v4.11-rc1-ipu-dp-plane-fix.patch

gistfile1.txt

Hit any key to stop autoboot:  0 
MMC: no card present
MMC: no card present
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found

USB device 0: unknown device
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part 
SATA Device Info:
S/N: S377J9FGC05642
Product model number: ST2000LM003 HN-M201RAD
Firmware version: 2BE10001
Capacity: -387938128 sectors

Device 0: Model: ST2000LM003 HN-M201RAD Firm: 2BE10001 Ser#: S377J9FGC05642
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
... is now current device
Scanning sata 0:1...
Found U-Boot script /boot/boot.scr
725 bytes read in 33 ms (20.5 KiB/s)
## Executing script at 12000000
5796160 bytes read in 89 ms (62.1 MiB/s)
50666 bytes read in 447 ms (110.4 KiB/s)
4225385 bytes read in 91 ms (44.3 MiB/s)
Kernel image @ 0x12000000 [ 0x000000 - 0x587140 ]
## Flattened Device Tree blob at 18000000
   Booting using the fdt blob at 0x18000000
   Using Device Tree in place at 18000000, end 1800f5e9

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.11.0-rc4-1-ARCH (alarm@alarm) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Tue Apr 4 05:38:01 UTC 2017
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Freescale i.MX6 Quad SABRE Lite Board
[    0.000000] cma: Reserved 48 MiB at 0x4d000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 16 pages/cpu @ef697000 s35404 r8192 d21940 u65536
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttymxc1,115200 root=PARTUUID=07bca784-01 rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 965492K/1048576K available (11264K kernel code, 1000K rwdata, 4480K rodata, 1024K init, 903K bss, 33932K reserved, 49152K cma-reserved, 212992K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c00000   (12256 kB)
[    0.000000]       .init : 0xc1100000 - 0xc1200000   (1024 kB)
[    0.000000]       .data : 0xc1200000 - 0xc12fa130   (1001 kB)
[    0.000000]        .bss : 0xc12fc000 - 0xc13ddd10   ( 904 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C-310 errata 752271 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[    0.000000] Switching to timer-based delay loop, resolution 333ns
[    0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[    0.000031] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[    0.002971] Console: colour dummy device 80x30
[    0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=12000)
[    0.003020] pid_max: default: 32768 minimum: 301
[    0.003287] Security Framework initialized
[    0.003494] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003506] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004170] CPU: Testing write buffer coherency: ok
[    0.004487] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004769] Setting up static identity map for 0x10100000 - 0x10100098
[    0.008387] smp: Bringing up secondary CPUs ...
[    0.009089] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.009843] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010594] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.010675] smp: Brought up 1 node, 4 CPUs
[    0.010696] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[    0.010704] CPU: All CPU(s) started in SVC mode.
[    0.011675] devtmpfs: initialized
[    0.021912] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.022218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.022238] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.024911] xor: measuring software checksum speed
[    0.063305]    arm4regs  :  1234.000 MB/sec
[    0.103304]    8regs     :   948.000 MB/sec
[    0.143306]    32regs    :   983.000 MB/sec
[    0.183306]    neon      :   901.000 MB/sec
[    0.183316] xor: using function: arm4regs (1234.000 MB/sec)
[    0.183402] pinctrl core: initialized pinctrl subsystem
[    0.185136] NET: Registered protocol family 16
[    0.187650] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.189831] cpuidle: using governor menu
[    0.190687] CPU identified as i.MX6Q, silicon rev 1.2
[    0.206593] irq: no irq domain found for /soc/aips-bus@02000000/gpio@0209c000 !
[    0.213964] No ATAGs?
[    0.214108] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.214123] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.215931] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node hoggrp
[    0.216085] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.217389] Serial: AMBA PL011 UART driver
[    0.295702] raid6: int32x1  gen()   106 MB/s
[    0.363419] raid6: int32x1  xor()   151 MB/s
[    0.431411] raid6: int32x2  gen()   165 MB/s
[    0.499334] raid6: int32x2  xor()   168 MB/s
[    0.567527] raid6: int32x4  gen()   193 MB/s
[    0.635316] raid6: int32x4  xor()   165 MB/s
[    0.703574] raid6: int32x8  gen()   215 MB/s
[    0.771508] raid6: int32x8  xor()   153 MB/s
[    0.839369] raid6: neonx1   gen()   615 MB/s
[    0.907357] raid6: neonx1   xor()   453 MB/s
[    0.975381] raid6: neonx2   gen()   658 MB/s
[    1.043359] raid6: neonx2   xor()   572 MB/s
[    1.111349] raid6: neonx4   gen()   659 MB/s
[    1.179350] raid6: neonx4   xor()   524 MB/s
[    1.247426] raid6: neonx8   gen()   494 MB/s
[    1.315375] raid6: neonx8   xor()   446 MB/s
[    1.315384] raid6: using algorithm neonx4 gen() 659 MB/s
[    1.315391] raid6: .... xor() 524 MB/s, rmw enabled
[    1.315398] raid6: using intx1 recovery algorithm
[    1.328904] mxs-dma 110000.dma-apbh: initialized
[    1.335792] vgaarb: loaded
[    1.336435] SCSI subsystem initialized
[    1.336871] usbcore: registered new interface driver usbfs
[    1.336925] usbcore: registered new interface driver hub
[    1.337005] usbcore: registered new device driver usb
[    1.338405] i2c i2c-0: IMX I2C adapter registered
[    1.338424] i2c i2c-0: can't use DMA, using PIO instead.
[    1.338802] i2c i2c-1: IMX I2C adapter registered
[    1.338817] i2c i2c-1: can't use DMA, using PIO instead.
[    1.339198] i2c i2c-2: IMX I2C adapter registered
[    1.339215] i2c i2c-2: can't use DMA, using PIO instead.
[    1.340229] Linux cec interface: v0.10
[    1.340281] media: Linux media interface: v0.10
[    1.340323] Linux video capture interface: v2.00
[    1.340397] pps_core: LinuxPPS API ver. 1 registered
[    1.340405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.340427] PTP clock support registered
[    1.340465] EDAC MC: Ver: 3.0.0
[    1.341440] Advanced Linux Sound Architecture Driver Initialized.
[    1.341942] NetLabel: Initializing
[    1.341951] NetLabel:  domain hash size = 128
[    1.341958] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.342018] NetLabel:  unlabeled traffic allowed by default
[    1.342354] clocksource: Switched to clocksource mxc_timer1
[    1.342520] VFS: Disk quotas dquot_6.6.0
[    1.342593] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.352838] NET: Registered protocol family 2
[    1.353442] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.353523] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.353648] TCP: Hash tables configured (established 8192 bind 8192)
[    1.353754] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.353797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.354073] NET: Registered protocol family 1
[    1.354503] RPC: Registered named UNIX socket transport module.
[    1.354513] RPC: Registered udp transport module.
[    1.354520] RPC: Registered tcp transport module.
[    1.354527] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.354990] Unpacking initramfs...
[    1.659263] Freeing initrd memory: 4128K
[    1.659782] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.663125] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.668106] zbud: loaded
[    1.670660] NFS: Registering the id_resolver key type
[    1.670685] Key type id_resolver registered
[    1.670694] Key type id_legacy registered
[    1.670711] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.677103] Key type asymmetric registered
[    1.677165] bounce: pool size: 64 pages
[    1.677222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.677350] io scheduler noop registered
[    1.677361] io scheduler deadline registered
[    1.677628] io scheduler cfq registered (default)
[    1.677639] io scheduler mq-deadline registered
[    1.690131] OF: PCI: host bridge /soc/pcie@0x01000000 ranges:
[    1.690147] OF: PCI:   No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
[    1.690176] OF: PCI:    IO 0x01f80000..0x01f8ffff -> 0x00000000
[    1.690194] OF: PCI:   MEM 0x01000000..0x01efffff -> 0x01000000
[    2.692255] imx6q-pcie 1ffc000.pcie: phy link never came up
[    2.695499] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[    2.695517] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.695530] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.695540] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[    2.695964] PCI: bus0: Fast back to back transfers disabled
[    2.696083] PCI: bus1: Fast back to back transfers enabled
[    2.696199] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[    2.696219] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
[    2.696232] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.696494] pcieport 0000:00:00.0: Signaling PME with IRQ 301
[    2.696633] pcieport 0000:00:00.0: AER enabled with IRQ 301
[    2.697445] of_pwm_get(): PWM chip not found
[    2.697608] of_pwm_get(): PWM chip not found
[    2.703235] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[    2.703252] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[    2.710575] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    2.713462] Serial: AMBA driver
[    2.714284] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX
[    2.715023] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX
[    3.695181] console [ttymxc1] enabled
[    3.701944] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[    3.710529] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[    3.728567] loop: module loaded
[    3.733732] Loading iSCSI transport class v2.0-870.
[    3.739032] iscsi: registered transport (tcp)
[    3.744493] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
[    3.752451] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
[    3.760477] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
[    3.768673] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[    3.779174] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[    3.786188] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    3.795003] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    3.805263] scsi host0: ahci-imx
[    3.808764] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73
[    3.821179] libphy: Fixed MDIO Bus: probed
[    3.826817] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator
[    3.837949] pps pps0: new PPS source ptp0
[    3.842630] fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[    3.852577] fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: 1a:12:ed:94:cc:6d
[    3.873283] libphy: fec_enet_mii_bus: probed
[    3.878136] fec 2188000.ethernet eth0: registered PHC device 0
[    3.887335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.893893] ehci-pci: EHCI PCI platform driver
[    3.898411] ehci-platform: EHCI generic platform driver
[    3.903924] ehci-mxc: Freescale On-Chip EHCI Host driver
[    3.909359] ehci-omap: OMAP-EHCI Host Controller driver
[    3.914778] ehci-orion: EHCI orion driver
[    3.918972] ehci-exynos: EHCI EXYNOS driver
[    3.923366] tegra-ehci: Tegra EHCI driver
[    3.927586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.933807] ohci-pci: OHCI PCI platform driver
[    3.938322] ohci-platform: OHCI generic platform driver
[    3.943767] ohci-exynos: OHCI EXYNOS driver
[    3.948169] ohci-omap3: OHCI OMAP3 driver
[    3.952853] usbcore: registered new interface driver uas
[    3.958274] usbcore: registered new interface driver usb-storage
[    3.964340] usbcore: registered new interface driver ums-cypress
[    3.970403] usbcore: registered new interface driver ums_eneub6250
[    3.976633] usbcore: registered new interface driver ums-freecom
[    3.982689] usbcore: registered new interface driver ums-isd200
[    3.988699] usbcore: registered new interface driver ums-usbat
[    4.002999] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator
[    4.014598] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    4.019531] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    4.042386] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    4.047976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.054797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.062042] usb usb1: Product: EHCI Host Controller
[    4.066942] usb usb1: Manufacturer: Linux 4.11.0-rc4-1-ARCH ehci_hcd
[    4.073312] usb usb1: SerialNumber: ci_hdrc.1
[    4.078359] hub 1-0:1.0: USB hub found
[    4.082148] hub 1-0:1.0: 1 port detected
[    4.090669] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
[    4.100193] i2c /dev entries driver
[    4.112732] sdhci: Secure Digital Host Controller Interface driver
[    4.118937] sdhci: Copyright(c) Pierre Ossman
[    4.124554] Synopsys Designware Multimedia Card Interface Driver
[    4.131521] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    4.131897] usbcore: registered new interface driver vub300
[    4.144004] usbcore: registered new interface driver ushc
[    4.150159] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.156848] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[    4.166049] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
[    4.171229] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO
[    4.222506] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[    4.232288] sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode
[    4.241479] sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO
[    4.290398] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.296751] mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
[    4.304133] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BE10001, max UDMA/133
[    4.311055] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    4.317982] ledtrig-cpu: registered to indicate activity on CPUs
[    4.324274] hidraw: raw HID events driver (C) Jiri Kosina
[    4.329823] ata1.00: configured for UDMA/133
[    4.330024] usbcore: registered new interface driver usbhid
[    4.330026] usbhid: USB HID core driver
[    4.330387] ashmem: initialized
[    4.336320] NET: Registered protocol family 10
[    4.351914] scsi 0:0:0:0: Direct-Access     ATA      ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5
[    4.361513] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.361715] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.361722] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.361798] sd 0:0:0:0: [sda] Write Protect is off
[    4.361956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.391727] Segment Routing with IPv6
[    4.391799] mip6: Mobile IPv6
[    4.391808] NET: Registered protocol family 17
[    4.391883] Key type dns_resolver registered
[    4.400493] ThumbEE CPU extension supported.
[    4.400503] Registering SWP/SWPB emulation handler
[    4.400993] registered taskstats version 1
[    4.401056] zswap: loaded using pool lzo/zbud
[    4.426766] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[    4.434855] Btrfs loaded, crc32c=crc32c-generic
[    4.448070] of_pwm_get(): PWM chip not found
[    4.453357] of_pwm_get(): PWM chip not found
[    4.458572] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[    4.467736] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[    4.477611] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.490013] imx_thermal 2000000.aips-bus:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C
[    4.501419] of_pwm_get(): PWM chip not found
[    4.506502] of_pwm_get(): PWM chip not found
[    4.511584] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[    4.520701] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[    4.531103] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[    4.537624] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 2017-04-04 18:11:01 UTC (1491329461)
[    4.547392] sr_init: No PMIC hook to init smartreflex
[    4.552613] sr_init: platform driver register failed for SR
[    4.552882] of_pwm_get(): PWM chip not found
[    4.553626] of_pwm_get(): PWM chip not found
[    4.554434] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[    4.555156] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[    4.584419] usb_otg_vbus: disabling
[    4.587936] CAN XCVR: disabling
[    4.591094] ALSA device list:
[    4.594067]   No soundcards found.
[    4.602806] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[    4.609562] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.609588]  sda: sda1 sda2
[    4.610817] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.625044] hub 1-1:1.0: USB hub found
[    4.625113] Freeing unused kernel memory: 1024K
[    4.633834] hub 1-1:1.0: 3 ports detected
[    4.639550] of_pwm_get(): PWM chip not found
[    4.645091] of_pwm_get(): PWM chip not found
[    4.650895] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[    4.660467] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
:: running early hook [udev]
Warning: /lib/modules/4.11.0-rc4-1-ARCH/modules.devname not found - ignoring
[    4.687857] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
starting version 232
:: running hook [udev]
[    4.706821] random: systemd-udevd: uninitialized urandom read (16 bytes read)
:: Triggering uevents...
[    4.715357] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.724666] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.920834] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.929146] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.935854] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.942921] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.949946] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.956931] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.458442] ata1.00: exception Emask 0x12 SAct 0x60 SErr 0x500 action 0x6 frozen
[    5.465873] ata1.00: irq_stat 0x08000000, interface fatal error
[    5.471815] ata1: SError: { UnrecovData Proto }
[    5.476367] ata1.00: failed command: READ FPDMA QUEUED
[    5.481533] ata1.00: cmd 60/80:28:00:87:a0/00:00:e8:00:00/40 tag 5 ncq dma 65536 in
[    5.481533]          res 40/00:34:88:87:a0/00:00:e8:00:00/40 Emask 0x12 (ATA bus error)
[    5.497196] ata1.00: status: { DRDY }
[    5.500872] ata1.00: failed command: READ FPDMA QUEUED
[    5.506033] ata1.00: cmd 60/68:30:88:87:a0/00:00:e8:00:00/40 tag 6 ncq dma 53248 in
[    5.506033]          res 40/00:34:88:87:a0/00:00:e8:00:00/40 Emask 0x12 (ATA bus error)
[    5.521692] ata1.00: status: { DRDY }
[    5.525372] ata1: hard resetting link
[    6.002407] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.021802] ata1.00: configured for UDMA/133
[    6.026365] ata1: EH complete
[    6.197503] random: fast init done
:: performing fsck on '/dev/sda1'
slarch: clean, 240687/121970688 files, 9167853/487854080 blocks
[    6.483943] ata1.00: exception Emask 0x10 SAct 0x8000 SErr 0x400100 action 0x6 frozen
[    6.491815] ata1.00: irq_stat 0x08000000, interface fatal error
[    6.497769] ata1: SError: { UnrecovData Handshk }
[    6.502497] ata1.00: failed command: WRITE FPDMA QUEUED
[    6.507748] ata1.00: cmd 61/08:78:00:08:44/00:00:74:00:00/40 tag 15 ncq dma 4096 out
[    6.507748]          res 40/00:7c:00:08:44/00:00:74:00:00/40 Emask 0x10 (ATA bus error)
[    6.523497] ata1.00: status: { DRDY }
[    6.527181] ata1: hard resetting link
[    7.006409] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.025784] ata1.00: configured for UDMA/133
[    7.030097] ata1: EH complete
:: mounting '/dev/sda1' on real root
[    7.767038] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    8.595773] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.676861] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.695297] systemd[1]: Detected architecture arm.

Welcome to Arch Linux ARM!

[    8.742551] systemd[1]: Set hostname to <alarm>.
[    9.243313] random: crng init done
[    9.455240] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    9.474673] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    9.498648] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    9.519089] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[    9.546614] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    9.566481] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    9.584190] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-getty.slice.
         Mounting POSIX Message Queue File System...
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting Temporary Directory...
         Starting Create list of required st…ce nodes for the current kernel...
         Starting Journal Service...
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
         Mounting Debug File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted Temporary Directory.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel [   10.198451] ata1.00: exception Emask 0x10 SAct 0x8000000 SErr 0x400100 action 0x6 frozen
File Systems.
[   10.206830] ata1.00: irq_stat 0x08000000, interface fatal error
[   10.214025] ata1: SError: { UnrecovData Handshk }
[   10.218800] ata1.00: failed command: WRITE FPDMA QUEUED
[   10.218820] ata1.00: cmd 61/28:d8:08:08:44/00:00:74:00:00/40 tag 27 ncq dma 20480 out
[   10.218820]          res 40/00:dc:08:08:44/00:00:74:00:00/40 Emask 0x10 (ATA bus error)
[   10.218824] ata1.00: status: { DRDY }
[   10.218836] ata1: hard resetting link
         Starting Create System Users...
[   10.694394] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.713782] ata1.00: configured for UDMA/133
[   10.718101] ata1: EH complete
[   10.730400] ata1: limiting SATA link speed to 1.5 Gbps
[   10.735573] ata1.00: exception Emask 0x10 SAct 0x20000003 SErr 0x400100 action 0x6 frozen
[   10.743778] ata1.00: irq_stat 0x08000000, interface fatal error
[   10.749716] ata1: SError: { UnrecovData Handshk }
[   10.754440] ata1.00: failed command: READ FPDMA QUEUED
[   10.759605] ata1.00: cmd 60/08:00:98:09:01/00:00:0e:00:00/40 tag 0 ncq dma 4096 in
[   10.759605]          res 40/00:04:98:09:01/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   10.775185] ata1.00: status: { DRDY }
[   10.778863] ata1.00: failed command: READ FPDMA QUEUED
[   10.784027] ata1.00: cmd 60/20:08:38:18:05/00:00:0a:00:00/40 tag 1 ncq dma 16384 in
[   10.784027]          res 40/00:04:98:09:01/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   10.799690] ata1.00: status: { DRDY }
[   10.803370] ata1.00: failed command: WRITE FPDMA QUEUED
[   10.808621] ata1.00: cmd 61/28:e8:08:08:44/00:00:74:00:00/40 tag 29 ncq dma 20480 out
[   10.808621]          res 40/00:04:98:09:01/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   10.824460] ata1.00: status: { DRDY }
[   10.828146] ata1: hard resetting link
[   11.306384] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   11.325768] ata1.00: configured for UDMA/133
[   11.330132] ata1: EH complete
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Journal Catalog...
         Starting Rebuild Dynamic Linker Cache...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Rebuild Journal Catalog.
[   12.541835] systemd-journald[198]: Received request to flush runtime journal from PID 1
[   13.078110] m25p80 spi0.0: sst25vf016b (2048 Kbytes)
[   13.083571] imx-ipuv3 2400000.ipu: IPUv3H probed
[   13.093156] of_pwm_get(): PWM chip not found
[   13.095158] imx-ipuv3 2800000.ipu: IPUv3H probed
[   13.103518] of_pwm_get(): PWM chip not found
[   13.103778] spi_imx 2008000.ecspi: probed
[   13.113473] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[   13.124745] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[   13.130969] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops [etnaviv])
[   13.131021] etnaviv gpu-subsystem: bound 130000.gpu (ops gpu_ops [etnaviv])
[   13.131061] etnaviv gpu-subsystem: bound 2204000.gpu (ops gpu_ops [etnaviv])
[   13.131070] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[   13.150842] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=1)
[   13.169489] panel-simple panel-lcd: panel-lcd supply power not found, using dummy regulator
[   13.178601] panel-simple panel-lvds0: panel-lvds0 supply power not found, using dummy regulator
[   13.212634] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[   13.276328] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[   13.282506] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[   13.289743] [drm] Initialized etnaviv 1.0.0 20151214 for gpu-subsystem on minor 0
[  OK  ] Found device /dev/ttymxc1.
[   13.522206] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.528916] [drm] No driver support for vblank timestamp query.
[   13.534993] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imxdrm])
[   13.543389] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imxdrm])
[   13.551694] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imxdrm])
[   13.560061] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imxdrm])
[   13.568328] imx-drm display-subsystem: bound display@di0 (ops imx_pd_ops [parallel_display])
[   13.576982] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY)
[   13.578187] caam 2100000.caam: Entropy delay = 3200
[   13.595335] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx])
[   13.599521] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2
[   13.599583] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2
[   13.599588] coda 2040000.vpu: firmware request failed
[   13.626527] imx-drm display-subsystem: bound 2000000.aips-bus:ldb (ops imx_ldb_ops [imx_ldb])
[   13.638988] caam 2100000.caam: Instantiated RNG4 SH0
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[   13.699755] caam 2100000.caam: Instantiated RNG4 SH1
[   13.704901] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[   13.711377] caam 2100000.caam: job rings = 2, qi = 0
[  OK  ] Created slice system-systemd\x2dbacklight.slice.
         Starting Load/Save Screen Backlight…ness of backlight:backlight-lcd...
         Starting Load/Save Screen Backlight…ess of backlight:backlight-lvds...
[   14.601577] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered
[   14.601590] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[   14.603943] sgtl5000 0-000a: sgtl5000 revision 0x11
[   14.604743] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered
[   14.604752] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[   14.606684] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
[   14.609954] imx-sgtl5000 sound: ASoC: CPU DAI (null) not registered
[   14.609963] imx-sgtl5000 sound: snd_soc_register_card failed (-517)
[   14.624723] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[   14.627422] fsl-asoc-card sound: ASoC: CODEC DAI sgtl5000 not registered
[   14.627430] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[   14.627513] imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered
[   14.627520] imx-sgtl5000 sound: snd_soc_register_card failed (-517)
[   14.653003] fsl-asoc-card sound: sgtl5000 <-> 2028000.ssi mapping ok
[   24.030406] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:29:crtc-1] flip_done timed out
[   34.270387] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:29:crtc-1] flip_done timed out
[   34.272465] Console: switching to colour frame buffer device 100x30
[   44.510393] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:29:crtc-1] flip_done timed out
[   44.635363] imx-drm display-subsystem: fb0:  frame buffer device
[  OK  ] Started Load/Save Screen Backlight …htness of backlight:backlight-lcd.
[   44.655010] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1
[  OK  ] Started Rebuild Dynamic Linker Cache.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Load/Save Screen Backlight …tness of backlight:backlight-lvds.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
         Starting Update is Completed...
[  OK  ] Reached target Sound Card.
[  OK  ] Started Update is Completed.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Entropy Harvesting Daemon.
         Starting Login Service...
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Service...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily man-db cache update.
[  OK  ] Started Daily verification of password and group files.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Started Login Service.
[  OK  ] Started Network Service.
[   45.549115] Generic PHY 2188000.ethernet-1:06: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet-1:06, irq=-1)
[   45.561136] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started OpenSSH Daemon.
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Serial Getty on ttymxc1.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.

Arch Linux 4.11.0-rc4-1-ARCH (ttymxc1)

alarm login: [   50.686830] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   50.686852] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   55.774400] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:29:crtc-1] flip_done timed out
[   66.014419] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:29:crtc-1] flip_done timed out