_NOTICE          - run-time notices (these are warnings which often result
==> web:         +;                     from a bug in your code, but it's possible that it was
==> web:         +;                     intentional (e.g., using an uninitialized variable and
==> web:         +;                     relying on the fact it's automatically initialized to an
==> web:         +;                     empty string)
==> web:         +; E_STRICT          - run-time notices, enable to have PHP suggest changes
==> web:         +;                     to your code which will ensure the best interoperability
==> web:         +;                     and forward compatibility of your code
==> web:         +; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
==> web:         +; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
==> web:         +;                     initial startup
==> web:         +; E_COMPILE_ERROR   - fatal compile-time errors
==> web:         +; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
==> web:         +; E_USER_ERROR      - user-generated error message
==> web:         +; E_USER_WARNING    - user-generated warning message
==> web:         +; E_USER_NOTICE     - user-generated notice message
==> web:         +; E_DEPRECATED      - warn about code that will not work in future versions
==> web:         +;                     of PHP
==> web:         +; E_USER_DEPRECATED - user-generated deprecation warnings
==> web:         +;
==> web:         +; Common Values:
==> web:         +;   E_ALL & ~E_NOTICE  (Show all errors, except for notices and coding standards warnings.)
==> web:         +;   E_ALL & ~E_NOTICE | E_STRICT  (Show all errors, except for notices)
==> web:         +;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
==> web:         +;   E_ALL | E_STRICT  (Show all errors, warnings and notices including coding standards.)
==> web:         +; Default Value: E_ALL & ~E_NOTICE
==> web:         +; Development Value: E_ALL | E_STRICT
==> web:         +; Production Value: E_ALL & ~E_DEPRECATED
==> web:         +; http://php.net/error-reporting
==> web:         +error_reporting = E_ALL & ~E_DEPRECATED
==> web:         +
==> web:         +; This directive controls whether or not and where PHP will output errors,
==> web:         +; notices and warnings too. Error output is very useful during development, but
==> web:         +; it could be very dangerous in production environments. Depending on the code
==> web:         +; which is triggering the error, sensitive information could potentially leak
==> web:         +; out of your application such as database usernames and passwords or worse.
==> web:         +; It's recommended that errors be logged on production servers rather than
==> web:         +; having the errors sent to STDOUT.
==> web:         +; Possible Values:
==> web:         +;   Off = Do not display any errors
==> web:         +;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
==> web:         +;   On or stdout = Display errors to STDOUT
==> web:         +; Default Value: On
==> web:         +; Development Value: On
==> web:         +; Production Value: Off
==> web:         +; http://php.net/display-errors
==> web:         +display_errors = Off
==> web:         +
==> web:         +; The display of errors which occur during PHP's startup sequence are handled
==> web:         +; separately from display_errors. PHP's default behavior is to suppress those
==> web:         +; errors from clients. Turning the display of startup errors on can be useful in
==> web:         +; debugging configuration problems. But, it's strongly recommended that you
==> web:         +; leave this setting off on production servers.
==> web:         +; Default Value: Off
==> web:         +; Development Value: On
==> web:         +; Production Value: Off
==> web:         +; http://php.net/display-startup-errors
==> web:         +display_startup_errors = Off
==> web:         +
==> web:         +; Besides displaying errors, PHP can also log errors to locations such as a
==> web:         +; server-specific log, STDERR, or a location specified by the error_log
==> web:         +; directive found below. While errors should not be displayed on productions
==> web:         +; servers they should still be monitored and logging is a great way to do that.
==> web:         +; Default Value: Off
==> web:         +; Development Value: On
==> web:         +; Production Value: On
==> web:         +; http://php.net/log-errors
==> web:         +log_errors = On
==> web:         +
==> web:         +; Set maximum length of log_errors. In error_log information about the source is
==> web:         +; added. The default is 1024 and 0 allows to not apply any maximum length at all.
==> web:         +; http://php.net/log-errors-max-len
==> web:         +log_errors_max_len = 1024
==> web:         +
==> web:         +; Do not log repeated messages. Repeated errors must occur in same file on same
==> web:         +; line unless ignore_repeated_source is set true.
==> web:         +; http://php.net/ignore-repeated-errors
==> web:         +ignore_repeated_errors = Off
==> web:         +
==> web:         +; Ignore source of message when ignoring repeated messages. When this setting
==> web:         +; is On you will not log errors with repeated messages from different files or
==> web:         +; source lines.
==> web:         +; http://php.net/ignore-repeated-source
==> web:         +ignore_repeated_source = Off
==> web:         +
==> web:         +; If this parameter is set to Off, then memory leaks will not be shown (on
==> web:         +; stdout or in the log). This has only effect in a debug compile, and if
==> web:         +; error reporting includes E_WARNING in the allowed list
==> web:         +; http://php.net/report-memleaks
==> web:         +report_memleaks = On
==> web:         +
==> web:         +; This setting is on by default.
==> web:         +;report_zend_debug = 0
==> web:         +
==> web:         +; Store the last error/warning message in $php_errormsg (boolean). Setting this value
==> web:         +; to On can assist in debugging and is appropriate for development servers. It should
==> web:         +; however be disabled on production servers.
==> web:         +; Default Value: Off
==> web:         +; Development Value: On
==> web:         +; Production Value: Off
==> web:         +; http://php.net/track-errors
==> web:         +track_errors = Off
==> web:         +
==> web:         +; Turn off normal error reporting and emit XML-RPC error XML
==> web:         +; http://php.net/xmlrpc-errors
==> web:         +;xmlrpc_errors = 0
==> web:         +
==> web:         +; An XML-RPC faultCode
==> web:         +;xmlrpc_error_number = 0
==> web:         +
==> web:         +; When PHP displays or logs an error, it has the capability of inserting html
==> web:         +; links to documentation related to that error. This directive controls whether
==> web:         +; those HTML links appear in error messages or not. For performance and security
==> web:         +; reasons, it's recommended you disable this on production servers.
==> web:         +; Note: This directive is hardcoded to Off for the CLI SAPI
==> web:         +; Default Value: On
==> web:         +; Development Value: On
==> web:         +; Production value: Off
==> web:         +; http://php.net/html-errors
==> web:         +html_errors = Off
==> web:         +
==> web:         +; If html_errors is set On PHP produces clickable error messages that direct
==> web:         +; to a page describing the error or function causing the error in detail.
==> web:         +; You can download a copy of the PHP manual from http://php.net/docs
==> web:         +; and change docref_root to the base URL of your local copy including the
==> web:         +; leading '/'. You must also specify the file extension being used including
==> web:         +; the dot. PHP's default behavior is to leave these settings empty.
==> web:         +; N
==> web: ote: Never use this feature for production boxes.
==> web:         +; http://php.net/docref-root
==> web:         +; Examples
==> web:         +;docref_root = "/phpmanual/"
==> web:         +
==> web:         +; http://php.net/docref-ext
==> web:         +;docref_ext = .html
==> web:         +
==> web:         +; String to output before an error message. PHP's default behavior is to leave
==> web:         +; this setting blank.
==> web:         +; http://php.net/error-prepend-string
==> web:         +; Example:
==> web:         +;error_prepend_string = "<font color=#ff0000>"
==> web:         +
==> web:         +; String to output after an error message. PHP's default behavior is to leave
==> web:         +; this setting blank.
==> web:         +; http://php.net/error-append-string
==> web:         +; Example:
==> web:         +;error_append_string = "</font>"
==> web:         +
==> web:         +; Log errors to specified file. PHP's default behavior is to leave this value
==> web:         +; empty.
==> web:         +; http://php.net/error-log
==> web:         +; Example:
==> web:         +;error_log = php_errors.log
==> web:         +; Log errors to syslog (Event Log on NT, not valid in Windows 95).
==> web:         +;error_log = syslog
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;
==> web:         +; Data Handling ;
==> web:         +;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; The separator used in PHP generated URLs to separate arguments.
==> web:         +; PHP's default setting is "&".
==> web:         +; http://php.net/arg-separator.output
==> web:         +; Example:
==> web:         +;arg_separator.output = "&amp;"
==> web:         +
==> web:         +; List of separator(s) used by PHP to parse input URLs into variables.
==> web:         +; PHP's default setting is "&".
==> web:         +; NOTE: Every character in this directive is considered as separator!
==> web:         +; http://php.net/arg-separator.input
==> web:         +; Example:
==> web:         +;arg_separator.input = ";&"
==> web:         +
==> web:         +; This directive determines which super global arrays are registered when PHP
==> web:         +; starts up. If the register_globals directive is enabled, it also determines
==> web:         +; what order variables are populated into the global space. G,P,C,E & S are
==> web:         +; abbreviations for the following respective super globals: GET, POST, COOKIE,
==> web:         +; ENV and SERVER. There is a performance penalty paid for the registration of
==> web:         +; these arrays and because ENV is not as commonly used as the others, ENV is
==> web:         +; is not recommended on productions servers. You can still get access to
==> web:         +; the environment variables through getenv() should you need to.
==> web:         +; Default Value: "EGPCS"
==> web:         +; Development Value: "GPCS"
==> web:         +; Production Value: "GPCS";
==> web:         +; http://php.net/variables-order
==> web:         +variables_order = "GPCS"
==> web:         +
==> web:         +; This directive determines which super global data (G,P,C,E & S) should
==> web:         +; be registered into the super global array REQUEST. If so, it also determines
==> web:         +; the order in which that data is registered. The values for this directive are
==> web:         +; specified in the same manner as the variables_order directive, EXCEPT one.
==> web:         +; Leaving this value empty will cause PHP to use the value set in the
==> web:         +; variables_order directive. It does not mean it will leave the super globals
==> web:         +; array REQUEST empty.
==> web:         +; Default Value: None
==> web:         +; Development Value: "GP"
==> web:         +; Production Value: "GP"
==> web:         +; http://php.net/request-order
==> web:         +request_order = "GP"
==> web:         +
==> web:         +; Whether or not to register the EGPCS variables as global variables.  You may
==> web:         +; want to turn this off if you don't want to clutter your scripts' global scope
==> web:         +; with user data.
==> web:         +; You should do your best to write your scripts so that they do not require
==> web:         +; register_globals to be on;  Using form variables as globals can easily lead
==> web:         +; to possible security problems, if the code is not very well thought of.
==> web:         +; http://php.net/register-globals
==> web:         +register_globals = Off
==> web:         +
==> web:         +; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
==> web:         +; are registered by PHP or not. As they are deprecated, we obviously don't
==> web:         +; recommend you use them. They are on by default for compatibility reasons but
==> web:         +; they are not recommended on production servers.
==> web:         +; Default Value: On
==> web:         +; Development Value: Off
==> web:         +; Production Value: Off
==> web:         +; http://php.net/register-long-arrays
==> web:         +register_long_arrays = Off
==> web:         +
==> web:         +; This directive determines whether PHP registers $argv & $argc each time it
==> web:         +; runs. $argv contains an array of all the arguments passed to PHP when a script
==> web:         +; is invoked. $argc contains an integer representing the number of arguments
==> web:         +; that were passed when the script was invoked. These arrays are extremely
==> web:         +; useful when running scripts from the command line. When this directive is
==> web:         +; enabled, registering these variables consumes CPU cycles and memory each time
==> web:         +; a script is executed. For performance reasons, this feature should be disabled
==> web:         +; on production servers.
==> web:         +; Note: This directive is hardcoded to On for the CLI SAPI
==> web:         +; Default Value: On
==> web:         +; Development Value: Off
==> web:         +; Production Value: Off
==> web:         +; http://php.net/register-argc-argv
==> web:         +register_argc_argv = Off
==> web:         +
==> web:         +; When enabled, the SERVER and ENV variables are created when they're first
==> web:         +; used (Just In Time) instead of when the script starts. If these variables
==> web:         +; are not used within a script, having this directive on will result in a
==> web:         +; performance gain. The PHP directives register_globals, register_long_arrays,
==> web:         +; and register_argc_argv must be disabled for this directive to have any affect.
==> web:         +; http://php.net/auto-globals-jit
==> web:         +auto_globals_jit = On
==> web:         +
==> web:         +; Maximum size of POST data that PHP will accept.
==> web:         +; http://php.net/post-max-size
==> web:         +post_max_size = 8M
==> web:         +
==> web:         +; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
==> web:         +; escape any character sequences in GET, POST, COOKIE and ENV data which might
==> web:         +; otherwise corrupt data being placed in resources such as databases before
==> web:         +; making that data available to you. Because of character encoding issues and
==> web:         +; non-standard SQL implementations across many databases, it's not currently
==> web:         +; possible for this feature to be 100% accurate. PHP's default behavior is to
==> web:         +; enable the feature. We strongly recommend you use the escaping mechanisms
==> web:         +; designed specifically for the database your using instead of relying on this
==> web:         +; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
==> web:         +; scheduled for removal in PHP 6.
==> web:         +; Default Value: On
==> web:         +; Development Value: Off
==> web:         +; Production Value: Off
==> web:         +; http://php.net/magic-quotes-gpc
==> web:         +magic_quotes_gpc = Off
==> web:         +
==> web:         +; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
==> web:         +; http://php.net/magic-quotes-runtime
==> web:         +magic_quotes_runtime = Off
==> web:         +
==> web:         +; Use Sybase-style magic quotes (escape ' with '' instead of \').
==> web:         +; http://php.net/magic-quotes-sybase
==> web:         +magic_quotes_sybase = Off
==> web:         +
==> web:         +; Automatically add files before PHP document.
==> web:         +; http://php.net/auto-prepend-file
==> web:         +auto_prepend_file =
==> web:         +
==> web:         +; Automatically add files after PHP document.
==> web:         +; http://php.net/auto-append-file
==> web:         +auto_append_file =
==> web:         +
==> web:         +; By default, PHP will output a character encoding using
==> web:         +; the Content-type: header.  To disable sending of the charset, simply
==> web:         +; set it to be empty.
==> web:         +;
==> web:         +; PHP's built-in default is text/html
==> web:         +; http://php.net/default-mimetype
==> web:         +default_mimetype = "text/html"
==> web:         +
==> web:         +; PHP's default character set is set to empty.
==> web:         +; http://php.net/default-charset
==> web:         +;default_charset = "iso-8859-1"
==> web:         +
==> web:         +; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
==> web:         +; to disable this feature.
==> web:         +; http://php.net/always-populate-raw-post-data
==> web:         +;always_populate_raw_post_data = On
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;;;;;;;
==> web:         +; Paths and Directories ;
==> web:         +;;;;;;;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; UNIX: "/path1:/path2"
==> web:         +;include_path = ".:/usr/share/php"
==> web:         +;
==> web:         +; Windows: "\path1;\path2"
==> web:         +;include_path = ".;c:\php\includes"
==> web:         +;
==> web:         +; PHP's default setting for include_path is ".;/path/to/php/pear"
==> web:         +; http://php.net/include-path
==> web:         +
==> web:         +; The root of the PHP pages, used only if nonempty.
==> web:         +; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
==> web:         +; if you are running php as a CGI under any web server (other than IIS)
==> web:         +; see documentation for security issues.  The alternate is to use the
==> web:         +; cgi.force_redirect configuration below
==> web:         +; http://php.net/doc-root
==> web:         +doc_root =
==> web:         +
==> web:         +; The directory under which PHP opens the script using /~username used only
==> web:         +; if nonempty.
==> web:         +; http://php.net/user-dir
==> web:         +user_dir =
==> web:         +
==> web:         +; Directory in which the loadable extensions (modules) reside.
==> web:         +; http://php.net/extension-dir
==> web:         +; extension_dir = "./"
==> web:         +; On windows:
==> web:         +; extension_dir = "ext"
==> web:         +
==> web:         +; Whether or not to enable the dl() function.  The dl() function does NOT work
==> web:         +; properly in multithreaded servers, such as IIS or Zeus, and is automatically
==> web:         +; disabled on them.
==> web:         +; http://php.net/enable-dl
==> web:         +enable_dl = Off
==> web:         +
==> web:         +; cgi.force_redirect is necessary to provide security running PHP as a CGI under
==> web:         +; most web servers.  Left undefined, PHP turns this on by default.  You can
==> web:         +; turn it off here AT YOUR OWN RISK
==> web:         +; **You CAN safely turn this off for IIS, in fact, you MUST.**
==> web:         +; http://php.net/cgi.force-redirect
==> web:         +;cgi.force_redirect = 1
==> web:         +
==> web:         +; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
==> web:         +; every request. PHP's default behavior is to disable this feature.
==> web:         +;cgi.nph = 1
==> web:         +
==> web:         +; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
==> web:         +; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
==> web:         +; will look for to know it is OK to continue execution.  Setting this variable MAY
==> web:         +; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
==> web:         +; http://php.net/cgi.redirect-status-env
==> web:         +;cgi.redirect_status_env = ;
==> web:         +
==> web:         +; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
==> web:         +; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
==> web:         +; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
==> web:         +; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
==> web:         +; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
==> web:         +; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
==> web:         +; http://php.net/cgi.fix-pathinfo
==> web:         +;cgi.fix_pathinfo=1
==> web:         +
==> web:         +; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
==> web:         +; security tokens of the calling client.  This allows IIS to define the
==> web:         +; security context that the request runs under.  mod_fastcgi under Apache
==> web:         +; does not currently support this feature (03/17/2002)
==> web:         +; Set to 1 if running under IIS.  Default is zero.
==> web:         +; http://php.net/fastcgi.impersonate
==> web:         +;fastcgi.impersonate = 1;
==> web:         +
==> web:         +; Disable logging through FastCGI connection. PHP's default behavior is to enable
==> web:         +; this feature.
==> web:         +;fastcgi.logging = 0
==> web:         +
==> web:         +; cgi.rfc2616_headers configuration option tells PHP what type of headers to
==> web:         +; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
==> web:         +; is supported by Apache. When this option is set to 1 PHP will send
==> web:         +; RFC2616 compliant header.
==> web:         +; Default is zero.
==> web:         +; http://php.net/cgi.rfc2616-headers
==> web:         +;cgi.rfc2616_headers = 0
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;
==> web:         +; File Uploads ;
==> web:         +;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; Whether to allow HTTP file uploads.
==> web:         +; http://php.net/file-uploads
==> web:         +file_uploads = On
==> web:         +
==> web:         +; Temporary directory for HTTP uploaded files (will use system default if not
==> web:         +; specified).
==> web:         +; http://php.net/upload-tmp-dir
==> web:         +;upload_tmp_dir =
==> web:         +
==> web:         +; Maximum allowed size for uploaded files.
==> web:         +; http://php.net/upload-max-filesize
==> web:         +upload_max_filesize = 2M
==> web:         +
==> web:         +; Maximum number of files that can be uploaded via a single request
==> web:         +max_file_uploads = 20
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;
==> web:         +; Fopen wrappers ;
==> web:         +;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
==> web:         +; http://php.net/allow-url-fopen
==> web:         +allow_url_fopen = On
==> web:         +
==> web:         +; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
==> web:         +; http://php.net/allow-url-include
==> web:         +allow_url_include = Off
==> web:         +
==> web:         +; Define the anonymous ftp password (your email address). PHP's default setting
==> web:         +; for this is empty.
==> web:         +; http://php.net/from
==> web:         +;from="john@doe.com"
==> web:         +
==> web:         +; Define the User-Agent string. PHP's default setting for this is empty.
==> web:         +; http://php.net/user-agent
==> web:         +;user_agent="PHP"
==> web:         +
==> web:         +; Default timeout for socket based streams (seconds)
==> web:         +; http://php.net/default-socket-timeout
==> web:         +default_socket_timeout = 600
==> web:         +
==> web:         +; If your scripts have to deal with files from Macintosh systems,
==> web:         +; or you are running on a Mac and need to deal with files from
==> web:         +; unix or win32 systems, setting this flag will cause PHP to
==> web:         +; automatically detect the EOL character in those files so that
==> web:         +; fgets() and file() will work regardless of the source of the file.
==> web:         +; http://php.net/auto-detect-line-endings
==> web:         +;auto_detect_line_endings = Off
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;;;;
==> web:         +; Dynamic Extensions ;
==> web:         +;;;;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +; If you wish to have an extension loaded automatically, use the following
==> web:         +; syntax:
==> web:         +;
==> web:         +;   extension=modulename.extension
==> web:         +;
==> web:         +; For example, on Windows:
==> web:         +;
==> web:         +;   extension=msql.dll
==> web:         +;
==> web:         +; ... or under UNIX:
==> web:         +;
==> web:         +;   extension=msql.so
==> web:         +;
==> web:         +; ... or with a path:
==> web:         +;
==> web:         +;   extension=/path/to/extension/msql.so
==> web:         +;
==> web:         +; If you only provide the name of the extension, PHP will look for it in its
==> web:         +; default extension directory.
==> web:         +;
==> web:         +
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +; Module Settings ;
==> web:         +;;;;;;;;;;;;;;;;;;;
==> web:         +
==> web:         +[Date]
==> web:         +; Defines the default timezone used by the date functions
==> web:         +; http://php.net/date.timezone
==> web:         +;date.timezone =
==> web:         +
==> web:         +; http://php.net/date.default-latitude
==> web:         +;date.default_latitude = 31.7667
==> web:         +
==> web:         +; http://php.net/date.default-longitude
==> web:         +;date.default_longitude = 35.2333
==> web:         +
==> web:         +; http://php.net/date.sunrise-zenith
==> web:         +;date.sunrise_zenith = 90.583333
==> web:         +
==> web:         +; http://php.net/date.sunset-zenith
==> web:         +;date.sunset_zenith = 90.583333
==> web:         +
==> web:         +[filter]
==> web:         +; http://php.net/filter.default
==> web:         +;filter.default = unsafe_raw
==> web:         +
==> web:         +; http://php.net/filter.default-flags
==> web:         +;filter.default_flags =
==> web:         +
==> web:         +[iconv]
==> web:         +;iconv.input_encoding = ISO-8859-1
==> web:         +;iconv.internal_encoding = ISO-8859-1
==> web:         +;iconv.output_encoding = ISO-8859-1
==> web:         +
==> web:         +[intl]
==> web:         +;intl.default_locale =
==> web:         +; This directive allows you to produce PHP errors when some error
==> web:         +; happens within intl functions. The value is the level of the error produced.
==> web:         +; Default is 0, which d
==> web: oes not produce any errors.
==> web:         +;intl.error_level = E_WARNING
==> web:         +
==> web:         +[sqlite]
==> web:         +; http://php.net/sqlite.assoc-case
==> web:         +;sqlite.assoc_case = 0
==> web:         +
==> web:         +[sqlite3]
==> web:         +;sqlite3.extension_dir =
==> web:         +
==> web:         +[Pcre]
==> web:         +;PCRE library backtracking limit.
==> web:         +; http://php.net/pcre.backtrack-limit
==> web:         +;pcre.backtrack_limit=100000
==> web:         +
==> web:         +;PCRE library recursion limit.
==> web:         +;Please note that if you set this value to a high number you may consume all
==> web:         +;the available process stack and eventually crash PHP (due to reaching the
==> web:         +;stack size limit imposed by the Operating System).
==> web:         +; http://php.net/pcre.recursion-limit
==> web:         +;pcre.recursion_limit=100000
==> web:         +
==> web:         +[Pdo]
==> web:         +; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
==> web:         +; http://php.net/pdo-odbc.connection-pooling
==> web:         +;pdo_odbc.connection_pooling=strict
==> web:         +
==> web:         +;pdo_odbc.db2_instance_name
==> web:         +
==> web:         +[Pdo_mysql]
==> web:         +; If mysqlnd is used: Number of cache slots for the internal result set cache
==> web:         +; http://php.net/pdo_mysql.cache_size
==> web:         +pdo_mysql.cache_size = 2000
==> web:         +
==> web:         +; Default socket name for local MySQL connects.  If empty, uses the built-in
==> web:         +; MySQL defaults.
==> web:         +; http://php.net/pdo_mysql.default-socket
==> web:         +pdo_mysql.default_socket=
==> web:         +
==> web:         +[Phar]
==> web:         +; http://php.net/phar.readonly
==> web:         +;phar.readonly = On
==> web:         +
==> web:         +; http://php.net/phar.require-hash
==> web:         +;phar.require_hash = On
==> web:         +
==> web:         +;phar.cache_list =
==> web:         +
==> web:         +[Syslog]
==> web:         +; Whether or not to define the various syslog variables (e.g. $LOG_PID,
==> web:         +; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
==> web:         +; runtime, you can define these variables by calling define_syslog_variables().
==> web:         +; http://php.net/define-syslog-variables
==> web:         +define_syslog_variables  = Off
==> web:         +
==> web:         +[mail function]
==> web:         +; For Win32 only.
==> web:         +; http://php.net/smtp
==> web:         +SMTP = localhost
==> web:         +; http://php.net/smtp-port
==> web:         +smtp_port = 25
==> web:         +
==> web:         +; For Win32 only.
==> web:         +; http://php.net/sendmail-from
==> web:         +;sendmail_from = me@example.com
==> web:         +
==> web:         +; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
==> web:         +; http://php.net/sendmail-path
==> web:         +;sendmail_path =
==> web:         +
==> web:         +; Force the addition of the specified parameters to be passed as extra parameters
==> web:         +; to the sendmail binary. These parameters will always replace the value of
==> web:         +; the 5th parameter to mail(), even in safe mode.
==> web:         +;mail.force_extra_parameters =
==> web:         +
==> web:         +; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
==> web:         +mail.add_x_header = On
==> web:         +
==> web:         +; Log all mail() calls including the full path of the script, line #, to address and headers
==> web:         +;mail.log =
==> web:         +
==> web:         +[SQL]
==> web:         +; http://php.net/sql.safe-mode
==> web:         +sql.safe_mode = Off
==> web:         +
==> web:         +[ODBC]
==> web:         +; http://php.net/odbc.default-db
==> web:         +;odbc.default_db    =  Not yet implemented
==> web:         +
==> web:         +; http://php.net/odbc.default-user
==> web:         +;odbc.default_user  =  Not yet implemented
==> web:         +
==> web:         +; http://php.net/odbc.default-pw
==> web:         +;odbc.default_pw    =  Not yet implemented
==> web:         +
==> web:         +; Controls the ODBC cursor model.
==> web:         +; Default: SQL_CURSOR_STATIC (default).
==> web:         +;odbc.default_cursortype
==> web:         +
==> web:         +; Allow or prevent persistent links.
==> web:         +; http://php.net/odbc.allow-persistent
==> web:         +odbc.allow_persistent = On
==> web:         +
==> web:         +; Check that a connection is still valid before reuse.
==> web:         +; http://php.net/odbc.check-persistent
==> web:         +odbc.check_persistent = On
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +; http://php.net/odbc.max-persistent
==> web:         +odbc.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent + non-persistent).  -1 means no limit.
==> web:         +; http://php.net/odbc.max-links
==> web:         +odbc.max_links = -1
==> web:         +
==> web:         +; Handling of LONG fields.  Returns number of bytes to variables.  0 means
==> web:         +; passthru.
==> web:         +; http://php.net/odbc.defaultlrl
==> web:         +odbc.defaultlrl = 4096
==> web:         +
==> web:         +; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
==> web:         +; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
==> web:         +; of odbc.defaultlrl and odbc.defaultbinmode
==> web:         +; http://php.net/odbc.defaultbinmode
==> web:         +odbc.defaultbinmode = 1
==> web:         +
==> web:         +;birdstep.max_links = -1
==> web:         +
==> web:         +[Interbase]
==> web:         +; Allow or prevent persistent links.
==> web:         +ibase.allow_persistent = 1
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +ibase.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent + non-persistent).  -1 means no limit.
==> web:         +ibase.max_links = -1
==> web:         +
==> web:         +; Default database name for ibase_connect().
==> web:         +;ibase.default_db =
==> web:         +
==> web:         +; Default username for ibase_connect().
==> web:         +;ibase.default_user =
==> web:         +
==> web:         +; Default password for ibase_connect().
==> web:         +;ibase.default_password =
==> web:         +
==> web:         +; Default charset for ibase_connect().
==> web:         +;ibase.default_charset =
==> web:         +
==> web:         +; Default timestamp format.
==> web:         +ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
==> web:         +
==> web:         +; Default date format.
==> web:         +ibase.dateformat = "%Y-%m-%d"
==> web:         +
==> web:         +; Default time format.
==> web:         +ibase.timeformat = "%H:%M:%S"
==> web:         +
==> web:         +[MySQL]
==> web:         +; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
==> web:         +; http://php.net/mysql.allow_local_infile
==> web:         +mysql.allow_local_infile = On
==> web:         +
==> web:         +; Allow or prevent persistent links.
==> web:         +; http://php.net/mysql.allow-persistent
==> web:         +mysql.allow_persistent = On
==> web:         +
==> web:         +; If mysqlnd is used: Number of cache slots for the internal result set cache
==> web:         +; http://php.net/mysql.cache_size
==> web:         +mysql.cache_size = 2000
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +; http://php.net/mysql.max-persistent
==> web:         +mysql.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent + non-persistent).  -1 means no limit.
==> web:         +; http://php.net/mysql.max-links
==> web:         +mysql.max_links = -1
==> web:         +
==> web:         +; Default port number for mysql_connect().  If unset, mysql_connect() will use
==> web:         +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
==> web:         +; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
==> web:         +; at MYSQL_PORT.
==> web:         +; http://php.net/mysql.default-port
==> web:         +mysql.default_port =
==> web:         +
==> web:         +; Default socket name for local MySQL connects.  If empty, uses the built-in
==> web:         +; MySQL defaults.
==> web:         +; http://php.net/mysql.default-socket
==> web:         +mysql.default_socket =
==> web:         +
==> web:         +; Default host for mysql_connect() (doesn't apply in safe mode).
==> web:         +; http://php.net/mysql.default-host
==> web:         +mysql.default_host =
==> web:         +
==> web:         +; Default user for mysql_connect() (doesn't apply in safe mode).
==> web:         +; http://php.net/mysql.default-user
==> web:         +mysql.default_user =
==> web:         +
==> web:         +; Default password for mysql_connect() (doesn't apply in safe mode).
==> web:         +; Note that this is generally a *bad* idea to store passwords in this file.
==> web:         +; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
==> web:         +; and reveal this password!  And of course, any users with read access to this
==> web:         +; file will be able to reveal the password as well.
==> web:         +; http://php.net/mysql.default-password
==> web:         +mysql.default_password =
==> web:         +
==> web:         +; Maximum time (in seconds) for connect timeout. -1 means no limit
==> web:         +; http://php.net/mysql.connect-timeout
==> web:         +mysql.connect_timeout = 600
==> web:         +
==> web:         +; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
==> web:         +; SQL-Errors will be displayed.
==> web:         +; http://php.net/mysql.trace-mode
==> web:         +mysql.trace_mode = Off
==> web:         +
==> web:         +[MySQLi]
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +; http://php.net/mysqli.max-persistent
==> web:         +mysqli.max_persistent = -1
==> web:         +
==> web:         +; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
==> web:         +; http://php.net/mysqli.allow_local_infile
==> web:         +;mysqli.allow_local_infile = On
==> web:         +
==> web:         +; Allow or prevent persistent links.
==> web:         +; http://php.net/mysqli.allow-persistent
==> web:         +mysqli.allow_persistent = On
==> web:         +
==> web:         +; Maximum number of links.  -1 means no limit.
==> web:         +; http://php.net/mysqli.max-links
==> web:         +mysqli.max_links = -1
==> web:         +
==> web:         +; If mysqlnd is used: Number of cache slots for the internal result set cache
==> web:         +; http://php.net/mysqli.cache_size
==> web:         +mysqli.cache_size = 2000
==> web:         +
==> web:         +; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
==> web:         +; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
==> web:         +; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
==> web:         +; at MYSQL_PORT.
==> web:         +; http://php.net/mysqli.default-port
==> web:         +mysqli.default_port = 3306
==> web:         +
==> web:         +; Default socket name for local MySQL connects.  If empty, uses the built-in
==> web:         +; MySQL defaults.
==> web:         +; http://php.net/mysqli.default-socket
==> web:         +mysqli.default_socket =
==> web:         +
==> web:         +; Default host for mysql_connect() (doesn't apply in safe mode).
==> web:         +; http://php.net/mysqli.default-host
==> web:         +mysqli.default_host =
==> web:         +
==> web:         +; Default user for mysql_connect() (doesn't apply in safe mode).
==> web:         +; http://php.net/mysqli.default-user
==> web:         +mysqli.default_user =
==> web:         +
==> web:         +; Default password for mysqli_connect() (doesn't apply in safe mode).
==> web:         +; Note that this is generally a *bad* idea to store passwords in this file.
==> web:         +; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
==> web:         +; and reveal this password!  And of course, any users with read access to this
==> web:         +; file will be able to reveal the password as well.
==> web:         +; http://php.net/mysqli.default-pw
==> web:         +mysqli.default_pw =
==> web:         +
==> web:         +; Allow or prevent reconnect
==> web:         +mysqli.reconnect = Off
==> web:         +
==> web:         +[mysqlnd]
==> web:         +; Enable / Disable collection of general statstics by mysqlnd which can be
==> web:         +; used to tune and monitor MySQL operations.
==> web:         +; http://php.net/mysqlnd.collect_statistics
==> web:         +mysqlnd.collect_statistics = On
==> web:         +
==> web:         +; Enable / Disable collection of memory usage statstics by mysqlnd which can be
==> web:         +; used to tune and monitor MySQL operations.
==> web:         +; http://php.net/mysqlnd.collect_memory_statistics
==> web:         +mysqlnd.collect_memory_statistics = Off
==> web:         +
==> web:         +; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
==> web:         +; http://php.net/mysqlnd.net_cmd_buffer_size
==> web:         +;mysqlnd.net_cmd_buffer_size = 2048
==> web:         +
==> web:         +; Size of a pre-allocated buffer used for reading data sent by the server in
==> web:         +; bytes.
==> web:         +; http://php.net/mysqlnd.net_read_buffer_size
==> web:         +;mysqlnd.net_read_buffer_size = 32768
==> web:         +
==> web:         +[OCI8]
==> web:         +
==> web:         +; Connection: Enables privileged connections using external
==> web:         +; credentials (OCI_SYSOPER, OCI_SYSDBA)
==> web:         +; http://php.net/oci8.privileged-connect
==> web:         +;oci8.privileged_connect = Off
==> web:         +
==> web:         +; Connection: The maximum number of persistent OCI8 connections per
==> web:         +; process. Using -1 means no limit.
==> web:         +; http://php.net/oci8.max-persistent
==> web:         +;oci8.max_persistent = -1
==> web:         +
==> web:         +; Connection: The maximum number of seconds a process is allowed to
==> web:         +; maintain an idle persistent connection. Using -1 means idle
==> web:         +; persistent connections will be maintained forever.
==> web:         +; http://php.net/oci8.persistent-timeout
==> web:         +;oci8.persistent_timeout = -1
==> web:         +
==> web:         +; Connection: The number of seconds that must pass before issuing a
==> web:         +; ping during oci_pconnect() to check the connection validity. When
==> web:         +; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
==> web:         +; pings completely.
==> web:         +; http://php.net/oci8.ping-interval
==> web:         +;oci8.ping_interval = 60
==> web:         +
==> web:         +; Connection: Set this to a user chosen connection class to be used
==> web:         +; for all pooled server requests with Oracle 11g Database Resident
==> web:         +; Connection Pooling (DRCP).  To use DRCP, this value should be set to
==> web:         +; the same string for all web servers running the same application,
==> web:         +; the database pool must be configured, and the connection string must
==> web:         +; specify to use a pooled server.
==> web:         +;oci8.connection_class =
==> web:         +
==> web:         +; High Availability: Using On lets PHP receive Fast Application
==> web:         +; Notification (FAN) events generated when a database node fails. The
==> web:         +; database must also be configured to post FAN events.
==> web:         +;oci8.events = Off
==> web:         +
==> web:         +; Tuning: This option enables statement caching, and specifies how
==> web:         +; many statements to cache. Using 0 disables statement caching.
==> web:         +; http://php.net/oci8.statement-cache-size
==> web:         +;oci8.statement_cache_size = 20
==> web:         +
==> web:         +; Tuning: Enables statement prefetching and sets the default number of
==> web:         +; rows that will be fetched automatically after statement execution.
==> web:         +; http://php.net/oci8.default-prefetch
==> web:         +;oci8.default_prefetch = 100
==> web:         +
==> web:         +; Compatibility. Using On means oci_close() will not close
==> web:         +; oci_connect() and oci_new_connect() connections.
==> web:         +; http://php.net/oci8.old-oci-close-semantics
==> web:         +;oci8.old_oci_close_semantics = Off
==> web:         +
==> web:         +[PostgresSQL]
==> web:         +; Allow or prevent persistent links.
==> web:         +; http://php.net/pgsql.allow-persistent
==> web:         +pgsql.allow_persistent = On
==> web:         +
==> web:         +; Detect broken persistent links always with pg_pconnect().
==> web:         +; Auto reset feature requires a little overheads.
==> web:         +; http://php.net/pgsql.auto-reset-persistent
==> web:         +pgsql.auto_reset_persistent = Off
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +; http://php.net/pgsql.max-persistent
==> web:         +pgsql.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent+non persistent).  -1 means no limit.
==> web:         +; http://php.net/pgsql.max-links
==> web:         +pgsql.max_links = -1
==> web:         +
==> web:         +; Ignore PostgreSQL backends Notice message or not.
==> web:         +; Notice message logging require a little overheads.
==> web:         +; http://php.net/pgsql.ignore-notice
==> web:         +pgsql.ignore_notice = 0
==> web:         +
==> web:         +; Log PostgreSQL backends Noitce message or not.
==> web:         +; Unless pgsql.ignore_notice=0, module cannot log notice message.
==> web:         +; http://php.net/pgsql.log-notice
==> web:         +pgsql.log_notice = 0
==> web:         +
==> web:         +[Sybase-CT]
==> web:         +; Allow or prevent persistent links.
==> web:         +; http://php.net/sybct.allow-persistent
==> web:         +sybct.allow_persistent = On
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +; http://php.net/sybct.max-persistent
==> web:         +sybct.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent + non-persistent).  -1 means no limit.
==> web:         +; http://php.net/sybct.max-links
==> web:         +sybct.max_links = -1
==> web:         +
==> web:         +; Minimum server message severity to display.
==> web:         +; http://php.net/sybct.min-server-severity
==> web:         +sybct.min_server_severity = 10
==> web:         +
==> web:         +; Minimum client message severity to display.
==> web:         +; http://php.net/sybct.min-client-severity
==> web:         +sybct.min_client_severity = 10
==> web:         +
==> web:         +; Set per-context timeout
==> web:         +; http://php.net/sybct.timeout
==> web:         +;sybct.timeout=
==> web:         +
==> web:         +;sybct.packet_size
==> web:         +
==> web:         +; The maximum time in seconds to wait for a connection att
==> web: empt to succeed before returning failure.
==> web:         +; Default: one minute
==> web:         +;sybct.login_timeout=
==> web:         +
==> web:         +; The name of the host you claim to be connecting from, for display by sp_who.
==> web:         +; Default: none
==> web:         +;sybct.hostname=
==> web:         +
==> web:         +; Allows you to define how often deadlocks are to be retried. -1 means "forever".
==> web:         +; Default: 0
==> web:         +;sybct.deadlock_retry_count=
==> web:         +
==> web:         +[bcmath]
==> web:         +; Number of decimal digits for all bcmath functions.
==> web:         +; http://php.net/bcmath.scale
==> web:         +bcmath.scale = 0
==> web:         +
==> web:         +[browscap]
==> web:         +; http://php.net/browscap
==> web:         +;browscap = extra/browscap.ini
==> web:         +
==> web:         +[Session]
==> web:         +; Handler used to store/retrieve data.
==> web:         +; http://php.net/session.save-handler
==> web:         +session.save_handler = files
==> web:         +
==> web:         +; Argument passed to save_handler.  In the case of files, this is the path
==> web:         +; where data files are stored. Note: Windows users have to change this
==> web:         +; variable in order to use PHP's session functions.
==> web:         +;
==> web:         +; The path can be defined as:
==> web:         +;
==> web:         +;     session.save_path = "N;/path"
==> web:         +;
==> web:         +; where N is an integer.  Instead of storing all the session files in
==> web:         +; /path, what this will do is use subdirectories N-levels deep, and
==> web:         +; store the session data in those directories.  This is useful if you
==> web:         +; or your OS have problems with lots of files in one directory, and is
==> web:         +; a more efficient layout for servers that handle lots of sessions.
==> web:         +;
==> web:         +; NOTE 1: PHP will not create this directory structure automatically.
==> web:         +;         You can use the script in the ext/session dir for that purpose.
==> web:         +; NOTE 2: See the section on garbage collection below if you choose to
==> web:         +;         use subdirectories for session storage
==> web:         +;
==> web:         +; The file storage module creates files using mode 600 by default.
==> web:         +; You can change that by using
==> web:         +;
==> web:         +;     session.save_path = "N;MODE;/path"
==> web:         +;
==> web:         +; where MODE is the octal representation of the mode. Note that this
==> web:         +; does not overwrite the process's umask.
==> web:         +; http://php.net/session.save-path
==> web:         +;session.save_path = "/tmp"
==> web:         +
==> web:         +; Whether to use cookies.
==> web:         +; http://php.net/session.use-cookies
==> web:         +session.use_cookies = 1
==> web:         +
==> web:         +; http://php.net/session.cookie-secure
==> web:         +;session.cookie_secure =
==> web:         +
==> web:         +; This option forces PHP to fetch and use a cookie for storing and maintaining
==> web:         +; the session id. We encourage this operation as it's very helpful in combatting
==> web:         +; session hijacking when not specifying and managing your own session id. It is
==> web:         +; not the end all be all of session hijacking defense, but it's a good start.
==> web:         +; http://php.net/session.use-only-cookies
==> web:         +session.use_only_cookies = 1
==> web:         +
==> web:         +; Name of the session (used as cookie name).
==> web:         +; http://php.net/session.name
==> web:         +session.name = PHPSESSID
==> web:         +
==> web:         +; Initialize session on request startup.
==> web:         +; http://php.net/session.auto-start
==> web:         +session.auto_start = 0
==> web:         +
==> web:         +; Lifetime in seconds of cookie or, if 0, until browser is restarted.
==> web:         +; http://php.net/session.cookie-lifetime
==> web:         +session.cookie_lifetime = 0
==> web:         +
==> web:         +; The path for which the cookie is valid.
==> web:         +; http://php.net/session.cookie-path
==> web:         +session.cookie_path = /
==> web:         +
==> web:         +; The domain for which the cookie is valid.
==> web:         +; http://php.net/session.cookie-domain
==> web:         +session.cookie_domain =
==> web:         +
==> web:         +; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
==> web:         +; http://php.net/session.cookie-httponly
==> web:         +session.cookie_httponly =
==> web:         +
==> web:         +; Handler used to serialize data.  php is the standard serializer of PHP.
==> web:         +; http://php.net/session.serialize-handler
==> web:         +session.serialize_handler = php
==> web:         +
==> web:         +; Defines the probability that the 'garbage collection' process is started
==> web:         +; on every session initialization. The probability is calculated by using
==> web:         +; gc_probability/gc_divisor. Where session.gc_probability is the numerator
==> web:         +; and gc_divisor is the denominator in the equation. Setting this value to 1
==> web:         +; when the session.gc_divisor value is 100 will give you approximately a 1% chance
==> web:         +; the gc will run on any give request.
==> web:         +; Default Value: 1
==> web:         +; Development Value: 1
==> web:         +; Production Value: 1
==> web:         +; http://php.net/session.gc-probability
==> web:         +session.gc_probability = 1
==> web:         +
==> web:         +; Defines the probability that the 'garbage collection' process is started on every
==> web:         +; session initialization. The probability is calculated by using the following equation:
==> web:         +; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
==> web:         +; session.gc_divisor is the denominator in the equation. Setting this value to 1
==> web:         +; when the session.gc_divisor value is 100 will give you approximately a 1% chance
==> web:         +; the gc will run on any give request. Increasing this value to 1000 will give you
==> web:         +; a 0.1% chance the gc will run on any give request. For high volume production servers,
==> web:         +; this is a more efficient approach.
==> web:         +; Default Value: 100
==> web:         +; Development Value: 1000
==> web:         +; Production Value: 1000
==> web:         +; http://php.net/session.gc-divisor
==> web:         +session.gc_divisor = 1000
==> web:         +
==> web:         +; After this number of seconds, stored data will be seen as 'garbage' and
==> web:         +; cleaned up by the garbage collection process.
==> web:         +; http://php.net/session.gc-maxlifetime
==> web:         +session.gc_maxlifetime = 1440
==> web:         +
==> web:         +; NOTE: If you are using the subdirectory option for storing session files
==> web:         +;       (see session.save_path above), then garbage collection does *not*
==> web:         +;       happen automatically.  You will need to do your own garbage
==> web:         +;       collection through a shell script, cron entry, or some other method.
==> web:         +;       For example, the following script would is the equivalent of
==> web:         +;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
==> web:         +;          cd /path/to/sessions; find -cmin +24 | xargs rm
==> web:         +
==> web:         +; PHP 4.2 and less have an undocumented feature/bug that allows you to
==> web:         +; to initialize a session variable in the global scope, even when register_globals
==> web:         +; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
==> web:         +; You can disable the feature and the warning separately. At this time,
==> web:         +; the warning is only displayed, if bug_compat_42 is enabled. This feature
==> web:         +; introduces some serious security problems if not handled correctly. It's
==> web:         +; recommended that you do not use this feature on production servers. But you
==> web:         +; should enable this on development servers and enable the warning as well. If you
==> web:         +; do not enable the feature on development servers, you won't be warned when it's
==> web:         +; used and debugging errors caused by this can be difficult to track down.
==> web:         +; Default Value: On
==> web:         +; Development Value: On
==> web:         +; Production Value: Off
==> web:         +; http://php.net/session.bug-compat-42
==> web:         +session.bug_compat_42 = Off
==> web:         +
==> web:         +; This setting controls whether or not you are warned by PHP when initializing a
==> web:         +; session value into the global space. session.bug_compat_42 must be enabled before
==> web:         +; these warnings can be issued by PHP. See the directive above for more information.
==> web:         +; Default Value: On
==> web:         +; Development Value: On
==> web:         +; Production Value: Off
==> web:         +; http://php.net/session.bug-compat-warn
==> web:         +session.bug_compat_warn = Off
==> web:         +
==> web:         +; Check HTTP Referer to invalidate externally stored URLs containing ids.
==> web:         +; HTTP_REFERER has to contain this substring for the session to be
==> web:         +; considered as valid.
==> web:         +; http://php.net/session.referer-check
==> web:         +session.referer_check =
==> web:         +
==> web:         +; How many bytes to read from the file.
==> web:         +; http://php.net/session.entropy-length
==> web:         +session.entropy_length = 0
==> web:         +
==> web:         +; Specified here to create the session id.
==> web:         +; http://php.net/session.entropy-file
==> web:         +;session.entropy_file = /dev/urandom
==> web:         +session.entropy_file =
==> web:         +
==> web:         +; http://php.net/session.entropy-length
==> web:         +;session.entropy_length = 16
==> web:         +
==> web:         +; Set to {nocache,private,public,} to determine HTTP caching aspects
==> web:         +; or leave this empty to avoid sending anti-caching headers.
==> web:         +; http://php.net/session.cache-limiter
==> web:         +session.cache_limiter = nocache
==> web:         +
==> web:         +; Document expires after n minutes.
==> web:         +; http://php.net/session.cache-expire
==> web:         +session.cache_expire = 180
==> web:         +
==> web:         +; trans sid support is disabled by default.
==> web:         +; Use of trans sid may risk your users security.
==> web:         +; Use this option with caution.
==> web:         +; - User may send URL contains active session ID
==> web:         +;   to other person via. email/irc/etc.
==> web:         +; - URL that contains active session ID may be stored
==> web:         +;   in publically accessible computer.
==> web:         +; - User may access your site with the same session ID
==> web:         +;   always using URL stored in browser's history or bookmarks.
==> web:         +; http://php.net/session.use-trans-sid
==> web:         +session.use_trans_sid = 0
==> web:         +
==> web:         +; Select a hash function for use in generating session ids.
==> web:         +; Possible Values
==> web:         +;   0  (MD5 128 bits)
==> web:         +;   1  (SHA-1 160 bits)
==> web:         +; This option may also be set to the name of any hash function supported by
==> web:         +; the hash extension. A list of available hashes is returned by the hash_alogs()
==> web:         +; function.
==> web:         +; http://php.net/session.hash-function
==> web:         +session.hash_function = 0
==> web:         +
==> web:         +; Define how many bits are stored in each character when converting
==> web:         +; the binary hash data to something readable.
==> web:         +; Possible values:
==> web:         +;   4  (4 bits: 0-9, a-f)
==> web:         +;   5  (5 bits: 0-9, a-v)
==> web:         +;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
==> web:         +; Default Value: 4
==> web:         +; Development Value: 5
==> web:         +; Production Value: 5
==> web:         +; http://php.net/session.hash-bits-per-character
==> web:         +session.hash_bits_per_character = 5
==> web:         +
==> web:         +; The URL rewriter will look for URLs in a defined set of HTML tags.
==> web:         +; form/fieldset are special; if you include them here, the rewriter will
==> web:         +; add a hidden <input> field with the info which is otherwise appended
==> web:         +; to URLs.  If you want XHTML conformity, remove the form entry.
==> web:         +; Note that all valid entries require a "=", even if no value follows.
==> web:         +; Default Value: "a=href,area=href,frame=src,form=,fieldset="
==> web:         +; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
==> web:         +; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
==> web:         +; http://php.net/url-rewriter.tags
==> web:         +url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
==> web:         +
==> web:         +[MSSQL]
==> web:         +; Allow or prevent persistent links.
==> web:         +mssql.allow_persistent = On
==> web:         +
==> web:         +; Maximum number of persistent links.  -1 means no limit.
==> web:         +mssql.max_persistent = -1
==> web:         +
==> web:         +; Maximum number of links (persistent+non persistent).  -1 means no limit.
==> web:         +mssql.max_links = -1
==> web:         +
==> web:         +; Minimum error severity to display.
==> web:         +mssql.min_error_severity = 10
==> web:         +
==> web:         +; Minimum message severity to display.
==> web:         +mssql.min_message_severity = 10
==> web:         +
==> web:         +; Compatibility mode with old versions of PHP 3.0.
==> web:         +mssql.compatability_mode = Off
==> web:         +
==> web:         +; Connect timeout
==> web:         +;mssql.connect_timeout = 5
==> web:         +
==> web:         +; Query timeout
==> web:         +;mssql.timeout = 60
==> web:         +
==> web:         +; Valid range 0 - 2147483647.  Default = 4096.
==> web:         +;mssql.textlimit = 4096
==> web:         +
==> web:         +; Valid range 0 - 2147483647.  Default = 4096.
==> web:         +;mssql.textsize = 4096
==> web:         +
==> web:         +; Limits the number of records in each batch.  0 = all records in one batch.
==> web:         +;mssql.batchsize = 0
==> web:         +
==> web:         +; Specify how datetime and datetim4 columns are returned
==> web:         +; On => Returns data converted to SQL server settings
==> web:         +; Off => Returns values as YYYY-MM-DD hh:mm:ss
==> web:         +;mssql.datetimeconvert = On
==> web:         +
==> web:         +; Use NT authentication when connecting to the server
==> web:         +mssql.secure_connection = Off
==> web:         +
==> web:         +; Specify max number of processes. -1 = library default
==> web:         +; msdlib defaults to 25
==> web:         +; FreeTDS defaults to 4096
==> web:         +;mssql.max_procs = -1
==> web:         +
==> web:         +; Specify client character set.
==> web:         +; If empty or not set the client charset from freetds.comf is used
==> web:         +; This is only used when compiled with FreeTDS
==> web:         +;mssql.charset = "ISO-8859-1"
==> web:         +
==> web:         +[Assertion]
==> web:         +; Assert(expr); active by default.
==> web:         +; http://php.net/assert.active
==> web:         +;assert.active = On
==> web:         +
==> web:         +; Issue a PHP warning for each failed assertion.
==> web:         +; http://php.net/assert.warning
==> web:         +;assert.warning = On
==> web:         +
==> web:         +; Don't bail out by default.
==> web:         +; http://php.net/assert.bail
==> web:         +;assert.bail = Off
==> web:         +
==> web:         +; User-function to be called if an assertion fails.
==> web:         +; http://php.net/assert.callback
==> web:         +;assert.callback = 0
==> web:         +
==> web:         +; Eval the expression with current error_reporting().  Set to true if you want
==> web:         +; error_reporting(0) around the eval().
==> web:         +; http://php.net/assert.quiet-eval
==> web:         +;assert.quiet_eval = 0
==> web:         +
==> web:         +[COM]
==> web:         +; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
==> web:         +; http://php.net/com.typelib-file
==> web:         +;com.typelib_file =
==> web:         +
==> web:         +; allow Distributed-COM calls
==> web:         +; http://php.net/com.allow-dcom
==> web:         +;com.allow_dcom = true
==> web:         +
==> web:         +; autoregister constants of a components typlib on com_load()
==> web:         +; http://php.net/com.autoregister-typelib
==> web:         +;com.autoregister_typelib = true
==> web:         +
==> web:         +; register constants casesensitive
==> web:         +; http://php.net/com.autoregister-casesensitive
==> web:         +;com.autoregister_casesensitive = false
==> web:         +
==> web:         +; show warnings on duplicate constant registrations
==> web:         +; http://php.net/com.autoregister-verbose
==> web:         +;com.autoregister_verbose = true
==> web:         +
==> web:         +; The default character set code-page to use when passing strings to and from COM objects.
==> web:         +; Default: system ANSI code page
==> web:         +;com.code_page=
==> web:         +
==> web:         +[mbstring]
==> web:         +; language for internal character representation.
==> web:         +; http://php.net/mbstring.language
==> web:         +;mbstring.language = Japanese
==> web:         +
==> web:         +; internal/script encoding.
==> web:         +; Some encoding cannot work as internal encoding.
==> web:         +; (e.g. SJIS, BIG5, ISO-2022-*)
==> web:         +; http://php.net/mbstring.internal-encoding
==> web:         +;mbstring.internal_encoding = EUC-JP
==> web:         +
==> web:         +; http input encoding.
==> web:         +; http://php.net/mbstring.http-input
==> web:         +;mbstring.http_input = auto
==> web:         +
==> web:         +; http output encoding. mb_output_handler must be
==> web:         +; registered as output buffer to function
==> web:         +; http://php.net/mbstring.http-output
==> web:         +;mbstring.http_output = SJIS
==> web:         +
==> web:         +; enable automatic encoding translation according to
==> web:         +; mbstring.internal_encoding setting. Input chars are
==> web:         +; converted to internal encoding by setting this to On.
==> web:         +; Note: Do _not_ use automatic encoding translation for
==> web:         +;       portable libs/applications.
==> web:         +; http://php.net/mbstring.encoding-translation
==> web:         +;mbstring.encoding_translation = Off
==> web:         +
==> web:         +; automatic encoding detection order.
==> web:         +; auto means
==> web:         +; http://php.net/mbstring.detect-order
==> web:         +;mbstring.detect_order = auto
==> web:         +
==> web:         +; substitute_character used when character c
==> web: annot be converted
==> web:         +; one from another
==> web:         +; http://php.net/mbstring.substitute-character
==> web:         +;mbstring.substitute_character = none;
==> web:         +
==> web:         +; overload(replace) single byte functions by mbstring functions.
==> web:         +; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
==> web:         +; etc. Possible values are 0,1,2,4 or combination of them.
==> web:         +; For example, 7 for overload everything.
==> web:         +; 0: No overload
==> web:         +; 1: Overload mail() function
==> web:         +; 2: Overload str*() functions
==> web:         +; 4: Overload ereg*() functions
==> web:         +; http://php.net/mbstring.func-overload
==> web:         +;mbstring.func_overload = 0
==> web:         +
==> web:         +; enable strict encoding detection.
==> web:         +;mbstring.strict_detection = Off
==> web:         +
==> web:         +; This directive specifies the regex pattern of content types for which mb_output_handler()
==> web:         +; is activated.
==> web:         +; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
==> web:         +;mbstring.http_output_conv_mimetype=
==> web:         +
==> web:         +; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
==> web:         +; Default: ""
==> web:         +;mbstring.script_encoding=
==> web:         +
==> web:         +[gd]
==> web:         +; Tell the jpeg decode to ignore warnings and try to create
==> web:         +; a gd image. The warning will then be displayed as notices
==> web:         +; disabled by default
==> web:         +; http://php.net/gd.jpeg-ignore-warning
==> web:         +;gd.jpeg_ignore_warning = 0
==> web:         +
==> web:         +[exif]
==> web:         +; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
==> web:         +; With mbstring support this will automatically be converted into the encoding
==> web:         +; given by corresponding encode setting. When empty mbstring.internal_encoding
==> web:         +; is used. For the decode settings you can distinguish between motorola and
==> web:         +; intel byte order. A decode setting cannot be empty.
==> web:         +; http://php.net/exif.encode-unicode
==> web:         +;exif.encode_unicode = ISO-8859-15
==> web:         +
==> web:         +; http://php.net/exif.decode-unicode-motorola
==> web:         +;exif.decode_unicode_motorola = UCS-2BE
==> web:         +
==> web:         +; http://php.net/exif.decode-unicode-intel
==> web:         +;exif.decode_unicode_intel    = UCS-2LE
==> web:         +
==> web:         +; http://php.net/exif.encode-jis
==> web:         +;exif.encode_jis =
==> web:         +
==> web:         +; http://php.net/exif.decode-jis-motorola
==> web:         +;exif.decode_jis_motorola = JIS
==> web:         +
==> web:         +; http://php.net/exif.decode-jis-intel
==> web:         +;exif.decode_jis_intel    = JIS
==> web:         +
==> web:         +[Tidy]
==> web:         +; The path to a default tidy configuration file to use when using tidy
==> web:         +; http://php.net/tidy.default-config
==> web:         +;tidy.default_config = /usr/local/lib/php/default.tcfg
==> web:         +
==> web:         +; Should tidy clean and repair output automatically?
==> web:         +; WARNING: Do not use this option if you are generating non-html content
==> web:         +; such as dynamic images
==> web:         +; http://php.net/tidy.clean-output
==> web:         +tidy.clean_output = Off
==> web:         +
==> web:         +[soap]
==> web:         +; Enables or disables WSDL caching feature.
==> web:         +; http://php.net/soap.wsdl-cache-enabled
==> web:         +soap.wsdl_cache_enabled=1
==> web:         +
==> web:         +; Sets the directory name where SOAP extension will put cache files.
==> web:         +; http://php.net/soap.wsdl-cache-dir
==> web:         +soap.wsdl_cache_dir="/tmp"
==> web:         +
==> web:         +; (time to live) Sets the number of second while cached file will be used
==> web:         +; instead of original one.
==> web:         +; http://php.net/soap.wsdl-cache-ttl
==> web:         +soap.wsdl_cache_ttl=86400
==> web:         +
==> web:         +; Sets the size of the cache limit. (Max. number of WSDL files to cache)
==> web:         +soap.wsdl_cache_limit = 5
==> web:         +
==> web:         +[sysvshm]
==> web:         +; A default size of the shared memory segment
==> web:         +;sysvshm.init_mem = 10000
==> web:         +
==> web:         +[ldap]
==> web:         +; Sets the maximum number of open links or -1 for unlimited.
==> web:         +ldap.max_links = -1
==> web:         +
==> web:         +[mcrypt]
==> web:         +; For more information about mcrypt settings see http://php.net/mcrypt-module-open
==> web:         +
==> web:         +; Directory where to load mcrypt algorithms
==> web:         +; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
==> web:         +;mcrypt.algorithms_dir=
==> web:         +
==> web:         +; Directory where to load mcrypt modes
==> web:         +; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
==> web:         +;mcrypt.modes_dir=
==> web:         +
==> web:         +[dba]
==> web:         +;dba.default_handler=
==> web:         +
==> web:         +; Local Variables:
==> web:         +; tab-width: 4
==> web:         +; End:
==> web:         +[2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:38+00:00] INFO: template[/etc/php5/cli/php.ini] owner changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:38+00:00] INFO: template[/etc/php5/cli/php.ini] group changed to 0
==> web: [2015-09-14T22:14:38+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:38+00:00] INFO: template[/etc/php5/cli/php.ini] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'[2015-09-14T22:14:38+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web: Recipe: php::default
==> web:   * php_pear_channel[pear.php.net] action update[2015-09-14T22:14:38+00:00] INFO: Processing php_pear_channel[pear.php.net] action update (php::default line 25)
==> web: [2015-09-14T22:14:38+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web:  (up to date)
==> web:   * php_pear_channel[pecl.php.net] action update
==> web: [2015-09-14T22:14:40+00:00] INFO: Processing php_pear_channel[pecl.php.net] action update (php::default line 29)
==> web: [2015-09-14T22:14:40+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web:  (up to date)
==> web: Recipe: composer::install
==> web:   * log[[composer] phar (PHP archive) not supported] action write
==> web: [2015-09-14T22:14:40+00:00] INFO: Processing log[[composer] phar (PHP archive) not supported] action write (composer::install line 23)
==> web:  (skipped due to not_if)
==> web: [2015-09-14T22:14:40+00:00] DEBUG: Skipping log[[composer] phar (PHP archive) not supported] due to not_if command `php -m | grep 'Phar'`
==> web:   * directory[/var/chef/cache/composer] action create
==> web: [2015-09-14T22:14:40+00:00] INFO: Processing directory[/var/chef/cache/composer] action create (composer::install line 30)
==> web: [2015-09-14T22:14:40+00:00] INFO: directory[/var/chef/cache/composer] created directory /var/chef/cache/composer
==> web:
==> web:     - create new directory /var/chef/cache/composer
==> web: [2015-09-14T22:14:40+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:14:40+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:14:40+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:14:40+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * remote_file[/var/chef/cache/composer/composer.phar] action create
==> web: [2015-09-14T22:14:40+00:00] INFO: Processing remote_file[/var/chef/cache/composer/composer.phar] action create (composer::install line 36)
==> web: [2015-09-14T22:14:40+00:00] DEBUG: touching /var/chef/cache/composer/composer.phar to create it
==> web: [2015-09-14T22:14:40+00:00] INFO: remote_file[/var/chef/cache/composer/composer.phar] created file /var/chef/cache/composer/composer.phar
==> web:
==> web:     - create new file /var/chef/cache/composer/composer.phar
==> web: [2015-09-14T22:14:40+00:00] DEBUG: remote_file[/var/chef/cache/composer/composer.phar] checking for changes
==> web: [2015-09-14T22:14:40+00:00] DEBUG: Cache control headers: {}
==> web: [2015-09-14T22:14:40+00:00] DEBUG: Initiating GET to http://getcomposer.org/composer.phar
==> web: [2015-09-14T22:14:40+00:00] DEBUG: ---- HTTP Request Header Data: ----
==> web: [2015-09-14T22:14:40+00:00] DEBUG: Accept-Encoding: gzip;q=1.0,deflate;q=0.6,identity;q=0.3
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Streaming download from http://getcomposer.org/composer.phar to tempfile /tmp/chef-rest20150914-1761-19uwyh8
==> web: [2015-09-14T22:14:41+00:00] DEBUG: decompressing gzip stream
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- HTTP Status and Header Data: ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: HTTP 1.1 200 OK
==> web: [2015-09-14T22:14:41+00:00] DEBUG: server: nginx
==> web: [2015-09-14T22:14:41+00:00] DEBUG: date: Mon, 14 Sep 2015 22:16:33 GMT
==> web: [2015-09-14T22:14:41+00:00] DEBUG: content-type: application/octet-stream
==> web: [2015-09-14T22:14:41+00:00] DEBUG: last-modified: Mon, 14 Sep 2015 22:00:06 GMT
==> web: [2015-09-14T22:14:41+00:00] DEBUG: transfer-encoding: chunked
==> web: [2015-09-14T22:14:41+00:00] DEBUG: connection: close
==> web: [2015-09-14T22:14:41+00:00] DEBUG: vary: Accept-Encoding
==> web: [2015-09-14T22:14:41+00:00] DEBUG: etag: W/"55f74366-115a6f"
==> web: [2015-09-14T22:14:41+00:00] DEBUG: content-encoding: gzip
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- End HTTP Status/Header Data ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: calculating checksum of /tmp/chef-rest20150914-1761-19uwyh8 to compare with
==> web: [2015-09-14T22:14:41+00:00] DEBUG: reading modes from /var/chef/cache/composer/composer.phar file
==> web: [2015-09-14T22:14:41+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rest20150914-1761-19uwyh8
==> web: [2015-09-14T22:14:41+00:00] DEBUG: moving temporary file /tmp/chef-rest20150914-1761-19uwyh8 into place at /var/chef/cache/composer/composer.phar
==> web: [2015-09-14T22:14:41+00:00] INFO: remote_file[/var/chef/cache/composer/composer.phar] updated file contents /var/chef/cache/composer/composer.phar
==> web:
==> web:     - update content in file /var/chef/cache/composer/composer.phar from none to 2c7454
==> web:         (new content is binary, diff output suppressed)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] INFO: remote_file[/var/chef/cache/composer/composer.phar] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web: [2015-09-14T22:14:41+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * link[/usr/local/bin/composer] action create
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing link[/usr/local/bin/composer] action create (composer::install line 51)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: link[/usr/local/bin/composer] created symbolic link from /var/chef/cache/composer/composer.phar -> /usr/local/bin/composer
==> web: [2015-09-14T22:14:41+00:00] INFO: link[/usr/local/bin/composer] created
==> web:
==> web:     - create symlink at /usr/local/bin/composer to /var/chef/cache/composer/composer.phar
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: Recipe: my_company::php-fpm
==> web:   * ruby_block[copy-fpm-init.d-script] action run
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing ruby_block[copy-fpm-init.d-script] action run (my_company::php-fpm line 3)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:41+00:00] INFO: ruby_block[copy-fpm-init.d-script] called
==> web:
==> web:     - execute the ruby block copy-fpm-init.d-script
==> web:   * template[/usr/local/etc/php-fpm.conf] action create
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing template[/usr/local/etc/php-fpm.conf] action create (my_company::php-fpm line 17)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: touching /usr/local/etc/php-fpm.conf to create it
==> web: [2015-09-14T22:14:41+00:00] INFO: template[/usr/local/etc/php-fpm.conf] created file /usr/local/etc/php-fpm.conf
==> web:
==> web:     - create new file /usr/local/etc/php-fpm.conf
==> web: [2015-09-14T22:14:41+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1awx45k to compare with
==> web: [2015-09-14T22:14:41+00:00] DEBUG: running: diff -u /usr/local/etc/php-fpm.conf /tmp/chef-rendered-template20150914-1761-1awx45k
==> web: [2015-09-14T22:14:41+00:00] DEBUG: reading modes from /usr/local/etc/php-fpm.conf file
==> web: [2015-09-14T22:14:41+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1awx45k
==> web: [2015-09-14T22:14:41+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1awx45k into place at /usr/local/etc/php-fpm.conf
==> web: [2015-09-14T22:14:41+00:00] INFO: template[/usr/local/etc/php-fpm.conf] updated file contents /usr/local/etc/php-fpm.conf
==> web:
==> web:     - update content in file /usr/local/etc/php-fpm.conf from none to 5d36ea
==> web:         --- /usr/local/etc/php-fpm.conf	2015-09-14 22:14:41.532496517 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1awx45k	2015-09-14 22:14:41.532496517 +0000
==> web:         @@ -1 +1,282 @@
==> web:         +; Start a new pool named 'www'.
==> web:         +; the variable $pool can we used in any directive and will be replaced by the
==> web:         +; pool name ('www' here)
==> web:         +[www]
==> web:         +
==> web:         +; Per pool prefix
==> web:         +; It only applies on the following directives:
==> web:         +; - 'slowlog'
==> web:         +; - 'listen' (unixsocket)
==> web:         +; - 'chroot'
==> web:         +; - 'chdir'
==> web:         +; - 'php_values'
==> web:         +; - 'php_admin_values'
==> web:         +; When not set, the global prefix (or /usr) applies instead.
==> web:         +; Note: This directive can also be relative to the global prefix.
==> web:         +; Default Value: none
==> web:         +;prefix = /path/to/pools/$pool
==> web:         +
==> web:         +; Unix user/group of processes
==> web:         +; Note: The user is mandatory. If the group is not set, the default user's group
==> web:         +;       will be used.
==> web:         +user  = www-data
==> web:         +group = www-data
==> web:         +
==> web:         +; The address on which to accept FastCGI requests.
==> web:         +; Valid syntaxes are:
==> web:         +;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
==> web:         +;                            a specific port;
==> web:         +;   'port'                 - to listen on a TCP socket to all addresses on a
==> web:         +;                            specific port;
==> web:         +;   '/path/to/unix/socket' - to listen on a unix socket.
==> web:         +; Note: This value is mandatory.
==> web:         +;listen = 127.0.0.1:9000
==> web:         +
==> web:         +listen = 127.0.0.1:9000
==> web:         +
==> web:
==> web:         +; Set listen(2) backlog. A value of '-1' means unlimited.
==> web:         +; Default Value: 128 (-1 on FreeBSD and OpenBSD)
==> web:         +;listen.backlog = -1
==> web:         +
==> web:         +
==> web:         +; Set permissions for unix socket, if one is used. In Linux, read/write
==> web:         +; permissions must be set in order to allow connections from a web server. Many
==> web:         +; BSD-derived systems allow connections regardless of permissions.
==> web:         +; Default Values: user and group are set as the running user
==> web:         +;                 mode is set to 0666
==> web:         +listen.owner = www-data
==> web:         +listen.group = www-data
==> web:         +listen.mode  = 0666
==> web:
==> web:         +
==> web:         +; List of ipv4 addresses of FastCGI clients which are allowed to connect.
==> web:         +; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
==> web:         +; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
==> web:         +; must be separated by a comma. If this value is left blank, connections will be
==> web:         +; accepted from any ip address.
==> web:         +; Default Value: any
==> web:         +;listen.allowed_clients = 127.0.0.1
==> web:         +
==> web:         +
==> web:         +; Choose how the process manager will control the number of child processes.
==> web:         +; Possible Values:
==> web:         +;   static  - a fixed number (pm.max_children) of child processes;
==> web:         +;   dynamic - the number of child processes are set dynamically based on the
==> web:         +;             following directives. With this process management, there will be
==> web:         +;             always at least 1 children.
==> web:         +;             pm.max_children      - the maximum number of children that can
==> web:         +;                                    be alive at the same time.
==> web:         +;             pm.start_servers     - the number of children created on startup.
==> web:         +;             pm.min_spare_servers - the minimum number of children in 'idle'
==> web:         +;                                    state (waiting to process). If the number
==> web:         +;                                    of 'idle' processes is less than this
==> web:         +;                                    number then some children will be created.
==> web:         +;             pm.max_spare_servers - the maximum number of children in 'idle'
==> web:         +;                                    state (waiting to process). If the number
==> web:         +;                                    of 'idle' processes is greater than this
==> web:         +;                                    number then some children will be killed.
==> web:         +;  ondemand - no children are created at startup. Children will be forked when
==> web:         +;             new requests will connect. The following parameter are used:
==> web:         +;             pm.max_children           - the maximum number of children that
==> web:
==> web:         +;                                         can be alive at the same time.
==> web:         +;             pm.process_idle_timeout   - The number of seconds after which
==> web:         +;                                         an idle process will be killed.
==> web:         +; Note: This value is mandatory.
==> web:         +pm = dynamic
==> web:         +
==> web:         +; The number of child processes to be created when pm is set to 'static' and the
==> web:         +; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
==> web:         +; This value sets the limit on the number of simultaneous requests that will be
==> web:         +; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
==> web:         +; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
==> web:         +; CGI. The below defaults are based on a server without much resources. Don't
==> web:         +; forget to tweak pm.* to fit your needs.
==> web:         +; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
==> web:         +; Note: This value is mandatory.
==> web:         +pm.max_children = 8
==> web:         +
==> web:         +; The number of child processes created on startup.
==> web:         +; Note: Used only when pm is set to 'dynamic'
==> web:         +; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
==> web:         +pm.start_servers = 4
==> web:         +
==> web:         +; The desired minimum number of idle server processes.
==> web:         +; Note: Used only when pm is set to 'dynamic'
==> web:         +; Note: Mandatory when pm is set to 'dynamic'
==> web:         +pm.min_spare_servers = 2
==> web:         +
==> web:         +; The desired maximum number of idle server processes.
==> web:         +; Note: Used only when pm is set to 'dynamic'
==> web:         +; Note: Mandatory when pm is set to 'dynamic'
==> web:         +pm.max_spare_servers = 4
==> web:         +
==> web:         +; The number of seconds after which an idle process will be killed.
==> web:         +; Note: Used only when pm is set to 'ondemand'
==> web:         +; Default Value: 10s
==> web:         +;pm.process_idle_timeout = 10s;
==> web:         +
==> web:         +
==> web:         +; The number of requests each child process should execute before respawning.
==> web:         +; This can be useful to work around memory leaks in 3rd party libraries. For
==> web:         +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
==> web:         +; Default Value: 0
==> web:         +;pm.max_requests = 500
==> web:         +
==> web:         +
==> web:         +; The URI to view the FPM status page. If this value is not set, no URI will be
==> web:         +; recognized as a status page.
==> web:         +; By default the status page output is formatted as text/plain. Passing either
==> web:         +; 'html', 'xml' or 'json' in the query string will return the corresponding
==> web:         +; output syntax. Example:
==> web:         +;   http://www.foo.bar/status
==> web:         +;   http://www.foo.bar/status?json
==> web:         +;   http://www.foo.bar/status?html
==> web:         +;   http://www.foo.bar/status?xml
==> web:         +;
==> web:         +; By default the status page only outputs short status. Passing 'full' in the
==> web:         +; query string will also return status for each pool process.
==> web:         +; Example:
==> web:         +;   http://www.foo.bar/status?full
==> web:         +;   http://www.foo.bar/status?json&full
==> web:         +;   http://www.foo.bar/status?html&full
==> web:         +;   http://www.foo.bar/status?xml&full
==> web:
==> web:         +;
==> web:         +; Note: There is a real-time FPM status monitoring sample web page available
==> web:         +;       It's available in: ${prefix}/share/fpm/status.html
==> web:         +;
==> web:         +; Note: The value must start with a leading slash (/). The value can be
==> web:         +;       anything, but it may not be a good idea to use the .php extension or it
==> web:         +;       may conflict with a real PHP file.
==> web:         +; Default Value: not set
==> web:         +;pm.status_path = /status
==> web:         +
==> web:         +
==> web:         +; The ping URI to call the monitoring page of FPM. If this value is not set, no
==> web:         +; URI will be recognized as a ping page. This could be used to test from outside
==> web:         +; that FPM is alive and responding, or to
==> web:         +; - create a graph of FPM availability (rrd or such);
==> web:         +; - remove a server from a group if it is not responding (load balancing);
==> web:         +; - trigger alerts for the operating team (24/7).
==> web:         +; Note: The value must start with a leading slash (/). The value can be
==> web:         +;       anything, but it may not be a good idea to use the .php extension or it
==> web:         +;       may conflict with a real PHP file.
==> web:         +; Default Value: not set
==> web:         +;ping.path = /ping
==> web:         +
==> web:         +
==> web:         +; This directive may be used to customize the response of a ping request. The
==> web:         +; response is formatted as text/plain with a 200 response code.
==> web:         +; Default Value: pong
==> web:         +;ping.response = pong
==> web:         +
==> web:         +
==> web:         +; The access log file
==> web:         +; Default: not set
==> web:         +;access.log = log/$pool.access.log
==> web:         +
==> web:         +
==> web:         +; The access log format.
==> web:         +; Default: "%R - %u %t \"%m %r\" %s"
==> web:         +;access.format = %R - %u %t "%m %r%Q%q" %s %f %{mili}d %{kilo}M %C%%
==> web:         +
==> web:         +
==> web:         +; The log file for slow requests
==> web:         +; Default Value: not set
==> web:         +; Note: slowlog is mandatory if request_slowlog_timeout is set
==> web:         +;slowlog = log/$pool.log.slow
==> web:         +
==> web:         +
==> web:         +; The timeout for serving a single request after which a PHP backtrace will be
==> web:         +; dumped to the 'slowlog' file. A value of '0s' means 'off'.
==> web:         +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
==> web:         +; Default Value: 0
==> web:         +;request_slowlog_timeout = 0
==> web:         +
==> web:         +
==> web:         +; The timeout for serving a single request after which the worker process will
==> web:
==> web:         +; be killed. This option should be used when the 'max_execution_time' ini option
==> web:         +; does not stop script execution for some reason. A value of '0' means 'off'.
==> web:         +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
==> web:         +; Default Value: 0
==> web:         +;request_terminate_timeout = 0
==> web:         +
==> web:         +
==> web:         +; Set open file descriptor rlimit.
==> web:         +; Default Value: system defined value
==> web:         +;rlimit_files = 1024
==> web:         +
==> web:         +
==> web:         +; Set max core size rlimit.
==> web:         +; Possible Values: 'unlimited' or an integer greater or equal to 0
==> web:         +; Default Value: system defined value
==> web:         +;rlimit_core = 0
==> web:         +
==> web:         +
==> web:         +; Chroot to this directory at the start. This value must be defined as an
==> web:         +; absolute path. When this value is not set, chroot is not used.
==> web:         +; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
==> web:         +; of its subdirectories. If the pool prefix is not set, the global prefix
==> web:
==> web:         +; will be used instead.
==> web:         +; Note: chrooting is a great security feature and should be used whenever
==> web:         +;       possible. However, all PHP paths will be relative to the chroot
==> web:         +;       (error_log, sessions.save_path, ...).
==> web:         +; Default Value: not set
==> web:         +;chroot =
==> web:         +
==> web:         +
==> web:         +; Chdir to this directory at the start.
==> web:         +; Note: relative path can be used.
==> web:         +; Default Value: current directory or / when chroot
==> web:         +chdir = /
==> web:         +
==> web:         +; Redirect worker stdout and stderr into main error log. If not set, stdout and
==> web:         +; stderr will be redirected to /dev/null according to FastCGI specs.
==> web:         +; Note: on highloaded environement, this can cause some delay in the page
==> web:         +; process time (several ms).
==> web:         +; Default Value: no
==> web:         +;catch_workers_output = yes
==> web:         +
==> web:         +
==> web:         +; Limits the extensions of the main script FPM will allow to parse. This can
==> web:         +; prevent configuration mistakes on the web server side. You should only limit
==> web:         +; FPM to .php extensions to prevent malicious users to use other extensions to
==> web:         +; exectute php code.
==> web:         +; Note: set an empty value to allow all extensions.
==> web:         +; Default Value: .php
==> web:         +;security.limit_extensions = .php .php3 .php4 .php5
==> web:         +
==> web:         +
==> web:         +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
==> web:         +; the current environment.
==> web:         +; Default Value: clean env
==> web:         +;env[HOSTNAME] = $HOSTNAME
==> web:         +;env[PATH] = /usr/local/bin:/usr/bin:/bin
==> web:         +;env[TMP] = /tmp
==> web:         +;env[TMPDIR] = /tmp
==> web:         +;env[TEMP] = /tmp
==> web:         +
==> web:         +
==> web:         +; Additional php.ini defines, specific to this pool of workers. These settings
==> web:
==> web:         +; overwrite the values previously defined in the php.ini. The directives are the
==> web:         +; same as the PHP SAPI:
==> web:         +;   php_value/php_flag             - you can set classic ini defines which can
==> web:         +;                                    be overwritten from PHP call 'ini_set'.
==> web:         +;   php_admin_value/php_admin_flag - these directives won't be overwritten by
==> web:         +;                                     PHP call 'ini_set'
==> web:         +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
==> web:         +
==> web:         +; Defining 'extension' will load the corresponding shared extension from
==> web:
==> web:         +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
==> web:         +; overwrite previously defined php.ini values, but will append the new value
==> web:         +; instead.
==> web:         +
==> web:         +; Note: path INI options can be relative and will be expanded with the prefix
==> web:         +; (pool, global or /usr)
==> web:         +
==> web:         +; Default Value: nothing is defined by default except the values in php.ini and
==> web:         +;                specified at startup with the -d argument
==> web:         +;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
==> web:         +;php_flag[display_errors] = off
==> web:         +;php_admin_value[error_log] = /var/log/fpm-php.www.log
==> web:         +;php_admin_flag[log_errors] = on
==> web:         +;php_admin_value[memory_limit] = 32M
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:41+00:00] INFO: template[/usr/local/etc/php-fpm.conf] owner changed to 0
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:41+00:00] INFO: template[/usr/local/etc/php-fpm.conf] group changed to 0
==> web: [2015-09-14T22:14:41+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:41+00:00] INFO: template[/usr/local/etc/php-fpm.conf] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:41+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * service[php-fpm] action enable
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing service[php-fpm] action enable (my_company::php-fpm line 24)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] falling back to process table inspection
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] attempting to match 'php-fpm' (/php-fpm/) against process list
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] running: false
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Executing /usr/sbin/update-rc.d -f php-fpm remove
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- Begin output of /usr/sbin/update-rc.d -f php-fpm remove ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: STDOUT:  Removing any system startup links for /etc/init.d/php-fpm ...
==> web: [2015-09-14T22:14:41+00:00] DEBUG: STDERR:
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- End output of /usr/sbin/update-rc.d -f php-fpm remove ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Ran /usr/sbin/update-rc.d -f php-fpm remove returned 0
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Executing /usr/sbin/update-rc.d php-fpm defaults
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- Begin output of /usr/sbin/update-rc.d php-fpm defaults ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: STDOUT:  Adding system startup for /etc/init.d/php-fpm ...
==> web:    /etc/rc0.d/K20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc1.d/K20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc6.d/K20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc2.d/S20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc3.d/S20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc4.d/S20php-fpm -> ../init.d/php-fpm
==> web:    /etc/rc5.d/S20php-fpm -> ../init.d/php-fpm
==> web: [2015-09-14T22:14:41+00:00] DEBUG: STDERR:
==> web: [2015-09-14T22:14:41+00:00] DEBUG: ---- End output of /usr/sbin/update-rc.d php-fpm defaults ----
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Ran /usr/sbin/update-rc.d php-fpm defaults returned 0
==> web: [2015-09-14T22:14:41+00:00] INFO: service[php-fpm] enabled
==> web:
==> web:     - enable service service[php-fpm]
==> web:
==> web:   * service[php-fpm] action start
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing service[php-fpm] action start (my_company::php-fpm line 24)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] falling back to process table inspection
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] attempting to match 'php-fpm' (/php-fpm/) against process list
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] running: false
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:14:41+00:00] DEBUG: service[php-fpm] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:14:41+00:00] INFO: service[php-fpm] started
==> web:
==> web:     - start service service[php-fpm]
==> web: Recipe: my_company::php
==> web:   * php_pear_channel[pecl.php.net] action update
==> web: [2015-09-14T22:14:41+00:00] INFO: Processing php_pear_channel[pecl.php.net] action update (my_company::php line 18)
==> web: [2015-09-14T22:14:41+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web:  (up to date)
==> web:   * php_pear[memcache] action install
==> web: [2015-09-14T22:14:42+00:00] INFO: Processing php_pear[memcache] action install (my_company::php line 22)
==> web: [2015-09-14T22:14:42+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:42+00:00] DEBUG: php_pear[memcache] smells like a pecl...installing package in Pecl mode.
==> web: [2015-09-14T22:14:43+00:00] DEBUG: php_pear[memcache]: Installed version:  Candidate version: 3.0.8
==> web: [2015-09-14T22:14:43+00:00] INFO: Installing php_pear[memcache] version 3.0.8
==> web:
==> web:     - install package php_pear[memcache] 3.0.8
==> web: [2015-09-14T22:14:48+00:00] INFO: php_pear[memcache] not queuing delayed action restart on service[php-fpm] (delayed), as it's already been queued
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * template[/etc/php5/conf.d/memcache.ini] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing template[/etc/php5/conf.d/memcache.ini] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/php/providers/pear.rb line 216)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: touching /etc/php5/conf.d/memcache.ini to create it
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/memcache.ini] created file /etc/php5/conf.d/memcache.ini
==> web:
==> web:     - create new file /etc/php5/conf.d/memcache.ini
==> web: [2015-09-14T22:14:48+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-r7qhqc to compare with
==> web: [2015-09-14T22:14:48+00:00] DEBUG: running: diff -u /etc/php5/conf.d/memcache.ini /tmp/chef-rendered-template20150914-1761-r7qhqc
==> web: [2015-09-14T22:14:48+00:00] DEBUG: reading modes from /etc/php5/conf.d/memcache.ini file
==> web: [2015-09-14T22:14:48+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-r7qhqc
==> web: [2015-09-14T22:14:48+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-r7qhqc into place at /etc/php5/conf.d/memcache.ini
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/memcache.ini] updated file contents /etc/php5/conf.d/memcache.ini
==> web:
==> web:     - update content in file /etc/php5/conf.d/memcache.ini from none to 356820
==> web:         --- /etc/php5/conf.d/memcache.ini	2015-09-14 22:14:48.564470301 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-r7qhqc	2015-09-14 22:14:48.564470301 +0000
==> web:         @@ -1 +1,3 @@
==> web:         +; configuration for php memcache module
==> web:         +extension=memcache.so
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/memcache.ini] owner changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/memcache.ini] group changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/memcache.ini] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:48+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: my_company::php
==> web:   * file[/var/log/opcache.log] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing file[/var/log/opcache.log] action create (my_company::php line 27)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: touching /var/log/opcache.log to create it
==> web: [2015-09-14T22:14:48+00:00] INFO: file[/var/log/opcache.log] created file /var/log/opcache.log
==> web:
==> web:     - create new file /var/log/opcache.log
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] INFO: file[/var/log/opcache.log] owner changed to 33
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] INFO: file[/var/log/opcache.log] group changed to 33
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] INFO: file[/var/log/opcache.log] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'www-data'
==> web:     - change group from '' to 'www-data'
==> web: [2015-09-14T22:14:48+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * ruby_block[create_opcache_ini_file] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing ruby_block[create_opcache_ini_file] action create (my_company::php line 34)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * template[/etc/php5/conf.d/opcache.ini] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing template[/etc/php5/conf.d/opcache.ini] action create (dynamically defined)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: touching /etc/php5/conf.d/opcache.ini to create it
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/opcache.ini] created file /etc/php5/conf.d/opcache.ini
==> web:
==> web:     - create new file /etc/php5/conf.d/opcache.ini
==> web: [2015-09-14T22:14:48+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-11f1lkp to compare with
==> web: [2015-09-14T22:14:48+00:00] DEBUG: running: diff -u /etc/php5/conf.d/opcache.ini /tmp/chef-rendered-template20150914-1761-11f1lkp
==> web: [2015-09-14T22:14:48+00:00] DEBUG: reading modes from /etc/php5/conf.d/opcache.ini file
==> web: [2015-09-14T22:14:48+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-11f1lkp
==> web: [2015-09-14T22:14:48+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-11f1lkp into place at /etc/php5/conf.d/opcache.ini
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/opcache.ini] updated file contents /etc/php5/conf.d/opcache.ini
==> web:
==> web:     - update content in file /etc/php5/conf.d/opcache.ini from none to 7ea722
==> web:
==> web:         --- /etc/php5/conf.d/opcache.ini	2015-09-14 22:14:48.604470153 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-11f1lkp	2015-09-14 22:14:48.608470138 +0000
==> web:         @@ -1 +1,7 @@
==> web:         +; configuration for php opcache module
==> web:         +zend_extension=/usr/local/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
==> web:         +opcache.memory_consumption="512"
==> web:         +opcache.max_accelerated_files="65000"
==> web:         +opcache.enable_file_override="true"
==> web:         +opcache.error_log="/var/log/opcache.log"
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/opcache.ini] owner changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/opcache.ini] group changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/conf.d/opcache.ini] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:48+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:14:48+00:00] INFO: ruby_block[create_opcache_ini_file] called
==> web:
==> web:     - execute the ruby block create_opcache_ini_file
==> web: Recipe: my_company::php
==> web:   * template[/etc/php5/cli/php.ini] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing template[/etc/php5/cli/php.ini] action create (my_company::php line 59)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: template[/etc/php5/cli/php.ini] checksumming file at /etc/php5/cli/php.ini.
==> web: [2015-09-14T22:14:48+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1y25osn to compare with 3273af67e47d6c24ed82b844151384cb2ff6059a4bccbd46b67e3b5cc12bef8c
==> web: [2015-09-14T22:14:48+00:00] DEBUG: running: diff -u /etc/php5/cli/php.ini /tmp/chef-rendered-template20150914-1761-1y25osn
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/cli/php.ini] backed up to /var/chef/backup/etc/php5/cli/php.ini.chef-20150914221448.743746
==> web: [2015-09-14T22:14:48+00:00] DEBUG: reading modes from /etc/php5/cli/php.ini file
==> web: [2015-09-14T22:14:48+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1y25osn
==> web: [2015-09-14T22:14:48+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1y25osn into place at /etc/php5/cli/php.ini
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/cli/php.ini] updated file contents /etc/php5/cli/php.ini
==> web:
==> web:     - update content in file /etc/php5/cli/php.ini from 3273af to c42af3
==> web:
==> web:         --- /etc/php5/cli/php.ini	2015-09-14 22:14:38.328508644 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1y25osn	2015-09-14 22:14:48.616470108 +0000
==> web:         @@ -317,7 +317,7 @@
==> web:          ; When floats & doubles are serialized store serialize_precision significant
==> web:          ; digits after the floating point. The default value ensures that when floats
==> web:          ; are decoded with unserialize, the data will remain the same.
==> web:         -serialize_precision = 100
==> web:         +serialize_precision = 17
==> web:
==> web:          ; This directive allows you to enable and disable warnings which PHP will issue
==> web:          ; if you pass a value by reference at function call time. Passing values by
==> web:         @@ -382,7 +382,7 @@
==> web:          ; It receives a comma-delimited list of function names. This directive is
==> web:          ; *NOT* affected by whether Safe Mode is turned On or Off.
==> web:          ; http://php.net/disable-functions
==> web:         -disable_functions =
==> web:         +;disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,
==> web:
==> web:          ; This directive allows you to disable certain classes for security reasons.
==> web:          ; It receives a comma-delimited list of class names. This directive is
==> web:         @@ -413,12 +413,18 @@
==> web:          ; http://php.net/realpath-cache-size
==> web:          ;realpath_cache_size = 16k
==> web:
==> web:         +
==> web:          ; Duration of time, in seconds for which to cache realpath information for a given
==> web:          ; file or directory. For systems with rarely changing files, consider increasing this
==> web:          ; value.
==> web:          ; http://php.net/realpath-cache-ttl
==> web:          ;realpath_cache_ttl = 120
==> web:
==> web:         +
==> web:         +; Enables or disables the circular reference collector.
==> web:         +; http://php.net/zend.enable-gc
==> web:         +zend.enable_gc = On
==> web:         +
==> web:          ;;;;;;;;;;;;;;;;;
==> web:
==> web:          ; Miscellaneous ;
==> web:          ;;;;;;;;;;;;;;;;;
==> web:         @@ -453,9 +459,12 @@
==> web:          ; http://php.net/max-input-nesting-level
==> web:          ;max_input_nesting_level = 64
==> web:
==> web:         +; How many GET/POST/COOKIE input variables may be accepted
==> web:         +; max_input_vars = 1000
==> web:         +
==> web:          ; Maximum amount of memory a script may consume (128MB)
==> web:          ; http://php.net/memory-limit
==> web:         -memory_limit = -1
==> web:         +memory_limit = 256M
==> web:
==> web:          ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
==> web:
==> web:          ; Error handling and logging ;
==> web:         @@ -511,7 +520,7 @@
==> web:          ; Development Value: E_ALL | E_STRICT
==> web:          ; Production Value: E_ALL & ~E_DEPRECATED
==> web:          ; http://php.net/error-reporting
==> web:         -error_reporting = E_ALL & ~E_DEPRECATED
==> web:         +  error_reporting = E_ALL & ~E_STRICT & ~E_DEPRECATED
==> web:
==> web:          ; This directive controls whether or not and where PHP will output errors,
==> web:          ; notices and warnings too. Error output is very useful during development, but
==> web:         @@ -528,7 +537,7 @@
==> web:          ; Development Value: On
==> web:          ; Production Value: Off
==> web:          ; http://php.net/display-errors
==> web:         -display_errors = Off
==> web:         +display_errors = On
==> web:
==> web:          ; The display of errors which occur during PHP's startup sequence are handled
==> web:          ; separately from display_errors. PHP's default behavior is to suppress those
==> web:         @@ -621,13 +630,13 @@
==> web:          ; this setting blank.
==> web:          ; http://php.net/error-prepend-string
==> web:          ; Example:
==> web:         -;error_prepend_string = "<font color=#ff0000>"
==> web:         +;error_prepend_string = "<span style='color: #ff0000'>"
==> web:
==> web:          ; String to output after an error message. PHP's default behavior is to leave
==> web:          ; this setting blank.
==> web:          ; http://php.net/error-append-string
==> web:          ; Example:
==> web:         -;error_append_string = "</font>"
==> web:         +;error_append_string = "</span>"
==> web:
==> web:          ; Log errors to specified file. PHP's default behavior is to leave this value
==> web:          ; empty.
==> web:         @@ -637,6 +646,11 @@
==> web:          ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
==> web:          ;error_log = syslog
==> web:
==> web:         +;windows.show_crt_warning
==> web:         +; Default value: 0
==> web:         +; Development value: 0
==> web:         +; Production value: 0
==> web:         +
==> web:          ;;;;;;;;;;;;;;;;;
==> web:          ; Data Handling ;
==> web:
==> web:          ;;;;;;;;;;;;;;;;;
==> web:         @@ -725,7 +739,7 @@
==> web:
==> web:          ; Maximum size of POST data that PHP will accept.
==> web:          ; http://php.net/post-max-size
==> web:         -post_max_size = 8M
==> web:         +post_max_size = 20M
==> web:
==> web:          ; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
==> web:          ; escape any character sequences in GET, POST, COOKIE and ENV data which might
==> web:         @@ -876,8 +890,9 @@
==> web:
==> web:          ; Maximum allowed size for uploaded files.
==> web:          ; http://php.net/upload-max-filesize
==> web:         -upload_max_filesize = 2M
==> web:
==> web:         +upload_max_filesize = 20M
==> web:         +
==> web:          ; Maximum number of files that can be uploaded via a single request
==> web:          max_file_uploads = 20
==> web:
==> web:         @@ -937,7 +952,6 @@
==> web:          ;
==> web:          ; If you only provide the name of the extension, PHP will look for it in its
==> web:          ; default extension directory.
==> web:         -;
==> web:
==> web:          ;;;;;;;;;;;;;;;;;;;
==> web:          ; Module Settings ;
==> web:         @@ -946,7 +960,8 @@
==> web:          [Date]
==> web:          ; Defines the default timezone used by the date functions
==> web:          ; http://php.net/date.timezone
==> web:         -;date.timezone =
==> web:         +; date.timezone =
==> web:
==> web:         +  date.timezone = America/New_York
==> web:
==> web:          ; http://php.net/date.default-latitude
==> web:          ;date.default_latitude = 31.7667
==> web:         @@ -1013,7 +1028,7 @@
==> web:          ; Default socket name for local MySQL connects.  If empty, uses the built-in
==> web:          ; MySQL defaults.
==> web:          ; http://php.net/pdo_mysql.default-socket
==> web:         -pdo_mysql.default_socket=
==> web:         +pdo_mysql.default_socket=/var/run/mysqld/mysqld.sock
==> web:
==> web:          [Phar]
==> web:          ; http://php.net/phar.readonly
==> web:         @@ -1054,7 +1069,8 @@
==> web:          ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
==> web:          mail.add_x_header = On
==> web:
==> web:         -; Log all mail() calls including the full path of the script, line #, to address and headers
==> web:         +; The path to a log file that will log all mail() calls. Log entries include
==> web:         +; the full path of the script, line number, To address and headers.
==> web:          ;mail.log =
==> web:
==> web:          [SQL]
==> web:         @@ -1247,12 +1263,12 @@
==> web:          mysqli.reconnect = Off
==> web:
==> web:          [mysqlnd]
==> web:         -; Enable / Disable collection of general statstics by mysqlnd which can be
==> web:         +; Enable / Disable collection of general statistics by mysqlnd which can be
==> web:          ; used to tune and monitor MySQL operations.
==> web:          ; http://php.net/mysqlnd.collect_statistics
==> web:          mysqlnd.collect_statistics = On
==> web:
==> web:         -; Enable / Disable collection of memory usage statstics by mysqlnd which can be
==> web:         +; Enable / Disable collection of memory usage statistics by mysqlnd which can be
==> web:          ; used to tune and monitor MySQL operations.
==> web:          ; http://php.net/mysqlnd.collect_memory_statistics
==> web:          mysqlnd.collect_memory_statistics = Off
==> web:         @@ -1319,7 +1335,7 @@
==> web:          ; http://php.net/oci8.old-oci-close-semantics
==> web:          ;oci8.old_oci_close_semantics = Off
==> web:
==> web:         -[PostgresSQL]
==> web:         +[PostgreSQL]
==> web:          ; Allow or prevent persistent links.
==> web:          ; http://php.net/pgsql.allow-persistent
==> web:          pgsql.allow_persistent = On
==> web:         @@ -1342,7 +1358,7 @@
==> web:          ; http://php.net/pgsql.ignore-notice
==> web:          pgsql.ignore_notice = 0
==> web:
==> web:         -; Log PostgreSQL backends Noitce message or not.
==> web:         +; Log PostgreSQL backends Notice message or not.
==> web:          ; Unless pgsql.ignore_notice=0, module cannot log notice message.
==> web:          ; http://php.net/pgsql.log-notice
==> web:          pgsql.log_notice = 0
==> web:         @@ -1481,7 +1497,7 @@
==> web:          ; Development Value: 1
==> web:          ; Production Value: 1
==> web:          ; http://php.net/session.gc-probability
==> web:         -session.gc_probability = 1
==> web:         +session.gc_probability = 0
==> web:
==> web:          ; Defines the probability that the 'garbage collection' process is started on every
==> web:          ; session initialization. The probability is calculated by using the following equation:
==> web:         @@ -1508,7 +1524,7 @@
==> web:          ;       collection through a shell script, cron entry, or some other method.
==> web:          ;       For example, the following script would is the equivalent of
==> web:          ;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
==> web:         -;          cd /path/to/sessions; find -cmin +24 | xargs rm
==> web:         +;          find /path/to/sessions -cmin +24 | xargs rm
==> web:
==> web:          ; PHP 4.2 and less have an undocumented feature/bug that allows you to
==> web:
==> web:          ; to initialize a session variable in the global scope, even when register_globals
==> web:         @@ -1547,12 +1563,11 @@
==> web:
==> web:          ; Specified here to create the session id.
==> web:          ; http://php.net/session.entropy-file
==> web:         +; On systems that don't have /dev/urandom /dev/arandom can be used
==> web:         +; On windows, setting the entropy_length setting will activate the
==> web:
==> web:         +; Windows random source (using the CryptoAPI)
==> web:          ;session.entropy_file = /dev/urandom
==> web:         -session.entropy_file =
==> web:
==> web:         -; http://php.net/session.entropy-length
==> web:         -;session.entropy_length = 16
==> web:         -
==> web:          ; Set to {nocache,private,public,} to determine HTTP caching aspects
==> web:          ; or leave this empty to avoid sending anti-caching headers.
==> web:          ; http://php.net/session.cache-limiter
==> web:         @@ -1579,7 +1594,7 @@
==> web:          ;   0  (MD5 128 bits)
==> web:          ;   1  (SHA-1 160 bits)
==> web:          ; This option may also be set to the name of any hash function supported by
==> web:         -; the hash extension. A list of available hashes is returned by the hash_alogs()
==> web:         +; the hash extension. A list of available hashes is returned by the hash_algos()
==> web:          ; function.
==> web:          ; http://php.net/session.hash-function
==> web:          session.hash_function = 0
==> web:         @@ -1655,7 +1670,7 @@
==> web:          ;mssql.max_procs = -1
==> web:
==> web:          ; Specify client character set.
==> web:         -; If empty or not set the client charset from freetds.comf is used
==> web:         +; If empty or not set the client charset from freetds.conf is used
==> web:          ; This is only used when compiled with FreeTDS
==> web:          ;mssql.charset = "ISO-8859-1"
==> web:
==> web:
==> web:         @@ -1848,8 +1863,13 @@
==> web:          [dba]
==> web:          ;dba.default_handler=
==> web:
==> web:         +[xsl]
==> web:         +; Write operations from within XSLT are disabled by default.
==> web:
==> web:         +; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK |Â XSL_SECPREF_WRITE_FILE = 44
==> web:         +; Set it to 0 to allow all operations
==> web:         +;xsl.security_prefs = 44
==> web:         +
==> web:          ; Local Variables:
==> web:          ; tab-width: 4
==> web:          ; End:
==> web:         -
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:14:48+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/php5/cli/php.ini] not queuing delayed action restart on service[php-fpm] (delayed), as it's already been queued
==> web: Recipe: curl::default
==> web:   * package[curl] action upgrade
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing package[curl] action upgrade (curl::default line 20)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:48+00:00] DEBUG: package[curl] checking package status for curl
==> web: [2015-09-14T22:14:48+00:00] DEBUG: package[curl] current version is 7.22.0-3ubuntu4.14
==> web: [2015-09-14T22:14:48+00:00] DEBUG: package[curl] candidate version is 7.22.0-3ubuntu4.14
==> web: [2015-09-14T22:14:48+00:00] DEBUG: package[curl] is at the latest version - nothing to do
==> web:  (up to date)
==> web: Recipe: nginx::ohai_plugin
==> web:   * ohai[reload_nginx] action nothing
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing ohai[reload_nginx] action nothing (nginx::ohai_plugin line 22)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Skipping ohai[reload_nginx] due to action :nothing
==> web:   * template[/etc/chef/ohai_plugins/nginx.rb] action create
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing template[/etc/chef/ohai_plugins/nginx.rb] action create (nginx::ohai_plugin line 27)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: touching /etc/chef/ohai_plugins/nginx.rb to create it
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] created file /etc/chef/ohai_plugins/nginx.rb
==> web:
==> web:     - create new file /etc/chef/ohai_plugins/nginx.rb
==> web: [2015-09-14T22:14:48+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-127ooq3 to compare with
==> web: [2015-09-14T22:14:48+00:00] DEBUG: running: diff -u /etc/chef/ohai_plugins/nginx.rb /tmp/chef-rendered-template20150914-1761-127ooq3
==> web: [2015-09-14T22:14:48+00:00] DEBUG: reading modes from /etc/chef/ohai_plugins/nginx.rb file
==> web: [2015-09-14T22:14:48+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-127ooq3
==> web: [2015-09-14T22:14:48+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-127ooq3 into place at /etc/chef/ohai_plugins/nginx.rb
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] updated file contents /etc/chef/ohai_plugins/nginx.rb
==> web:
==> web:     - update content in file /etc/chef/ohai_plugins/nginx.rb from none to 9f7e82
==> web:         --- /etc/chef/ohai_plugins/nginx.rb	2015-09-14 22:14:48.924468972 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-127ooq3	2015-09-14 22:14:48.924468972 +0000
==> web:         @@ -1 +1,67 @@
==> web:
==> web:         +#
==> web:         +# Author:: Jamie Winsor (<jamie@vialstudios.com>)
==> web:         +#
==> web:         +# Copyright 2012, Riot Games
==> web:         +#
==> web:         +# Licensed under the Apache License, Version 2.0 (the "License");
==> web:
==> web:         +# you may not use this file except in compliance with the License.
==> web:         +# You may obtain a copy of the License at
==> web:         +#
==> web:         +#     http://www.apache.org/licenses/LICENSE-2.0
==> web:         +#
==> web:         +# Unless required by applicable law or agreed to in writing, software
==> web:         +# distributed under the License is distributed on an "AS IS" BASIS,
==> web:         +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
==> web:         +# See the License for the specific language governing permissions and
==> web:         +# limitations under the License.
==> web:         +#
==> web:         +
==> web:         +provides "nginx"
==> web:         +provides "nginx/version"
==> web:         +provides "nginx/configure_arguments"
==> web:         +provides "nginx/prefix"
==> web:         +provides "nginx/conf_path"
==> web:         +
==> web:         +def parse_flags(flags)
==> web:         +  prefix = nil
==> web:         +  conf_path = nil
==> web:         +
==> web:         +  flags.each do |flag|
==> web:         +    case flag
==> web:         +    when /^--prefix=(.+)$/
==> web:         +      prefix = $1
==> web:         +    when /^--conf-path=(.+)$/
==> web:         +      conf_path = $1
==> web:         +    end
==> web:         +  end
==> web:         +
==> web:         +  [ prefix, conf_path ]
==> web:         +end
==> web:         +
==> web:         +nginx Mash.new unless nginx
==> web:         +nginx[:version]             = nil unless nginx[:version]
==> web:         +nginx[:configure_arguments] = Array.new unless nginx[:configure_arguments]
==> web:         +nginx[:prefix]              = nil unless nginx[:prefix]
==> web:
==> web:         +nginx[:conf_path]           = nil unless nginx[:conf_path]
==> web:         +
==> web:         +status, stdout, stderr = run_command(:no_status_check => true, :command => "/usr/sbin/nginx -V")
==> web:         +
==> web:         +if status == 0
==> web:         +  stderr.split("\n").each do |line|
==> web:         +    case line
==> web:         +    when /^configure arguments:(.+)/
==> web:         +      # This could be better: I'm splitting on configure arguments which removes them and also
==> web:         +      # adds a blank string at index 0 of the array. This is why we drop index 0 and map to
==> web:         +      # add the '--' prefix back to the configure argument.
==> web:         +      nginx[:configure_arguments] = $1.split(/\s--/).drop(1).map { |ca| "--#{ca}" }
==> web:         +
==> web:         +      prefix, conf_path = parse_flags(nginx[:configure_arguments])
==> web:         +
==> web:         +      nginx[:prefix] = prefix
==> web:         +      nginx[:conf_path] = conf_path
==> web:         +    when /^nginx version: nginx\/(\d+\.\d+\.\d+)/
==> web:         +      nginx[:version] = $1
==> web:         +    end
==> web:         +  end
==> web:         +end
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] owner changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] group changed to 0
==> web: [2015-09-14T22:14:48+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:48+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:14:48+00:00] INFO: template[/etc/chef/ohai_plugins/nginx.rb] sending reload action to ohai[reload_nginx] (immediate)
==> web:   * ohai[reload_nginx] action reload
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing ohai[reload_nginx] action reload (nginx::ohai_plugin line 22)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:48+00:00] INFO: ohai[reload_nginx] reloaded
==> web:
==> web:     - re-run ohai and merge results into node attributes
==> web: Recipe: ohai::default
==> web:   * remote_directory[/etc/chef/ohai_plugins] action nothing
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing remote_directory[/etc/chef/ohai_plugins] action nothing (ohai::default line 33)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Skipping remote_directory[/etc/chef/ohai_plugins] due to action :nothing
==> web:   * ohai[custom_plugins] action nothing
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing ohai[custom_plugins] action nothing (ohai::default line 46)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Skipping ohai[custom_plugins] due to action :nothing
==> web: Recipe: nginx::package
==> web:   * package[nginx] action install
==> web: [2015-09-14T22:14:48+00:00] INFO: Processing package[nginx] action install (nginx::package line 39)
==> web: [2015-09-14T22:14:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:48+00:00] DEBUG: package[nginx] checking package status for nginx
==> web: [2015-09-14T22:14:49+00:00] DEBUG: package[nginx] current version is nil
==> web: [2015-09-14T22:14:49+00:00] DEBUG: package[nginx] candidate version is 1.1.19-1ubuntu0.8
==> web:
==> web:     - install version 1.1.19-1ubuntu0.8 of package nginx
==> web: [2015-09-14T22:14:51+00:00] INFO: package[nginx] sending reload action to ohai[reload_nginx] (immediate)
==> web: Recipe: nginx::ohai_plugin
==> web:   * ohai[reload_nginx] action reload
==> web: [2015-09-14T22:14:51+00:00] INFO: Processing ohai[reload_nginx] action reload (nginx::ohai_plugin line 22)
==> web: [2015-09-14T22:14:51+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:52+00:00] INFO: ohai[reload_nginx] reloaded
==> web:
==> web:     - re-run ohai and merge results into node attributes
==> web: Recipe: nginx::package
==> web:   * service[nginx] action enable
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing service[nginx] action enable (nginx::package line 43)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] supports status, running
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] already enabled - nothing to do
==> web:  (up to date)
==> web: Recipe: nginx::commons_dir
==> web:   * directory[/etc/nginx] action create[2015-09-14T22:14:52+00:00] INFO: Processing directory[/etc/nginx] action create (nginx::commons_dir line 22)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * directory[/var/log/nginx] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing directory[/var/log/nginx] action create (nginx::commons_dir line 29)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:14:52+00:00] INFO: directory[/var/log/nginx] owner changed to 33
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web:
==> web:     - change owner from 'root' to 'www-data'
==> web: [2015-09-14T22:14:52+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/var/run] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing directory[/var/run] action create (nginx::commons_dir line 36)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * directory[/etc/nginx/sites-available] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing directory[/etc/nginx/sites-available] action create (nginx::commons_dir line 44)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * directory[/etc/nginx/sites-enabled] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing directory[/etc/nginx/sites-enabled] action create (nginx::commons_dir line 44)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * directory[/etc/nginx/conf.d] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing directory[/etc/nginx/conf.d] action create (nginx::commons_dir line 44)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web: Recipe: nginx::commons_script
==> web:   * template[/usr/sbin/nxensite] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing template[/usr/sbin/nxensite] action create (nginx::commons_script line 23)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: touching /usr/sbin/nxensite to create it
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxensite] created file /usr/sbin/nxensite
==> web:
==> web:     - create new file /usr/sbin/nxensite
==> web: [2015-09-14T22:14:52+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-3mh8v to compare with
==> web: [2015-09-14T22:14:52+00:00] DEBUG: running: diff -u /usr/sbin/nxensite /tmp/chef-rendered-template20150914-1761-3mh8v
==> web: [2015-09-14T22:14:52+00:00] DEBUG: reading modes from /usr/sbin/nxensite file
==> web: [2015-09-14T22:14:52+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-3mh8v
==> web: [2015-09-14T22:14:52+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-3mh8v into place at /usr/sbin/nxensite
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxensite] updated file contents /usr/sbin/nxensite
==> web:
==> web:     - update content in file /usr/sbin/nxensite from none to fa46fb
==> web:
==> web:         --- /usr/sbin/nxensite	2015-09-14 22:14:52.076457407 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-3mh8v	2015-09-14 22:14:52.080457393 +0000
==> web:         @@ -1 +1,39 @@
==> web:         +#!/bin/sh -e
==> web:         +
==> web:         +SYSCONFDIR='/etc/nginx'
==> web:         +
==> web:         +if [ -z $1 ]; then
==> web:         +        echo "Which site would you like to enable?"
==> web:         +        echo -n "Your choices are: "
==> web:         +        ls $SYSCONFDIR/sites-available/* | \
==> web:         +        sed -e "s,$SYSCONFDIR/sites-available/,,g" | xargs echo
==> web:         +        echo -n "Site name? "
==> web:         +        read SITENAME
==> web:         +else
==> web:         +        SITENAME=$1
==> web:         +fi
==> web:         +
==> web:         +if [ $SITENAME = "default" ]; then
==> web:         +        PRIORITY="000"
==> web:         +fi
==> web:         +
==> web:         +if [ -e $SYSCONFDIR/sites-enabled/$SITENAME -o \
==> web:         +     -e $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME" ]; then
==> web:         +        echo "This site is already enabled!"
==> web:         +        exit 0
==> web:         +fi
==> web:         +
==> web:         +if ! [ -e $SYSCONFDIR/sites-available/$SITENAME ]; then
==> web:
==> web:         +        echo "This site does not exist!"
==> web:         +        exit 1
==> web:         +fi
==> web:         +
==> web:         +if [ $SITENAME = "default" ]; then
==> web:         +        ln -sf $SYSCONFDIR/sites-available/$SITENAME \
==> web:         +               $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME"
==> web:         +else
==> web:         +        ln -sf $SYSCONFDIR/sites-available/$SITENAME $SYSCONFDIR/sites-enabled/$SITENAME
==> web:         +fi
==> web:
==> web:         +
==> web:         +echo "Site $SITENAME installed; reload nginx to enable."
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxensite] owner changed to 0
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxensite] group changed to 0
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxensite] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:52+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/usr/sbin/nxdissite] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing template[/usr/sbin/nxdissite] action create (nginx::commons_script line 23)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: touching /usr/sbin/nxdissite to create it
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxdissite] created file /usr/sbin/nxdissite
==> web:
==> web:     - create new file /usr/sbin/nxdissite
==> web: [2015-09-14T22:14:52+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1b01ebh to compare with
==> web: [2015-09-14T22:14:52+00:00] DEBUG: running: diff -u /usr/sbin/nxdissite /tmp/chef-rendered-template20150914-1761-1b01ebh
==> web: [2015-09-14T22:14:52+00:00] DEBUG: reading modes from /usr/sbin/nxdissite file
==> web: [2015-09-14T22:14:52+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1b01ebh
==> web: [2015-09-14T22:14:52+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1b01ebh into place at /usr/sbin/nxdissite
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxdissite] updated file contents /usr/sbin/nxdissite
==> web:
==> web:     - update content in file /usr/sbin/nxdissite from none to cc16ec
==> web:
==> web:         --- /usr/sbin/nxdissite	2015-09-14 22:14:52.088457363 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1b01ebh	2015-09-14 22:14:52.088457363 +0000
==> web:         @@ -1 +1,30 @@
==> web:         +#!/bin/sh -e
==> web:         +
==> web:         +SYSCONFDIR='/etc/nginx'
==> web:         +
==> web:         +if [ -z $1 ]; then
==> web:         +        echo "Which site would you like to disable?"
==> web:         +        echo -n "Your choices are: "
==> web:         +        ls $SYSCONFDIR/sites-enabled/* | \
==> web:
==> web:         +        sed -e "s,$SYSCONFDIR/sites-enabled/,,g" | xargs echo
==> web:         +        echo -n "Site name? "
==> web:         +        read SITENAME
==> web:         +else
==> web:
==> web:         +        SITENAME=$1
==> web:         +fi
==> web:         +
==> web:         +if [ $SITENAME = "default" ]; then
==> web:         +        PRIORITY="000"
==> web:         +fi
==> web:         +
==> web:         +if ! [ -e $SYSCONFDIR/sites-enabled/$SITENAME -o \
==> web:         +       -e $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME" ]; then
==> web:         +        echo "This site is already disabled, or does not exist!"
==> web:         +        exit 1
==> web:         +fi
==> web:         +
==> web:         +if ! rm $SYSCONFDIR/sites-enabled/$SITENAME 2>/dev/null; then
==> web:         +        rm -f $SYSCONFDIR/sites-enabled/"$PRIORITY"-"$SITENAME"
==> web:         +fi
==> web:         +echo "Site $SITENAME disabled; reload nginx to disable."
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxdissite] owner changed to 0
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxdissite] group changed to 0
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/usr/sbin/nxdissite] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:52+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: nginx::commons_conf
==> web:   * template[nginx.conf] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing template[nginx.conf] action create (nginx::commons_conf line 22)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: template[nginx.conf] checksumming file at /etc/nginx/nginx.conf.
==> web: [2015-09-14T22:14:52+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-169fayi to compare with 38154b3e657e6d53edf0ebc77060a8b7e905cbde19dda37298ec30138cda83f5
==> web: [2015-09-14T22:14:52+00:00] DEBUG: running: diff -u /etc/nginx/nginx.conf /tmp/chef-rendered-template20150914-1761-169fayi
==> web: [2015-09-14T22:14:52+00:00] INFO: template[nginx.conf] backed up to /var/chef/backup/etc/nginx/nginx.conf.chef-20150914221452.101387
==> web: [2015-09-14T22:14:52+00:00] DEBUG: reading modes from /etc/nginx/nginx.conf file
==> web: [2015-09-14T22:14:52+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-169fayi
==> web: [2015-09-14T22:14:52+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-169fayi into place at /etc/nginx/nginx.conf
==> web: [2015-09-14T22:14:52+00:00] INFO: template[nginx.conf] updated file contents /etc/nginx/nginx.conf
==> web:
==> web:     - update content in file /etc/nginx/nginx.conf from 38154b to 1c38f0
==> web:         --- /etc/nginx/nginx.conf	2012-03-29 02:50:24.000000000 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-169fayi	2015-09-14 22:14:52.096457334 +0000
==> web:         @@ -1,96 +1,40 @@
==> web:          user www-data;
==> web:         -worker_processes 4;
==> web:         -pid /var/run/nginx.pid;
==> web:         +worker_processes  2;
==> web:
==> web:         +error_log  /var/log/nginx/error.log;
==> web:         +pid        /var/run/nginx.pid;
==> web:         +
==> web:          events {
==> web:         -	worker_connections 768;
==> web:         -	# multi_accept on;
==> web:         +  worker_connections  1024;
==> web:          }
==> web:
==> web:          http {
==> web:
==> web:         -	##
==> web:         -	# Basic Settings
==> web:         -	##
==> web:         +  include       /etc/nginx/mime.types;
==> web:         +  default_type  application/octet-stream;
==> web:
==> web:         -	sendfile on;
==> web:         -	tcp_nopush on;
==> web:         -	tcp_nodelay on;
==> web:         -	keepalive_timeout 65;
==> web:         -	types_hash_max_size 2048;
==> web:         -	# server_tokens off;
==> web:         +  access_log	/var/log/nginx/access.log;
==> web:
==> web:         -	# server_names_hash_bucket_size 64;
==> web:         -	# server_name_in_redirect off;
==> web:         +  sendfile on;
==> web:         +  tcp_nopush on;
==> web:         +  tcp_nodelay on;
==> web:
==> web:         -	include /etc/nginx/mime.types;
==> web:
==> web:         -	default_type application/octet-stream;
==> web:         +  keepalive_timeout  65;
==> web:
==> web:         -	##
==> web:         -	# Logging Settings
==> web:         -	##
==> web:         +  gzip  on;
==> web:         +  gzip_http_version 1.0;
==> web:         +  gzip_comp_level 2;
==> web:         +  gzip_proxied any;
==> web:         +  gzip_vary off;
==> web:
==> web:         +  gzip_types text/plain text/css application/x-javascript text/xml application/xml application/rss+xml application/atom+xml text/javascript application/javascript application/json text/mathml;
==> web:         +  gzip_min_length  1000;
==> web:         +  gzip_disable     "MSIE [1-6]\.";
==> web:
==> web:         -	access_log /var/log/nginx/access.log;
==> web:         -	error_log /var/log/nginx/error.log;
==> web:         +  server_names_hash_bucket_size 64;
==> web:         +  types_hash_max_size 2048;
==> web:         +  types_hash_bucket_size 64;
==> web:
==> web:         -	##
==> web:         -	# Gzip Settings
==> web:         -	##
==> web:         -
==> web:         -	gzip on;
==> web:         -	gzip_disable "msie6";
==> web:         -
==> web:         -	# gzip_vary on;
==> web:         -	# gzip_proxied any;
==> web:         -	# gzip_comp_level 6;
==> web:         -	# gzip_buffers 16 8k;
==> web:         -	# gzip_http_version 1.1;
==> web:         -	# gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript;
==> web:         -
==> web:         -	##
==> web:         -	# nginx-naxsi config
==> web:         -	##
==> web:         -	# Uncomment it if you installed nginx-naxsi
==> web:         -	##
==> web:         -
==> web:         -	#include /etc/nginx/naxsi_core.rules;
==> web:         -
==> web:         -	##
==> web:         -	# nginx-passenger config
==> web:         -	##
==> web:         -	# Uncomment it if you installed nginx-passenger
==> web:         -	##
==> web:         -
==> web:         -	#passenger_root /usr;
==> web:         -	#passenger_ruby /usr/bin/ruby;
==> web:
==> web:         -
==> web:         -	##
==> web:         -	# Virtual Host Configs
==> web:         -	##
==> web:         -
==> web:         -	include /etc/nginx/conf.d/*.conf;
==> web:         -	include /etc/nginx/sites-enabled/*;
==> web:         +  include /etc/nginx/conf.d/*.conf;
==> web:         +  include /etc/nginx/sites-enabled/*;
==> web:
==> web:          }
==> web:
==> web:         -
==> web:         -
==> web:         -#mail {
==> web:         -#	# See sample authentication script at:
==> web:
==> web:         -#	# http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript
==> web:         -#
==> web:         -#	# auth_http localhost/auth.php;
==> web:         -#	# pop3_capabilities "TOP" "USER";
==> web:         -#	# imap_capabilities "IMAP4rev1" "UIDPLUS";
==> web:         -#
==> web:         -#	server {
==> web:         -#		listen     localhost:110;
==> web:         -#		protocol   pop3;
==> web:         -#		proxy      on;
==> web:         -#	}
==> web:         -#
==> web:         -#	server {
==> web:         -#		listen     localhost:143;
==> web:         -#		protocol   imap;
==> web:         -#		proxy      on;
==> web:         -#	}
==> web:         -#}
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/nginx/sites-available/default] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing template[/etc/nginx/sites-available/default] action create (nginx::commons_conf line 26)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: template[/etc/nginx/sites-available/default] checksumming file at /etc/nginx/sites-available/default.
==> web: [2015-09-14T22:14:52+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-nu1cd1 to compare with 7fe53b64491055e75d7bced81da83851cf9b3ca5188102c65aef1acaec5bb504
==> web: [2015-09-14T22:14:52+00:00] DEBUG: running: diff -u /etc/nginx/sites-available/default /tmp/chef-rendered-template20150914-1761-nu1cd1
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/etc/nginx/sites-available/default] backed up to /var/chef/backup/etc/nginx/sites-available/default.chef-20150914221452.110211
==> web: [2015-09-14T22:14:52+00:00] DEBUG: reading modes from /etc/nginx/sites-available/default file
==> web: [2015-09-14T22:14:52+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-nu1cd1
==> web: [2015-09-14T22:14:52+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-nu1cd1 into place at /etc/nginx/sites-available/default
==> web: [2015-09-14T22:14:52+00:00] INFO: template[/etc/nginx/sites-available/default] updated file contents /etc/nginx/sites-available/default
==> web:
==> web:     - update content in file /etc/nginx/sites-available/default from 7fe53b to af8453
==> web:
==> web:         --- /etc/nginx/sites-available/default	2012-03-29 02:50:24.000000000 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-nu1cd1	2015-09-14 22:14:52.104457305 +0000
==> web:         @@ -1,121 +1,17 @@
==> web:
==> web:         -# You may add here your
==> web:         -# server {
==> web:         -#	...
==> web:         -# }
==> web:         -# statements for each of your virtual hosts to this file
==> web:         -
==> web:         -##
==> web:         -# You should look at the following URL's in order to grasp a solid understanding
==> web:         -# of Nginx configuration files in order to fully unleash the power of Nginx.
==> web:         -# http://wiki.nginx.org/Pitfalls
==> web:         -# http://wiki.nginx.org/QuickStart
==> web:         -# http://wiki.nginx.org/Configuration
==> web:         +# Generated by Chef for precise64 (nginx version: 1.1.19)
==> web:          #
==> web:         -# Generally, you will want to move this file somewhere, and start with a clean
==> web:         -# file but keep this around for reference. Or just disable in sites-enabled.
==> web:         +# Local modifications will be overwritten.
==> web:          #
==> web:         -# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
==> web:         -##
==> web:         -
==> web:          server {
==> web:         -	#listen   80; ## listen for ipv4; this line is default and implied
==> web:         -	#listen   [::]:80 default ipv6only=on; ## listen for ipv6
==> web:         +  listen   80;
==> web:         +  server_name precise64;
==> web:
==> web:         -	root /usr/share/nginx/www;
==> web:         -	index index.html index.htm;
==> web:         +  access_log /var/log/nginx/default-access.log;
==> web:         +  error_log  /var/log/nginx/default-error.log;
==> web:
==> web:         -	# Make site accessible from http://localhost/
==> web:
==> web:         -	server_name localhost;
==> web:         -
==> web:         -	location / {
==> web:         -		# First attempt to serve request as file, then
==> web:         -		# as directory, then fall back to index.html
==> web:         -		try_files $uri $uri/ /index.html;
==> web:         -		# Uncomment to enable naxsi on this location
==> web:         -		# include /etc/nginx/naxsi.rules
==> web:         -	}
==> web:         -
==> web:         -	location /doc/ {
==> web:         -		alias /usr/share/doc/;
==> web:         -		autoindex on;
==> web:         -		allow 127.0.0.1;
==> web:         -		deny all;
==> web:         -	}
==> web:         -
==> web:         -	# Only for nginx-naxsi : process denied requests
==> web:         -	#location /RequestDenied {
==> web:
==> web:         -		# For example, return an error code
==> web:         -		#return 418;
==> web:         -	#}
==> web:
==> web:         -
==> web:         -	#error_page 404 /404.html;
==> web:         -
==> web:
==> web:         -	# redirect server error pages to the static page /50x.html
==> web:         -	#
==> web:         -	#error_page 500 502 503 504 /50x.html;
==> web:         -	#location = /50x.html {
==> web:         -	#	root /usr/share/nginx/www;
==> web:         -	#}
==> web:         -
==> web:         -	# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
==> web:         -	#
==> web:         -	#location ~ \.php$ {
==> web:         -	#	fastcgi_split_path_info ^(.+\.php)(/.+)$;
==> web:         -	#	# NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini
==> web:         -	#
==> web:         -	#	# With php5-cgi alone:
==> web:         -	#	fastcgi_pass 127.0.0.1:9000;
==> web:         -	#	# With php5-fpm:
==> web:         -	#	fastcgi_pass unix:/var/run/php5-fpm.sock;
==> web:         -	#	fastcgi_index index.php;
==> web:         -	#	include fastcgi_params;
==> web:         -	#}
==> web:         -
==> web:         -	# deny access to .htaccess files, if Apache's document root
==> web:         -	# concurs with nginx's one
==> web:         -	#
==> web:         -	#location ~ /\.ht {
==> web:         -	#	deny all;
==> web:         -	#}
==> web:         +  location / {
==> web:         +    root /var/www/nginx-default;
==> web:         +    index index.html index.htm;
==> web:         +  }
==> web:
==> web:          }
==> web:         -
==> web:         -
==> web:         -# another virtual host using mix of IP-, name-, and port-based configuration
==> web:         -#
==> web:         -#server {
==> web:         -#	listen 8000;
==> web:         -#	listen somename:8080;
==> web:         -#	server_name somename alias another.alias;
==> web:         -#	root html;
==> web:         -#	index index.html index.htm;
==> web:         -#
==> web:         -#	location / {
==> web:         -#		try_files $uri $uri/ /index.html;
==> web:         -#	}
==> web:         -#}
==> web:         -
==> web:         -
==> web:         -# HTTPS server
==> web:         -#
==> web:         -#server {
==> web:         -#	listen 443;
==> web:         -#	server_name localhost;
==> web:         -#
==> web:         -#	root html;
==> web:         -#	index index.html index.htm;
==> web:         -#
==> web:         -#	ssl on;
==> web:         -#	ssl_certificate cert.pem;
==> web:         -#	ssl_certificate_key cert.key;
==> web:         -#
==> web:         -#	ssl_session_timeout 5m;
==> web:         -#
==> web:         -#	ssl_protocols SSLv3 TLSv1;
==> web:         -#	ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP;
==> web:         -#	ssl_prefer_server_ciphers on;
==> web:         -#
==> web:
==> web:         -#	location / {
==> web:         -#		try_files $uri $uri/ /index.html;
==> web:         -#	}
==> web:         -#}
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:14:52+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:14:52+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * execute[nxensite default] action run
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing execute[nxensite default] action run (nginx::commons_conf line 37)
==> web:  (skipped due to not_if)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Skipping execute[nxensite default] due to not_if ruby block
==> web: Recipe: nginx::default
==> web:   * service[nginx] action start
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing service[nginx] action start (nginx::default line 24)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] supports status, running
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:14:52+00:00] DEBUG: service[nginx] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:14:52+00:00] INFO: service[nginx] started
==> web:
==> web:     - start service service[nginx]
==> web: Recipe: my_company::data_cleanup
==> web:   * execute[innodb_cleanup_ibdata0] action run
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing execute[innodb_cleanup_ibdata0] action run (my_company::data_cleanup line 4)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Skipping execute[innodb_cleanup_ibdata0] due to only_if ruby block
==> web:   * execute[innodb_cleanup_ibdata1] action run[2015-09-14T22:14:52+00:00] INFO: Processing execute[innodb_cleanup_ibdata1] action run (my_company::data_cleanup line 4)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Skipping execute[innodb_cleanup_ibdata1] due to only_if ruby block
==> web:   * execute[innodb_cleanup_ib_logfile0] action run[2015-09-14T22:14:52+00:00] INFO: Processing execute[innodb_cleanup_ib_logfile0] action run (my_company::data_cleanup line 4)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Skipping execute[innodb_cleanup_ib_logfile0] due to only_if ruby block
==> web:   * execute[innodb_cleanup_ib_logfile1] action run
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing execute[innodb_cleanup_ib_logfile1] action run (my_company::data_cleanup line 4)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Skipping execute[innodb_cleanup_ib_logfile1] due to only_if ruby block
==> web: Recipe: mysql::server
==> web:   * mysql_service[default] action create
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing mysql_service[default] action create (mysql::server line 20)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web:
==> web:     - ubuntu pattern
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * package[debconf-utils] action install
==> web: [2015-09-14T22:14:52+00:00] INFO: Processing package[debconf-utils] action install (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 24)
==> web: [2015-09-14T22:14:52+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:52+00:00] DEBUG: package[debconf-utils] checking package status for debconf-utils
==> web: [2015-09-14T22:14:52+00:00] DEBUG: package[debconf-utils] current version is nil
==> web: [2015-09-14T22:14:52+00:00] DEBUG: package[debconf-utils] candidate version is 1.5.42ubuntu1
==> web:
==> web:     - install version 1.5.42ubuntu1 of package debconf-utils
==> web:   * directory[/var/cache/local/preseeding] action create
==> web: [2015-09-14T22:14:54+00:00] INFO: Processing directory[/var/cache/local/preseeding] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 28)
==> web: [2015-09-14T22:14:54+00:00] INFO: directory[/var/cache/local/preseeding] created directory /var/cache/local/preseeding
==> web:
==> web:     - create new directory /var/cache/local/preseeding
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:54+00:00] INFO: directory[/var/cache/local/preseeding] owner changed to 0
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:54+00:00] INFO: directory[/var/cache/local/preseeding] group changed to 0
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] INFO: directory[/var/cache/local/preseeding] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'[2015-09-14T22:14:54+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/var/cache/local/preseeding/mysql-server.seed] action create
==> web: [2015-09-14T22:14:54+00:00] INFO: Processing template[/var/cache/local/preseeding/mysql-server.seed] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 36)
==> web: [2015-09-14T22:14:54+00:00] DEBUG: touching /var/cache/local/preseeding/mysql-server.seed to create it
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] created file /var/cache/local/preseeding/mysql-server.seed
==> web:
==> web:     - create new file /var/cache/local/preseeding/mysql-server.seed
==> web: [2015-09-14T22:14:54+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1lqwux7 to compare with
==> web: [2015-09-14T22:14:54+00:00] DEBUG: running: diff -u /var/cache/local/preseeding/mysql-server.seed /tmp/chef-rendered-template20150914-1761-1lqwux7
==> web: [2015-09-14T22:14:54+00:00] DEBUG: reading modes from /var/cache/local/preseeding/mysql-server.seed file
==> web: [2015-09-14T22:14:54+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1lqwux7
==> web: [2015-09-14T22:14:54+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1lqwux7 into place at /var/cache/local/preseeding/mysql-server.seed
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] updated file contents /var/cache/local/preseeding/mysql-server.seed
==> web:
==> web:     - update content in file /var/cache/local/preseeding/mysql-server.seed from none to 0a0a26
==> web:         --- /var/cache/local/preseeding/mysql-server.seed	2015-09-14 22:14:54.476448674 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1lqwux7	2015-09-14 22:14:54.480448659 +0000
==> web:         @@ -1 +1,11 @@
==> web:         +mysql-server-5.5        mysql-server/root_password_again        select
==> web:         +mysql-server-5.5        mysql-server/root_password      select
==> web:         +mysql-server-5.5        mysql-server-5.5/really_downgrade       boolean false
==> web:         +mysql-server-5.5        mysql-server-5.5/need_sarge_compat      boolean false
==> web:         +mysql-server-5.5        mysql-server-5.5/start_on_boot  boolean false
==> web:         +mysql-server-5.5        mysql-server/error_setting_password     boolean false
==> web:         +mysql-server-5.5        mysql-server-5.5/nis_warning    note
==> web:         +mysql-server-5.5        mysql-server-5.5/postrm_remove_databases        boolean false
==> web:         +mysql-server-5.5        mysql-server/password_mismatch  boolean false
==> web:         +mysql-server-5.5        mysql-server-5.5/need_sarge_compat_done boolean true
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] owner changed to 0
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] group changed to 0
==> web: [2015-09-14T22:14:54+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] mode changed to 600
==> web:
==> web:     - change mode from '' to '0600'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:14:54+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:14:54+00:00] INFO: template[/var/cache/local/preseeding/mysql-server.seed] sending run action to execute[preseed mysql-server] (immediate)
==> web:   * execute[preseed mysql-server] action run
==> web: [2015-09-14T22:14:54+00:00] INFO: Processing execute[preseed mysql-server] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 47)
==> web: [2015-09-14T22:14:54+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:54+00:00] INFO: execute[preseed mysql-server] ran successfully
==> web:
==> web:     - execute /usr/bin/debconf-set-selections /var/cache/local/preseeding/mysql-server.seed
==> web:   * execute[preseed mysql-server] action nothing[2015-09-14T22:14:54+00:00] INFO: Processing execute[preseed mysql-server] action nothing (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 47)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:14:54+00:00] DEBUG: Skipping execute[preseed mysql-server] due to action :nothing
==> web:   * package[mysql-server-5.5] action install
==> web: [2015-09-14T22:14:54+00:00] INFO: Processing package[mysql-server-5.5] action install (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 54)
==> web: [2015-09-14T22:14:54+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:14:54+00:00] DEBUG: package[mysql-server-5.5] checking package status for mysql-server-5.5
==> web: [2015-09-14T22:14:54+00:00] DEBUG: package[mysql-server-5.5] current version is nil
==> web: [2015-09-14T22:14:54+00:00] DEBUG: package[mysql-server-5.5] candidate version is 5.5.44-0ubuntu0.12.04.1
==> web:
==> web:     - install version 5.5.44-0ubuntu0.12.04.1 of package mysql-server-5.5
==> web:   * service[mysql] action start
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing service[mysql] action start (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 59)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] found /etc/init/mysql.conf
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] enabled: start on runlevel [2345]
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] already running - nothing to do
==> web:  (up to date)
==> web:   * service[mysql] action enable[2015-09-14T22:15:12+00:00] INFO: Processing service[mysql] action enable (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 59)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] found /etc/init/mysql.conf
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] enabled: start on runlevel [2345]
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] already enabled - nothing to do
==> web:  (up to date)
==> web:   * execute[assign-root-password] action run
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing execute[assign-root-password] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 65)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:12+00:00] INFO: execute[assign-root-password] ran successfully
==> web:
==> web:     - execute /usr/bin/mysqladmin -u root password ''
==> web:   * template[/etc/mysql_grants.sql] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing template[/etc/mysql_grants.sql] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 74)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: touching /etc/mysql_grants.sql to create it
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] created file /etc/mysql_grants.sql
==> web:
==> web:     - create new file /etc/mysql_grants.sql
==> web: [2015-09-14T22:15:12+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-b93alm to compare with
==> web: [2015-09-14T22:15:12+00:00] DEBUG: running: diff -u /etc/mysql_grants.sql /tmp/chef-rendered-template20150914-1761-b93alm
==> web: [2015-09-14T22:15:12+00:00] DEBUG: reading modes from /etc/mysql_grants.sql file
==> web: [2015-09-14T22:15:12+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-b93alm
==> web: [2015-09-14T22:15:12+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-b93alm into place at /etc/mysql_grants.sql
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] updated file contents /etc/mysql_grants.sql
==> web:
==> web:     - update content in file /etc/mysql_grants.sql from none to 6be656
==> web:
==> web:         --- /etc/mysql_grants.sql	2015-09-14 22:15:12.400385329 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-b93alm	2015-09-14 22:15:12.408385302 +0000
==> web:         @@ -1 +1,9 @@
==> web:         +GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, DROP, RELOAD, SHUTDOWN, PROCESS, FILE, REFERENCES, INDEX, ALTER, SHOW DATABASES, SUPER, CREATE TEMPORARY TABLES, LOCK TABLES, EXECUTE, REPLICATION SLAVE, REPLICATION CLIENT ON *.* TO 'debian-sys-maint'@'localhost' IDENTIFIED BY '' WITH GRANT OPTION;
==> web:         +GRANT REPLICATION SLAVE ON *.* TO 'repl'@'%' identified by '';
==> web:         +GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY '' WITH GRANT OPTION;
==> web:         +DELETE FROM mysql.user WHERE User='';
==> web:         +DROP DATABASE IF EXISTS test;
==> web:         +DELETE FROM mysql.db WHERE Db='test' OR Db='test\_%';
==> web:         +SET PASSWORD FOR 'root'@'localhost' = PASSWORD('');
==> web:         +SET PASSWORD FOR 'root'@'127.0.0.1' = PASSWORD('');
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] owner changed to 0
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] group changed to 0
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] mode changed to 600
==> web:
==> web:     - change mode from '' to '0600'
==> web:
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * execute[install-grants] action nothing
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing execute[install-grants] action nothing (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 91)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Skipping execute[install-grants] due to action :nothing
==> web:   * directory[/etc/apparmor.d] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing directory[/etc/apparmor.d] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 100)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * template[/etc/apparmor.d/usr.sbin.mysqld] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing template[/etc/apparmor.d/usr.sbin.mysqld] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 107)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: template[/etc/apparmor.d/usr.sbin.mysqld] checksumming file at /etc/apparmor.d/usr.sbin.mysqld.
==> web: [2015-09-14T22:15:12+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-117unsj to compare with c870d4a6287a9b0205d05eff383c250f5e03d0d186d74f42c6e44cd75d74228a
==> web: [2015-09-14T22:15:12+00:00] DEBUG: running: diff -u /etc/apparmor.d/usr.sbin.mysqld /tmp/chef-rendered-template20150914-1761-117unsj
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/apparmor.d/usr.sbin.mysqld] backed up to /var/chef/backup/etc/apparmor.d/usr.sbin.mysqld.chef-20150914221512.423594
==> web: [2015-09-14T22:15:12+00:00] DEBUG: reading modes from /etc/apparmor.d/usr.sbin.mysqld file
==> web: [2015-09-14T22:15:12+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-117unsj
==> web: [2015-09-14T22:15:12+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-117unsj into place at /etc/apparmor.d/usr.sbin.mysqld
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/apparmor.d/usr.sbin.mysqld] updated file contents /etc/apparmor.d/usr.sbin.mysqld
==> web:
==> web:     - update content in file /etc/apparmor.d/usr.sbin.mysqld from c870d4 to b5fc90
==> web:         --- /etc/apparmor.d/usr.sbin.mysqld	2015-07-17 04:06:44.000000000 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-117unsj	2015-09-14 22:15:12.420385259 +0000
==> web:         @@ -2,7 +2,7 @@
==> web:          # Last Modified: Tue Jun 19 17:37:30 2007
==> web:          #include <tunables/global>
==> web:
==> web:         -/usr/sbin/mysqld {
==> web:         +/usr/sbin/mysqld flags=(complain) {
==> web:            #include <abstractions/base>
==> web:            #include <abstractions/nameservice>
==> web:            #include <abstractions/user-tmp>
==> web:         @@ -22,7 +22,7 @@
==> web:            /etc/mysql/*.pem r,
==> web:            /etc/mysql/conf.d/ r,
==> web:            /etc/mysql/conf.d/* r,
==> web:         -  /etc/mysql/*.cnf r,
==> web:         +  /etc/mysql/my.cnf r,
==> web:            /usr/lib/mysql/plugin/ r,
==> web:            /usr/lib/mysql/plugin/*.so* mr,
==> web:            /usr/sbin/mysqld mr,
==> web:         @@ -33,14 +33,9 @@
==> web:            /var/lib/mysql/** rwk,
==> web:            /var/log/mysql/ r,
==> web:            /var/log/mysql/* rw,
==> web:         -  /var/run/mysqld/mysqld.pid rw,
==> web:         +  /var/run/mysqld/mysqld.pid w,
==> web:            /var/run/mysqld/mysqld.sock w,
==> web:         -  /run/mysqld/mysqld.pid rw,
==> web:         -  /run/mysqld/mysqld.sock w,
==> web:
==> web:
==> web:            /sys/devices/system/cpu/ r,
==> web:         -
==> web:         -  # Site-specific additions and overrides. See local/README for details.
==> web:         -  #include <local/usr.sbin.mysqld>
==> web:          }
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/apparmor.d/usr.sbin.mysqld] sending reload action to service[apparmor-mysql] (immediate)
==> web:   * service[apparmor-mysql] action reload
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing service[apparmor-mysql] action reload (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 117)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[apparmor-mysql] falling back to process table inspection
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[apparmor-mysql] attempting to match 'apparmor-mysql' (/apparmor-mysql/) against process list
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[apparmor-mysql] running: false
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[apparmor-mysql] runlevel S, action start, priority 37
==> web:  (up to date)
==> web:   * service[apparmor-mysql] action nothing
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing service[apparmor-mysql] action nothing (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 117)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Skipping service[apparmor-mysql] due to action :nothing
==> web:   * template[/etc/mysql/debian.cnf] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing template[/etc/mysql/debian.cnf] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 123)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: template[/etc/mysql/debian.cnf] checksumming file at /etc/mysql/debian.cnf.
==> web: [2015-09-14T22:15:12+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-114m3a2 to compare with 966ac4e75cff333c42944fc0a442066ca2494e89d34f6330e6e5ed89a390be04
==> web: [2015-09-14T22:15:12+00:00] DEBUG: running: diff -u /etc/mysql/debian.cnf /tmp/chef-rendered-template20150914-1761-114m3a2
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/debian.cnf] backed up to /var/chef/backup/etc/mysql/debian.cnf.chef-20150914221512.596636
==> web: [2015-09-14T22:15:12+00:00] DEBUG: reading modes from /etc/mysql/debian.cnf file
==> web: [2015-09-14T22:15:12+00:00] DEBUG: applying mode = 600, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-114m3a2
==> web: [2015-09-14T22:15:12+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-114m3a2 into place at /etc/mysql/debian.cnf
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/debian.cnf] updated file contents /etc/mysql/debian.cnf
==> web:
==> web:     - update content in file /etc/mysql/debian.cnf from 966ac4 to 405f7b
==> web:         --- /etc/mysql/debian.cnf	2015-09-14 22:15:02.680419272 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-114m3a2	2015-09-14 22:15:12.592384669 +0000
==> web:         @@ -1,13 +1,13 @@
==> web:         -# Automatically generated for Debian scripts. DO NOT TOUCH!
==> web:          [client]
==> web:          host     = localhost
==> web:          user     = debian-sys-maint
==> web:         -password = NpK88X8vNFPzfv81
==> web:         +password =
==> web:          socket   = /var/run/mysqld/mysqld.sock
==> web:         +
==> web:          [mysql_upgrade]
==> web:          host     = localhost
==> web:          user     = debian-sys-maint
==> web:         -password = NpK88X8vNFPzfv81
==> web:         +password =
==> web:          socket   = /var/run/mysqld/mysqld.sock
==> web:          basedir  = /usr
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/etc/mysql/conf.d] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing directory[/etc/mysql/conf.d] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 134)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:15:12+00:00] INFO: directory[/etc/mysql/conf.d] owner changed to 106
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] INFO: directory[/etc/mysql/conf.d] group changed to 111
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] INFO: directory[/etc/mysql/conf.d] mode changed to 750
==> web:
==> web:     - change mode from '0755' to '0750'
==> web:     - change owner from 'root' to 'mysql'
==> web:     - change group from 'root' to 'mysql'
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/var/run/mysqld] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing directory[/var/run/mysqld] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 142)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] INFO: directory[/var/run/mysqld] group changed to 111
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web:
==> web:     - change group from 'root' to 'mysql'
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/var/lib/mysql] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing directory[/var/lib/mysql] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 150)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] INFO: directory[/var/lib/mysql] mode changed to 750
==> web:
==> web:     - change mode from '0700' to '0750'
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/mysql/my.cnf] action create
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing template[/etc/mysql/my.cnf] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 158)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: template[/etc/mysql/my.cnf] checksumming file at /etc/mysql/my.cnf.
==> web: [2015-09-14T22:15:12+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-l58uze to compare with 7630c91274a2a7dd0c4c25f046fdc25fa04fe2ea379cdb8c483078ce7a4a0bb1
==> web: [2015-09-14T22:15:12+00:00] DEBUG: running: diff -u /etc/mysql/my.cnf /tmp/chef-rendered-template20150914-1761-l58uze
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] backed up to /var/chef/backup/etc/mysql/my.cnf.chef-20150914221512.613343
==> web: [2015-09-14T22:15:12+00:00] DEBUG: reading modes from /etc/mysql/my.cnf file
==> web: [2015-09-14T22:15:12+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-l58uze
==> web: [2015-09-14T22:15:12+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-l58uze into place at /etc/mysql/my.cnf
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] updated file contents /etc/mysql/my.cnf
==> web:
==> web:     - update content in file /etc/mysql/my.cnf from 7630c9 to 507160
==> web:         --- /etc/mysql/my.cnf	2015-07-17 04:08:40.000000000 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-l58uze	2015-09-14 22:15:12.608384613 +0000
==> web:
==> web:         @@ -1,128 +1,17 @@
==> web:         -#
==> web:
==> web:         -# The MySQL database server configuration file.
==> web:         -#
==> web:         -# You can copy this to one of:
==> web:         -# - "/etc/mysql/my.cnf" to set global options,
==> web:         -# - "~/.my.cnf" to set user-specific options.
==> web:         -#
==> web:         -# One can use all long options that the program supports.
==> web:         -# Run program with --help to get a list of available options and with
==> web:         -# --print-defaults to see which it would actually understand and use.
==> web:         -#
==> web:         -# For explanations see
==> web:         -# http://dev.mysql.com/doc/mysql/en/server-system-variables.html
==> web:         -
==> web:         -# This will be passed to all mysql clients
==> web:         -# It has been reported that passwords should be enclosed with ticks/quotes
==> web:         -# escpecially if they contain "#" chars...
==> web:         -# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
==> web:          [client]
==> web:         -port		= 3306
==> web:         -socket		= /var/run/mysqld/mysqld.sock
==> web:         +port                           = 3306
==> web:         +socket                         = /var/run/mysqld/mysqld.sock
==> web:
==> web:         -# Here is entries for some specific programs
==> web:         -# The following values assume you have at least 32M ram
==> web:         -
==> web:         -# This was formally known as [safe_mysqld]. Both versions are currently parsed.
==> web:          [mysqld_safe]
==> web:         -socket		= /var/run/mysqld/mysqld.sock
==> web:         -nice		= 0
==> web:         +socket                         = /var/run/mysqld/mysqld.sock
==> web:
==> web:          [mysqld]
==> web:
==> web:         -#
==> web:         -# * Basic Settings
==> web:         -#
==> web:         -user		= mysql
==> web:         -pid-file	= /var/run/mysqld/mysqld.pid
==> web:         -socket		= /var/run/mysqld/mysqld.sock
==> web:         -port		= 3306
==> web:         -basedir		= /usr
==> web:         -datadir		= /var/lib/mysql
==> web:         -tmpdir		= /tmp
==> web:         -lc-messages-dir	= /usr/share/mysql
==> web:         -skip-external-locking
==> web:         -#
==> web:         -# Instead of skip-networking the default is now to listen only on
==> web:         -# localhost which is more compatible and is not less secure.
==> web:         -bind-address		= 127.0.0.1
==> web:         -#
==> web:         -# * Fine Tuning
==> web:         -#
==> web:         -key_buffer		= 16M
==> web:         -max_allowed_packet	= 16M
==> web:         -thread_stack		= 192K
==> web:         -thread_cache_size       = 8
==> web:         -# This replaces the startup script and checks MyISAM tables if needed
==> web:         -# the first time they are touched
==> web:         -myisam-recover         = BACKUP
==> web:         -#max_connections        = 100
==> web:         -#table_cache            = 64
==> web:         -#thread_concurrency     = 10
==> web:         -#
==> web:         -# * Query Cache Configuration
==> web:         -#
==> web:         -query_cache_limit	= 1M
==> web:         -query_cache_size        = 16M
==> web:         -#
==> web:         -# * Logging and Replication
==> web:         -#
==> web:         -# Both location gets rotated by the cronjob.
==> web:         -# Be aware that this log type is a performance killer.
==> web:         -# As of 5.1 you can enable the log at runtime!
==> web:         -#general_log_file        = /var/log/mysql/mysql.log
==> web:         -#general_log             = 1
==> web:         -#
==> web:         -# Error log - should be very few entries.
==> web:         -#
==> web:         -log_error = /var/log/mysql/error.log
==> web:         -#
==> web:         -# Here you can see queries with especially long duration
==> web:         -#log_slow_queries	= /var/log/mysql/mysql-slow.log
==> web:         -#long_query_time = 2
==> web:         -#log-queries-not-using-indexes
==> web:         -#
==> web:         -# The following can be used as easy to replay backup logs or for replication.
==> web:         -# note: if you are setting up a replication slave, see README.Debian about
==> web:         -#       other settings you may need to change.
==> web:         -#server-id		= 1
==> web:         -#log_bin			= /var/log/mysql/mysql-bin.log
==> web:         -expire_logs_days	= 10
==> web:         -max_binlog_size         = 100M
==> web:         -#binlog_do_db		= include_database_name
==> web:
==> web:         -#binlog_ignore_db	= include_database_name
==> web:         -#
==> web:         -# * InnoDB
==> web:         -#
==> web:
==> web:         -# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
==> web:         -# Read the manual for more InnoDB related options. There are many!
==> web:
==> web:         -#
==> web:
==> web:         -# * Security Features
==> web:         -#
==> web:         -# Read the manual, too, if you want chroot!
==> web:         -# chroot = /var/lib/mysql/
==> web:         -#
==> web:         -# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
==> web:         -#
==> web:         -# ssl-ca=/etc/mysql/cacert.pem
==> web:         -# ssl-cert=/etc/mysql/server-cert.pem
==> web:         -# ssl-key=/etc/mysql/server-key.pem
==> web:         +user                           = mysql
==> web:         +pid-file                       = /var/run/mysqld/mysql.pid
==> web:         +socket                         = /var/run/mysqld/mysqld.sock
==> web:         +port                           = 3306
==> web:         +datadir                        = /var/lib/mysql
==> web:
==> web:         -
==> web:         -
==> web:         -[mysqldump]
==> web:         -quick
==> web:         -quote-names
==> web:         -max_allowed_packet	= 16M
==> web:         -
==> web:          [mysql]
==> web:         -#no-auto-rehash	# faster start of mysql but no tab completition
==> web:         -
==> web:         -[isamchk]
==> web:
==> web:         -key_buffer		= 16M
==> web:         -
==> web:         -#
==> web:         -# * IMPORTANT: Additional settings that can override those from this file!
==> web:         -#   The files must end with '.cnf', otherwise they'll be ignored.
==> web:         -#
==> web:         -!includedir /etc/mysql/conf.d/
==> web:         +!includedir /etc/mysql/conf.d
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_uid != current_uid, updating owner
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] owner changed to 106
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_gid != current_gid, updating group
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] group changed to 111
==> web: [2015-09-14T22:15:12+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] mode changed to 600
==> web:
==> web:     - change mode from '0644' to '0600'
==> web:     - change owner from 'root' to 'mysql'
==> web:     - change group from 'root' to 'mysql'
==> web: [2015-09-14T22:15:12+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * bash[move mysql data to datadir] action nothing
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing bash[move mysql data to datadir] action nothing (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 180)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Skipping bash[move mysql data to datadir] due to action :nothing
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql_grants.sql] sending run action to execute[install-grants] (delayed)
==> web:   * execute[install-grants] action run[2015-09-14T22:15:12+00:00] INFO: Processing execute[install-grants] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 91)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:12+00:00] INFO: execute[install-grants] ran successfully
==> web:
==> web:     - execute /usr/bin/mysql -u root  < /etc/mysql_grants.sql
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] sending run action to bash[move mysql data to datadir] (delayed)
==> web:   * bash[move mysql data to datadir] action run
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing bash[move mysql data to datadir] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 180)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:12+00:00] DEBUG: bash[move mysql data to datadir] sentinel file /var/lib/mysql/ib_logfile1 exists - nothing to do
==> web: [2015-09-14T22:15:12+00:00] INFO: template[/etc/mysql/my.cnf] sending restart action to service[mysql] (delayed)
==> web:   * service[mysql] action restart
==> web: [2015-09-14T22:15:12+00:00] INFO: Processing service[mysql] action restart (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/mysql/libraries/provider_mysql_service_ubuntu.rb line 59)
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] found /etc/init/mysql.conf
==> web: [2015-09-14T22:15:12+00:00] DEBUG: service[mysql] enabled: start on runlevel [2345]
==> web: [2015-09-14T22:15:12+00:00] DEBUG: Executing /sbin/restart mysql
==> web: [2015-09-14T22:15:15+00:00] DEBUG: ---- Begin output of /sbin/restart mysql ----
==> web: [2015-09-14T22:15:15+00:00] DEBUG: STDOUT: mysql start/running, process 31583
==> web: [2015-09-14T22:15:15+00:00] DEBUG: STDERR:
==> web: [2015-09-14T22:15:15+00:00] DEBUG: ---- End output of /sbin/restart mysql ----
==> web: [2015-09-14T22:15:15+00:00] DEBUG: Ran /sbin/restart mysql returned 0
==> web: [2015-09-14T22:15:15+00:00] INFO: service[mysql] restarted
==> web:
==> web:     - restart service service[mysql]
==> web:
==> web: Recipe: my_company::resque_setup
==> web:   * template[/etc/init/my_company-deploy.conf] action create[2015-09-14T22:15:15+00:00] INFO: Processing template[/etc/init/my_company-deploy.conf] action create (my_company::resque_setup line 3)
==> web: [2015-09-14T22:15:15+00:00] DEBUG: touching /etc/init/my_company-deploy.conf to create it
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/my_company-deploy.conf] created file /etc/init/my_company-deploy.conf
==> web:
==> web:     - create new file /etc/init/my_company-deploy.conf
==> web: [2015-09-14T22:15:15+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-thybfg to compare with
==> web: [2015-09-14T22:15:15+00:00] DEBUG: running: diff -u /etc/init/my_company-deploy.conf /tmp/chef-rendered-template20150914-1761-thybfg
==> web: [2015-09-14T22:15:15+00:00] DEBUG: reading modes from /etc/init/my_company-deploy.conf file
==> web: [2015-09-14T22:15:15+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-thybfg
==> web: [2015-09-14T22:15:15+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-thybfg into place at /etc/init/my_company-deploy.conf
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/my_company-deploy.conf] updated file contents /etc/init/my_company-deploy.conf
==> web:
==> web:     - update content in file /etc/init/my_company-deploy.conf from none to f2ab88
==> web:         --- /etc/init/my_company-deploy.conf	2015-09-14 22:15:15.404379397 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-thybfg	2015-09-14 22:15:15.408379176 +0000
==> web:         @@ -1 +1,8 @@
==> web:         +# Dummy task to trigger the lifecycle events (starting, stopped, etc.)
==> web:         +# to which a number of auxiliary tasks listen, such as starting and
==> web:         +# starting resque workers.
==> web:         +description "Dummy task representing a my_company deploy"
==> web:         +author "Dan Applegate <dan@my_company.com>"
==> web:         +
==> web:         +manual[2015-09-14T22:15:15+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:15:15+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * template[/etc/init/ss-resque-manager.conf] action create[2015-09-14T22:15:15+00:00] INFO: Processing template[/etc/init/ss-resque-manager.conf] action create (my_company::resque_setup line 5)
==> web: [2015-09-14T22:15:15+00:00] DEBUG: touching /etc/init/ss-resque-manager.conf to create it
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-manager.conf] created file /etc/init/ss-resque-manager.conf
==> web:
==> web:     - create new file /etc/init/ss-resque-manager.conf
==> web: [2015-09-14T22:15:15+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-mw6so5 to compare with
==> web: [2015-09-14T22:15:15+00:00] DEBUG: running: diff -u /etc/init/ss-resque-manager.conf /tmp/chef-rendered-template20150914-1761-mw6so5
==> web: [2015-09-14T22:15:15+00:00] DEBUG: reading modes from /etc/init/ss-resque-manager.conf file
==> web: [2015-09-14T22:15:15+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-mw6so5
==> web: [2015-09-14T22:15:15+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-mw6so5 into place at /etc/init/ss-resque-manager.conf
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-manager.conf] updated file contents /etc/init/ss-resque-manager.conf
==> web:
==> web:     - update content in file /etc/init/ss-resque-manager.conf from none to b0c1d3
==> web:
==> web:         --- /etc/init/ss-resque-manager.conf	2015-09-14 22:15:15.412378793 +0000
==> web:
==> web:         +++ /tmp/chef-rendered-template20150914-1761-mw6so5	2015-09-14 22:15:15.416378301 +0000
==> web:
==> web:         @@ -1 +1,20 @@
==> web:
==> web:         +# Resque manager task which starts the given number of resque worker
==> web:
==> web:         +# processes
==> web:
==> web:         +description "my_company resque task which starts worker services"
==> web:
==> web:         +author "Dan Applegate <dan@my_company.com>"
==> web:
==> web:         +
==> web:
==> web:         +start on stopped my_company-deploy or start-resque
==> web:
==> web:         +
==> web:
==> web:         +task
==> web:
==> web:         +
==> web:
==> web:         +env COUNT=4
==> web:
==> web:         +
==> web:
==> web:         +script
==> web:
==> web:         +  for i in $(seq 1 $COUNT); do
==> web:
==> web:         +    # Start $COUNT workers, using the default path and queue values
==> web:
==> web:         +    # as outlined in ss-resque-worker.conf
==> web:
==> web:         +    start ss-resque-worker ID=$i
==> web:
==> web:         +  done
==> web:
==> web:         +  start ss-resque-worker ID=scheduler SCRIPTPATH=/vagrant/htdocs/protected/components/resque/resque-scheduler.php QUEUE=*
==> web:
==> web:         +end script
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-manager.conf] owner changed to 0
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-manager.conf] group changed to 0
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-manager.conf] mode changed to 600
==> web:
==> web:     - change mode from '' to '0600'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:15:15+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/init/ss-resque-worker.conf] action create
==> web: [2015-09-14T22:15:15+00:00] INFO: Processing template[/etc/init/ss-resque-worker.conf] action create (my_company::resque_setup line 16)
==> web: [2015-09-14T22:15:15+00:00] DEBUG: touching /etc/init/ss-resque-worker.conf to create it
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-worker.conf] created file /etc/init/ss-resque-worker.conf
==> web:
==> web:     - create new file /etc/init/ss-resque-worker.conf
==> web: [2015-09-14T22:15:15+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1a4g789 to compare with
==> web: [2015-09-14T22:15:15+00:00] DEBUG: running: diff -u /etc/init/ss-resque-worker.conf /tmp/chef-rendered-template20150914-1761-1a4g789
==> web: [2015-09-14T22:15:15+00:00] DEBUG: reading modes from /etc/init/ss-resque-worker.conf file
==> web: [2015-09-14T22:15:15+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1a4g789
==> web: [2015-09-14T22:15:15+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1a4g789 into place at /etc/init/ss-resque-worker.conf
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-worker.conf] updated file contents /etc/init/ss-resque-worker.conf
==> web:
==> web:     - update content in file /etc/init/ss-resque-worker.conf from none to e7afcb
==> web:
==> web:         --- /etc/init/ss-resque-worker.conf	2015-09-14 22:15:15.424377438 +0000
==> web:
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1a4g789	2015-09-14 22:15:15.428377081 +0000
==> web:         @@ -1 +1,41 @@
==> web:         +# Resque worker service for the my_company application
==> web:         +
==> web:         +description "my_company Resque worker service"
==> web:         +author "Dan Applegate <dan@my_company.com>"
==> web:         +
==> web:         +stop on runlevel [!2345] or starting my_company-deploy or stop-resque
==> web:         +
==> web:         +instance $ID
==> web:         +
==> web:         +respawn
==> web:         +
==> web:         +# Resque interprets the QUIT signal by waiting for the currently-executing
==> web:         +# job to finish, then exiting
==> web:         +kill signal QUIT
==> web:         +# Give the resque worker time to exit gracefully, to finish its current
==> web:         +# job, and to de-register itself from the server
==> web:         +# NOTE: To allow this graceful exit, this timeout MUST be set to longer than
==> web:         +# the interval
==> web:         +kill timeout 15
==> web:         +
==> web:         +env SCRIPTPATH=/vagrant/htdocs/protected/components/resque/resque.php
==> web:         +env QUEUE=dev
==> web:         +env APP_INCLUDE=/vagrant/htdocs/protected/components/resque/ss_resque_bootstrap.php
==> web:         +env REDIS_BACKEND=127.0.0.1:6379
==> web:         +env INTERVAL=3
==> web:         +env COUNT=1
==> web:
==> web:         +# LOGGING is synonymous with VERBOSE, and both of those preclude
==> web:         +# VVERBOSE, which includes timestamps in logs. So, we want no LOGGING nor VERBOSE,
==> web:         +# but VVERBOSE
==> web:         +env VVERBOSE=1
==> web:         +
==> web:         +pre-start script
==> web:
==> web:         +    if [ $INTERVAL -gt 15 ]
==> web:         +    then
==> web:         +        echo "Warning: Resque worker INTERVAL ($INTERVAL) set to more than kill timeout (15)! May not allow graceful exit!"
==> web:         +    fi
==> web:         +end script
==> web:         +
==> web:         +# When we compile php 5.5.10 from source, it installs it into /usr/local/bin
==> web:         +exec /usr/local/bin/php $SCRIPTPATH
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-worker.conf] owner changed to 0
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-worker.conf] group changed to 0
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/init/ss-resque-worker.conf] mode changed to 600
==> web:
==> web:     - change mode from '' to '0600'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:15:15+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/logrotate.d/my_company-logrotate] action create
==> web: [2015-09-14T22:15:15+00:00] INFO: Processing template[/etc/logrotate.d/my_company-logrotate] action create (my_company::resque_setup line 29)
==> web: [2015-09-14T22:15:15+00:00] DEBUG: touching /etc/logrotate.d/my_company-logrotate to create it
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/logrotate.d/my_company-logrotate] created file /etc/logrotate.d/my_company-logrotate
==> web:
==> web:     - create new file /etc/logrotate.d/my_company-logrotate
==> web: [2015-09-14T22:15:15+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1udnnxu to compare with
==> web: [2015-09-14T22:15:15+00:00] DEBUG: running: diff -u /etc/logrotate.d/my_company-logrotate /tmp/chef-rendered-template20150914-1761-1udnnxu
==> web: [2015-09-14T22:15:15+00:00] DEBUG: reading modes from /etc/logrotate.d/my_company-logrotate file
==> web: [2015-09-14T22:15:15+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1udnnxu
==> web: [2015-09-14T22:15:15+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1udnnxu into place at /etc/logrotate.d/my_company-logrotate
==> web: [2015-09-14T22:15:15+00:00] INFO: template[/etc/logrotate.d/my_company-logrotate] updated file contents /etc/logrotate.d/my_company-logrotate
==> web:
==> web:     - update content in file /etc/logrotate.d/my_company-logrotate from none to d2049f
==> web:
==> web:         --- /etc/logrotate.d/my_company-logrotate	2015-09-14 22:15:15.436376495 +0000
==> web:
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1udnnxu	2015-09-14 22:15:15.436376495 +0000
==> web:
==> web:         @@ -1 +1,8 @@
==> web:
==> web:         +/var/log/my_company/*.log {
==> web:
==> web:         +        daily
==> web:
==> web:         +        missingok
==> web:
==> web:         +        rotate 30
==> web:
==> web:         +        compress
==> web:
==> web:         +        notifempty
==> web:
==> web:         +}
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:15+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:15:15+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: java::openjdk
==> web:   * package[openjdk-6-jdk] action install
==> web: [2015-09-14T22:15:15+00:00] INFO: Processing package[openjdk-6-jdk] action install (java::openjdk line 46)
==> web: [2015-09-14T22:15:15+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:15+00:00] DEBUG: package[openjdk-6-jdk] checking package status for openjdk-6-jdk
==> web: [2015-09-14T22:15:15+00:00] DEBUG: package[openjdk-6-jdk] current version is nil
==> web: [2015-09-14T22:15:15+00:00] DEBUG: package[openjdk-6-jdk] candidate version is 6b36-1.13.8-0ubuntu1~12.04
==> web:
==> web:     - install version 6b36-1.13.8-0ubuntu1~12.04 of package openjdk-6-jdk
==> web:   * package[openjdk-6-jre-headless] action install[2015-09-14T22:15:44+00:00] INFO: Processing package[openjdk-6-jre-headless] action install (java::openjdk line 46)
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:44+00:00] DEBUG: package[openjdk-6-jre-headless] checking package status for openjdk-6-jre-headless
==> web: [2015-09-14T22:15:44+00:00] DEBUG: package[openjdk-6-jre-headless] current version is 6b36-1.13.8-0ubuntu1~12.04
==> web: [2015-09-14T22:15:44+00:00] DEBUG: package[openjdk-6-jre-headless] candidate version is 6b36-1.13.8-0ubuntu1~12.04
==> web: [2015-09-14T22:15:44+00:00] DEBUG: package[openjdk-6-jre-headless] is already installed - nothing to do
==> web:  (up to date)
==> web:   * java_alternatives[set-java-alternatives] action set
==> web: [2015-09-14T22:15:44+00:00] INFO: Processing java_alternatives[set-java-alternatives] action set (java::openjdk line 50)
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Adding alternative for apt
==> web:
==> web:     - Add alternative for apt
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Skipping setting alternative for ControlPanel. Command /usr/lib/jvm/java-6-openjdk-amd64/bin/ControlPanel does not exist.
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Skipping setting alternative for HtmlConverter. Command /usr/lib/jvm/java-6-openjdk-amd64/bin/HtmlConverter does not exist.
==> web: [2015-09-14T22:15:44+00:00] DEBUG: Adding alternative for java
==> web:
==> web:     - Add alternative for java
==> web: [2015-09-14T22:15:45+00:00] DEBUG: Setting alternative for java
==> web:
==> web:     - Set alternative for java
==> web: [2015-09-14T22:15:45+00:00] DEBUG: Adding alternative for javaws
==> web:
==> web:     - Add alternative for javaws
==> web: [2015-09-14T22:15:45+00:00] DEBUG: Setting alternative for javaws
==> web:
==> web:     - Set alternative for javaws
==> web: [2015-09-14T22:15:45+00:00] DEBUG: Skipping setting alternative for jcontrol. Command /usr/lib/jvm/java-6-openjdk-amd64/bin/jcontrol does not exist.
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Skipping setting alternative for jvisualvm. Command /usr/lib/jvm/java-6-openjdk-amd64/bin/jvisualvm does not exist.
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Adding alternative for keytool
==> web:
==> web:     - Add alternative for keytool
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Setting alternative for keytool
==> web:
==> web:     - Set alternative for keytool
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Adding alternative for orbd
==> web:
==> web:     - Add alternative for orbd
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Setting alternative for orbd
==> web:
==> web:     - Set alternative for orbd
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Adding alternative for pack200
==> web:
==> web:     - Add alternative for pack200
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Setting alternative for pack200
==> web:
==> web:     - Set alternative for pack200
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Adding alternative for policytool
==> web:
==> web:     - Add alternative for policytool
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Setting alternative for policytool
==> web:
==> web:     - Set alternative for policytool
==> web: [2015-09-14T22:15:46+00:00] DEBUG: Adding alternative for rmid
==> web:
==> web:     - Add alternative for rmid
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Setting alternative for rmid
==> web:
==> web:     - Set alternative for rmid
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Adding alternative for rmiregistry
==> web:
==> web:     - Add alternative for rmiregistry
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Setting alternative for rmiregistry
==> web:
==> web:     - Set alternative for rmiregistry
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Adding alternative for servertool
==> web:
==> web:     - Add alternative for servertool
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Setting alternative for servertool
==> web:
==> web:     - Set alternative for servertool
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Adding alternative for tnameserv
==> web:
==> web:     - Add alternative for tnameserv
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Setting alternative for tnameserv
==> web:
==> web:     - Set alternative for tnameserv
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Adding alternative for unpack200
==> web:
==> web:     - Add alternative for unpack200
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Setting alternative for unpack200
==> web:
==> web:     - Set alternative for unpack200
==> web: Recipe: java::default_java_symlink
==> web:   * link[/usr/lib/jvm/default-java] action create
==> web: [2015-09-14T22:15:47+00:00] INFO: Processing link[/usr/lib/jvm/default-java] action create (java::default_java_symlink line 16)
==> web: [2015-09-14T22:15:47+00:00] DEBUG: link[/usr/lib/jvm/default-java] created symbolic link from /usr/lib/jvm/java-6-openjdk-amd64 -> /usr/lib/jvm/default-java
==> web: [2015-09-14T22:15:47+00:00] INFO: link[/usr/lib/jvm/default-java] created
==> web:
==> web:     - create symlink at /usr/lib/jvm/default-java to /usr/lib/jvm/java-6-openjdk-amd64
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web:
==> web: Recipe: java::set_java_home
==> web:   * ruby_block[set-env-java-home] action run[2015-09-14T22:15:47+00:00] INFO: Processing ruby_block[set-env-java-home] action run (java::set_java_home line 19)
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:47+00:00] INFO: ruby_block[set-env-java-home] called
==> web:
==> web:     - execute the ruby block set-env-java-home
==> web:   * directory[/etc/profile.d] action create
==> web: [2015-09-14T22:15:47+00:00] INFO: Processing directory[/etc/profile.d] action create (java::set_java_home line 26)
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web:  (up to date)
==> web:   * file[/etc/profile.d/jdk.sh] action create
==> web: [2015-09-14T22:15:47+00:00] INFO: Processing file[/etc/profile.d/jdk.sh] action create (java::set_java_home line 30)
==> web: [2015-09-14T22:15:47+00:00] DEBUG: touching /etc/profile.d/jdk.sh to create it
==> web: [2015-09-14T22:15:47+00:00] INFO: file[/etc/profile.d/jdk.sh] created file /etc/profile.d/jdk.sh
==> web:
==> web:     - create new file /etc/profile.d/jdk.sh
==> web: [2015-09-14T22:15:47+00:00] DEBUG: calculating checksum of /tmp/.jdk.sh20150914-1761-jq09k2 to compare with
==> web: [2015-09-14T22:15:47+00:00] DEBUG: running: diff -u /etc/profile.d/jdk.sh /tmp/.jdk.sh20150914-1761-jq09k2
==> web: [2015-09-14T22:15:47+00:00] DEBUG: reading modes from /etc/profile.d/jdk.sh file
==> web: [2015-09-14T22:15:47+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/.jdk.sh20150914-1761-jq09k2
==> web: [2015-09-14T22:15:47+00:00] DEBUG: moving temporary file /tmp/.jdk.sh20150914-1761-jq09k2 into place at /etc/profile.d/jdk.sh
==> web: [2015-09-14T22:15:47+00:00] INFO: file[/etc/profile.d/jdk.sh] updated file contents /etc/profile.d/jdk.sh
==> web:
==> web:     - update content in file /etc/profile.d/jdk.sh from none to 37eba7
==> web:
==> web:         --- /etc/profile.d/jdk.sh	2015-09-14 22:15:47.972268794 +0000
==> web:         +++ /tmp/.jdk.sh20150914-1761-jq09k2	2015-09-14 22:15:47.972268794 +0000
==> web:         @@ -1 +1,2 @@
==> web:         +export JAVA_HOME=/usr/lib/jvm/java-6-openjdk-amd64
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:15:47+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:15:47+00:00] INFO: file[/etc/profile.d/jdk.sh] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web: [2015-09-14T22:15:47+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: apt::default
==> web:   * execute[apt-get-update] action run
==> web: [2015-09-14T22:15:47+00:00] INFO: Processing execute[apt-get-update] action run (apt::default line 29)
==> web: [2015-09-14T22:15:47+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:53+00:00] INFO: execute[apt-get-update] ran successfully
==> web:
==> web:     - execute apt-get update
==> web:   * execute[apt-get update] action nothing[2015-09-14T22:15:53+00:00] INFO: Processing execute[apt-get update] action nothing (apt::default line 37)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:53+00:00] DEBUG: Skipping execute[apt-get update] due to action :nothing
==> web:   * execute[apt-get autoremove] action nothing[2015-09-14T22:15:53+00:00] INFO: Processing execute[apt-get autoremove] action nothing (apt::default line 45)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:53+00:00] DEBUG: Skipping execute[apt-get autoremove] due to action :nothing
==> web:   * execute[apt-get autoclean] action nothing[2015-09-14T22:15:53+00:00] INFO: Processing execute[apt-get autoclean] action nothing (apt::default line 52)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:15:53+00:00] DEBUG: Skipping execute[apt-get autoclean] due to action :nothing
==> web:   * package[update-notifier-common] action install[2015-09-14T22:15:53+00:00] INFO: Processing package[update-notifier-common] action install (apt::default line 59)
==> web: [2015-09-14T22:15:53+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:15:53+00:00] DEBUG: package[update-notifier-common] checking package status for update-notifier-common
==> web: [2015-09-14T22:15:53+00:00] DEBUG: package[update-notifier-common] current version is nil
==> web: [2015-09-14T22:15:53+00:00] DEBUG: package[update-notifier-common] candidate version is 0.119ubuntu8.7
==> web:
==> web:     - install version 0.119ubuntu8.7 of package update-notifier-common
==> web: [2015-09-14T22:15:56+00:00] INFO: package[update-notifier-common] sending run action to execute[apt-get-update] (immediate)
==> web:   * execute[apt-get-update] action run
==> web: [2015-09-14T22:15:56+00:00] INFO: Processing execute[apt-get-update] action run (apt::default line 29)
==> web: [2015-09-14T22:15:56+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:16:00+00:00] INFO: execute[apt-get-update] ran successfully
==> web:
==> web:     - execute apt-get update
==> web:   * execute[apt-get-update-periodic] action run[2015-09-14T22:16:00+00:00] INFO: Processing execute[apt-get-update-periodic] action run (apt::default line 64)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:16:00+00:00] DEBUG: Skipping execute[apt-get-update-periodic] due to only_if ruby block
==> web:   * directory[/var/cache/local] action create[2015-09-14T22:16:00+00:00] INFO: Processing directory[/var/cache/local] action create (apt::default line 75)
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * directory[/var/cache/local/preseeding] action create[2015-09-14T22:16:00+00:00] INFO: Processing directory[/var/cache/local/preseeding] action create (apt::default line 75)
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:16:00+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web: Recipe: nodejs::install_from_source
==> web:   * package[libssl-dev] action install[2015-09-14T22:16:00+00:00] INFO: Processing package[libssl-dev] action install (nodejs::install_from_source line 27)
==> web: [2015-09-14T22:16:00+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:16:00+00:00] DEBUG: package[libssl-dev] checking package status for libssl-dev
==> web: [2015-09-14T22:16:00+00:00] DEBUG: package[libssl-dev] current version is 1.0.1-4ubuntu5.5
==> web: [2015-09-14T22:16:00+00:00] DEBUG: package[libssl-dev] candidate version is 1.0.1-4ubuntu5.31
==> web: [2015-09-14T22:16:00+00:00] DEBUG: package[libssl-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * remote_file[/usr/local/src/node-v0.10.28.tar.gz] action create_if_missing
==> web: [2015-09-14T22:16:00+00:00] INFO: Processing remote_file[/usr/local/src/node-v0.10.28.tar.gz] action create_if_missing (nodejs::install_from_source line 38)
==> web: [2015-09-14T22:16:00+00:00] DEBUG: touching /usr/local/src/node-v0.10.28.tar.gz to create it
==> web: [2015-09-14T22:16:00+00:00] INFO: remote_file[/usr/local/src/node-v0.10.28.tar.gz] created file /usr/local/src/node-v0.10.28.tar.gz
==> web:
==> web:     - create new file /usr/local/src/node-v0.10.28.tar.gz
==> web: [2015-09-14T22:16:00+00:00] DEBUG: remote_file[/usr/local/src/node-v0.10.28.tar.gz] checking for changes
==> web: [2015-09-14T22:16:00+00:00] DEBUG: turning gzip compression off due to filename ending in gz
==> web: [2015-09-14T22:16:00+00:00] DEBUG: Cache control headers: {}
==> web: [2015-09-14T22:16:00+00:00] DEBUG: Initiating GET to http://nodejs.org/dist/v0.10.28/node-v0.10.28.tar.gz
==> web: [2015-09-14T22:16:00+00:00] DEBUG: ---- HTTP Request Header Data: ----
==> web: [2015-09-14T22:16:00+00:00] DEBUG: Streaming download from http://nodejs.org/dist/v0.10.28/node-v0.10.28.tar.gz to tempfile /tmp/chef-rest20150914-1761-eyrbjh
==> web: [2015-09-14T22:16:03+00:00] DEBUG: ---- HTTP Status and Header Data: ----
==> web: [2015-09-14T22:16:03+00:00] DEBUG: HTTP 1.1 200 OK
==> web: [2015-09-14T22:16:03+00:00] DEBUG: date: Mon, 14 Sep 2015 22:16:00 GMT
==> web: [2015-09-14T22:16:03+00:00] DEBUG: content-type: application/gzip
==> web: [2015-09-14T22:16:03+00:00] DEBUG: content-length: 13554081
==> web: [2015-09-14T22:16:03+00:00] DEBUG: connection: close
==> web: [2015-09-14T22:16:03+00:00] DEBUG: set-cookie: __cfduid=d08d39c73c24c2bdb63d82085b781337f1442268960; expires=Tue, 13-Sep-16 22:16:00 GMT; path=/; domain=.nodejs.org; HttpOnly
==> web: [2015-09-14T22:16:03+00:00] DEBUG: last-modified: Fri, 02 May 2014 00:54:29 GMT
==> web: [2015-09-14T22:16:03+00:00] DEBUG: etag: "5362ecc5-ced1a1"
==> web: [2015-09-14T22:16:03+00:00] DEBUG: accept-ranges: bytes
==> web: [2015-09-14T22:16:03+00:00] DEBUG: server: cloudflare-nginx
==> web: [2015-09-14T22:16:03+00:00] DEBUG: cf-ray: 225f742cf8f421e6-EWR
==> web: [2015-09-14T22:16:03+00:00] DEBUG: ---- End HTTP Status/Header Data ----
==> web: [2015-09-14T22:16:03+00:00] DEBUG: calculating checksum of /tmp/chef-rest20150914-1761-eyrbjh to compare with
==> web: [2015-09-14T22:16:03+00:00] DEBUG: reading modes from /usr/local/src/node-v0.10.28.tar.gz file
==> web: [2015-09-14T22:16:03+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rest20150914-1761-eyrbjh
==> web: [2015-09-14T22:16:03+00:00] DEBUG: moving temporary file /tmp/chef-rest20150914-1761-eyrbjh into place at /usr/local/src/node-v0.10.28.tar.gz
==> web: [2015-09-14T22:16:03+00:00] INFO: remote_file[/usr/local/src/node-v0.10.28.tar.gz] updated file contents /usr/local/src/node-v0.10.28.tar.gz
==> web:
==> web:     - update content in file /usr/local/src/node-v0.10.28.tar.gz from none to abddc6
==> web:         (file sizes exceed 10000000 bytes, diff output suppressed)
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:16:03+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:16:03+00:00] INFO: remote_file[/usr/local/src/node-v0.10.28.tar.gz] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web: [2015-09-14T22:16:03+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * execute[tar --no-same-owner -zxf node-v0.10.28.tar.gz] action run
==> web: [2015-09-14T22:16:03+00:00] INFO: Processing execute[tar --no-same-owner -zxf node-v0.10.28.tar.gz] action run (nodejs::install_from_source line 47)
==> web: [2015-09-14T22:16:03+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:16:04+00:00] INFO: execute[tar --no-same-owner -zxf node-v0.10.28.tar.gz] ran successfully
==> web:
==> web:     - execute tar --no-same-owner -zxf node-v0.10.28.tar.gz
==> web:   * bash[compile node.js (on 2 cpu)] action run
==> web: [2015-09-14T22:16:04+00:00] INFO: Processing bash[compile node.js (on 2 cpu)] action run (nodejs::install_from_source line 52)
==> web: [2015-09-14T22:16:04+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:25+00:00] INFO: bash[compile node.js (on 2 cpu)] ran successfully
==> web:
==> web:     - execute "bash"  "/tmp/chef-script20150914-1761-3q6eox"
==> web:   * execute[nodejs make install] action run[2015-09-14T22:18:25+00:00] INFO: Processing execute[nodejs make install] action run (nodejs::install_from_source line 63)
==> web: [2015-09-14T22:18:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:27+00:00] INFO: execute[nodejs make install] ran successfully
==> web:
==> web:     - execute make install
==> web: Recipe: my_company::composer-self-update
==> web:   * execute[composer self-update] action run
==> web: [2015-09-14T22:18:27+00:00] INFO: Processing execute[composer self-update] action run (my_company::composer-self-update line 1)
==> web: [2015-09-14T22:18:27+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:28+00:00] INFO: execute[composer self-update] ran successfully
==> web:
==> web:     - execute composer self-update
==> web: Recipe: my_company::local
==> web:   * execute[sudo npm install --global jshint] action run
==> web: [2015-09-14T22:18:28+00:00] INFO: Processing execute[sudo npm install --global jshint] action run (my_company::local line 5)
==> web: [2015-09-14T22:18:28+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:33+00:00] INFO: execute[sudo npm install --global jshint] ran successfully
==> web:
==> web:     - execute sudo npm install --global jshint
==> web:   * execute[sudo npm install --global newman] action run
==> web: [2015-09-14T22:18:33+00:00] INFO: Processing execute[sudo npm install --global newman] action run (my_company::local line 9)
==> web: [2015-09-14T22:18:33+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:50+00:00] INFO: execute[sudo npm install --global newman] ran successfully
==> web:
==> web:     - execute sudo npm install --global newman
==> web:   * template[/etc/nginx/sites-available/my_company.dev] action create[2015-09-14T22:18:50+00:00] INFO: Processing template[/etc/nginx/sites-available/my_company.dev] action create (my_company::local line 26)
==> web: [2015-09-14T22:18:50+00:00] DEBUG: touching /etc/nginx/sites-available/my_company.dev to create it
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/nginx/sites-available/my_company.dev] created file /etc/nginx/sites-available/my_company.dev
==> web:
==> web:     - create new file /etc/nginx/sites-available/my_company.dev[2015-09-14T22:18:50+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-r8d23d to compare with
==> web: [2015-09-14T22:18:50+00:00] DEBUG: running: diff -u /etc/nginx/sites-available/my_company.dev /tmp/chef-rendered-template20150914-1761-r8d23d
==> web: [2015-09-14T22:18:50+00:00] DEBUG: reading modes from /etc/nginx/sites-available/my_company.dev file
==> web: [2015-09-14T22:18:50+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-r8d23d
==> web: [2015-09-14T22:18:50+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-r8d23d into place at /etc/nginx/sites-available/my_company.dev
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/nginx/sites-available/my_company.dev] updated file contents /etc/nginx/sites-available/my_company.dev
==> web:
==> web:     - update content in file /etc/nginx/sites-available/my_company.dev from none to 7b6566
==> web:         --- /etc/nginx/sites-available/my_company.dev	2015-09-14 22:18:50.807813541 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-r8d23d	2015-09-14 22:18:50.815813525 +0000
==> web:         @@ -1 +1,126 @@
==> web:         +server {
==> web:         +    listen 80;
==> web:         +    server_name api-test.my_company.dev;
==> web:         +
==> web:         +    client_max_body_size 20M;
==> web:         +
==> web:         +    # Prevent weird truncation errors when serving modified static files
==> web:         +    sendfile off;
==> web:         +
==> web:         +    root /vagrant/htdocs;
==> web:         +    index index.php;
==> web:         +
==> web:         +    location / {
==> web:         +        try_files $uri $uri/ /index.php?$args;
==> web:         +    }
==> web:         +
==> web:         +    location ~ \.php$ {
==> web:         +        include fastcgi_params;
==> web:         +
==> web:         +        fastcgi_param SCRIPT_FILENAME $document_root/index_test.php;
==> web:         +        fastcgi_param APPLICATION_ENV test;
==> web:         +
==> web:         +        fastcgi_pass 127.0.0.1:9000;
==> web:         +
==> web:         +        fastcgi_read_timeout 60m;
==> web:         +    }
==> web:         +
==> web:         +    # X-Accel-Redirect From Remote Servers
==> web:         +    # http://kovyrin.net/2010/07/24/nginx-fu-x-accel-redirect-remote/
==> web:         +    location ~* ^/internal_redirect/(.*?)/(.*) {
==> web:         +        # Do not allow people to mess with this location directly
==> web:         +        # Only internal redirects are allowed
==> web:         +        internal;
==> web:         +
==> web:         +        # Use Google Public DNS as a resolver
==> web:         +        resolver 8.8.8.8;
==> web:         +
==> web:         +        # Extract download url from the request
==> web:         +        set $download_uri $2;
==> web:         +        set $download_host $1;
==> web:         +
==> web:         +        # Compose download url
==> web:         +        set $download_url http://$download_host/$download_uri;
==> web:         +
==> web:         +        # Set download request headers
==> web:         +        proxy_set_header Host $download_host;
==> web:         +        proxy_set_header Authorization '';
==> web:         +
==> web:         +        # The next two lines could be used if your storage
==> web:         +        # backend does not support Content-Disposition
==> web:         +        # headers used to specify file name browsers use
==> web:         +        # when save content to the disk
==> web:         +        proxy_hide_header Content-Disposition;
==> web:         +        add_header Content-Disposition 'attachment; filename="$args"';
==> web:         +
==> web:         +        # Do not touch local disks when proxying
==> web:         +        # content to clients
==> web:         +        proxy_max_temp_file_size 0;
==> web:         +
==> web:         +        # Download the file and send it to client
==> web:         +        proxy_pass $download_url;
==> web:         +    }
==> web:         +}
==> web:         +server {
==> web:         +    listen 80 default_server;
==> web:         +    server_name my_company.dev;
==> web:         +
==> web:         +    client_max_body_size 20M;
==> web:         +
==> web:         +    # Prevent weird truncation errors when serving modified static files
==> web:         +    sendfile off;
==> web:         +
==> web:         +    root /vagrant/htdocs;
==> web:         +    index index.php;
==> web:         +
==> web:         +    location / {
==> web:         +        try_files $uri $uri/ /index.php?$args;
==> web:         +    }
==> web:         +
==> web:         +    location ~ \.php$ {
==> web:         +        include fastcgi_params;
==> web:         +
==> web:         +        fastcgi_param SCRIPT_FILENAME $document_root/index.php;
==> web:         +
==> web:         +        fastcgi_pass 127.0.0.1:9000;
==> web:         +
==> web:         +        fastcgi_read_timeout 60m;
==> web:         +    }
==> web:         +
==> web:         +    # X-Accel-Redirect From Remote Servers
==> web:         +    # http://kovyrin.net/2010/07/24/nginx-fu-x-accel-redirect-remote/
==> web:         +    location ~* ^/internal_redirect/(.*?)/(.*) {
==> web:         +        # Do not allow people to mess with this location directly
==> web:         +        # Only internal redirects are allowed
==> web:         +        internal;
==> web:         +
==> web:         +        # Use Google Public DNS as a resolver
==> web:         +        resolver 8.8.8.8;
==> web:         +
==> web:         +        # Extract download url from the request
==> web:         +        set $download_uri $2;
==> web:         +        set $download_host $1;
==> web:         +
==> web:         +        # Compose download url
==> web:         +        set $download_url http://$download_host/$download_uri;
==> web:         +
==> web:         +        # Set download request headers
==> web:         +        proxy_set_header Host $download_host;
==> web:         +        proxy_set_header Authorization '';
==> web:         +
==> web:         +        # The next two lines could be used if your storage
==> web:         +        # backend does not support Content-Disposition
==> web:         +        # headers used to specify file name browsers use
==> web:         +        # when save content to the disk
==> web:         +        proxy_hide_header Content-Disposition;
==> web:         +        add_header Content-Disposition 'attachment; filename="$args"';
==> web:         +
==> web:         +        # Do not touch local disks when proxying
==> web:         +        # content to clients
==> web:         +        proxy_max_temp_file_size 0;
==> web:         +
==> web:         +        # Download the file and send it to client
==> web:         +        proxy_pass $download_url;
==> web:         +    }
==> web:         +}[2015-09-14T22:18:50+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/nginx/sites-available/my_company.dev] owner changed to 0
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/nginx/sites-available/my_company.dev] group changed to 0
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/nginx/sites-available/my_company.dev] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'[2015-09-14T22:18:50+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * execute[nxensite my_company.dev] action run[2015-09-14T22:18:50+00:00] INFO: Processing execute[nxensite my_company.dev] action run (my_company::local line 37)
==> web: [2015-09-14T22:18:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:50+00:00] INFO: execute[nxensite my_company.dev] ran successfully
==> web:
==> web:     - execute /usr/sbin/nxensite my_company.dev
==> web: [2015-09-14T22:18:50+00:00] INFO: execute[nxensite my_company.dev] not queuing delayed action reload on service[nginx] (delayed), as it's already been queued
==> web:   * template[/etc/default/locale] action create[2015-09-14T22:18:50+00:00] INFO: Processing template[/etc/default/locale] action create (my_company::local line 22)
==> web: [2015-09-14T22:18:50+00:00] DEBUG: template[/etc/default/locale] checksumming file at /etc/default/locale.
==> web: [2015-09-14T22:18:50+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-vy6mbb to compare with e785167cf852db683beab75ae06a4a34d21c4b5ec6ed15dfdc96f97d78bec817
==> web: [2015-09-14T22:18:50+00:00] DEBUG: running: diff -u /etc/default/locale /tmp/chef-rendered-template20150914-1761-vy6mbb
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/default/locale] backed up to /var/chef/backup/etc/default/locale.chef-20150914221850.906696
==> web: [2015-09-14T22:18:50+00:00] DEBUG: reading modes from /etc/default/locale file
==> web: [2015-09-14T22:18:50+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-vy6mbb
==> web: [2015-09-14T22:18:50+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-vy6mbb into place at /etc/default/locale
==> web: [2015-09-14T22:18:50+00:00] INFO: template[/etc/default/locale] updated file contents /etc/default/locale
==> web:
==> web:     - update content in file /etc/default/locale from e78516 to bfa5ef
==> web:         --- /etc/default/locale	2012-09-14 06:02:56.602376179 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-vy6mbb	2015-09-14 22:18:50.899813358 +0000
==> web:         @@ -1,2 +1,2 @@
==> web:         -LC_ALL="en_US"
==> web:         +LANG="en_US.UTF-8"[2015-09-14T22:18:50+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:18:50+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:18:50+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web: Recipe: git::package
==> web:   * git_client[default] action install[2015-09-14T22:18:50+00:00] INFO: Processing git_client[default] action install (git::package line 32)
==> web: [2015-09-14T22:18:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * package[default :create git] action install[2015-09-14T22:18:50+00:00] INFO: Processing package[default :create git] action install (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/git/libraries/provider_git_client_package.rb line 14)
==> web: [2015-09-14T22:18:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:50+00:00] DEBUG: package[default :create git] checking package status for git
==> web: [2015-09-14T22:18:51+00:00] DEBUG: package[default :create git] current version is nil
==> web: [2015-09-14T22:18:51+00:00] DEBUG: package[default :create git] candidate version is 1:1.7.9.5-1ubuntu0.1
==> web:
==> web:     - install version 1:1.7.9.5-1ubuntu0.1 of package git
==> web: Recipe: rbenv::default
==> web:   * package[curl] action install
==> web: [2015-09-14T22:18:56+00:00] INFO: Processing package[curl] action install (rbenv::default line 33)
==> web: [2015-09-14T22:18:56+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[curl] checking package status for curl
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[curl] current version is 7.22.0-3ubuntu4.14
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[curl] candidate version is 7.22.0-3ubuntu4.14
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[curl] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libc6-dev] action install
==> web: [2015-09-14T22:18:56+00:00] INFO: Processing package[libc6-dev] action install (rbenv::default line 44)
==> web: [2015-09-14T22:18:56+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libc6-dev] checking package status for libc6-dev
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libc6-dev] current version is 2.15-0ubuntu10
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libc6-dev] candidate version is 2.15-0ubuntu10.12
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libc6-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[automake] action install
==> web: [2015-09-14T22:18:56+00:00] INFO: Processing package[automake] action install (rbenv::default line 45)
==> web: [2015-09-14T22:18:56+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[automake] checking package status for automake
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[automake] current version is 1:1.11.3-1ubuntu2
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[automake] candidate version is 1:1.11.3-1ubuntu2
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[automake] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libtool] action install
==> web: [2015-09-14T22:18:56+00:00] INFO: Processing package[libtool] action install (rbenv::default line 46)
==> web: [2015-09-14T22:18:56+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libtool] checking package status for libtool
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libtool] current version is nil
==> web: [2015-09-14T22:18:56+00:00] DEBUG: package[libtool] candidate version is 2.4.2-1ubuntu1
==> web:
==> web:     - install version 2.4.2-1ubuntu1 of package libtool
==> web:   * package[libyaml-dev] action install
==> web: [2015-09-14T22:18:58+00:00] INFO: Processing package[libyaml-dev] action install (rbenv::default line 52)
==> web: [2015-09-14T22:18:58+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:58+00:00] DEBUG: package[libyaml-dev] checking package status for libyaml-dev
==> web: [2015-09-14T22:18:58+00:00] DEBUG: package[libyaml-dev] current version is nil
==> web: [2015-09-14T22:18:58+00:00] DEBUG: package[libyaml-dev] candidate version is 0.1.4-2ubuntu0.12.04.4
==> web:
==> web:     - install version 0.1.4-2ubuntu0.12.04.4 of package libyaml-dev
==> web:   * package[zlib1g] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[zlib1g] action install (rbenv::default line 55)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g] checking package status for zlib1g
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g] current version is 1:1.2.3.4.dfsg-3ubuntu4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g] candidate version is 1:1.2.3.4.dfsg-3ubuntu4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[zlib1g-dev] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[zlib1g-dev] action install (rbenv::default line 56)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g-dev] checking package status for zlib1g-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g-dev] current version is 1:1.2.3.4.dfsg-3ubuntu4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g-dev] candidate version is 1:1.2.3.4.dfsg-3ubuntu4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[zlib1g-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[openssl] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[openssl] action install (rbenv::default line 59)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[openssl] checking package status for openssl
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[openssl] current version is 1.0.1-4ubuntu3
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[openssl] candidate version is 1.0.1-4ubuntu5.31
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[openssl] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libssl-dev] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[libssl-dev] action install (rbenv::default line 60)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libssl-dev] checking package status for libssl-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libssl-dev] current version is 1.0.1-4ubuntu5.5
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libssl-dev] candidate version is 1.0.1-4ubuntu5.31
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libssl-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libreadline-dev] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[libreadline-dev] action install (rbenv::default line 63)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libreadline-dev] checking package status for libreadline-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libreadline-dev] current version is 6.2-8
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libreadline-dev] candidate version is 6.2-8
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libreadline-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libxml2-dev] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[libxml2-dev] action install (rbenv::default line 67)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxml2-dev] checking package status for libxml2-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxml2-dev] current version is 2.7.8.dfsg-5.1ubuntu4.11
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxml2-dev] candidate version is 2.7.8.dfsg-5.1ubuntu4.11
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxml2-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[libxslt1-dev] action install[2015-09-14T22:18:59+00:00] INFO: Processing package[libxslt1-dev] action install (rbenv::default line 68)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxslt1-dev] checking package status for libxslt1-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxslt1-dev] current version is 1.1.26-8ubuntu1.3
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxslt1-dev] candidate version is 1.1.26-8ubuntu1.3
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[libxslt1-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[ncurses-dev] action install
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing package[ncurses-dev] action install (rbenv::default line 71)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] checking package status for ncurses-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] current version is nil
==> web: [2015-09-14T22:18:59+00:00] INFO: package[ncurses-dev] is a virtual package, actually acting on package[libncurses5-dev]
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] checking package status for libncurses5-dev
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] current version is 5.9-4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] candidate version is 5.9-4
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[ncurses-dev] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[pkg-config] action install[2015-09-14T22:18:59+00:00] INFO: Processing package[pkg-config] action install (rbenv::default line 74)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[pkg-config] checking package status for pkg-config
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[pkg-config] current version is 0.26-1ubuntu1
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[pkg-config] candidate version is 0.26-1ubuntu1
==> web: [2015-09-14T22:18:59+00:00] DEBUG: package[pkg-config] is already installed - nothing to do
==> web:  (up to date)
==> web:   * group[rbenv] action create[2015-09-14T22:18:59+00:00] INFO: Processing group[rbenv] action create (rbenv::default line 77)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: group[rbenv] group does not exist
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Executing groupadd rbenv
==> web: [2015-09-14T22:18:59+00:00] DEBUG: ---- Begin output of groupadd rbenv ----
==> web: [2015-09-14T22:18:59+00:00] DEBUG: STDOUT:
==> web: [2015-09-14T22:18:59+00:00] DEBUG: STDERR:
==> web: [2015-09-14T22:18:59+00:00] DEBUG: ---- End output of groupadd rbenv ----
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Ran groupadd rbenv returned 0
==> web: [2015-09-14T22:18:59+00:00] DEBUG: group[rbenv] setting group members to: none
==> web: [2015-09-14T22:18:59+00:00] INFO: group[rbenv] created
==> web:
==> web:     - create group[rbenv]
==> web:   * user[rbenv] action create
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing user[rbenv] action create (rbenv::default line 81)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] DEBUG: user[rbenv] user does not exist
==> web: [2015-09-14T22:18:59+00:00] DEBUG: user[rbenv] setting gid to rbenv
==> web: [2015-09-14T22:18:59+00:00] DEBUG: user[rbenv] setting shell to /bin/bash
==> web: [2015-09-14T22:18:59+00:00] DEBUG: user[rbenv] managing the users home directory
==> web: [2015-09-14T22:18:59+00:00] INFO: user[rbenv] created
==> web:
==> web:     - create user user[rbenv]
==> web:   * directory[/opt/rbenv] action create
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing directory[/opt/rbenv] action create (rbenv::default line 88)
==> web: [2015-09-14T22:18:59+00:00] INFO: directory[/opt/rbenv] created directory /opt/rbenv
==> web:
==> web:     - create new directory /opt/rbenv
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:18:59+00:00] INFO: directory[/opt/rbenv] owner changed to 1001
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:18:59+00:00] INFO: directory[/opt/rbenv] group changed to 1003
==> web: [2015-09-14T22:18:59+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:18:59+00:00] INFO: directory[/opt/rbenv] mode changed to 2775
==> web:
==> web:     - change mode from '' to '02775'
==> web:
==> web:     - change owner from '' to 'rbenv'
==> web:
==> web:     - change group from '' to 'rbenv'
==> web: [2015-09-14T22:18:59+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * ruby_block[set HOME for rbenv at 1442268302] action run
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing ruby_block[set HOME for rbenv at 1442268302] action run (rbenv::default line 125)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:18:59+00:00] INFO: ruby_block[set HOME for rbenv at 1442268302] called
==> web:
==> web:     - execute the ruby block set HOME for rbenv at 1442268302
==> web:   * git[/opt/rbenv] action sync
==> web: [2015-09-14T22:18:59+00:00] INFO: Processing git[/opt/rbenv] action sync (rbenv::default line 97)
==> web: [2015-09-14T22:18:59+00:00] DEBUG: git[/opt/rbenv] finding current git revision
==> web: [2015-09-14T22:18:59+00:00] DEBUG: git[/opt/rbenv] resolving remote reference
==> web: [2015-09-14T22:19:00+00:00] INFO: git[/opt/rbenv] cloning repo https://github.com/sstephenson/rbenv.git to /opt/rbenv
==> web:
==> web:     - clone from https://github.com/sstephenson/rbenv.git into /opt/rbenv
==> web: [2015-09-14T22:19:01+00:00] INFO: git[/opt/rbenv] checked out branch: master onto: deploy reference: 9e664b5d27cd7b2bdb94a9ec8ce55c32ebe1ad7a
==> web:
==> web:     - checkout ref 9e664b5d27cd7b2bdb94a9ec8ce55c32ebe1ad7a branch master
==> web: [2015-09-14T22:19:01+00:00] INFO: git[/opt/rbenv] sending create action to template[/etc/profile.d/rbenv.sh] (immediate)
==> web:   * template[/etc/profile.d/rbenv.sh] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing template[/etc/profile.d/rbenv.sh] action create (rbenv::default line 109)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: touching /etc/profile.d/rbenv.sh to create it
==> web: [2015-09-14T22:19:01+00:00] INFO: template[/etc/profile.d/rbenv.sh] created file /etc/profile.d/rbenv.sh
==> web:
==> web:     - create new file /etc/profile.d/rbenv.sh
==> web: [2015-09-14T22:19:01+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1tkmsjm to compare with
==> web: [2015-09-14T22:19:01+00:00] DEBUG: running: diff -u /etc/profile.d/rbenv.sh /tmp/chef-rendered-template20150914-1761-1tkmsjm
==> web: [2015-09-14T22:19:01+00:00] DEBUG: reading modes from /etc/profile.d/rbenv.sh file
==> web: [2015-09-14T22:19:01+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1tkmsjm
==> web: [2015-09-14T22:19:01+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1tkmsjm into place at /etc/profile.d/rbenv.sh
==> web: [2015-09-14T22:19:01+00:00] INFO: template[/etc/profile.d/rbenv.sh] updated file contents /etc/profile.d/rbenv.sh
==> web:
==> web:     - update content in file /etc/profile.d/rbenv.sh from none to 88c130
==> web:
==> web:         --- /etc/profile.d/rbenv.sh	2015-09-14 22:19:01.055793303 +0000
==> web:
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1tkmsjm	2015-09-14 22:19:01.059793295 +0000
==> web:         @@ -1 +1,17 @@
==> web:         +export RBENV_ROOT=/opt/rbenv
==> web:
==> web:         +export PATH=$RBENV_ROOT/bin:/opt/rbenv/plugins/ruby_build/bin:$PATH
==> web:         +
==> web:         +case $SHELL in
==> web:         +*/zsh)
==> web:         +  source $RBENV_ROOT/completions/rbenv.zsh
==> web:         +  ;;
==> web:         +*/bash)
==> web:         +  source $RBENV_ROOT/completions/rbenv.bash
==> web:         +  ;;
==> web:         +*)
==> web:         +  source $RBENV_ROOT/completions/rbenv.bash
==> web:         +  ;;
==> web:         +esac
==> web:         +
==> web:         +eval "$(rbenv init -)"
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] INFO: template[/etc/profile.d/rbenv.sh] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web: [2015-09-14T22:19:01+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:19:01+00:00] INFO: template[/etc/profile.d/rbenv.sh] sending create action to ruby_block[initialize_rbenv] (immediate)
==> web:   * ruby_block[initialize_rbenv] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing ruby_block[initialize_rbenv] action create (rbenv::default line 120)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:19:01+00:00] INFO: ruby_block[initialize_rbenv] called
==> web:
==> web:     - execute the ruby block initialize_rbenv
==> web:   * ruby_block[unset HOME for rbenv 1442268302] action run
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing ruby_block[unset HOME for rbenv 1442268302] action run (rbenv::default line 139)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:19:01+00:00] INFO: ruby_block[unset HOME for rbenv 1442268302] called
==> web:
==> web:     - execute the ruby block unset HOME for rbenv 1442268302
==> web:   * template[/etc/profile.d/rbenv.sh] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing template[/etc/profile.d/rbenv.sh] action create (rbenv::default line 109)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: template[/etc/profile.d/rbenv.sh] checksumming file at /etc/profile.d/rbenv.sh.
==> web: [2015-09-14T22:19:01+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-jksppy to compare with 88c130cce1f5c70a347d0e3b89346555be14a84bfa6430f68c2567d04b420503
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web:  (up to date)
==> web:   * ruby_block[initialize_rbenv] action nothing
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing ruby_block[initialize_rbenv] action nothing (rbenv::default line 120)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: Skipping ruby_block[initialize_rbenv] due to action :nothing
==> web:   * directory[/opt/rbenv/shims] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing directory[/opt/rbenv/shims] action create (rbenv::default line 133)
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/shims] created directory /opt/rbenv/shims
==> web:
==> web:     - create new directory /opt/rbenv/shims
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/shims] owner changed to 1001
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/shims] group changed to 1003
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/shims] mode changed to 2775
==> web:
==> web:     - change mode from '' to '02775'
==> web:     - change owner from '' to 'rbenv'
==> web:     - change group from '' to 'rbenv'
==> web: [2015-09-14T22:19:01+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * directory[/opt/rbenv/versions] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing directory[/opt/rbenv/versions] action create (rbenv::default line 133)
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/versions] created directory /opt/rbenv/versions
==> web:
==> web:     - create new directory /opt/rbenv/versions
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/versions] owner changed to 1001
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/versions] group changed to 1003
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/versions] mode changed to 2775
==> web:
==> web:     - change mode from '' to '02775'
==> web:
==> web:     - change owner from '' to 'rbenv'
==> web:     - change group from '' to 'rbenv'
==> web: [2015-09-14T22:19:01+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/opt/rbenv/plugins] action create
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing directory[/opt/rbenv/plugins] action create (rbenv::default line 133)
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/plugins] created directory /opt/rbenv/plugins
==> web:
==> web:     - create new directory /opt/rbenv/plugins
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/plugins] owner changed to 1001
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/plugins] group changed to 1003
==> web: [2015-09-14T22:19:01+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:19:01+00:00] INFO: directory[/opt/rbenv/plugins] mode changed to 2775
==> web:
==> web:     - change mode from '' to '02775'
==> web:
==> web:     - change owner from '' to 'rbenv'
==> web:     - change group from '' to 'rbenv'
==> web: [2015-09-14T22:19:01+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: rbenv::ruby_build
==> web:   * ruby_block[set HOME for rbenv at 1442268302] action run
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing ruby_block[set HOME for rbenv at 1442268302] action run (rbenv::ruby_build line 125)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:19:01+00:00] INFO: ruby_block[set HOME for rbenv at 1442268302] called
==> web:
==> web:     - execute the ruby block set HOME for rbenv at 1442268302
==> web:   * git[/opt/rbenv/plugins/ruby_build] action sync
==> web: [2015-09-14T22:19:01+00:00] INFO: Processing git[/opt/rbenv/plugins/ruby_build] action sync (rbenv::ruby_build line 26)
==> web: [2015-09-14T22:19:01+00:00] DEBUG: git[/opt/rbenv/plugins/ruby_build] finding current git revision
==> web: [2015-09-14T22:19:01+00:00] DEBUG: git[/opt/rbenv/plugins/ruby_build] resolving remote reference
==> web: [2015-09-14T22:19:01+00:00] INFO: git[/opt/rbenv/plugins/ruby_build] cloning repo https://github.com/sstephenson/ruby-build.git to /opt/rbenv/plugins/ruby_build
==> web:
==> web:     - clone from https://github.com/sstephenson/ruby-build.git into /opt/rbenv/plugins/ruby_build
==> web: [2015-09-14T22:19:02+00:00] INFO: git[/opt/rbenv/plugins/ruby_build] checked out branch: master onto: deploy reference: 8d6ff298006994334ac04b1efed098851c63cf4c
==> web:
==> web:     - checkout ref 8d6ff298006994334ac04b1efed098851c63cf4c branch master
==> web:   * ruby_block[unset HOME for rbenv 1442268302] action run
==> web: [2015-09-14T22:19:02+00:00] INFO: Processing ruby_block[unset HOME for rbenv 1442268302] action run (rbenv::ruby_build line 139)
==> web: [2015-09-14T22:19:02+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:19:02+00:00] INFO: ruby_block[unset HOME for rbenv 1442268302] called
==> web:
==> web:     - execute the ruby block unset HOME for rbenv 1442268302
==> web: Recipe: my_company::local
==> web:   * rbenv_ruby[2.0.0-p481] action install
==> web: [2015-09-14T22:19:02+00:00] INFO: Processing rbenv_ruby[2.0.0-p481] action install (my_company::local line 32)
==> web: [2015-09-14T22:19:02+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:19:02+00:00] INFO: rbenv_ruby[2.0.0-p481] (version 2.0.0-p481) is building, this may take a while...
==> web: [2015-09-14T22:22:39+00:00] DEBUG: rbenv_ruby[2.0.0-p481] (version 2.0.0-p481) build time was 3.6298388437 minutes.
==> web: [2015-09-14T22:22:41+00:00] INFO: Setting rbenv_ruby[2.0.0-p481] (version 2.0.0-p481) as the rbenv global version
==> web:   * gem_package[bundler] action install
==> web: [2015-09-14T22:22:41+00:00] INFO: Processing gem_package[bundler] action install (my_company::local line 36)
==> web: [2015-09-14T22:22:41+00:00] DEBUG: gem_package[bundler] detected omnibus installation in /opt/chef/embedded/bin
==> web: [2015-09-14T22:22:41+00:00] DEBUG: gem_package[bundler] searching for 'gem' binary in path: /opt/rbenv/bin:/opt/rbenv/shims:/opt/rbenv/plugins/ruby_build/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/vagrant_ruby/bin:/opt/chef/embedded/bin:/opt/chef/embedded/bin
==> web: [2015-09-14T22:22:41+00:00] DEBUG: gem_package[bundler] using gem '/opt/rbenv/shims/gem'
==> web: [2015-09-14T22:22:42+00:00] DEBUG: gem_package[bundler] no installed version found for bundler (= 1.10.6)
==> web:
==> web:     - install version 1.10.6 of package bundler
==> web: [2015-09-14T22:22:47+00:00] DEBUG: gem_package[bundler] resetting gem environment to default
==> web:   * execute[bundle install] action run
==> web: [2015-09-14T22:22:47+00:00] INFO: Processing execute[bundle install] action run (my_company::local line 41)
==> web: [2015-09-14T22:22:47+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:23:50+00:00] INFO: execute[bundle install] ran successfully
==> web:
==> web:     - execute bundle install
==> web:   * composer_project[/vagrant] action install
==> web: [2015-09-14T22:23:50+00:00] INFO: Processing composer_project[/vagrant] action install (my_company::local line 49)
==> web: [2015-09-14T22:23:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * execute[install-composer-for-project] action run
==> web: [2015-09-14T22:23:50+00:00] INFO: Processing execute[install-composer-for-project] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/composer/providers/project.rb line 36)
==> web: [2015-09-14T22:23:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:23:51+00:00] INFO: execute[install-composer-for-project] ran successfully
==> web:
==> web:     - execute /usr/local/bin/composer install --no-interaction --no-ansi  --dev   --no-autoloader
==> web: Recipe: my_company::xdebug
==> web:   * git[/var/chef/cache/xdebug] action sync
==> web: [2015-09-14T22:23:51+00:00] INFO: Processing git[/var/chef/cache/xdebug] action sync (my_company::xdebug line 3)
==> web: [2015-09-14T22:23:51+00:00] DEBUG: git[/var/chef/cache/xdebug] finding current git revision
==> web: [2015-09-14T22:23:51+00:00] DEBUG: git[/var/chef/cache/xdebug] resolving remote reference
==> web: [2015-09-14T22:23:51+00:00] INFO: git[/var/chef/cache/xdebug] cloning repo git://github.com/xdebug/xdebug.git to /var/chef/cache/xdebug
==> web:
==> web:     - clone from git://github.com/xdebug/xdebug.git into /var/chef/cache/xdebug
==> web: [2015-09-14T22:24:08+00:00] INFO: git[/var/chef/cache/xdebug] checked out branch: XDEBUG_2_2_5 onto: deploy reference: cf10311a0dc820237ed4296e434754429698a565
==> web:
==> web:     - checkout ref cf10311a0dc820237ed4296e434754429698a565 branch XDEBUG_2_2_5
==> web:   * execute[php-xdebug-phpize] action run
==> web: [2015-09-14T22:24:08+00:00] INFO: Processing execute[php-xdebug-phpize] action run (my_company::xdebug line 9)
==> web: [2015-09-14T22:24:08+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:08+00:00] INFO: execute[php-xdebug-phpize] ran successfully
==> web:
==> web:     - execute phpize
==> web:   * directory[/usr/lib/php5] action create
==> web: [2015-09-14T22:24:08+00:00] INFO: Processing directory[/usr/lib/php5] action create (my_company::xdebug line 16)
==> web: [2015-09-14T22:24:08+00:00] INFO: directory[/usr/lib/php5] created directory /usr/lib/php5
==> web:
==> web:     - create new directory /usr/lib/php5
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:08+00:00] INFO: directory[/usr/lib/php5] owner changed to 0
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:08+00:00] INFO: directory[/usr/lib/php5] group changed to 0
==> web: [2015-09-14T22:24:08+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:08+00:00] INFO: directory[/usr/lib/php5] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:24:08+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * execute[php-xdebug-configure] action run
==> web: [2015-09-14T22:24:08+00:00] INFO: Processing execute[php-xdebug-configure] action run (my_company::xdebug line 24)
==> web: [2015-09-14T22:24:08+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:10+00:00] INFO: execute[php-xdebug-configure] ran successfully
==> web:
==> web:     - execute ./configure --enable-xdebug
==> web:   * execute[php-xdebug-build] action run
==> web: [2015-09-14T22:24:10+00:00] INFO: Processing execute[php-xdebug-build] action run (my_company::xdebug line 31)
==> web: [2015-09-14T22:24:10+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:16+00:00] INFO: execute[php-xdebug-build] ran successfully
==> web:
==> web:     - execute make
==> web:
==> web: [2015-09-14T22:24:16+00:00] INFO: execute[php-xdebug-build] sending run action to execute[php-xdebug-install] (immediate)
==> web:   * execute[php-xdebug-install] action run[2015-09-14T22:24:16+00:00] INFO: Processing execute[php-xdebug-install] action run (my_company::xdebug line 39)
==> web: [2015-09-14T22:24:16+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:16+00:00] INFO: execute[php-xdebug-install] ran successfully
==> web:
==> web:     - execute cp modules/xdebug.so /usr/lib/php5/xdebug.so
==> web:   * execute[php-xdebug-install] action run
==> web: [2015-09-14T22:24:16+00:00] INFO: Processing execute[php-xdebug-install] action run (my_company::xdebug line 39)
==> web: [2015-09-14T22:24:16+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:16+00:00] INFO: execute[php-xdebug-install] ran successfully
==> web:
==> web:     - execute cp modules/xdebug.so /usr/lib/php5/xdebug.so
==> web:   * template[/etc/php5/conf.d/xdebug.ini] action create
==> web: [2015-09-14T22:24:16+00:00] INFO: Processing template[/etc/php5/conf.d/xdebug.ini] action create (my_company::xdebug line 45)
==> web: [2015-09-14T22:24:16+00:00] DEBUG: touching /etc/php5/conf.d/xdebug.ini to create it
==> web: [2015-09-14T22:24:16+00:00] INFO: template[/etc/php5/conf.d/xdebug.ini] created file /etc/php5/conf.d/xdebug.ini
==> web:
==> web:     - create new file /etc/php5/conf.d/xdebug.ini
==> web: [2015-09-14T22:24:16+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-md08g9 to compare with
==> web: [2015-09-14T22:24:16+00:00] DEBUG: running: diff -u /etc/php5/conf.d/xdebug.ini /tmp/chef-rendered-template20150914-1761-md08g9
==> web: [2015-09-14T22:24:16+00:00] DEBUG: reading modes from /etc/php5/conf.d/xdebug.ini file
==> web: [2015-09-14T22:24:16+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-md08g9
==> web: [2015-09-14T22:24:16+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-md08g9 into place at /etc/php5/conf.d/xdebug.ini
==> web: [2015-09-14T22:24:16+00:00] INFO: template[/etc/php5/conf.d/xdebug.ini] updated file contents /etc/php5/conf.d/xdebug.ini
==> web:
==> web:     - update content in file /etc/php5/conf.d/xdebug.ini from none to 24846b
==> web:         --- /etc/php5/conf.d/xdebug.ini	2015-09-14 22:24:16.190277213 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-md08g9	2015-09-14 22:24:16.194276692 +0000
==> web:         @@ -1 +1,11 @@
==> web:         +; configuration for php xdebug module
==> web:         +zend_extension=/usr/lib/php5/xdebug.so
==> web:         +
==> web:         +xdebug.remote_host = 10.0.2.2
==> web:         +xdebug.remote_port = 9000
==> web:         +xdebug.idekey = "console"
==> web:         +xdebug.remote_autostart = 1
==> web:         +xdebug.remote_connect_back = 1
==> web:         +xdebug.remote_enable = 1
==> web:         +xdebug.profiler = 1
==> web: [2015-09-14T22:24:16+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:24:16+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:24:16+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:24:16+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: [2015-09-14T22:24:16+00:00] INFO: template[/etc/php5/conf.d/xdebug.ini] not queuing delayed action restart on service[php-fpm] (delayed), as it's already been queued
==> web: Recipe: my_company::ffmpeg_install
==> web:   * package[ffmpeg] action install
==> web: [2015-09-14T22:24:16+00:00] INFO: Processing package[ffmpeg] action install (my_company::ffmpeg_install line 10)
==> web: [2015-09-14T22:24:16+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:16+00:00] DEBUG: package[ffmpeg] checking package status for ffmpeg
==> web: [2015-09-14T22:24:16+00:00] DEBUG: package[ffmpeg] current version is nil
==> web: [2015-09-14T22:24:16+00:00] DEBUG: package[ffmpeg] candidate version is 4:0.8.17-0ubuntu0.12.04.1
==> web:
==> web:     - install version 4:0.8.17-0ubuntu0.12.04.1 of package ffmpeg
==> web: Recipe: memcached::default
==> web:   * package[memcached] action install
==> web: [2015-09-14T22:24:21+00:00] INFO: Processing package[memcached] action install (memcached::default line 23)
==> web: [2015-09-14T22:24:21+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:21+00:00] DEBUG: package[memcached] checking package status for memcached
==> web: [2015-09-14T22:24:21+00:00] DEBUG: package[memcached] current version is nil
==> web: [2015-09-14T22:24:21+00:00] DEBUG: package[memcached] candidate version is 1.4.13-0ubuntu2.1
==> web:
==> web:     - install version 1.4.13-0ubuntu2.1 of package memcached
==> web:   * package[libmemcache-dev] action install
==> web: [2015-09-14T22:24:23+00:00] INFO: Processing package[libmemcache-dev] action install (memcached::default line 25)
==> web: [2015-09-14T22:24:23+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:23+00:00] DEBUG: package[libmemcache-dev] checking package status for libmemcache-dev
==> web: [2015-09-14T22:24:23+00:00] DEBUG: package[libmemcache-dev] current version is nil
==> web: [2015-09-14T22:24:23+00:00] DEBUG: package[libmemcache-dev] candidate version is 1.4.0.rc2-1
==> web:
==> web:     - install version 1.4.0.rc2-1 of package libmemcache-dev
==> web:   * service[memcached] action enable
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing service[memcached] action enable (memcached::default line 42)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] supports status, running
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] is running
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:24:25+00:00] DEBUG: service[memcached] already enabled - nothing to do
==> web:  (up to date)
==> web:   * template[/etc/memcached.conf] action create[2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/memcached.conf] action create (memcached::default line 75)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: template[/etc/memcached.conf] checksumming file at /etc/memcached.conf.
==> web: [2015-09-14T22:24:25+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-12ujm9r to compare with 96877242b2d64760664e01b9480b9fc83c124cd2045a2faa6ca2bc8b181348d2
==> web: [2015-09-14T22:24:25+00:00] DEBUG: running: diff -u /etc/memcached.conf /tmp/chef-rendered-template20150914-1761-12ujm9r
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/memcached.conf] backed up to /var/chef/backup/etc/memcached.conf.chef-20150914222425.519963
==> web: [2015-09-14T22:24:25+00:00] DEBUG: reading modes from /etc/memcached.conf file
==> web: [2015-09-14T22:24:25+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-12ujm9r
==> web: [2015-09-14T22:24:25+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-12ujm9r into place at /etc/memcached.conf
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/memcached.conf] updated file contents /etc/memcached.conf
==> web:
==> web:     - update content in file /etc/memcached.conf from 968772 to 3eee5f
==> web:         --- /etc/memcached.conf	2015-09-14 22:24:23.353350548 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-12ujm9r	2015-09-14 22:24:25.513074952 +0000
==> web:         @@ -1,7 +1,10 @@
==> web:         +#
==> web:         +# Configured by Chef. Local changes will be lost.
==> web:         +#
==> web:          # memcached default config file
==> web:          # 2003 - Jay Bonci <jaybonci@debian.org>
==> web:          # This configuration file is read by the start-memcached script provided as
==> web:         -# part of the Debian GNU/Linux distribution.
==> web:         +# part of the Debian GNU/Linux distribution.
==> web:
==> web:          # Run memcached as a daemon. This command is implied, and is not needed for the
==> web:          # daemon to run. See the README.Debian that comes with this package for more
==> web:         @@ -12,7 +15,7 @@
==> web:          logfile /var/log/memcached.log
==> web:
==> web:          # Be verbose
==> web:         -# -v
==> web:         +-v
==> web:
==> web:          # Be even more verbose (print client commands as well)
==> web:          # -vv
==> web:         @@ -20,14 +23,15 @@
==> web:          # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
==> web:          # Note that the daemon will grow to this size, but does not start out holding this much
==> web:          # memory
==> web:         --m 64
==> web:         +-m 48
==> web:
==> web:          # Default connection port is 11211
==> web:         --p 11211
==> web:         +-p 11211
==> web:         +-U 11211
==> web:
==> web:          # Run the daemon as root. The start-memcached will default to running as root if no
==> web:          # -u command is present in this config file
==> web:         --u memcache
==> web:         +-u nobody
==> web:
==> web:          # Specify which IP address to listen on. The default is to listen on all IP addresses
==> web:          # This parameter is one of the only security measures that memcached has, so make sure
==> web:         @@ -35,7 +39,7 @@
==> web:          -l 127.0.0.1
==> web:
==> web:          # Limit the number of simultaneous incoming connections. The daemon default is 1024
==> web:         -# -c 1024
==> web:         +-c 1024
==> web:
==> web:          # Lock down all paged memory. Consult with the README and homepage before you do this
==> web:          # -k
==> web:         @@ -45,4 +49,7 @@
==> web:
==> web:          # Maximize core file limit
==> web:          # -r
==> web:         +
==> web:         +# Max object size
==> web:         +-I 1m
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_mode == current_mode, not updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: redisio::default
==> web:   * package[tar] action install
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing package[tar] action install (redisio::default line 23)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[tar] checking package status for tar
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[tar] current version is 1.26-4ubuntu1
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[tar] candidate version is 1.26-4ubuntu1
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[tar] is already installed - nothing to do
==> web:  (up to date)
==> web:   * package[build-essential] action install
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing package[build-essential] action install (redisio::default line 23)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[build-essential] checking package status for build-essential
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[build-essential] current version is 11.5ubuntu2.1
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[build-essential] candidate version is 11.5ubuntu2.1
==> web: [2015-09-14T22:24:25+00:00] DEBUG: package[build-essential] is already installed - nothing to do
==> web:  (up to date)
==> web: Recipe: ulimit::default
==> web:   * template[/etc/pam.d/su] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/pam.d/su] action create (ulimit::default line 22)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: template[/etc/pam.d/su] checksumming file at /etc/pam.d/su.
==> web: [2015-09-14T22:24:25+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-130c4gr to compare with 57b3648d47b8aae1e3a220778c1aab5716940255021edde4b4def1fa43a84549
==> web: [2015-09-14T22:24:25+00:00] DEBUG: running: diff -u /etc/pam.d/su /tmp/chef-rendered-template20150914-1761-130c4gr
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/pam.d/su] backed up to /var/chef/backup/etc/pam.d/su.chef-20150914222425.676682
==> web: [2015-09-14T22:24:25+00:00] DEBUG: reading modes from /etc/pam.d/su file
==> web: [2015-09-14T22:24:25+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-130c4gr
==> web: [2015-09-14T22:24:25+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-130c4gr into place at /etc/pam.d/su
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/pam.d/su] updated file contents /etc/pam.d/su
==> web:
==> web:     - update content in file /etc/pam.d/su from 57b364 to 3f3c0d
==> web:         --- /etc/pam.d/su	2012-04-09 02:29:47.000000000 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-130c4gr	2015-09-14 22:24:25.669055110 +0000
==> web:         @@ -1,6 +1,8 @@
==> web:          #
==> web:          # The PAM configuration file for the Shadow `su' service
==> web:          #
==> web:         +# This file modified by Chef to enable ulimit switching with `su`
==> web:         +#
==> web:
==> web:          # This allows root to su without passwords (normal operation)
==> web:          auth       sufficient pam_rootok.so
==> web:         @@ -50,7 +52,7 @@
==> web:          # Sets up user limits, please uncomment and read /etc/security/limits.conf
==> web:          # to enable this functionality.
==> web:
==> web:          # (Replaces the use of /etc/limits in old login)
==> web:         -# session    required   pam_limits.so
==> web:
==> web:         +session    required   pam_limits.so
==> web:
==> web:          # The standard Unix authentication modules, used with
==> web:          # NIS (man nsswitch) as well as normal /etc/passwd and
==> web:         @@ -58,6 +60,5 @@
==> web:          @include common-auth
==> web:          @include common-account
==> web:          @include common-session
==> web:         -
==> web:
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web: Recipe: redisio::install
==> web:   * redisio_install[redis-servers] action run
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing redisio_install[redis-servers] action run (redisio::install line 30)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:25+00:00] INFO: Installing Redis 2.6.17 from source
==> web: [2015-09-14T22:24:25+00:00] INFO: Downloading redis tarball from http://download.redis.io/releases//redis-2.6.17.tar.gz
==> web: Recipe: <Dynamically Defined Resource>
==> web:   * user[redis] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing user[redis] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 97)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:25+00:00] DEBUG: user[redis] user does not exist
==> web: [2015-09-14T22:24:25+00:00] DEBUG: user[redis] setting comment to Redis service account
==> web: [2015-09-14T22:24:25+00:00] DEBUG: user[redis] setting shell to /bin/false
==> web: [2015-09-14T22:24:25+00:00] DEBUG: user[redis] managing the users home directory
==> web: [2015-09-14T22:24:25+00:00] INFO: user[redis] created
==> web:
==> web:     - create user user[redis]
==> web:   * directory[/etc/redis] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing directory[/etc/redis] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 105)
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/etc/redis] created directory /etc/redis
==> web:
==> web:     - create new directory /etc/redis
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/etc/redis] owner changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/etc/redis] group changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/etc/redis] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:
==> web:   * directory[/var/lib/redis] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing directory[/var/lib/redis] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 113)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_uid == current_uid, not updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_gid == current_gid, not updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found target_mode != current_mode, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/var/lib/redis] mode changed to 775
==> web:
==> web:     - change mode from '0755' to '0775'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[/var/run/redis/6379] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing directory[/var/run/redis/6379] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 121)
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/var/run/redis/6379] created directory /var/run/redis/6379
==> web:
==> web:     - create new directory /var/run/redis/6379
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/var/run/redis/6379] owner changed to 998
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/var/run/redis/6379] group changed to 998
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: directory[/var/run/redis/6379] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:
==> web:     - change owner from '' to 'redis'
==> web:     - change group from '' to 'redis'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * directory[.] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing directory[.] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 129)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Skipping directory[.] due to only_if ruby block
==> web:   * file[/var/lib/redis/appendonly-6379.aof] action create[2015-09-14T22:24:25+00:00] INFO: Processing file[/var/lib/redis/appendonly-6379.aof] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 149)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Skipping file[/var/lib/redis/appendonly-6379.aof] due to only_if ruby block
==> web:   * file[/var/lib/redis/dump-6379.rdb] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing file[/var/lib/redis/dump-6379.rdb] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 156)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Skipping file[/var/lib/redis/dump-6379.rdb] due to only_if ruby block
==> web:   * template[/etc/security/limits.d/redis_limits.conf] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/security/limits.d/redis_limits.conf] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/ulimit/definitions/user_ulimit.rb line 13)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: touching /etc/security/limits.d/redis_limits.conf to create it
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/security/limits.d/redis_limits.conf] created file /etc/security/limits.d/redis_limits.conf
==> web:
==> web:     - create new file /etc/security/limits.d/redis_limits.conf
==> web: [2015-09-14T22:24:25+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1a25bey to compare with
==> web: [2015-09-14T22:24:25+00:00] DEBUG: running: diff -u /etc/security/limits.d/redis_limits.conf /tmp/chef-rendered-template20150914-1761-1a25bey
==> web: [2015-09-14T22:24:25+00:00] DEBUG: reading modes from /etc/security/limits.d/redis_limits.conf file
==> web: [2015-09-14T22:24:25+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1a25bey
==> web: [2015-09-14T22:24:25+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1a25bey into place at /etc/security/limits.d/redis_limits.conf
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/security/limits.d/redis_limits.conf] updated file contents /etc/security/limits.d/redis_limits.conf
==> web:
==> web:     - update content in file /etc/security/limits.d/redis_limits.conf from none to 9e616d
==> web:         --- /etc/security/limits.d/redis_limits.conf	2015-09-14 22:24:25.785040356 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1a25bey	2015-09-14 22:24:25.785040356 +0000
==> web:         @@ -1 +1,7 @@
==> web:         +# Limits settings for redis
==> web:         +
==> web:         +redis - nofile 10032
==> web:         +
==> web:         +
==> web:         +
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/security/limits.d/redis_limits.conf] owner changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/security/limits.d/redis_limits.conf] group changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/security/limits.d/redis_limits.conf] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/redis/6379.conf] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/redis/6379.conf] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 170)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: touching /etc/redis/6379.conf to create it
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/redis/6379.conf] created file /etc/redis/6379.conf
==> web:
==> web:     - create new file /etc/redis/6379.conf
==> web: [2015-09-14T22:24:25+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-1u7kilx to compare with
==> web: [2015-09-14T22:24:25+00:00] DEBUG: running: diff -u /etc/redis/6379.conf /tmp/chef-rendered-template20150914-1761-1u7kilx
==> web: [2015-09-14T22:24:25+00:00] DEBUG: reading modes from /etc/redis/6379.conf file
==> web: [2015-09-14T22:24:25+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-1u7kilx
==> web: [2015-09-14T22:24:25+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-1u7kilx into place at /etc/redis/6379.conf
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/redis/6379.conf] updated file contents /etc/redis/6379.conf
==> web:
==> web:     - update content in file /etc/redis/6379.conf from none to 7f24f1
==> web:         --- /etc/redis/6379.conf	2015-09-14 22:24:25.813036794 +0000
==> web:         +++ /tmp/chef-rendered-template20150914-1761-1u7kilx	2015-09-14 22:24:25.817036285 +0000
==> web:         @@ -1 +1,440 @@
==> web:         +# Redis configuration file example
==> web:         +
==> web:         +# Note on units: when memory size is needed, it is possible to specifiy
==> web:         +# it in the usual form of 1k 5GB 4M and so forth:
==> web:         +#
==> web:         +# 1k => 1000 bytes
==> web:         +# 1kb => 1024 bytes
==> web:         +# 1m => 1000000 bytes
==> web:         +# 1mb => 1024*1024 bytes
==> web:         +# 1g => 1000000000 bytes
==> web:         +# 1gb => 1024*1024*1024 bytes
==> web:         +#
==> web:         +# units are case insensitive so 1GB 1Gb 1gB are all the same.
==> web:         +
==> web:         +# By default Redis does not run as a daemon. Use 'yes' if you need it.
==> web:         +# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
==> web:         +daemonize yes
==> web:         +
==> web:         +# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
==> web:
==> web:         +# default. You can specify a custom pid file location here.
==> web:         +pidfile /var/run/redis/6379/redis_6379.pid
==> web:         +
==> web:         +# Accept connections on the specified port, default is 6379.
==> web:         +# If port 0 is specified Redis will not listen on a TCP socket.
==> web:         +port 6379
==> web:         +
==> web:         +# If you want you can bind a single interface, if the bind option is not
==> web:
==> web:         +# specified all the interfaces will listen for incoming connections.
==> web:         +#
==> web:         +# bind 127.0.0.1
==> web:         +
==> web:         +# Specify the path for the unix socket that will be used to listen for
==> web:         +# incoming connections. There is no default, so Redis will not listen
==> web:         +# on a unix socket when not specified.
==> web:         +#
==> web:         +# unixsocket /tmp/redis.sock
==> web:         +# unixsocketperm 755
==> web:         +
==> web:         +
==> web:         +
==> web:         +# Close the connection after a client is idle for N seconds (0 to disable)
==> web:         +timeout 0
==> web:         +
==> web:         +# Set server verbosity to 'debug'
==> web:         +# it can be one of:
==> web:         +# debug (a lot of information, useful for development/testing)
==> web:         +# verbose (many rarely useful info, but not a mess like the debug level)
==> web:         +# notice (moderately verbose, what you want in production probably)
==> web:         +# warning (only very important / critical messages are logged)
==> web:         +loglevel verbose
==> web:         +
==> web:         +# Specify the log file name. Also 'stdout' can be used to force
==> web:         +# Redis to log on the standard output. Note that if you use standard
==> web:         +# output for logging but daemonize, logs will be sent to /dev/null
==> web:         +#
==> web:         +# In version of redis 2.8 and higher to log to stdout use the empty
==> web:         +# string instead of "stdout"
==> web:         +#
==> web:         +# logfile stdout
==> web:         +
==> web:
==> web:         +
==> web:
==> web:         +# To enable logging to the system logger, just set 'syslog-enabled' to yes,
==> web:         +# and optionally update the other syslog parameters to suit your needs.
==> web:         +syslog-enabled yes
==> web:         +
==> web:         +# Specify the syslog identity.
==> web:         +syslog-ident redis-6379
==> web:         +
==> web:         +# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
==> web:         +syslog-facility local0
==> web:         +
==> web:         +# Set the number of databases. The default database is DB 0, you can select
==> web:         +# a different one on a per-connection basis using SELECT <dbid> where
==> web:         +# dbid is a number between 0 and 'databases'-1
==> web:         +databases 16
==> web:         +
==> web:         +################################ SNAPSHOTTING  #################################
==> web:         +#
==> web:         +# Save the DB on disk:
==> web:         +#
==> web:         +#   save <seconds> <changes>
==> web:         +#
==> web:         +#   Will save the DB if both the given number of seconds and the given
==> web:         +#   number of write operations against the DB occurred.
==> web:         +#
==> web:         +#   In the example below the behaviour will be to save:
==> web:         +#   after 900 sec (15 min) if at least 1 key changed
==> web:         +#   after 300 sec (5 min) if at least 10 keys changed
==> web:         +#   after 60 sec if at least 10000 keys changed
==> web:         +#
==> web:         +#   Note: you can disable saving at all commenting all the "save" lines.
==> web:         +
==> web:         +#save 900 1
==> web:         +#save 300 10
==> web:         +#save 60 10000
==> web:
==> web:         +
==> web:         +
==> web:         +    save 900 1
==> web:         +    save 300 10
==> web:         +    save 60 10000
==> web:         +
==> web:         +# Compress string objects using LZF when dump .rdb databases?
==> web:         +# For default that's set to 'yes' as it's almost always a win.
==> web:
==> web:         +# If you want to save some CPU in the saving child set it to 'no' but
==> web:         +# the dataset will likely be bigger if you have compressible values or keys.
==> web:         +rdbcompression yes
==> web:         +
==> web:         +# The filename where to dump the DB
==> web:         +dbfilename dump-6379.rdb
==> web:         +
==> web:         +# The working directory.
==> web:         +#
==> web:         +# The DB will be written inside this directory, with the filename specified
==> web:         +# above using the 'dbfilename' configuration directive.
==> web:         +#
==> web:         +# Also the Append Only File will be created inside this directory.
==> web:         +#
==> web:         +# Note that you must specify a directory here, not a file name.
==> web:         +dir /var/lib/redis
==> web:         +
==> web:         +################################# REPLICATION #################################
==> web:         +
==> web:         +# Master-Slave replication. Use slaveof to make a Redis instance a copy of
==> web:         +# another Redis server. Note that the configuration is local to the slave
==> web:         +# so for example it is possible to configure the slave to save the DB with a
==> web:         +# different interval, or to listen to another port, and so on.
==> web:         +#
==> web:         +# slaveof <ip> <port>
==> web:         +
==> web:         +
==> web:         +# If the master is password protected (using the "requirepass" configuration
==> web:         +# directive below) it is possible to tell the slave to authenticate before
==> web:         +# starting the replication synchronization process, otherwise the master will
==> web:         +# refuse the slave request.
==> web:         +#
==> web:         +# masterauth <master-password>
==> web:         +
==> web:         +
==> web:         +# When a slave lost the connection with the master, or when the replication
==> web:         +# is still in progress, the slave can act in two different ways:
==> web:         +#
==> web:         +# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
==> web:         +#    still reply to client requests, possibly with out of data data, or the
==> web:         +#    data set may just be empty if this is the first synchronization.
==> web:         +#
==> web:         +# 2) if slave-serve-stale data is set to 'no' the slave will reply with
==> web:         +#    an error "SYNC with master in progress" to all the kind of commands
==> web:         +#    but to INFO and SLAVEOF.
==> web:         +#
==> web:         +slave-serve-stale-data yes
==> web:         +
==> web:         +# Slaves send PINGs to server in a predefined interval. It's possible to change
==> web:         +# this interval with the repl_ping_slave_period option. The default value is 10
==> web:         +# seconds.
==> web:         +#
==> web:         +repl-ping-slave-period 10
==> web:         +
==> web:         +# The following option sets a timeout for both Bulk transfer I/O timeout and
==> web:         +# master data or ping response timeout. The default value is 60 seconds.
==> web:         +#
==> web:         +# It is important to make sure that this value is greater than the value
==> web:         +# specified for repl-ping-slave-period otherwise a timeout will be detected
==> web:         +# every time there is low traffic between the master and the slave.
==> web:         +#
==> web:         +repl-timeout 60
==> web:         +
==> web:         +################################## SECURITY ###################################
==> web:         +
==> web:         +# Require clients to issue AUTH <PASSWORD> before processing any other
==> web:         +# commands.  This might be useful in environments in which you do not trust
==> web:         +# others with access to the host running redis-server.
==> web:         +#
==> web:         +# This should stay commented out for backward compatibility and because most
==> web:         +# people do not need auth (e.g. they run their own servers).
==> web:         +#
==> web:         +# Warning: since Redis is pretty fast an outside user can try up to
==> web:         +# 150k passwords per second against a good box. This means that you should
==> web:         +# use a very strong password otherwise it will be very easy to break.
==> web:         +#
==> web:         +# requirepass foobared
==> web:         +
==> web:         +
==> web:         +# Command renaming.
==> web:         +#
==> web:         +# It is possilbe to change the name of dangerous commands in a shared
==> web:         +# environment. For instance the CONFIG command may be renamed into something
==> web:         +# of hard to guess so that it will be still available for internal-use
==> web:         +# tools but not available for general clients.
==> web:         +#
==> web:         +# Example:
==> web:         +#
==> web:
==> web:         +# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
==> web:         +#
==> web:         +# It is also possilbe to completely kill a command renaming it into
==> web:         +# an empty string:
==> web:         +#
==> web:         +# rename-command CONFIG ""
==> web:         +
==> web:         +################################### LIMITS ####################################
==> web:         +
==> web:         +# Set the max number of connected clients at the same time. By default there
==> web:         +# is no limit, and it's up to the number of file descriptors the Redis process
==> web:         +# is able to open. The special value '0' means no limits.
==> web:         +# Once the limit is reached Redis will close all the new connections sending
==> web:         +# an error 'max number of clients reached'.
==> web:         +#
==> web:         +maxclients 10000
==> web:         +
==> web:         +# Don't use more memory than the specified amount of bytes.
==> web:         +# When the memory limit is reached Redis will try to remove keys
==> web:         +# accordingly to the eviction policy selected (see maxmemmory-policy).
==> web:         +#
==> web:         +# If Redis can't remove keys according to the policy, or if the policy is
==> web:         +# set to 'noeviction', Redis will start to reply with errors to commands
==> web:         +# that would use more memory, like SET, LPUSH, and so on, and will continue
==> web:         +# to reply to read-only commands like GET.
==> web:         +#
==> web:         +# This option is usually useful when using Redis as an LRU cache, or to set
==> web:         +# an hard memory limit for an instance (using the 'noeviction' policy).
==> web:         +#
==> web:         +# WARNING: If you have slaves attached to an instance with maxmemory on,
==> web:         +# the size of the output buffers needed to feed the slaves are subtracted
==> web:         +# from the used memory count, so that network problems / resyncs will
==> web:         +# not trigger a loop where keys are evicted, and in turn the output
==> web:         +# buffer of slaves is full with DELs of keys evicted triggering the deletion
==> web:         +# of more keys, and so forth until the database is completely emptied.
==> web:         +#
==> web:         +# In short... if you have slaves attached it is suggested that you set a lower
==> web:         +# limit for maxmemory so that there is some free RAM on the system for slave
==> web:         +# output buffers (but this is not needed if the policy is 'noeviction').
==> web:         +#
==> web:         +#maxmemory <bytes>
==> web:         +
==> web:         +
==> web:         +# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
==> web:         +# is reached? You can select among five behavior:
==> web:         +#
==> web:
==> web:         +# volatile-lru -> remove the key with an expire set using an LRU algorithm
==> web:         +# allkeys-lru -> remove any key accordingly to the LRU algorithm
==> web:         +# volatile-random -> remove a random key with an expire set
==> web:         +# allkeys->random -> remove a random key, any key
==> web:         +# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
==> web:         +# noeviction -> don't expire at all, just return an error on write operations
==> web:         +#
==> web:         +# Note: with all the kind of policies, Redis will return an error on write
==> web:         +#       operations, when there are not suitable keys for eviction.
==> web:         +#
==> web:         +#       At the date of writing this commands are: set setnx setex append
==> web:         +#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
==> web:         +#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
==> web:         +#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
==> web:         +#       getset mset msetnx exec sort
==> web:         +#
==> web:         +# The default is:
==> web:         +#
==> web:         +# maxmemory-policy volatile-lru
==> web:         +maxmemory-policy volatile-lru
==> web:         +
==> web:         +# LRU and minimal TTL algorithms are not precise algorithms but approximated
==> web:         +# algorithms (in order to save memory), so you can select as well the sample
==> web:         +# size to check. For instance for default Redis will check three keys and
==> web:         +# pick the one that was used less recently, you can change the sample size
==> web:         +# using the following configuration directive.
==> web:         +#
==> web:         +# maxmemory-samples 3
==> web:         +maxmemory-samples 3
==> web:         +
==> web:         +############################## APPEND ONLY MODE ###############################
==> web:         +
==> web:         +# By default Redis asynchronously dumps the dataset on disk. If you can live
==> web:         +# with the idea that the latest records will be lost if something like a crash
==> web:         +# happens this is the preferred way to run Redis. If instead you care a lot
==> web:         +# about your data and don't want to that a single record can get lost you should
==> web:         +# enable the append only mode: when this mode is enabled Redis will append
==> web:         +# every write operation received in the file appendonly.aof. This file will
==> web:         +# be read on startup in order to rebuild the full dataset in memory.
==> web:         +#
==> web:         +# Note that you can have both the async dumps and the append only file if you
==> web:         +# like (you have to comment the "save" statements above to disable the dumps).
==> web:         +# Still if append only mode is enabled Redis will load the data from the
==> web:         +# log file at startup ignoring the dump.rdb file.
==> web:         +#
==> web:         +# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
==> web:         +# log file in background when it gets too big.
==> web:         +
==> web:         +appendonly no
==> web:         +# The name of the append only file (default: "appendonly.aof")
==> web:         +appendfilename appendonly-6379.aof
==> web:
==> web:         +
==> web:         +# The fsync() call tells the Operating System to actually write data on disk
==> web:         +# instead to wait for more data in the output buffer. Some OS will really flush
==> web:         +# data on disk, some other OS will just try to do it ASAP.
==> web:         +#
==> web:         +# Redis supports three different modes:
==> web:         +#
==> web:         +# no: don't fsync, just let the OS flush the data when it wants. Faster.
==> web:         +# always: fsync after every write to the append only log . Slow, Safest.
==> web:         +# everysec: fsync only if one second passed since the last fsync. Compromise.
==> web:         +#
==> web:         +# The default is "everysec" that's usually the right compromise between
==> web:         +# speed and data safety. It's up to you to understand if you can relax this to
==> web:         +# "no" that will will let the operating system flush the output buffer when
==> web:         +# it wants, for better performances (but if you can live with the idea of
==> web:         +# some data loss consider the default persistence mode that's snapshotting),
==> web:
==> web:         +# or on the contrary, use "always" that's very slow but a bit safer than
==> web:         +# everysec.
==> web:         +#
==> web:
==> web:         +# If unsure, use "everysec".
==> web:
==> web:         +
==> web:
==> web:         +# appendfsync always
==> web:
==> web:         +# appendfsync everysec
==> web:         +# appendfsync no
==> web:
==> web:         +appendfsync everysec
==> web:         +
==> web:
==> web:         +# When the AOF fsync policy is set to always or everysec, and a background
==> web:         +# saving process (a background save or AOF log background rewriting) is
==> web:
==> web:         +# performing a lot of I/O against the disk, in some Linux configurations
==> web:         +# Redis may block too long on the fsync() call. Note that there is no fix for
==> web:         +# this currently, as even performing fsync in a different thread will block
==> web:
==> web:         +# our synchronous write(2) call.
==> web:         +#
==> web:         +# In order to mitigate this problem it's possible to use the following option
==> web:
==> web:         +# that will prevent fsync() from being called in the main process while a
==> web:         +# BGSAVE or BGREWRITEAOF is in progress.
==> web:         +#
==> web:
==> web:         +# This means that while another child is saving the durability of Redis is
==> web:         +# the same as "appendfsync none", that in pratical terms means that it is
==> web:         +# possible to lost up to 30 seconds of log in the worst scenario (with the
==> web:
==> web:         +# default Linux settings).
==> web:         +#
==> web:         +# If you have latency problems turn this to "yes". Otherwise leave it as
==> web:
==> web:         +# "no" that is the safest pick from the point of view of durability.
==> web:         +no-appendfsync-on-rewrite no
==> web:
==> web:         +
==> web:         +# Automatic rewrite of the append only file.
==> web:         +# Redis is able to automatically rewrite the log file implicitly calling
==> web:
==> web:         +# BGREWRITEAOF when the AOF log size will growth by the specified percentage.
==> web:         +#
==> web:
==> web:         +# This is how it works: Redis remembers the size of the AOF file after the
==> web:         +# latest rewrite (or if no rewrite happened since the restart, the size of
==> web:
==> web:         +# the AOF at startup is used).
==> web:         +#
==> web:
==> web:         +# This base size is compared to the current size. If the current size is
==> web:
==> web:         +# bigger than the specified percentage, the rewrite is triggered. Also
==> web:         +# you need to specify a minimal size for the AOF file to be rewritten, this
==> web:         +# is useful to avoid rewriting the AOF file even if the percentage increase
==> web:         +# is reached but it is still pretty small.
==> web:         +#
==> web:         +# Specify a precentage of zero in order to disable the automatic AOF
==> web:         +# rewrite feature.
==> web:         +
==> web:         +auto-aof-rewrite-percentage 100
==> web:         +auto-aof-rewrite-min-size 64mb
==> web:         +
==> web:         +################################## SLOW LOG ###################################
==> web:         +
==> web:         +# The Redis Slow Log is a system to log queries that exceeded a specified
==> web:         +# execution time. The execution time does not include the I/O operations
==> web:         +# like talking with the client, sending the reply and so forth,
==> web:         +# but just the time needed to actually execute the command (this is the only
==> web:         +# stage of command execution where the thread is blocked and can not serve
==> web:         +# other requests in the meantime).
==> web:         +#
==> web:         +# You can configure the slow log with two parameters: one tells Redis
==> web:         +# what is the execution time, in microseconds, to exceed in order for the
==> web:         +# command to get logged, and the other parameter is the length of the
==> web:         +# slow log. When a new command is logged the oldest one is removed from the
==> web:         +# queue of logged commands.
==> web:         +
==> web:         +# The following time is expressed in microseconds, so 1000000 is equivalent
==> web:         +# to one second. Note that a negative number disables the slow log, while
==> web:         +# a value of zero forces the logging of every command.
==> web:         +slowlog-log-slower-than 10000
==> web:         +
==> web:         +# There is no limit to this length. Just be aware that it will consume memory.
==> web:         +# You can reclaim memory used by the slow log with SLOWLOG RESET.
==> web:         +slowlog-max-len 1024
==> web:         +
==> web:         +
==> web:         +############################### ADVANCED CONFIG ###############################
==> web:         +
==> web:         +# Hashes are encoded using a memory efficient data structure when they have a
==> web:         +# small number of entries, and the biggest entry does not exceed a given
==> web:
==> web:         +# threshold. These thresholds can be configured using the following directives.
==> web:         +
==> web:         +  ######## Redis 2.6 ########
==> web:         +  hash-max-ziplist-entries 512
==> web:         +  hash-max-ziplist-value 64
==> web:         +
==> web:         +# Similarly to hashes, small lists are also encoded in a special way in order
==> web:         +# to save a lot of space. The special representation is only used when
==> web:         +# you are under the following limits:
==> web:         +list-max-ziplist-entries 512
==> web:         +list-max-ziplist-value 64
==> web:         +
==> web:         +# Sets have a special encoding in just one case: when a set is composed
==> web:         +# of just strings that happens to be integers in radix 10 in the range
==> web:         +# of 64 bit signed integers.
==> web:         +# The following configuration setting sets the limit in the size of the
==> web:         +# set in order to use this special memory saving encoding.
==> web:
==> web:         +set-max-intset-entries 512
==> web:         +
==> web:         +# Similarly to hashes and lists, sorted sets are also specially encoded in
==> web:         +# order to save a lot of space. This encoding is only used when the length and
==> web:         +# elements of a sorted set are below the following limits:
==> web:         +zset-max-ziplist-entries 128
==> web:         +zset-max-ziplist-value 64
==> web:         +
==> web:         +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
==> web:         +# order to help rehashing the main Redis hash table (the one mapping top-level
==> web:         +# keys to values). The hash table implementation redis uses (see dict.c)
==> web:         +# performs a lazy rehashing: the more operation you run into an hash table
==> web:         +# that is rhashing, the more rehashing "steps" are performed, so if the
==> web:         +# server is idle the rehashing is never complete and some more memory is used
==> web:         +# by the hash table.
==> web:         +#
==> web:         +# The default is to use this millisecond 10 times every second in order to
==> web:         +# active rehashing the main dictionaries, freeing memory when possible.
==> web:         +#
==> web:         +# If unsure:
==> web:         +# use "activerehashing no" if you have hard latency requirements and it is
==> web:         +# not a good thing in your environment that Redis can reply form time to time
==> web:         +# to queries with 2 milliseconds delay.
==> web:         +#
==> web:         +# use "activerehashing yes" if you don't have such hard requirements but
==> web:         +# want to free memory asap when possible.
==> web:         +activerehashing yes
==> web:         +
==> web:         +
==> web:         +################################## INCLUDES ###################################
==> web:         +
==> web:         +# Include one or more other config files here.  This is useful if you
==> web:         +# have a standard template that goes to all redis server but also need
==> web:         +# to customize a few per-server settings.  Include files can include
==> web:         +# other files, so use this wisely.
==> web:         +#
==> web:         +# include /path/to/local.conf
==> web:         +# include /path/to/other.conf
==> web:         +
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/redis/6379.conf] owner changed to 998
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/redis/6379.conf] group changed to 998
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/redis/6379.conf] mode changed to 644
==> web:
==> web:     - change mode from '' to '0644'
==> web:     - change owner from '' to 'redis'
==> web:     - change group from '' to 'redis'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/init.d/redis6379] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/init.d/redis6379] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 217)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: touching /etc/init.d/redis6379 to create it
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/init.d/redis6379] created file /etc/init.d/redis6379
==> web:
==> web:     - create new file /etc/init.d/redis6379
==> web: [2015-09-14T22:24:25+00:00] DEBUG: calculating checksum of /tmp/chef-rendered-template20150914-1761-p2fsql to compare with
==> web: [2015-09-14T22:24:25+00:00] DEBUG: running: diff -u /etc/init.d/redis6379 /tmp/chef-rendered-template20150914-1761-p2fsql
==> web: [2015-09-14T22:24:25+00:00] DEBUG: reading modes from /etc/init.d/redis6379 file
==> web: [2015-09-14T22:24:25+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rendered-template20150914-1761-p2fsql
==> web: [2015-09-14T22:24:25+00:00] DEBUG: moving temporary file /tmp/chef-rendered-template20150914-1761-p2fsql into place at /etc/init.d/redis6379
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/init.d/redis6379] updated file contents /etc/init.d/redis6379
==> web:
==> web:     - update content in file /etc/init.d/redis6379 from none to 998b52
==> web:         --- /etc/init.d/redis6379	2015-09-14 22:24:25.849032215 +0000
==> web:
==> web:         +++ /tmp/chef-rendered-template20150914-1761-p2fsql	2015-09-14 22:24:25.849032215 +0000
==> web:         @@ -1 +1,63 @@
==> web:         +#!/bin/sh
==> web:         +#
==> web:         +# Simple Redis init.d script conceived to work on Linux systems
==> web:         +# as it does use of the /proc filesystem.
==> web:
==> web:         +#
==> web:         +# description: Redis is an in memory key-value store database
==> web:         +#
==> web:         +### BEGIN INIT INFO
==> web:         +# Provides: redis6379
==> web:         +# Default-Start: 2 3 4 5
==> web:         +# Default-Stop: 0 1 6
==> web:         +# Description: redis6379 init script
==> web:         +### END INIT INFO
==> web:         +
==> web:         +REDISNAME=6379
==> web:         +REDISPORT=6379
==> web:         +EXEC="sudo -u redis /usr/local/bin/redis-server /etc/redis/${REDISNAME}.conf"
==> web:         +CLIEXEC=/usr/local/bin/redis-cli
==> web:         +
==> web:         +
==> web:         +PIDFILE=/var/run/redis/6379/redis_${REDISNAME}.pid
==> web:         +
==> web:         +if [ ! -d /var/run/redis/6379 ]; then
==> web:         +    mkdir -p /var/run/redis/6379
==> web:         +    chown redis  /var/run/redis/6379
==> web:         +fi
==> web:         +
==> web:         +ulimit -n 10032
==> web:         +
==> web:         +case "$1" in
==> web:         +    start)
==> web:         +        if [ -f $PIDFILE ]
==> web:         +        then
==> web:         +                echo "$PIDFILE exists, process is already running or crashed"
==> web:         +        else
==> web:         +                echo "Starting Redis server..."
==> web:         +                eval $EXEC
==> web:         +        fi
==> web:         +        ;;
==> web:         +    stop)
==> web:         +        if [ ! -f $PIDFILE ]
==> web:         +        then
==> web:
==> web:         +                echo "$PIDFILE does not exist, process is not running"
==> web:         +        else
==> web:         +                PID=$(cat $PIDFILE)
==> web:         +                echo "Stopping ..."
==> web:         +
==> web:         +
==> web:         +                $CLIEXEC  -p 6379 shutdown
==> web:         +
==> web:         +                while [ -x /proc/${PID} ]
==> web:         +                do
==> web:         +                    echo "Waiting for Redis to shutdown ..."
==> web:         +                    sleep 1
==> web:         +                done
==> web:         +                echo "Redis stopped"
==> web:         +        fi
==> web:         +        ;;
==> web:         +    *)
==> web:         +        echo "Please use start or stop as first argument"
==> web:         +        ;;
==> web:         +esac
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_uid == nil, so we are creating a new file, updating owner
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/init.d/redis6379] owner changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_gid == nil, so we are creating a new file, updating group
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/init.d/redis6379] group changed to 0
==> web: [2015-09-14T22:24:25+00:00] DEBUG: found current_mode == nil, so we are creating a new file, updating mode
==> web: [2015-09-14T22:24:25+00:00] INFO: template[/etc/init.d/redis6379] mode changed to 755
==> web:
==> web:     - change mode from '' to '0755'
==> web:     - change owner from '' to 'root'
==> web:     - change group from '' to 'root'
==> web: [2015-09-14T22:24:25+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * template[/etc/init/redis6379.conf] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing template[/etc/init/redis6379.conf] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 240)
==> web:  (skipped due to only_if)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Skipping template[/etc/init/redis6379.conf] due to only_if ruby block
==> web:
==> web:     - evaluate block and run any associated actions
==> web:   * remote_file[/var/chef/cache/redis-2.6.17.tar.gz] action create
==> web: [2015-09-14T22:24:25+00:00] INFO: Processing remote_file[/var/chef/cache/redis-2.6.17.tar.gz] action create (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 35)
==> web: [2015-09-14T22:24:25+00:00] DEBUG: touching /var/chef/cache/redis-2.6.17.tar.gz to create it
==> web: [2015-09-14T22:24:25+00:00] INFO: remote_file[/var/chef/cache/redis-2.6.17.tar.gz] created file /var/chef/cache/redis-2.6.17.tar.gz
==> web:
==> web:     - create new file /var/chef/cache/redis-2.6.17.tar.gz
==> web: [2015-09-14T22:24:25+00:00] DEBUG: remote_file[/var/chef/cache/redis-2.6.17.tar.gz] checking for changes
==> web: [2015-09-14T22:24:25+00:00] DEBUG: turning gzip compression off due to filename ending in gz
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Cache control headers: {}
==> web: [2015-09-14T22:24:25+00:00] DEBUG: Initiating GET to http://download.redis.io/releases//redis-2.6.17.tar.gz
==> web: [2015-09-14T22:24:25+00:00] DEBUG: ---- HTTP Request Header Data: ----
==> web: [2015-09-14T22:24:26+00:00] DEBUG: Streaming download from http://download.redis.io/releases//redis-2.6.17.tar.gz to tempfile /tmp/chef-rest20150914-1761-pqhycp
==> web: [2015-09-14T22:24:26+00:00] DEBUG: ---- HTTP Status and Header Data: ----
==> web: [2015-09-14T22:24:26+00:00] DEBUG: HTTP 1.1 200 OK
==> web: [2015-09-14T22:24:26+00:00] DEBUG: date: Mon, 14 Sep 2015 22:24:26 GMT
==> web: [2015-09-14T22:24:26+00:00] DEBUG: server: Apache/2.2.12 (Ubuntu)
==> web: [2015-09-14T22:24:26+00:00] DEBUG: last-modified: Wed, 11 Dec 2013 14:39:17 GMT
==> web: [2015-09-14T22:24:26+00:00] DEBUG: etag: "de02b-f418b-4ed433190af40"
==> web: [2015-09-14T22:24:26+00:00] DEBUG: accept-ranges: bytes
==> web: [2015-09-14T22:24:26+00:00] DEBUG: content-length: 999819
==> web: [2015-09-14T22:24:26+00:00] DEBUG: connection: close
==> web: [2015-09-14T22:24:26+00:00] DEBUG: content-type: application/x-gzip
==> web: [2015-09-14T22:24:26+00:00] DEBUG: ---- End HTTP Status/Header Data ----
==> web: [2015-09-14T22:24:26+00:00] DEBUG: calculating checksum of /tmp/chef-rest20150914-1761-pqhycp to compare with
==> web: [2015-09-14T22:24:26+00:00] DEBUG: reading modes from /var/chef/cache/redis-2.6.17.tar.gz file
==> web: [2015-09-14T22:24:26+00:00] DEBUG: applying mode = 644, uid = 0, gid = 0 to /tmp/chef-rest20150914-1761-pqhycp
==> web: [2015-09-14T22:24:26+00:00] DEBUG: moving temporary file /tmp/chef-rest20150914-1761-pqhycp into place at /var/chef/cache/redis-2.6.17.tar.gz
==> web: [2015-09-14T22:24:26+00:00] INFO: remote_file[/var/chef/cache/redis-2.6.17.tar.gz] updated file contents /var/chef/cache/redis-2.6.17.tar.gz
==> web:
==> web:     - update content in file /var/chef/cache/redis-2.6.17.tar.gz from none to 5a65b5
==> web:         (new content is binary, diff output suppressed)
==> web: [2015-09-14T22:24:26+00:00] DEBUG: found target_mode == nil, so no mode was specified on resource, not managing mode
==> web: [2015-09-14T22:24:26+00:00] DEBUG: found target_uid == nil, so no owner was specified on resource, not managing owner
==> web: [2015-09-14T22:24:26+00:00] DEBUG: found target_gid == nil, so no group was specified on resource, not managing group
==> web: [2015-09-14T22:24:26+00:00] DEBUG: selinux utilities can not be found. Skipping selinux permission fixup.
==> web:   * execute[cd /var/chef/cache ; mkdir -p 'redis-2.6.17' ; tar zxf 'redis-2.6.17.tar.gz' --strip-components=1 -C 'redis-2.6.17'] action run
==> web: [2015-09-14T22:24:26+00:00] INFO: Processing execute[cd /var/chef/cache ; mkdir -p 'redis-2.6.17' ; tar zxf 'redis-2.6.17.tar.gz' --strip-components=1 -C 'redis-2.6.17'] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 44)
==> web: [2015-09-14T22:24:26+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:26+00:00] INFO: execute[cd /var/chef/cache ; mkdir -p 'redis-2.6.17' ; tar zxf 'redis-2.6.17.tar.gz' --strip-components=1 -C 'redis-2.6.17'] ran successfully
==> web:
==> web:     - execute cd /var/chef/cache ; mkdir -p 'redis-2.6.17' ; tar zxf 'redis-2.6.17.tar.gz' --strip-components=1 -C 'redis-2.6.17'
==> web:   * execute[cd /var/chef/cache/redis-2.6.17 && make clean && make] action run
==> web: [2015-09-14T22:24:26+00:00] INFO: Processing execute[cd /var/chef/cache/redis-2.6.17 && make clean && make] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 51)
==> web: [2015-09-14T22:24:26+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:48+00:00] INFO: execute[cd /var/chef/cache/redis-2.6.17 && make clean && make] ran successfully
==> web:
==> web:     - execute cd /var/chef/cache/redis-2.6.17 && make clean && make
==> web:   * execute[cd /var/chef/cache/redis-2.6.17 && make  install] action run
==> web: [2015-09-14T22:24:48+00:00] INFO: Processing execute[cd /var/chef/cache/redis-2.6.17 && make  install] action run (/tmp/vagrant-chef/a14ee2ad522f8501ac3f6516e5e7f70f/cookbooks/redisio/providers/install.rb line 57)
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:48+00:00] INFO: execute[cd /var/chef/cache/redis-2.6.17 && make  install] ran successfully
==> web:
==> web:     - execute cd /var/chef/cache/redis-2.6.17 && make  install
==> web: Recipe: redisio::install
==> web:   * service[redis6379] action nothing
==> web: [2015-09-14T22:24:48+00:00] INFO: Processing service[redis6379] action nothing (redisio::install line 46)
==> web:  (skipped due to action :nothing)
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Skipping service[redis6379] due to action :nothing
==> web:   * service[redis6379] action start
==> web: [2015-09-14T22:24:48+00:00] INFO: Processing service[redis6379] action start (redisio::install line 46)
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[redis6379] you have specified a status command, running..
==> web: [2015-09-14T22:24:48+00:00] INFO: service[redis6379] started
==> web:
==> web:     - start service service[redis6379]
==> web:   * service[redis6379] action enable
==> web: [2015-09-14T22:24:48+00:00] INFO: Processing service[redis6379] action enable (redisio::install line 46)
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[redis6379] you have specified a status command, running..
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[redis6379] is running
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Executing /usr/sbin/update-rc.d -f redis6379 remove
==> web: [2015-09-14T22:24:48+00:00] DEBUG: ---- Begin output of /usr/sbin/update-rc.d -f redis6379 remove ----
==> web: [2015-09-14T22:24:48+00:00] DEBUG: STDOUT:  Removing any system startup links for /etc/init.d/redis6379 ...
==> web: [2015-09-14T22:24:48+00:00] DEBUG: STDERR:
==> web: [2015-09-14T22:24:48+00:00] DEBUG: ---- End output of /usr/sbin/update-rc.d -f redis6379 remove ----
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Ran /usr/sbin/update-rc.d -f redis6379 remove returned 0
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Executing /usr/sbin/update-rc.d redis6379 defaults
==> web: [2015-09-14T22:24:48+00:00] DEBUG: ---- Begin output of /usr/sbin/update-rc.d redis6379 defaults ----
==> web: [2015-09-14T22:24:48+00:00] DEBUG: STDOUT:  Adding system startup for /etc/init.d/redis6379 ...
==> web:    /etc/rc0.d/K20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc1.d/K20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc6.d/K20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc2.d/S20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc3.d/S20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc4.d/S20redis6379 -> ../init.d/redis6379
==> web:    /etc/rc5.d/S20redis6379 -> ../init.d/redis6379
==> web: [2015-09-14T22:24:48+00:00] DEBUG: STDERR: update-rc.d: warning: /etc/init.d/redis6379 missing LSB keyword 'required-start'
==> web:
==> web: update-rc.d: warning: /etc/init.d/redis6379 missing LSB keyword 'required-stop'
==> web:
==> web: [2015-09-14T22:24:48+00:00] DEBUG: ---- End output of /usr/sbin/update-rc.d redis6379 defaults ----
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Ran /usr/sbin/update-rc.d redis6379 defaults returned 0
==> web: [2015-09-14T22:24:48+00:00] INFO: service[redis6379] enabled
==> web:
==> web:     - enable service service[redis6379]
==> web: [2015-09-14T22:24:48+00:00] INFO: template[/etc/php5/cli/php.ini] sending restart action to service[php-fpm] (delayed)
==> web: Recipe: my_company::php-fpm
==> web:   * service[php-fpm] action restart
==> web: [2015-09-14T22:24:48+00:00] INFO: Processing service[php-fpm] action restart (my_company::php-fpm line 24)
==> web: [2015-09-14T22:24:48+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] falling back to process table inspection
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] attempting to match 'php-fpm' (/php-fpm/) against process list
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] running: true
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:24:48+00:00] DEBUG: service[php-fpm] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] INFO: service[php-fpm] restarted
==> web:
==> web:     - restart service service[php-fpm]
==> web: [2015-09-14T22:24:50+00:00] INFO: template[nginx.conf] sending reload action to service[nginx] (delayed)
==> web: Recipe: nginx::default
==> web:   * service[nginx] action reload
==> web: [2015-09-14T22:24:50+00:00] INFO: Processing service[nginx] action reload (nginx::default line 24)
==> web: [2015-09-14T22:24:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] supports status, running
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] is running
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[nginx] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] INFO: service[nginx] reloaded
==> web:
==> web:     - reload service service[nginx]
==> web: [2015-09-14T22:24:50+00:00] INFO: template[/etc/memcached.conf] sending restart action to service[memcached] (delayed)
==> web: Recipe: memcached::default
==> web:   * service[memcached] action restart
==> web: [2015-09-14T22:24:50+00:00] INFO: Processing service[memcached] action restart (memcached::default line 42)
==> web: [2015-09-14T22:24:50+00:00] DEBUG: Platform ubuntu version 12.04 found
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] supports status, running
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] is running
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 0, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 1, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 2, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 3, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 4, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 5, action start, priority 20
==> web: [2015-09-14T22:24:50+00:00] DEBUG: service[memcached] runlevel 6, action stop, priority 20
==> web: [2015-09-14T22:24:50+00:00] INFO: service[memcached] restarted
==> web:
==> web:     - restart service service[memcached]
==> web: [2015-09-14T22:24:50+00:00] INFO: Chef Run complete in 1189.658743252 seconds
==> web:
==> web: Running handlers:
==> web: [2015-09-14T22:24:50+00:00] INFO: Running report handlers
==> web: Running handlers complete
==> web: [2015-09-14T22:24:50+00:00] INFO: Report handlers complete
==> web: Chef Client finished, 146/183 resources updated in 1190.168655423 seconds
==> web: [2015-09-14T22:24:50+00:00] DEBUG: Forked instance successfully reaped (pid: 1761)
==> web: [2015-09-14T22:24:50+00:00] DEBUG: Exiting

## Vagrantfile.rb
base_path = 'htdocs/protected/config'

Vagrant::Config.run do |config|

  config.vm.define :web, primary: true do |web_config|
    web_config.vm.box = 'my_company'

    web_config.vm.box_url = 'http://files.vagrantup.com/precise64.box'

    web_config.vm.network :hostonly, '192.168.33.10'

    web_config.vm.forward_port 3306, 3306

    unless ENV['EC2_HOME'].nil?
      web_config.vm.share_folder 'ec2-home', ENV['EC2_HOME'], ENV['EC2_HOME'], :nfs => true
    end

    web_config.vm.share_folder 'host-home', '/home/host-user', '~', :nfs => true
    web_config.vm.share_folder 'vagrant-root', '/vagrant', '.', :nfs => true


    web_config.vm.provision :chef_solo do |chef|
      chef.version = "11.10"
      chef.cookbooks_path = "#{base_path}/cookbooks"
      chef.log_level = :debug

      chef.json = {
        :git => {
          :version => '1.7.9.5'
        },
        :mysql => {
          :server_root_password => '',
          :server_repl_password => '',
          :server_debian_password => '',
          :allow_remote_root => true
        },
        :php_fpm => {
          :listen_to => 'port',
          :php_ini => {
            :display_errors => 'On'
          }
        },
        :my_company => {
          :database_dir => '/data/mysql',
        },
        :php => {
          :install_method => 'source',
          :version => '5.5.10',
          :checksum => 'abf751810593844e0897007797210828b193a213d9b204f203e0331019cadb90'
        },
        :memcached => {
          :memory => 48,
          :port => 11211,
          :udp_port => 11211,
          :listen => '127.0.0.1'
        }
      }

      chef.add_recipe 'php'
      chef.add_recipe 'composer'
      chef.add_recipe 'my_company::php'
      chef.add_recipe 'my_company::php-fpm'
      chef.add_recipe 'curl'
      chef.add_recipe 'nginx'
      chef.add_recipe 'my_company::data_cleanup'
      chef.add_recipe 'mysql::client'
      chef.add_recipe 'mysql::server'
      chef.add_recipe 'my_company::resque_setup'
      chef.add_recipe 'java'

      chef.add_recipe 'nodejs'
      chef.add_recipe 'my_company::composer-self-update'
      chef.add_recipe 'my_company::local'
      chef.add_recipe 'my_company::xdebug'
      chef.add_recipe 'my_company::ffmpeg_install'
      chef.add_recipe 'memcached'
      chef.add_recipe 'redisio::install'
      chef.add_recipe 'redisio::enable'
      chef.add_recipe 'my_company::ffmpeg_install'
    end

  end
end
	base_path = 'htdocs/protected/config'

	Vagrant::Config.run do \|config\|

	config.vm.define :web, primary: true do \|web_config\|
	web_config.vm.box = 'my_company'

	web_config.vm.box_url = 'http://files.vagrantup.com/precise64.box'

	web_config.vm.network :hostonly, '192.168.33.10'

	web_config.vm.forward_port 3306, 3306

	unless ENV['EC2_HOME'].nil?
	web_config.vm.share_folder 'ec2-home', ENV['EC2_HOME'], ENV['EC2_HOME'], :nfs => true
	end

	web_config.vm.share_folder 'host-home', '/home/host-user', '~', :nfs => true
	web_config.vm.share_folder 'vagrant-root', '/vagrant', '.', :nfs => true


	web_config.vm.provision :chef_solo do \|chef\|
	chef.version = "11.10"
	chef.cookbooks_path = "#{base_path}/cookbooks"
	chef.log_level = :debug

	chef.json = {
	:git => {
	:version => '1.7.9.5'
	},
	:mysql => {
	:server_root_password => '',
	:server_repl_password => '',
	:server_debian_password => '',
	:allow_remote_root => true
	},
	:php_fpm => {
	:listen_to => 'port',
	:php_ini => {
	:display_errors => 'On'
	}
	},
	:my_company => {
	:database_dir => '/data/mysql',
	},
	:php => {
	:install_method => 'source',
	:version => '5.5.10',
	:checksum => 'abf751810593844e0897007797210828b193a213d9b204f203e0331019cadb90'
	},
	:memcached => {
	:memory => 48,
	:port => 11211,
	:udp_port => 11211,
	:listen => '127.0.0.1'
	}
	}

	chef.add_recipe 'php'
	chef.add_recipe 'composer'
	chef.add_recipe 'my_company::php'
	chef.add_recipe 'my_company::php-fpm'
	chef.add_recipe 'curl'
	chef.add_recipe 'nginx'
	chef.add_recipe 'my_company::data_cleanup'
	chef.add_recipe 'mysql::client'
	chef.add_recipe 'mysql::server'
	chef.add_recipe 'my_company::resque_setup'
	chef.add_recipe 'java'

	chef.add_recipe 'nodejs'
	chef.add_recipe 'my_company::composer-self-update'
	chef.add_recipe 'my_company::local'
	chef.add_recipe 'my_company::xdebug'
	chef.add_recipe 'my_company::ffmpeg_install'
	chef.add_recipe 'memcached'
	chef.add_recipe 'redisio::install'
	chef.add_recipe 'redisio::enable'
	chef.add_recipe 'my_company::ffmpeg_install'
	end

	end
	end