This document now exists on the official ASP.NET core docs page.
- Application
- Request Handling
- Authorization
- CORS
- OpenAPI
- Advanced
var app = WebApplication.Create(args);
app.MapGet("/", () => "Hello World");
app.Run();
This listens to port http://localhost:5000 and https://localhost:5001 by default.
var app = WebApplication.Create(args);
app.MapGet("/", () => "Hello World");
app.Run("http://localhost:3000");
var app = WebApplication.Create(args);
app.Urls.Add("http://localhost:3000");
app.Urls.Add("http://localhost:4000");
app.MapGet("/", () => "Hello World");
app.Run();
var app = WebApplication.Create(args);
var port = Environment.GetEnvironmentVariable("PORT") ?? "3000";
app.MapGet("/", () => "Hello World");
app.Run($"http://localhost:{port}");
You can set the ASPNETCORE_URLS
environment variable to change the address:
ASPNETCORE_URLS=http://localhost:3000
This supports multiple urls:
ASPNETCORE_URLS=http://localhost:3000;https://localhost:5000
var app = WebApplication.Create(args);
app.Urls.Add("http://*:3000");
app.MapGet("/", () => "Hello World");
app.Run();
var app = WebApplication.Create(args);
app.Urls.Add("http://+:3000");
app.MapGet("/", () => "Hello World");
app.Run();
var app = WebApplication.Create(args);
app.Urls.Add("http://0.0.0.0:3000");
app.MapGet("/", () => "Hello World");
app.Run();
This syntax also works in the environment variables:
ASPNETCORE_URLS=http://*:3000;https://+:5000;http://0.0.0.0:5005
var app = WebApplication.Create(args);
app.Urls.Add("https://localhost:3000");
app.MapGet("/", () => "Hello World");
app.Run();
Using appsettings.json
{
"Kestrel" :{
"Certificates": {
"Default": {
"Path": "cert.pem",
"KeyPath": "key.pem"
}
}
}
}
Configuration via code
var builder = WebApplication.CreateBuilder(args);
// Configure the cert and the key
builder.Configuration["Kestrel:Certificates:Default:Path"] = "cert.pem";
builder.Configuration["Kestrel:Certificates:Default:KeyPath"] = "key.pem";
var app = builder.Build();
app.Urls.Add("https://localhost:3000");
app.MapGet("/", () => "Hello World");
app.Run();
Using the certificate APIs
using System.Security.Cryptography.X509Certificates;
var builder = WebApplication.CreateBuilder(args);
builder.WebHost.ConfigureKestrel(options =>
{
options.ConfigureHttpsDefaults(httpsOptions =>
{
var certPath = Path.Combine(builder.Environment.ContentRootPath, "cert.pem");
var keyPath = Path.Combine(builder.Environment.ContentRootPath, "key.pem");
httpsOptions.ServerCertificate = X509Certificate2.CreateFromPemFile(certPath, keyPath);
});
});
var app = builder.Build();
app.Urls.Add("https://localhost:3000");
app.MapGet("/", () => "Hello World");
app.Run();
var app = WebApplication.Create(args);
if (!app.Environment.IsDevelopment())
{
app.UseExceptionHandler("/oops");
}
app.MapGet("/", () => "Hello World");
app.MapGet("/oops", () => "Oops! An error happened.");
app.Run();
var app = WebApplication.Create(args);
Console.WriteLine($"The configuration value is {app.Configuration["key"]}");
app.Run();
var app = WebApplication.Create(args);
app.Logger.LogInformation("The application started");
app.Run();
var builder = WebApplication.CreateBuilder(new WebApplicationOptions
{
ApplicationName = typeof(Program).Assembly.FullName,
ContentRootPath = Directory.GetCurrentDirectory(),
EnvironmentName = Environments.Staging
});
Console.WriteLine($"Application Name: {builder.Environment.ApplicationName}");
Console.WriteLine($"Environment Name: {builder.Environment.EnvironmentName}");
Console.WriteLine($"ContentRoot Path: {builder.Environment.ContentRootPath}");
var app = builder.Build();
These may also be specified via the following environment variables:
ASPNETCORE_ENVIRONMENT
ASPNETCORE_CONTENTROOT
ASPNETCORE_APPLICATIONNAME
OR via command line arguments:
--applicationName
--environment
--contentRoot
var builder = WebApplication.CreateBuilder(args);
builder.Configuration.AddIniFile("appsettings.ini");
var app = builder.Build();
By default the WebApplicationBuilder
reads configuration from:
appSettings.json
appSettings.{environment}.json
- environment variables
- The command line
var builder = WebApplication.CreateBuilder(args);
// Reads the ConnectionStrings section of configuration and looks for a sub key called Todos
var connectionString = builder.Configuration.GetConnectionString("Todos");
Console.WriteLine($"My connection string is {connectionString}");
var app = builder.Build();
var builder = WebApplication.CreateBuilder(args);
if (builder.Environment.IsDevelopment())
{
Console.WriteLine($"Running in development");
}
var app = builder.Build();
var builder = WebApplication.CreateBuilder(args);
// Configure JSON logging to the console
builder.Logging.AddJsonConsole();
var app = builder.Build();
var builder = WebApplication.CreateBuilder(args);
// Add the memory cache services
builder.Services.AddMemoryCache();
// Add a custom scoped service
builder.Services.AddScoped<ITodoRepository, TodoRepository>();
var app = builder.Build();
Existing extension methods on IHostBuilder
can be accessed using the Host
property.
var builder = WebApplication.CreateBuilder(args);
// Wait 30 seconds for graceful shutdown
builder.Host.ConfigureHostOptions(o => o.ShutdownTimeout = TimeSpan.FromSeconds(30));
var app = builder.Build();
Existing extension methods on IWebHostBuilder
can be accessed using the WebHost
property.
var builder = WebApplication.CreateBuilder(args);
// Change the HTTP server implemenation to be HTTP.sys based
builder.WebHost.UseHttpSys();
var app = builder.Build();
By default, the web root is relative to the content root in the wwwroot
folder. This is where the static files
middleware expects to find static files. You can change this by using the UseWebRoot
method on the WebHost
property:
var builder = WebApplication.CreateBuilder(args);
// Look for static files in webroot
builder.WebHost.UseWebRoot("webroot");
var app = builder.Build();
This example uses Autofac
var builder = WebApplication.CreateBuilder(args);
builder.Host.UseServiceProviderFactory(new AutofacServiceProviderFactory());
// Register your own things directly with Autofac here. Don't
// call builder.Populate(), that happens in AutofacServiceProviderFactory
// for you.
builder.Host.ConfigureContainer<ContainerBuilder>(builder => builder.RegisterModule(new MyApplicationModule()));
var app = builder.Build();
Any existing ASP.NET Core middleware can be configured on the WebApplication:
var app = WebApplication.Create(args);
// Setup the file server to serve static files
app.UseFileServer();
app.Run();
The WebApplication has a the developer exception enabled by default when the environment is development:
var app = WebApplication.Create(args);
app.MapGet("/", () => throw new InvalidOperationException("Oops, the '/' route has thrown an exception."));
app.Run();
Navigating to /
will render a friendly page that shows the exception.
Middleware | Description | API |
---|---|---|
Authentication | Provides authentication support. | app.UseAuthentication() |
Authorization | Provides authorization support. | app.UseAuthorization() |
CORS | Configures Cross-Origin Resource Sharing. | app.UseCors() |
Exception Handler | Globally handles exceptions thrown by the middleware pipeline. | app.UseExceptionHandler() |
Forwarded Headers | Forwards proxied headers onto the current request. | app.UseForwardedHeaders() |
HTTPS Redirection | Redirect all HTTP requests to HTTPS. | app.UseHttpsRedirection() |
HTTP Strict Transport Security (HSTS) | Security enhancement middleware that adds a special response header. | app.UseHsts() |
Request Logging | Provides support for logging HTTP requests and responses. | app.UseHttpLogging() |
W3C Request Logging | Provides support for logging HTTP requests and responses in the W3C format. | app.UseW3CLogging() |
Response Caching | Provides support for caching responses. | app.UseResponseCaching() |
Response Compression | Provides support for compressing responses. | app.UseResponseCompression() |
Session | Provides support for managing user sessions. | app.UseSession() |
Static Files | Provides support for serving static files and directory browsing. | app.UseStaticFiles() , app.UseFileServer() |
WebSockets | Enables the WebSockets protocol. | app.UseWebSockets() |
You can route to handlers using the various Map* methods on WebApplication
. There's a Map{HTTPMethod}
method to allow handling different HTTP methods:
app.MapGet("/", () => "This is a GET");
app.MapPost("/", () => "This is a POST");
app.MapPut("/", () => "This is a PUT");
app.MapDelete("/", () => "This is a DELETE");
Other HTTP methods:
app.MapMethods("/options-or-head", new [] { "OPTIONS", "HEAD" }, () => "This is an options or head request ");
Route handlers are methods that execute when the a route matches. Route handlers can be a function or any shape (including synchronous or asynchronous). It can be a lambda expression, a local function, an instance method or a static method.
Lambda expression
app.MapGet("/", () => "This is an inline lambda");
var handler = () => "This is a lambda variable";
app.MapGet("/", handler);
Local function
string LocalFunction() => "This is local function"
app.MapGet("/", LocalFunction);
Instance method
var handler = new HelloHandler();
app.MapGet("/", handler.Hello);
class HelloHandler
{
public string Hello()
{
return "Hello World";
}
}
Static method
app.MapGet("/", HelloHandler.Hello);
class HelloHandler
{
public static string Hello()
{
return "Hello World";
}
}
This provides the appropriate flexiblity when deciding how to organize your route handlers.
Routes can be given names in order to generate URLs to them. This avoids having to hard code paths in your application.
app.MapGet("/hello", () => "Hello there")
.WithName("hi");
app.MapGet("/", (LinkGenerator linker) => $"The link to the hello route is {linker.GetPathByName("hi", values: null)}");
Route names are inferred from method names if specified:
string Hi() => "Hello there";
app.MapGet("/hello", Hi);
app.MapGet("/", (LinkGenerator linker) => $"The link to the hello route is {linker.GetPathByName("Hi", values: null)}");
NOTE: Route names are case sensitive!
These names must be globally unique and are also used as the OpenAPI operation id when OpenAPI support is enabled (see the OpenAPI/Swagger section for more details).
You can capture route parameters as part of the route pattern definition:
app.MapGet("/users/{userId}/books/{bookId}", (int userId, int bookId) => $"The user id is {userId} and book id is {bookId}");
The route handler can declare the parameters that it wants to capture, and when a request is made to this route, the parameters will be parsed and passed to the handler. This makes it easy to capture the values in a type safe way (above, you can be sure that the userId
and bookId
are both int
).
If the route values are not valid int
s then an exception will be thrown. The following request will result in the exception below:
GET /users/hello/books/3
Microsoft.AspNetCore.Http.BadHttpRequestException: Failed to bind parameter "int userId" from "hello".
at Microsoft.AspNetCore.Http.RequestDelegateFactory.Log.ParameterBindingFailed(HttpContext httpContext, String parameterTypeName, String parameterName, String sourceValue, Boolean shouldThrow)
at lambda_method1(Closure , Object , HttpContext )
at Microsoft.AspNetCore.Http.RequestDelegateFactory.<>c__DisplayClass37_0.<Create>b__0(HttpContext httpContext)
app.MapGet("/posts/{*rest}", (string rest) => $"Routing to {rest}");
Route constraints are influence the matching behavior of a route.
app.MapGet("/todos/{id:int}", (int id) => db.Todos.Find(id));
app.MapGet("/todos/{text}", (string text) => db.Todos.Where(t => t.Text.Contains(text));
app.MapGet("/posts/{slug:regex(^[a-z0-9_-]+$)}", (string slug) => $"Post {slug}");
Path | Match |
---|---|
/todos/1 |
/todos/{id:int} |
/todos/something |
/todos/{text} |
/posts/mypost |
/posts/{slug:regex(^[a-z0-9_-]+$)} |
/posts/% |
No match |
constraint | Example | Example Matches | Notes |
---|---|---|---|
int |
{id:int} |
123456789 , -123456789 |
Matches any integer |
bool |
{active:bool} |
true , FALSE |
Matches true or false . Case-insensitive |
datetime |
{dob:datetime} |
2016-12-31 , 2016-12-31 7:32pm |
Matches a valid DateTime value in the invariant culture. See preceding warning. |
decimal |
{price:decimal} |
49.99 , -1,000.01 |
Matches a valid decimal value in the invariant culture. See preceding warning. |
double |
{weight:double} |
1.234 , -1,001.01e8 |
Matches a valid double value in the invariant culture. See preceding warning. |
float |
{weight:float} |
1.234 , -1,001.01e8 |
Matches a valid float value in the invariant culture. See preceding warning. |
guid |
{id:guid} |
CD2C1638-1638-72D5-1638-DEADBEEF1638 |
Matches a valid Guid value |
long |
{ticks:long} |
123456789 , -123456789 |
Matches a valid long value |
minlength(value) |
{username:minlength(4)} |
Rick |
String must be at least 4 characters |
maxlength(value) |
{filename:maxlength(8)} |
MyFile |
String must be no more than 8 characters |
length(length) |
{filename:length(12)} |
somefile.txt |
String must be exactly 12 characters long |
length(min,max) |
{filename:length(8,16)} |
somefile.txt |
String must be at least 8 and no more than 16 characters long |
min(value) |
{age:min(18)} |
19 |
Integer value must be at least 18 |
max(value) |
{age:max(120)} |
91 |
Integer value must be no more than 120 |
range(min,max) |
{age:range(18,120)} |
91 |
Integer value must be at least 18 but no more than 120 |
alpha |
{name:alpha} |
Rick |
String must consist of one or more alphabetical characters, a -z and case-insensitive. |
regex(expression) |
{ssn:regex(^\\d{{3}}-\\d{{2}}-\\d{{4}}$)} |
123-45-6789 |
String must match the regular expression. See tips about defining a regular expression. |
required |
{name:required} |
Rick |
Used to enforce that a non-parameter value is present during URL generation |
Parameter binding is the process of turning request data into strongly typed parameters that are expressed by route handlers. A binding source determines where parameters are bound from. Binding sources can be explict or inferred based HTTP method and parameter type.
Supported binding sources:
- Route values
- Query string
- Header
- Body (as JSON)
- Services provided by dependency injection
- Custom
NOTE: Binding from forms are not natively supported in this release.
The HTTP methods GET, HEAD, OPTIONS, DELETE will never bind from body. All other binding sources are supported.
NOTE: If you need to support the case where you have a GET with a body, you can directly read it from the HttpRequest.
var builder = WebApplication.CreateBuilder(args);
// Added as service
builder.AddSingleton<Service>();
var app = builder.Build();
app.MapGet("/{id}", (int id, int page, Service service) => { });
class Service { }
Parameter | Binding Source |
---|---|
id | route value |
page | query string |
service | provided by dependency injection |
var builder = WebApplication.CreateBuilder(args);
// Added as service
builder.AddSingleton<Service>();
app.MapPost("/", (Person person, Service service) => { });
class Service { }
record Person(string Name, int Age);
Parameter | Binding Source |
---|---|
person | body (as JSON) |
service | provided by dependency injection |
Attributes can be used to explicitly declare where parameters should be bound from.
using Microsoft.AspNetCore.Mvc;
app.MapGet("/{id}", ([FromRoute] int id,
[FromQuery(Name = "p")] int page,
[FromServices] Service service,
[FromHeader(Name = "Content-Type")] string contentType) => { });
Parameter | Binding Source |
---|---|
id | route value with the name id |
page | query string with the name "p" |
service | provided by dependency injection |
contentType | header with the name "Content-Type" |
Binding from form values is not supported at this time.
Parameters declared in route handlers will be treated as required. This means if a request matches the route, the route handler will only execute if all required paramters are provided in the request. Failure to do so will result in an error.
app.MapGet("/products", (int pageNumber) => $"Requesting page {pageNumber}");
Since the pageNumber
paramter is required, this route handler won't execute if the query string pageNumber
isn't provided. To make it optional define the type as nullable.
app.MapGet("/products", (int? pageNumber) => $"Requesting page {pageNumber ?? 1}");
This also works with methods that have a default value:
string ListProducts(int pageNumber = 1) => $"Requesting page {pageNumber}";
app.MapGet("/products", ListProducts);
The above will default to 1 if the pageNumber isn't specified in the query string.
This logic applies to all sources.
app.MapPost("/products", (Product? product) => () => { });
The above will call the method with a null product if no request body was sent.
NOTE: If invalid data is provided and the parameter is nullable, the route handler will not be executed.
app.MapGet("/products", (int? pageNumber) => $"Requesting page {pageNumber ?? 1}");
The following request will result in a 400 (see the Binding Failures section below for more details)
GET /products?pageNumber=two
There are some special types that the framework supports binding without any explicit attributes:
HttpContext
- The context which holds all the information about the current http request/response.HttpRequest
- The http requestHttpResponse
- The http reponseCancellationToken
- The cancellation token associated with the current http request.ClaimsPrincipal
- The user associated with the request (HttpContext.User
).
HttpContext
var builder = WebApplication.CreateBuilder(args);
app.MapGet("/", (HttpContext context) => context.Response.WriteAsync("Hello World"));
app.Run();
HttpRequest/HttpResponse
var builder = WebApplication.CreateBuilder(args);
app.MapGet("/", (HttpRequest request, HttpResponse response) => response.WriteAsync($"Hello World {request.Query["name"]}"));
app.Run();
CancellationToken
var builder = WebApplication.CreateBuilder(args);
app.MapGet("/", async (CancellationToken cancellationToken) =>
{
await MakeLongRunningRequestAsync(cancellationToken)
});
app.Run();
ClaimsPrincipal
var builder = WebApplication.CreateBuilder(args);
app.MapGet("/", (ClaimsPrincipal user) => user.Identity.Name);
app.Run();
There are 2 ways to customize parameter binding:
- For route, query, and header binding sources, you may bind custom types by adding a static
TryParse
method to your type. - You can completely take over the binding process by implementing a
BindAsync
method on your type.
TryParse
The TryParse method must be of the form(s):
public static bool TryParse(string value, T out result);
public static bool TryParse(string value, IFormatProvider provider, T out result);
Example
app.MapGet("/map", (Point point) => $"Point: {point.X}, {point.Y}");
public class Point
{
public double X { get; set; }
public double Y { get; set; }
public static bool TryParse(string? value, IFormatProvider? provider, out Point? point)
{
// Format is "(12.3,10.1)"
var trimmedValue = value?.TrimStart('(').TrimEnd(')');
var segments = trimmedValue?.Split(',', StringSplitOptions.RemoveEmptyEntries | StringSplitOptions.TrimEntries);
if (segments?.Length == 2
&& double.TryParse(segments[0], out var x)
&& double.TryParse(segments[1], out var y))
{
point = new Point { X = x, Y = y };
return true;
}
point = null;
return false;
}
}
A request to /map?point=(12.3,10.1)
returns:
Point: 12.3,10.1
BindAsync
The BindAsync
method must be of the form:
public static ValueTask<T?> BindAsync(HttpContext context, ParameterInfo parameter);
Example
app.MapGet("/products", (PagingData pageData) => $"SortBy:{pageData.SortBy}, SortDirection:{pageData.SortDirection}, CurrentPage:{pageData.CurrentPage}");
public class PagingData
{
public string? SortBy { get; init; }
public SortDirection SortDirection { get; init; }
public int CurrentPage { get; init; } = 1;
public static ValueTask<PagingData?> BindAsync(HttpContext context, ParameterInfo parameter)
{
const string sortByKey = "sortBy";
const string sortDirectionKey = "sortDir";
const string currentPageKey = "page";
Enum.TryParse<SortDirection>(context.Request.Query[sortDirectionKey], ignoreCase: true, out var sortDirection);
int.TryParse(context.Request.Query[currentPageKey], out var page);
page = page == 0 ? 1 : page;
var result = new PagingData
{
SortBy = context.Request.Query[sortByKey],
SortDirection = sortDirection,
CurrentPage = page
};
return ValueTask.FromResult<PagingData?>(result);
}
}
public enum SortDirection
{
Default,
Asc,
Desc
}
When binding fails, the framework will log a debug message and it will return various status codes to the client depending on the failure mode.
Failure mode | Nullable Parameter Type | Binding Source | Status code |
---|---|---|---|
{ParameterType}.TryParse returns false |
yes | route/query/header | 400 |
{ParameterType}.BindAsync returns null |
yes | custom | 400 |
{ParameterType}.BindAsync throws |
does not matter | custom | 500 |
Failure to read JSON body | does not matter | body | 400 |
Wrong content type (not application/json) | does not matter | body | 415 |
The rules for determining a binding source from a parameter are as follows:
- Explicit attribute defined on parameter (From* attributes) in the following order:
- Route values (
FromRoute
) - Query string (
FromQuery
) - Header (
FromHeader
) - Body (
FromBody
) - Service (
FromServices
)
- Route values (
- Special types
HttpContext
HttpRequest
HttpResponse
ClaimsPrincipal
CancellationToken
- Parameter type has a valid
BindAsync
method. - Parameter type is a string or has a valid
TryParse
method.- If the parameter name exists in the route template e.g.
app.Map("/todo/{id}", (int id) => {});
, then it will be bound from the route. - It will be bound from the query string.
- If the parameter name exists in the route template e.g.
- If the parameter type is a service provided by dependency injection, it will use that as the source.
- The parameter is from the body.
The body binding source uses System.Text.Json for de-serialization. It is NOT possible to change this default but you can customize the binding using other techniques described in above sections. To customize JSON serializer options, you can use the following:
using Microsoft.AspNetCore.Http.Json;
var builder = WebApplication.CreateBuilder(args);
// Configure JSON options
builder.Services.Configure<JsonOptions>(options =>
{
options.SerializerOptions.IncludeFields = true;
});
var app = builder.Build();
app.MapPost("/products", (Product product) => product);
app.Run();
class Product
{
// These are public fields instead of properties
public int Id;
public string Name;
}
This configures both the input and output default JSON options.
Route handlers support 2 types of return values:
IResult
based - This includesTask<IResult>
andValueTask<IResult>
string
- This includesTask<string>
andValueTask<string>
T
(Any other type) - This includesTask<T>
andValueTask<T>
Return value | Behavior | Content-Type |
---|---|---|
IResult |
The framework calls IResult.ExecuteAsync |
Decided by the IResult implementation |
string |
The framework writes the string directly to the response | text/plain |
T (Any other type) |
The framework will JSON serialize the response | application/json |
Example: string return values
app.MapGet("/hello", () => "Hello World");
Example: JSON return values
app.MapGet("/hello", () => new { Message = "Hello World" });
Example: IResult return values
app.MapGet("/hello", () => Results.Ok(new { Message = "Hello World" }));
The following example uses the built-in result types to customize the response:
app.MapGet("/todos/{id}", (int id, TodoDb db) =>
db.Todos.Find(id) is Todo todo
? Results.Ok(todo)
: Results.NotFound()
);
app.MapGet("/hello", () => Results.Json(new { Message = "Hello World" }));
app.MapGet("/405", () => Results.StatusCode(405));
app.MapGet("/text", () => Results.Text("This is some text"));
var proxyClient = new HttpClient();
app.MapGet("/pokemon", async () =>
{
var stream = await proxyClient.GetStreamAsync("http://myurl/pokedex.json")
// Proxy the response as JSON
return Results.Stream(stream, "application/json");
});
app.MapGet("/old-path", () => Results.Redirect("/new-path"));
app.MapGet("/download", () => Results.File("foo.text"));
Common result helpers exist on the Microsoft.AspNetCore.Http.Results
static class.
Description | Response type | Status Code | API |
---|---|---|---|
Write a JSON response with advanced options | application/json | 200 | Results.Json |
Write a JSON response | application/json | 200 | Results.Ok |
Write a text response | text/plain (default), configurable | 200 | Results.Text |
Write the response as bytes | application/octet-stream (default), configurable | 200 | Results.Bytes |
Write a stream of bytes to the response | application/octet-stream (default), configurable | 200 | Results.Stream |
Stream a file to the response for download with the content-disposition header | application/octet-stream (default), configurable | 200 | Results.File |
Set the status code to 404, with an optional JSON response | N/A | 404 | Results.NotFound |
Set the status code to 204 | N/A | 204 | Results.NoContent |
Set the status code to 422, with an optional JSON response | N/A | 422 | Results.UnprocessableEntity |
Set the status code to 400, with an optional JSON response | N/A | 400 | Results.BadRequest |
Set the status code to 409, with an optional JSON response | N/A | 409 | Results.Conflict |
Write a problem details JSON object to the response | N/A | 500 (default), configurable | Results.Problem |
Write a problem details JSON object to the response with validation errors | N/A | N/A, configurable | Results.ValidationProblem |
Users can take control of responses by implementing a custom IResult
type. Here's an example of an HTML result type:
namespace Microsoft.AspNetCore.Http;
static class ResultsExtensions
{
public static IResult Html(this IResultExtensions resultExtensions, string html)
{
ArgumentNullException.ThrowIfNull(resultExtensions, nameof(resultExtensions));
return new HtmlResult(html);
}
}
class HtmlResult : IResult
{
private readonly string _html;
public HtmlResult(string html)
{
_html = html;
}
public Task ExecuteAsync(HttpContext httpContext)
{
httpContext.Response.ContentType = MediaTypeNames.Text.Html;
httpContext.Response.ContentLength = Encoding.UTF8.GetByteCount(_html);
return httpContext.Response.WriteAsync(_html);
}
}
We recommend adding an extension method to Microsoft.AspNetCore.Http.IResultExtensions
to make these custom results more discoverable.
app.MapGet("/html", () => Results.Extensions.Html(@$"<!doctype html>
<html>
<head><title>miniHTML</title></head>
<body>
<h1>Hello World</h1>
<p>The time on the server is {DateTime.Now:O}</p>
</body>
</html>"));
Routes can be protected using authorization policies. These can be declared via the Authorize
attribute or by using the RequireAuthorization
method.
var builder = WebApplication.CreateBuilder(args);
builder.Services.AddAuthorization(o => o.AddPolicy("AdminsOnly", b => b.RequireClaim("admin", "true"));
var app = builder.Build();
app.UseAuthorization();
app.MapGet("/auth", [Authorize] () => "This endpoint requires authorization");
OR
app.MapGet("/auth", () => "This endpoint requires authorization")
.RequireAuthorization();
Authorization policies can be configured as well:
app.MapGet("/admin", [Authorize("AdminsOnly")] () => "This endpoint is for admins only");
OR
app.MapGet("/admin", () => "This endpoint is for admins only")
.RequireAuthorization("AdminsOnly");
It's also possible to allow any unauthenticated users to endpoints by using the AllowAnonymous
attribute or
the AllowAnonymous
method.
app.MapGet("/login", [AllowAnonymous] () => "This endpoint is for admins only");
app.MapGet("/login", () => "This endpoint is for admins only")
.AllowAnonymous();
Routes can be CORS enabled using CORS policies. These can be declared via the EnableCors
attribute or by using the
RequireCors
method.
var builder = WebApplication.CreateBuilder(args);
builder.Services.AddCors(options => options.AddPolicy("AnyOrigin", o => o.AllowAnyOrigin()));
var app = builder.Build();
app.UseCors();
app.MapGet("/cors", [EnableCors("AnyOrigin")] () => "This endpoint allows cross origin requests!");
OR
app.MapGet("/cors", () => "This endpoint allows cross origin requests!")
.RequireCors("AnyOrigin");
It's possible to describe the OpenAPI specification for route handlers using Swashbuckle.
Below is an example of a typical ASP.NET Core application with OpenAPI suppport:
var builder = WebApplication.CreateBuilder(args);
builder.Services.AddEndpointsApiExplorer();
builder.Services.AddSwaggerGen(c =>
{
c.SwaggerDoc("v1", new() { Title = builder.Environment.ApplicationName, Version = "v1" });
});
var app = builder.Build();
if (app.Environment.IsDevelopment())
{
app.UseSwagger();
app.UseSwaggerUI(c => c.SwaggerEndpoint("/swagger/v1/swagger.json", $"{builder.Environment.ApplicationName} v1"));
}
app.MapGet("/api/products", (int id, ProductDb db) => db.Products.Find(id) is Product product ? Results.Ok(product) : Results.NotFound())
.Produces<Product>(200)
.Produces(404);
app.MapGet("/skipme", () => { })
.ExcludeFromDescription();
app.MapGet("/api/products", (ProductDb db) => db.Products.ToListAsync())
.WithName("GetProducts");
app.MapGet("/api/products", (ProductDb db) => db.Products.ToListAsync())
.WithTags("ProductsGroup");
app.MapGet("/upload", async (HttpRequest req) =>
{
if (!req.HasFormContentType)
{
return Results.BadRequest();
}
var form = await req.ReadFormAsync();
var file = form.Files["file"];
if (file is null)
{
return Results.BadRequest();
}
var uploads = Path.Combine(uploadsPath, file.FileName);
await using var fileStream = File.OpenWrite(uploads);
await using var uploadStream = file.OpenReadStream();
await uploadStream.CopyToAsync(fileStream);
return Results.NoContent();
})
.Accepts<IFormFile>("multipart/form-data");
The existing .NET ecosystem has built extensibility around IServiceCollection
, IHostBuilder
and IWebHostBuilder
. These properties are available on the WebApplicationBuilder
as Services
, Host
and WebHost
.
The WebApplication
implements both Microsoft.AspNetCore.Builder.IApplicationBuilder
and Microsoft.AspNetCore.Routing.IEndpointRouteBuilder
.
We expect library authors to continue targeting IHostBuilder
, IWebHostBuilder
, IApplicationBuilder
and IEndpointRouteBuilder
when building ASP.NET Core specific components. This will ensure that your middleware, route handler, or other extensibility points continue to work across different hosting models.
- No support for filters. i.e.
IAsyncAuthorizationFilter
,IAsyncActionFilter
,IAsyncExceptionFilter
,IAsyncResultFilter
,IAsyncResourceFilter
- No support for model binding. i.e.
IModelBinderProvider
,IModelBinder
. Support can be added with a custom binding shim.- No support for binding from forms. This includes binding
IFormFile
(this will be added in the future).
- No support for binding from forms. This includes binding
- No built-in support for validation. i.e.
IModelValidator
- No support for application parts or the application model. There's no way to apply or build your own conventions.
- No built-in view rendering support. We recommend using Razor Pages for rendering views.
- No support for JsonPatch
- No support for OData
- No support for ApiVersioning, see this issue for more details.
Not sure what that code is supposed to be doing.