Skip to content

Instantly share code, notes, and snippets.

@danpawlik

danpawlik/gist:de8a0726f22b97de72558a59029225ff

Created March 17, 2024 17:40
Show Gist options
  • Save danpawlik/de8a0726f22b97de72558a59029225ff to your computer and use it in GitHub Desktop.
Save danpawlik/de8a0726f22b97de72558a59029225ff to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090]
[ 0.000000] Linux version 6.6.22 (user@b23256e80eba) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r25530+1-51752fa14b) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Sat Mar 16 19:37:37 2024
[ 0.000000] Machine model: Bananapi BPI-R4
[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004304ffff]
[ 0.000000] node 0: [mem 0x0000000043050000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 18 pages/cpu s35048 r8192 d30488 u73728
[ 0.000000] pcpu-alloc: s35048 r8192 d30488 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa7b4000-0x00000000fe7b4000] (64MB)
[ 0.000000] Memory: 4034116K/4194304K available (8768K kernel code, 900K rwdata, 2560K rodata, 384K init, 304K bss, 160188K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 416 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000061] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000068] pid_max: default: 32768 minimum: 301
[ 0.002144] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002158] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.003648] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.003932] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004011] rcu: Hierarchical SRCU implementation.
[ 0.004013] rcu: Max phase no-delay instances is 1000.
[ 0.004290] smp: Bringing up secondary CPUs ...
[ 0.004502] Detected VIPT I-cache on CPU1
[ 0.004537] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.004557] CPU1: Booted secondary processor 0x0000000001 [0x411fd090]
[ 0.004811] Detected VIPT I-cache on CPU2
[ 0.004830] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[ 0.004841] CPU2: Booted secondary processor 0x0000000002 [0x411fd090]
[ 0.005066] Detected VIPT I-cache on CPU3
[ 0.005086] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[ 0.005095] CPU3: Booted secondary processor 0x0000000003 [0x411fd090]
[ 0.005122] smp: Brought up 1 node, 4 CPUs
[ 0.005126] SMP: Total of 4 processors activated.
[ 0.005128] CPU features: detected: 32-bit EL0 Support
[ 0.005130] CPU features: detected: CRC32 instructions
[ 0.005161] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005164] CPU: All CPU(s) started at EL2
[ 0.005165] alternatives: applying system-wide alternatives
[ 0.007985] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.007997] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.008946] pinctrl core: initialized pinctrl subsystem
[ 0.009683] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.009955] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.010057] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.010151] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.010406] thermal_sys: Registered thermal governor 'fair_share'
[ 0.010409] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.010411] thermal_sys: Registered thermal governor 'step_wise'
[ 0.010412] thermal_sys: Registered thermal governor 'user_space'
[ 0.010446] ASID allocator initialised with 65536 entries
[ 0.011161] pstore: Using crash dump compression: deflate
[ 0.011167] printk: console [ramoops-1] enabled
[ 0.011373] pstore: Registered ramoops as persistent store backend
[ 0.011377] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.017653] Modules: 29504 pages in range for non-PLT usage
[ 0.017662] Modules: 521024 pages in range for PLT usage
[ 0.018291] cryptd: max_cpu_qlen set to 1000
[ 0.019012] SCSI subsystem initialized
[ 0.019084] libata version 3.00 loaded.
[ 0.019892] clocksource: Switched to clocksource arch_sys_counter
[ 0.021557] NET: Registered PF_INET protocol family
[ 0.021685] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.024223] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.024246] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.024256] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.024356] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.024765] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.024860] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.024934] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.025261] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.025299] PCI: CLS 0 bytes, default 64
[ 0.026149] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.029794] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.029800] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.050341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.051172] mtk-xsphy soc:xphy@11e10000: failed to get ref_clk(id-1)
[ 0.051651] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 0.051670] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 0.051682] mtk-pcie-gen3 11280000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000
[ 0.051695] mtk-pcie-gen3 11280000.pcie: MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[ 0.051789] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[ 0.051799] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[ 0.051810] mtk-pcie-gen3 11290000.pcie: IO 0x0028000000..0x00281fffff -> 0x0028000000
[ 0.051820] mtk-pcie-gen3 11290000.pcie: MEM 0x0028200000..0x002fffffff -> 0x0028200000
[ 0.051838] /soc/pcie@11290000: Failed to get clk index: 0 ret: -517
[ 0.051846] mtk-pcie-gen3 11290000.pcie: failed to get clocks
[ 0.051907] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[ 0.051917] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[ 0.051927] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000
[ 0.051936] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[ 0.051952] /soc/pcie@11300000: Failed to get clk index: 0 ret: -517
[ 0.051960] mtk-pcie-gen3 11300000.pcie: failed to get clocks
[ 0.052031] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[ 0.052041] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[ 0.052051] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000
[ 0.052060] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000
[ 0.052075] /soc/pcie@11310000: Failed to get clk index: 0 ret: -517
[ 0.052082] mtk-pcie-gen3 11310000.pcie: failed to get clocks
[ 0.056135] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.058124] printk: console [ttyS0] disabled
[ 0.078398] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2
[ 0.078435] printk: console [ttyS0] enabled
[ 0.986502] 11000100.serial: ttyS1 at MMIO 0x11000100 (irq = 100, base_baud = 2500000) is a ST16650V2
[ 1.016354] 11000200.serial: ttyS2 at MMIO 0x11000200 (irq = 101, base_baud = 2500000) is a ST16650V2
[ 1.028051] loop: module loaded
[ 1.032554] spi-nand spi0.0: Winbond SPI NAND was found.
[ 1.037869] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 1.046171] 2 fixed-partitions partitions found on MTD device spi0.0
[ 1.052542] OF: Bad cell count for /soc/spi@11007000/spi_nand@0/partitions
[ 1.059415] OF: Bad cell count for /soc/spi@11007000/spi_nand@0/partitions
[ 1.066428] Creating 2 MTD partitions on "spi0.0":
[ 1.071218] 0x000000000000-0x000000200000 : "bl2"
[ 1.077319] 0x000000200000-0x000008000000 : "ubi"
[ 1.153966] ubi0: default fastmap pool size: 50
[ 1.158493] ubi0: default fastmap WL pool size: 25
[ 1.163280] ubi0: attaching mtd1
[ 1.620008] ubi0: scanning is finished
[ 1.623770] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 1.631089] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 1.771306] i2c_dev: i2c /dev entries driver
[ 1.778505] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.786551] mtk-cpufreq mtk-cpufreq: failed to initialize dvfs info for cpu0
[ 1.794068] mtk-msdc 11230000.mmc: Got CD GPIO
[ 1.794169] NET: Registered PF_INET6 protocol family
[ 1.803893] Segment Routing with IPv6
[ 1.807559] In-situ OAM (IOAM) with IPv6
[ 1.811508] NET: Registered PF_PACKET protocol family
[ 1.816559] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.829574] 8021q: 802.1Q VLAN Support v1.8
[ 1.845294] phy phy-soc:xphy@11e10000.3: type_sw - reg 0x218, index 0
[ 1.852311] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[ 1.859622] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[ 1.865893] mtk-pcie-gen3 11280000.pcie: IO 0x0020000000..0x00201fffff -> 0x0020000000
[ 1.874329] mtk-pcie-gen3 11280000.pcie: MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[ 1.891355] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.902745] mmc0: new high speed SDXC card at address aaaa
[ 1.908777] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
[ 1.916147] Alternate GPT is invalid, using primary GPT.
[ 1.921857] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 2.229915] mtk-pcie-gen3 11280000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[ 2.238718] mtk-pcie-gen3: probe of 11280000.pcie failed with error -110
[ 2.245753] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[ 2.253067] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[ 2.259330] mtk-pcie-gen3 11290000.pcie: IO 0x0028000000..0x00281fffff -> 0x0028000000
[ 2.267764] mtk-pcie-gen3 11290000.pcie: MEM 0x0028200000..0x002fffffff -> 0x0028200000
[ 2.609901] mtk-pcie-gen3 11290000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[ 2.618682] mtk-pcie-gen3: probe of 11290000.pcie failed with error -110
[ 2.625550] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[ 2.632857] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[ 2.639117] mtk-pcie-gen3 11300000.pcie: IO 0x0030000000..0x00301fffff -> 0x0030000000
[ 2.647549] mtk-pcie-gen3 11300000.pcie: MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[ 2.922621] mtk-pcie-gen3 11300000.pcie: set IO trans window[0]: cpu_addr = 0x30000000, pci_addr = 0x30000000, size = 0x200000
[ 2.934002] mtk-pcie-gen3 11300000.pcie: set MEM trans window[1]: cpu_addr = 0x30200000, pci_addr = 0x30200000, size = 0x200000
[ 2.945466] mtk-pcie-gen3 11300000.pcie: set MEM trans window[2]: cpu_addr = 0x30400000, pci_addr = 0x30400000, size = 0x400000
[ 2.956930] mtk-pcie-gen3 11300000.pcie: set MEM trans window[3]: cpu_addr = 0x30800000, pci_addr = 0x30800000, size = 0x800000
[ 2.968392] mtk-pcie-gen3 11300000.pcie: set MEM trans window[4]: cpu_addr = 0x31000000, pci_addr = 0x31000000, size = 0x1000000
[ 2.979942] mtk-pcie-gen3 11300000.pcie: set MEM trans window[5]: cpu_addr = 0x32000000, pci_addr = 0x32000000, size = 0x2000000
[ 2.991492] mtk-pcie-gen3 11300000.pcie: set MEM trans window[6]: cpu_addr = 0x34000000, pci_addr = 0x34000000, size = 0x4000000
[ 3.003288] mtk-pcie-gen3 11300000.pcie: PCI host bridge to bus 0000:00
[ 3.009903] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.015379] pci_bus 0000:00: root bus resource [io 0x400000-0x5fffff] (bus address [0x30000000-0x301fffff])
[ 3.025194] pci_bus 0000:00: root bus resource [mem 0x30200000-0x37ffffff]
[ 3.032059] pci_bus 0000:00: scanning bus
[ 3.036077] pci 0000:00:00.0: [14c3:7988] type 01 class 0x060400
[ 3.042087] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 3.048925] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.055010] pci 0000:00:00.0: PME# disabled
[ 3.060332] pci_bus 0000:00: fixups for bus
[ 3.064507] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 3.071199] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.079195] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 3.085933] pci_bus 0000:01: scanning bus
[ 3.139938] pci_bus 0000:01: fixups for bus
[ 3.144110] pci_bus 0000:01: bus scan returning with max=01
[ 3.149670] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.156279] pci_bus 0000:00: bus scan returning with max=01
[ 3.161852] pci 0000:00:00.0: BAR 0: assigned [mem 0x30200000-0x30207fff 64bit]
[ 3.169155] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.174124] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 3.182618] pcieport 0000:00:00.0: assign IRQ: got 112
[ 3.187750] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.193843] pcieport 0000:00:00.0: enabling bus mastering
[ 3.199567] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0
[ 3.208003] mtk-pcie-gen3 11300000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11300c00 data 1
[ 3.216430] mtk-pcie-gen3 11300000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11300c00 data 2
[ 3.224857] mtk-pcie-gen3 11300000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11300c00 data 3
[ 3.233282] mtk-pcie-gen3 11300000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11300c00 data 4
[ 3.241708] mtk-pcie-gen3 11300000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11300c00 data 5
[ 3.250135] mtk-pcie-gen3 11300000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11300c00 data 6
[ 3.258559] mtk-pcie-gen3 11300000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11300c00 data 7
[ 3.266989] mtk-pcie-gen3 11300000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11300c00 data 8
[ 3.275414] mtk-pcie-gen3 11300000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11300c00 data 9
[ 3.283840] mtk-pcie-gen3 11300000.pcie: msi#0xa address_hi 0x0 address_lo 0x11300c00 data 10
[ 3.292353] mtk-pcie-gen3 11300000.pcie: msi#0xb address_hi 0x0 address_lo 0x11300c00 data 11
[ 3.300865] mtk-pcie-gen3 11300000.pcie: msi#0xc address_hi 0x0 address_lo 0x11300c00 data 12
[ 3.309375] mtk-pcie-gen3 11300000.pcie: msi#0xd address_hi 0x0 address_lo 0x11300c00 data 13
[ 3.317887] mtk-pcie-gen3 11300000.pcie: msi#0xe address_hi 0x0 address_lo 0x11300c00 data 14
[ 3.326400] mtk-pcie-gen3 11300000.pcie: msi#0xf address_hi 0x0 address_lo 0x11300c00 data 15
[ 3.334912] mtk-pcie-gen3 11300000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11300c00 data 16
[ 3.343512] mtk-pcie-gen3 11300000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11300c00 data 17
[ 3.352110] mtk-pcie-gen3 11300000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11300c00 data 18
[ 3.360711] mtk-pcie-gen3 11300000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11300c00 data 19
[ 3.369309] mtk-pcie-gen3 11300000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11300c00 data 20
[ 3.377908] mtk-pcie-gen3 11300000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11300c00 data 21
[ 3.386509] mtk-pcie-gen3 11300000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11300c00 data 22
[ 3.395108] mtk-pcie-gen3 11300000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11300c00 data 23
[ 3.403706] mtk-pcie-gen3 11300000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11300c00 data 24
[ 3.412305] mtk-pcie-gen3 11300000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11300c00 data 25
[ 3.420904] mtk-pcie-gen3 11300000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11300c00 data 26
[ 3.429500] mtk-pcie-gen3 11300000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11300c00 data 27
[ 3.438099] mtk-pcie-gen3 11300000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11300c00 data 28
[ 3.446698] mtk-pcie-gen3 11300000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11300c00 data 29
[ 3.455296] mtk-pcie-gen3 11300000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11300c00 data 30
[ 3.463894] mtk-pcie-gen3 11300000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11300c00 data 31
[ 3.472901] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0
[ 3.481399] pcieport 0000:00:00.0: PME: Signaling with IRQ 113
[ 3.487330] pcieport 0000:00:00.0: AER: enabled with IRQ 113
[ 3.493038] pcieport 0000:00:00.0: save config 0x00: 0x798814c3
[ 3.498949] pcieport 0000:00:00.0: save config 0x04: 0x00100406
[ 3.504863] pcieport 0000:00:00.0: save config 0x08: 0x06040001
[ 3.510773] pcieport 0000:00:00.0: save config 0x0c: 0x00010000
[ 3.516681] pcieport 0000:00:00.0: save config 0x10: 0x30200004
[ 3.522590] pcieport 0000:00:00.0: save config 0x14: 0x00000000
[ 3.528497] pcieport 0000:00:00.0: save config 0x18: 0x00010100
[ 3.534406] pcieport 0000:00:00.0: save config 0x1c: 0x000001f1
[ 3.540315] pcieport 0000:00:00.0: save config 0x20: 0x0000fff0
[ 3.546223] pcieport 0000:00:00.0: save config 0x24: 0x0001fff1
[ 3.552132] pcieport 0000:00:00.0: save config 0x28: 0x00000000
[ 3.558040] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
[ 3.563949] pcieport 0000:00:00.0: save config 0x30: 0x00000000
[ 3.569856] pcieport 0000:00:00.0: save config 0x34: 0x00000080
[ 3.575766] pcieport 0000:00:00.0: save config 0x38: 0x00000000
[ 3.581675] pcieport 0000:00:00.0: save config 0x3c: 0x00020170
[ 3.587885] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[ 3.595198] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[ 3.601464] mtk-pcie-gen3 11310000.pcie: IO 0x0038000000..0x00381fffff -> 0x0038000000
[ 3.609897] mtk-pcie-gen3 11310000.pcie: MEM 0x0038200000..0x003fffffff -> 0x0038200000
[ 3.852567] mtk-pcie-gen3 11310000.pcie: set IO trans window[0]: cpu_addr = 0x38000000, pci_addr = 0x38000000, size = 0x200000
[ 3.863950] mtk-pcie-gen3 11310000.pcie: set MEM trans window[1]: cpu_addr = 0x38200000, pci_addr = 0x38200000, size = 0x200000
[ 3.875414] mtk-pcie-gen3 11310000.pcie: set MEM trans window[2]: cpu_addr = 0x38400000, pci_addr = 0x38400000, size = 0x400000
[ 3.886877] mtk-pcie-gen3 11310000.pcie: set MEM trans window[3]: cpu_addr = 0x38800000, pci_addr = 0x38800000, size = 0x800000
[ 3.898340] mtk-pcie-gen3 11310000.pcie: set MEM trans window[4]: cpu_addr = 0x39000000, pci_addr = 0x39000000, size = 0x1000000
[ 3.909889] mtk-pcie-gen3 11310000.pcie: set MEM trans window[5]: cpu_addr = 0x3a000000, pci_addr = 0x3a000000, size = 0x2000000
[ 3.921438] mtk-pcie-gen3 11310000.pcie: set MEM trans window[6]: cpu_addr = 0x3c000000, pci_addr = 0x3c000000, size = 0x4000000
[ 3.933100] mtk-pcie-gen3 11310000.pcie: PCI host bridge to bus 0001:00
[ 3.939705] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 3.945185] pci_bus 0001:00: root bus resource [io 0x600000-0x7fffff] (bus address [0x38000000-0x381fffff])
[ 3.955001] pci_bus 0001:00: root bus resource [mem 0x38200000-0x3fffffff]
[ 3.961866] pci_bus 0001:00: scanning bus
[ 3.965882] pci 0001:00:00.0: [14c3:7988] type 01 class 0x060400
[ 3.971894] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 3.978731] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.984817] pci 0001:00:00.0: PME# disabled
[ 3.990168] pci_bus 0001:00: fixups for bus
[ 3.994342] pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[ 4.001034] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.009029] pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[ 4.015768] pci_bus 0001:01: scanning bus
[ 4.019792] pci 0001:01:00.0: [14c3:7961] type 00 class 0x028000
[ 4.025814] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 4.033041] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[ 4.040266] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 4.047578] pci 0001:01:00.0: supports D1 D2
[ 4.051840] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.058444] pci 0001:01:00.0: PME# disabled
[ 4.089937] pci_bus 0001:01: fixups for bus
[ 4.094113] pci_bus 0001:01: bus scan returning with max=01
[ 4.099675] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 4.106287] pci_bus 0001:00: bus scan returning with max=01
[ 4.111862] pci 0001:00:00.0: BAR 9: assigned [mem 0x38200000-0x383fffff 64bit pref]
[ 4.119594] pci 0001:00:00.0: BAR 0: assigned [mem 0x38400000-0x38407fff 64bit]
[ 4.126900] pci 0001:01:00.0: BAR 0: assigned [mem 0x38200000-0x382fffff 64bit pref]
[ 4.134644] pci 0001:01:00.0: BAR 2: assigned [mem 0x38300000-0x38303fff 64bit pref]
[ 4.142388] pci 0001:01:00.0: BAR 4: assigned [mem 0x38304000-0x38304fff 64bit pref]
[ 4.150133] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 4.155089] pci 0001:00:00.0: bridge window [mem 0x38200000-0x383fffff 64bit pref]
[ 4.162831] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 4.171275] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 4.179775] pcieport 0001:00:00.0: assign IRQ: got 115
[ 4.184912] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 4.191006] pcieport 0001:00:00.0: enabling bus mastering
[ 4.196727] mtk-pcie-gen3 11310000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11310c00 data 0
[ 4.205162] mtk-pcie-gen3 11310000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11310c00 data 1
[ 4.213590] mtk-pcie-gen3 11310000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11310c00 data 2
[ 4.222015] mtk-pcie-gen3 11310000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11310c00 data 3
[ 4.230441] mtk-pcie-gen3 11310000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11310c00 data 4
[ 4.238864] mtk-pcie-gen3 11310000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11310c00 data 5
[ 4.247288] mtk-pcie-gen3 11310000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11310c00 data 6
[ 4.255714] mtk-pcie-gen3 11310000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11310c00 data 7
[ 4.264138] mtk-pcie-gen3 11310000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11310c00 data 8
[ 4.272566] mtk-pcie-gen3 11310000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11310c00 data 9
[ 4.280991] mtk-pcie-gen3 11310000.pcie: msi#0xa address_hi 0x0 address_lo 0x11310c00 data 10
[ 4.289501] mtk-pcie-gen3 11310000.pcie: msi#0xb address_hi 0x0 address_lo 0x11310c00 data 11
[ 4.298014] mtk-pcie-gen3 11310000.pcie: msi#0xc address_hi 0x0 address_lo 0x11310c00 data 12
[ 4.306525] mtk-pcie-gen3 11310000.pcie: msi#0xd address_hi 0x0 address_lo 0x11310c00 data 13
[ 4.315038] mtk-pcie-gen3 11310000.pcie: msi#0xe address_hi 0x0 address_lo 0x11310c00 data 14
[ 4.323551] mtk-pcie-gen3 11310000.pcie: msi#0xf address_hi 0x0 address_lo 0x11310c00 data 15
[ 4.332062] mtk-pcie-gen3 11310000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11310c00 data 16
[ 4.340661] mtk-pcie-gen3 11310000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11310c00 data 17
[ 4.349258] mtk-pcie-gen3 11310000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11310c00 data 18
[ 4.357858] mtk-pcie-gen3 11310000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11310c00 data 19
[ 4.366456] mtk-pcie-gen3 11310000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11310c00 data 20
[ 4.375055] mtk-pcie-gen3 11310000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11310c00 data 21
[ 4.383653] mtk-pcie-gen3 11310000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11310c00 data 22
[ 4.392254] mtk-pcie-gen3 11310000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11310c00 data 23
[ 4.400852] mtk-pcie-gen3 11310000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11310c00 data 24
[ 4.409449] mtk-pcie-gen3 11310000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11310c00 data 25
[ 4.418048] mtk-pcie-gen3 11310000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11310c00 data 26
[ 4.426647] mtk-pcie-gen3 11310000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11310c00 data 27
[ 4.435246] mtk-pcie-gen3 11310000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11310c00 data 28
[ 4.443845] mtk-pcie-gen3 11310000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11310c00 data 29
[ 4.452444] mtk-pcie-gen3 11310000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11310c00 data 30
[ 4.461042] mtk-pcie-gen3 11310000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11310c00 data 31
[ 4.470078] mtk-pcie-gen3 11310000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11310c00 data 0
[ 4.478571] pcieport 0001:00:00.0: PME: Signaling with IRQ 116
[ 4.484510] pcieport 0001:00:00.0: AER: enabled with IRQ 116
[ 4.490226] pcieport 0001:00:00.0: save config 0x00: 0x798814c3
[ 4.496137] pcieport 0001:00:00.0: save config 0x04: 0x00100406
[ 4.502049] pcieport 0001:00:00.0: save config 0x08: 0x06040001
[ 4.507956] pcieport 0001:00:00.0: save config 0x0c: 0x00010000
[ 4.513867] pcieport 0001:00:00.0: save config 0x10: 0x38400004
[ 4.519773] pcieport 0001:00:00.0: save config 0x14: 0x00000000
[ 4.525683] pcieport 0001:00:00.0: save config 0x18: 0x00010100
[ 4.531593] pcieport 0001:00:00.0: save config 0x1c: 0x000001f1
[ 4.537501] pcieport 0001:00:00.0: save config 0x20: 0x0000fff0
[ 4.543410] pcieport 0001:00:00.0: save config 0x24: 0x38313821
[ 4.549317] pcieport 0001:00:00.0: save config 0x28: 0x00000000
[ 4.555225] pcieport 0001:00:00.0: save config 0x2c: 0x00000000
[ 4.561135] pcieport 0001:00:00.0: save config 0x30: 0x00000000
[ 4.567042] pcieport 0001:00:00.0: save config 0x34: 0x00000080
[ 4.572950] pcieport 0001:00:00.0: save config 0x38: 0x00000000
[ 4.578858] pcieport 0001:00:00.0: save config 0x3c: 0x00020173
[ 4.585684] FIT: Detected U-Boot 2024.01-OpenWrt-r25423+1-677c3f1ef8
[ 4.592039] FIT: Selected configuration: "config-mt7988a-bananapi-bpi-r4" (OpenWrt bananapi_bpi-r4)
[ 4.601080] FIT: kernel sub-image 0x00001000..0x0058644f "kernel-1" (ARM64 OpenWrt Linux-6.6.22)
[ 4.610816] FIT: flat_dt sub-image 0x00587000..0x0059185a "fdt-1" (ARM64 OpenWrt bananapi_bpi-r4 device tree blob)
[ 4.622026] FIT: flat_dt sub-image 0x00592000..0x00592611 "fdt-mt7988a-bananapi-bpi-r4-emmc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-emmc)
[ 4.638355] FIT: flat_dt sub-image 0x00593000..0x0059311c "fdt-mt7988a-bananapi-bpi-r4-rtc" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-rtc)
[ 4.654510] FIT: flat_dt sub-image 0x00594000..0x005945c9 "fdt-mt7988a-bananapi-bpi-r4-sd" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-sd)
[ 4.670491] FIT: flat_dt sub-image 0x00595000..0x005958eb "fdt-mt7988a-bananapi-bpi-r4-wifi-mt7996a" (ARM64 OpenWrt bananapi_bpi-r4 device tree overlay mt7988a-bananapi-bpi-r4-wifi-mt7996a)
[ 4.688205] FIT: filesystem sub-image 0x00596000..0x0158efff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r4 rootfs)
[ 4.699040] block mmcblk0p7: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
[ 4.706764] block mmcblk0p7: mapped remaing space as /dev/fitrw
[ 4.841384] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[ 4.849573] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[ 4.857752] mtk_soc_eth 15100000.ethernet: generated random MAC address 65:74:68:25:64:00
[ 4.868058] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc082880000, irq 103
[ 4.877717] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc082880000, irq 103
[ 4.887359] mtk_soc_eth 15100000.ethernet eth2: mediatek frame engine at 0xffffffc082880000, irq 103
[ 4.981132] mt7530-mmio 15020000.switch: configuring for fixed/internal link mode
[ 4.988632] mt7530-mmio 15020000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[ 5.013050] mt7530-mmio 15020000.switch wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7988 PHY] (irq=118)
[ 5.048496] mt7530-mmio 15020000.switch lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7988 PHY] (irq=119)
[ 5.083869] mt7530-mmio 15020000.switch lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7988 PHY] (irq=120)
[ 5.119179] mt7530-mmio 15020000.switch lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7988 PHY] (irq=121)
[ 5.130162] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[ 5.136869] DSA: tree 0 setup
[ 5.140470] UBI error: no valid UBI magic found inside mtd1
[ 5.146093] clk: Disabling unused clocks
[ 5.154203] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[ 5.161426] Freeing unused kernel memory: 384K
[ 5.239933] Run /sbin/init as init process
[ 5.244020] with arguments:
[ 5.246976] /sbin/init
[ 5.249672] with environment:
[ 5.252807] HOME=/
[ 5.255155] TERM=linux
[ 5.383611] init: Console is alive
[ 5.387104] init: - watchdog -
[ 5.793564] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.807823] pps_core: LinuxPPS API ver. 1 registered
[ 5.812804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.823612] PTP clock support registered
[ 5.830493] usbcore: registered new interface driver usbfs
[ 5.836000] usbcore: registered new interface driver hub
[ 5.841385] usbcore: registered new device driver usb
[ 5.846957] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 5.856866] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[ 5.864274] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[ 5.872191] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.877422] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[ 5.887867] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[ 5.897021] xhci-mtk 11200000.usb: irq 122, io mem 0x11200000
[ 5.902845] xhci-mtk 11200000.usb: xHCI Host Controller
[ 5.908061] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[ 5.915457] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[ 5.922795] hub 1-0:1.0: USB hub found
[ 5.926555] hub 1-0:1.0: 1 port detected
[ 5.930663] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.938934] hub 2-0:1.0: USB hub found
[ 5.942700] hub 2-0:1.0: 1 port detected
[ 5.949081] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.962959] init: - preinit -
[ 6.199846] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[ 6.208037] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[ 6.215364] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[ 6.225453] mt7530-mmio 15020000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.389903] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 6.572597] hub 1-1:1.0: USB hub found
[ 6.576518] hub 1-1:1.0: 5 ports detected
[ 6.720422] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[ 6.759702] hub 2-1:1.0: USB hub found
[ 6.763681] hub 2-1:1.0: 4 ports detected
[ 7.319899] usb 1-1.2: new high-speed USB device number 3 using xhci-mtk
[ 7.649893] usb 1-1.3: new full-speed USB device number 4 using xhci-mtk
[ 7.929891] usb 1-1.5: new high-speed USB device number 5 using xhci-mtk
[ 8.332673] mount_root: loading kmods from internal overlay
[ 8.346038] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 8.355354] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 8.632632] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 8.639488] block: unable to load configuration (fstab: Entry not found)
[ 8.646226] block: attempting to load /tmp/overlay/etc/config/fstab
[ 8.652539] block: unable to load configuration (fstab: Entry not found)
[ 8.659265] block: attempting to load /etc/config/fstab
[ 8.665543] block: unable to load configuration (fstab: Entry not found)
[ 8.672297] block: no usable configuration
[ 8.676571] block: attempting to load /etc/config/fstab
[ 8.681838] block: unable to load configuration (fstab: Entry not found)
[ 8.688563] block: no usable configuration
[ 8.841985] EXT4-fs (fitrw): recovery complete
[ 8.848224] EXT4-fs (fitrw): mounted filesystem 197f08de-1dd2-11b2-806b-e65780748f29 r/w with ordered data mode. Quota mode: disabled.
[ 8.961363] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 8.969021] block: extroot: not configured
[ 8.973322] block: attempting to load /etc/config/fstab
[ 8.978593] block: unable to load configuration (fstab: Entry not found)
[ 8.985334] block: no usable configuration
[ 8.989816] mount_root: switching to ext4 overlay
[ 8.996750] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 9.007736] urandom-seed: Seeding with /etc/urandom.seed
[ 9.029345] mt7530-mmio 15020000.switch lan1: Link is Down
[ 9.035491] random: procd: uninitialized urandom read (4 bytes read)
[ 9.040011] procd: - early -
[ 9.044798] procd: - watchdog -
[ 9.199927] random: crng init done
[ 9.587047] procd: - watchdog -
[ 9.593256] procd: - ubus -
[ 9.750108] procd: - init -
[ 9.957361] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.987056] pca954x 1-0070: supply vdd not found, using dummy regulator
[ 9.994377] i2c i2c-1: Added multiplexed i2c bus 2
[ 9.999252] i2c i2c-1: Added multiplexed i2c bus 3
[ 10.004143] i2c i2c-1: Added multiplexed i2c bus 4
[ 10.008998] i2c i2c-1: Added multiplexed i2c bus 5
[ 10.009349] urngd: v1.0.2 started.
[ 10.013806] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[ 10.026782] GACT probability on
[ 10.030617] Mirror/redirect action on
[ 10.036552] u32 classifier
[ 10.039266] input device check on
[ 10.042927] Actions configured
[ 10.049648] crypto-safexcel 15600000.crypto: can't request region for resource [mem 0x15600000-0x1577ffff]
[ 10.059319] crypto-safexcel 15600000.crypto: failed to get resource
[ 10.065586] crypto-safexcel: probe of 15600000.crypto failed with error -16
[ 10.077798] at24 2-0050: supply vcc not found, using dummy regulator
[ 10.111928] at24 2-0057: supply vcc not found, using dummy regulator
[ 10.118981] at24 2-0057: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 10.126538] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[ 10.134029] Backport generated by backports.git 193becf2
[ 10.145555] sfp sfp1: Host maximum power 3.0W
[ 10.150498] sfp sfp2: Host maximum power 3.0W
[ 10.160242] xt_time: kernel timezone is -0000
[ 10.173403] Intel(R) Wireless WiFi driver for Linux
[ 10.209438] PPP generic driver version 2.4.2
[ 10.214347] NET: Registered PF_PPPOX protocol family
[ 10.220740] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 10.228572] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 10.246331] mt7921e 0001:01:00.0: assign IRQ: got 115
[ 10.251410] mt7921e 0001:01:00.0: enabling device (0000 -> 0002)
[ 10.257445] mt7921e 0001:01:00.0: enabling bus mastering
[ 10.262838] mtk-pcie-gen3 11310000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11310c00 data 1
[ 10.361904] mt7921e 0001:01:00.0: ASIC revision: 79610010
[ 10.455936] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.473172] mt7921e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20231109190918a
[ 10.473172]
[ 10.490171] sfp sfp1: module OEM SFP-2.5G-T rev 1.0 sn SKY2307120002 dc 230712
[ 10.499594] mtk_soc_eth 15100000.ethernet eth2: switched to inband/2500base-x link mode
[ 10.531084] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 10.752583] mt7921e 0001:01:00.0: WM Firmware Version: ____010000, Build Time: 20231109190959
[ 12.676087] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 12.689951] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[ 12.698097] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[ 12.700159] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[ 12.715318] br-lan: port 1(lan1) entered blocking state
[ 12.720588] br-lan: port 1(lan1) entered disabled state
[ 12.725841] mt7530-mmio 15020000.switch lan1: entered allmulticast mode
[ 12.732480] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
[ 12.739479] mt7530-mmio 15020000.switch lan1: entered promiscuous mode
[ 12.752127] mt7530-mmio 15020000.switch lan2: configuring for phy/internal link mode
[ 12.760217] br-lan: port 2(lan2) entered blocking state
[ 12.765448] br-lan: port 2(lan2) entered disabled state
[ 12.770827] mt7530-mmio 15020000.switch lan2: entered allmulticast mode
[ 12.777621] mt7530-mmio 15020000.switch lan2: entered promiscuous mode
[ 12.787305] mt7530-mmio 15020000.switch lan3: configuring for phy/internal link mode
[ 12.795790] br-lan: port 3(lan3) entered blocking state
[ 12.801066] br-lan: port 3(lan3) entered disabled state
[ 12.806316] mt7530-mmio 15020000.switch lan3: entered allmulticast mode
[ 12.813180] mt7530-mmio 15020000.switch lan3: entered promiscuous mode
[ 12.821616] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/10gbase-r link mode
[ 12.853881] br-lan: port 4(eth1) entered blocking state
[ 12.859117] br-lan: port 4(eth1) entered disabled state
[ 12.864375] mtk_soc_eth 15100000.ethernet eth1: entered allmulticast mode
[ 12.871280] mtk_soc_eth 15100000.ethernet eth1: entered promiscuous mode
[ 12.880145] sfp sfp1: Unable to ascertain link mode
[ 12.885039] mtk_soc_eth 15100000.ethernet eth2: selection of interface failed, advertisement 00,00000000,00008000,00006400
[ 12.896285] mtk_soc_eth 15100000.ethernet eth2: configuring for inband/2500base-x link mode
[ 12.909632] br-wan: port 1(eth2) entered blocking state
[ 12.914881] br-wan: port 1(eth2) entered disabled state
[ 12.920144] mtk_soc_eth 15100000.ethernet eth2: entered allmulticast mode
[ 12.927037] mtk_soc_eth 15100000.ethernet eth2: entered promiscuous mode
[ 12.937817] mt7530-mmio 15020000.switch wan: configuring for phy/internal link mode
[ 12.946765] br-wan: port 2(wan) entered blocking state
[ 12.951929] br-wan: port 2(wan) entered disabled state
[ 12.957091] mt7530-mmio 15020000.switch wan: entered allmulticast mode
[ 12.963792] mt7530-mmio 15020000.switch wan: entered promiscuous mode
[ 15.142471] br-lan: port 5(phy0-ap0) entered blocking state
[ 15.148129] br-lan: port 5(phy0-ap0) entered disabled state
[ 15.153799] mt7921e 0001:01:00.0 phy0-ap0: entered allmulticast mode
[ 15.160330] mt7921e 0001:01:00.0 phy0-ap0: entered promiscuous mode
[ 15.166768] br-lan: port 5(phy0-ap0) entered blocking state
[ 15.172372] br-lan: port 5(phy0-ap0) entered listening state
[ 15.178272] br-lan: port 5(phy0-ap0) entered disabled state
[ 15.452600] mt7530-mmio 15020000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 15.460937] br-lan: port 1(lan1) entered blocking state
[ 15.466163] br-lan: port 1(lan1) entered listening state
[ 16.253340] mt7530-mmio 15020000.switch wan: Link is Up - 1Gbps/Full - flow control off
[ 16.261393] br-wan: port 2(wan) entered blocking state
[ 16.266526] br-wan: port 2(wan) entered forwarding state
[ 16.271993] br-lan: port 5(phy0-ap0) entered blocking state
[ 16.277561] br-lan: port 5(phy0-ap0) entered listening state
[ 23.529895] br-lan: port 1(lan1) entered learning state
[ 24.809896] br-lan: port 5(phy0-ap0) entered learning state
[ 31.859899] br-lan: port 1(lan1) entered forwarding state
[ 31.865315] br-lan: topology change detected, propagating
[ 32.127089] br-lan: port 1(lan1) received tcn bpdu
[ 32.131907] br-lan: topology change detected, propagating
[ 33.129916] br-lan: port 5(phy0-ap0) entered forwarding state
[ 33.135676] br-lan: topology change detected, propagating
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment