Linrad EAPSK63 playback parameters

adwav

/home/daniel/psk63.wav

par_cw

First FFT bandwidth (Hz) [10]
First FFT window (power of sin) [2]
First forward FFT version [0]
First FFT no of b threads [0]
First FFT storage time (s) [1]
First FFT amplitude [2000]
Main waterfall saturate limit [0]
Enable correlation spectrum [0]
Enable second FFT [0]
First backward FFT version [0]
Sellim maxlevel [12000]
First backward FFT att. N [6]
Second FFT bandwidth factor in powers of 2 [2]
Second FFT window (power of sin) [2]
Second forward FFT version [0]
Second forward FFT att. N [7]
Second FFT storage time (s) [5]
Enable AFC/SPUR/DECODE (2=auto spur) [0]
AFC lock range Hz [150]
AFC max drift Hz/minute [100]
Enable Morse decoding [0]
Max no of spurs to cancel [0]
Spur timeconstant (0.1sec) [5]
First mixer bandwidth reduction in powers of 2 [3]
First mixer no of channels [1]
Third FFT window (power of sin) [2]
Baseband storage time (s) [5]
Output delay margin (ms) [100]
Output sampling speed (Hz) [48000]
Default output mode [1]
Audio expander exponent [3]
Baseband waterfall saturate limit [0]
A/D speed [48000]
Check [407]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_cw_bg

ytop [415]
ybottom [830]
xleft [2]
xright [1391]
yborder [671]
fft3 avgnum [29]
pixels/point [1]
coh factor [8]
delay points [4]
AGC flag [0]
AGC attack [2]
AGC release [4]
AGC hang [2]
Waterfall avgnum [1]
Mouse wheel step [13]
Oscill ON [0]
Arrow mode [0]
Filter FIR/FFT [1]
Filter shift [0]
FM mode [0]
FM subtract [0]
FM factor [3]
ch2 phase [0]
Squelch level [0]
Squelch time [0]
Squelch point [0]
check [8880309]
filter flat [1382.812500000000000]
filter curved [0.000000000000000]
yzero [1.000000000000000]
yrange [4096.000000000000000]
dB/pixel [0.622820675373077]
yfac pwr [0.000000125169748]
yfac log [16.055986404418945]
bandwidth [5.566406250000000]
first freq [0.000000000000000]
BFO freq [-1502.929687500000000]
Output gain [0.201533779501915]
Waterfall gain [1.000000000000000]
Waterfall zero [17.000000000000000]
Oscill gain [0.100000001490116]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_cw_cg

ytop [738]
ybottom [854]
xleft [1412]
xright [1474]
Meter graph on [1]
Oscill on [0]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_cw_fg

ytop [824]
ybottom [854]
xleft [1495]
xright [1599]
yborder [839]
direction [1]
gain [0]
gain_inc [0]
fq inc [0.050000000000000002775557561563]
Center freq [7.055000000000000603961325396085]
Tune freq [0.000000000000000000000000000000]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_cw_mg

ytop [609]
ybottom [822]
xleft [1555]
xright [1599]
Scale type [0]
Avgnum [256]
Tracks [0]
Check [1290024]
ygain [22.100000381469727]
yzero [-26.000000000000000]
Cal dBm [0.000000000000000]
Cal S/N [0.000000000000000]
Cal S/N sigshift [0.000000000000000]
Cal S-units [0.000000000000000]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_cw_wg

ytop [2]
ybottom [413]
xleft [0]
xright [1599]
yborder [376]
xpoints per pixel [2]
pixels per xpoint [0]
first xpoint [1194]
xpoints [3104]
avg1num [1]
spek avgnum [3]
waterfall avgnum [10]
spur_inhibit [0]
check [6660024]
yzero [1.000000000000000]
yrange [32768.000000000000000]
wat. db zero [10.000000000000000]
wat. db gain [0.300000011920929]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12

par_linux_screen

MIT-SHM

par_userint

vga mode [12]
Screen width (%) [100]
Screen height (%) [95]
font scale [1]
mouse speed [8]
Max DMA rate [300]
Process priority [0]
Native ALSA [2081]
Rx input mode [-1]
Rx rf channels [0]
Rx ad channels [0]
Rx ad speed [0]
Rx ad device no [-2]
Rx ad mode [0]
Rx da mode [0]
Rx da device no [1]
Rx min da speed [8000]
Rx max da speed [192000]
Rx max da channels [2]
Rx max da bytes [2]
Rx min da channels [1]
Rx min da bytes [2]
Rx soundcard radio [0]
Converter Hz [0]
Converter MHz [0]
Converter mode [0]
network flag [0]
Tx ad speed [0]
Tx da speed [0]
Tx ad device no [-1]
Tx da device no [-1]
Tx da channels [0]
Tx ad channels [0]
Tx da bytes [0]
Tx ad bytes [0]
Tx enable [0]
Tx pilot tone dB [0]
Tx pilot microsec. [0]
Tx soundcard radio [0]
Operator skil [3]
Max blocked CPUs [0]
Timer resolution [0]
Autostart [0]
Rx ad latency [0]
Rx da latency [0]
Tx ad latency [0]
Tx da latency [0]
Sample shift [0]
Min DMA rate [30]
Use ExtIO [0]
ExtIO type [0]
Transceiver mode [0]
PTT control [0]
check [2230408]

Change only between brackets.
If file has errors, Linrad will ignore file and use defaults
or prompt for a complete set of new parameters

Linrad-04.12