Setup avahi-daemon on Ubuntu for so you can reach hostname `ubuntu.local` from host OS

setup-avahi.sh

sudo apt-get install avahi-daemon avahi-discover avahi-utils libnss-mdns mdns-scan

Also chiming in here, sudo apt install -y avahi-daemon was all that was needed on Ubuntu 20.04 on (AMD/ARM)64.
Now Raspberry Pi 3 + 4 devices, desktops and servers on the network can be contacted via hostname.local addresses ♥️

+1... works on my Pi4 as well

how do i add domain names in avaho conf file or in XDG config file?please help me here

omg finally thanks 😊

Thanks also to the commenters, especially @ryanmaclean!

If you only wish your host to be discoverable via hostname.loacl , then avahi-daemon is sufficient.
Once you want to resolve other client on local network using xxxx.local the rest of packages are still needed.

I'm not sure what's wrong on my Ubuntu system. avahi-browse -a shows my five local mDNS devices on the network by their host names. However, if I try avahi-resolve-host-name on any one of them it gives me a "Timeout reached". I'm unable to ping any of them. I've installed everything described in this thread, and I've tried the various settings. The behavior remains unchanged. Any thoughts what I may be missing?

Once you want to resolve other client on local network using xxxx.local the rest of packages are still needed.

I don't think I've ever installed the rest of those packages, avahi-daemon alone has always let me ping and talk to other machines via their .local address. Just now on 20.10-server, even.

Once you want to resolve other client on local network using xxxx.local the rest of packages are still needed.

I don't think I've ever installed the rest of those packages, avahi-daemon alone has always let me ping and talk to other machines via their .local address. Just now on 20.10-server, even.

I wish mine worked as well in either case. Unfortunately, it doesn't.

Hello All,
For Home automation project I used Esp8266 module,i configured it as SoftAcess point(It serves as router) and I connected things to it.
To acess it,I type IpAddress of it,it works fine.I need to acess it,When I type esp.local in url.When Iam trying these It didn't responding in ubuntu.But works fine in windows when i installed Bonjour.It didn't works in ubuntu.Please help

I installed avahi by following steps

1.sudo apt-get install avahi-daemon avahi-discover avahi-utils libnss-mdns mdns-scan
2.sudo gedit sudo systemctl restart avahi-daemon
then I changed AVAHI_DAEMON_DETECT_LOCAL=1 to 0
Neither worked whe it is 0 nor 1.
3.I even tried sudo systemctl restart avahi-daemon

This is the code written in ArduinoIde

#ifdef ESP8266
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#elif defined(ESP32)
#include <WiFi.h>
#include <ESPmDNS.h>
#else
#error "Board not found"
#endif

#include <ESPAsyncWebServer.h>

AsyncWebServer server(80); // server port 80

void notFound(AsyncWebServerRequest *request)
{
request->send(404, "text/plain", "Page Not found");
}

void setup(void)
{

Serial.begin(115200);

WiFi.softAP("techiesms", "");
Serial.println("softap");
Serial.println("");
Serial.println(WiFi.softAPIP());

if (MDNS.begin("ESP")) { //esp.local/
Serial.println("MDNS responder started");
}

server.on("/", [](AsyncWebServerRequest * request)
{
String message = "hello world";
request->send(200, "text/plain", message);
});

server.on("/page1", HTTP_GET, [](AsyncWebServerRequest * request)
{
String message = "Welcome to page1";
request->send(200, "text/plain", message);
});

server.onNotFound(notFound);

server.begin(); // it will start webserver
}

void loop(void)
{
}****

Glad I stumbled on this. avahi-daemon alone worked for me on Ubuntu Server 20.04.3 LTS. I could even log in to Virtualmin/Webmin's control panel using the hostname after adding a rule for the mdns service in firewalld.

Thank you.

I'm not sure what's wrong on my Ubuntu system. avahi-browse -a shows my five local mDNS devices on the network by their host names. However, if I try avahi-resolve-host-name on any one of them it gives me a "Timeout reached". I'm unable to ping any of them. I've installed everything described in this thread, and I've tried the various settings. The behavior remains unchanged. Any thoughts what I may be missing?

Try the hostname without the ".local". I have an Octopi server (its a 3D printer appliance) on a Raspberry Pi and sometimes octopi.local works and sometimes just octopi. Not sure why. Then I just recently installed Avahi on a virtual machine and no matter what I did hostname.local didn't work. Then I tried hostname by itself without a .local and viola! SSH and web browser can both reach it that way.

May I suggest the following as an all-in-one? sudo apt update && sudo apt-get install avahi-daemon avahi-discover avahi-utils libnss-mdns mdns-scan && sudo apt upgrade. Once that looks good, sudo reboot. That got me going on my new Ubuntu install on the TuringPi RK-1 modules.

I looked them up to know what each one does.
avahi-daemon is the core service on your device that makes it publish itself via mDNS. This is the only thing you need to make your device respond to {hostname}.local. It seems like it can also advertise other services on the network through mDNS though, but I'm not sure.

avahi-discover is a GUI app to show other services published through mDNS. I didn't need it.
mdns-scan is a CLI that also scans for mDNS services on the local network. Useful for troubleshooting, but I also didn't need it.
avahi-utils is a collection of CLI tools that could be useful, but I didn't need them for my server. It includes things like avahi-browse which is similar to the above two tools.

libnss-mdns is useful for client devices that want to access services published via mDNS. So if you want your device to reach other .local services, you need this installed.