Skip to content

Instantly share code, notes, and snippets.

@david415
Created January 5, 2014 22:19
Show Gist options
  • Star 1 You must be signed in to star a gist
  • Fork 1 You must be signed in to fork a gist
  • Save david415/8274711 to your computer and use it in GitHub Desktop.
Save david415/8274711 to your computer and use it in GitHub Desktop.
/etc/defaults/ufw
# /etc/default/ufw
#
# Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback
# accepted). You will need to 'disable' and then 'enable' the firewall for
# the changes to take affect.
IPV6=yes
# Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT.
# ACCEPT enables connection tracking for NEW inbound packets on the INPUT
# chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note
# that if you change this you will most likely want to adjust your rules.
DEFAULT_INPUT_POLICY="DROP"
# Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT.
# ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT
# chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note
# that if you change this you will most likely want to adjust your rules.
DEFAULT_OUTPUT_POLICY="REJECT"
# Set the default forward policy to ACCEPT, DROP or REJECT. Please note that
# if you change this you will most likely want to adjust your rules
DEFAULT_FORWARD_POLICY="DROP"
# Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please
# note that setting this to ACCEPT may be a security risk. See 'man ufw' for
# details
DEFAULT_APPLICATION_POLICY="SKIP"
# By default, ufw only touches its own chains. Set this to 'yes' to have ufw
# manage the built-in chains too. Warning: setting this to 'yes' will break
# non-ufw managed firewall rules
MANAGE_BUILTINS=no
#
# IPT backend
#
# only enable if using iptables backend
IPT_SYSCTL=/etc/ufw/sysctl.conf
# Extra connection tracking modules to load. Complete list can be found in
# net/netfilter/Kconfig of your kernel source. Some common modules:
# nf_conntrack_irc, nf_nat_irc: DCC (Direct Client to Client) support
# nf_conntrack_netbios_ns: NetBIOS (samba) client support
# nf_conntrack_pptp, nf_nat_pptp: PPTP over stateful firewall/NAT
# nf_conntrack_ftp, nf_nat_ftp: active FTP support
# nf_conntrack_tftp, nf_nat_tftp: TFTP support (server side)
IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_netbios_ns"
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment