Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save dcava/60fc2b40e9b6b68fbf2a5ca4d65f2c40 to your computer and use it in GitHub Desktop.
Save dcava/60fc2b40e9b6b68fbf2a5ca4d65f2c40 to your computer and use it in GitHub Desktop.
Update to superjamie's jessie vpn guide [ https://gist.github.com/superjamie/ac55b6d2c080582a3e64 ]

set up root and replace default user

pi@raspberrypi:~# sudo su
root@raspberrypi:/home/pi# passwd
root@raspberrypi:/home/pi# reboot

log in as root and set up new user

root@raspberrypi:~# useradd -d /home/user user
root@raspberrypi:~# passwd user

delete default account

root@raspberrypi:~# deluser pi
root@raspberrypi:~# rm -rf /home/pi

Configure raspbian

root@raspberrypi:~# dpkg-reconfigure tzdata
root@raspberrypi:~# dpkg-reconfigure locales

Set Hostname (I called mine vpn)

root@raspberrypi:~# nano /etc/hosts
root@raspberrypi:~# nano /etc/hostname

Set keyboard layout

root@raspberrypi:~# nano /etc/default/keyboard
XKBLAYOUT="us"

UPDATE to stretch

root@raspberrypi:~# sed -i 's/jessie/stretch/g' /etc/apt/sources.list
root@raspberrypi:~# apt-get update
root@raspberrypi:~# apt-get dist-upgrade

Remove references to eth0 in interfaces

root@raspberrypi:~# nano /etc/network/interfaces

(Comment or delete everything below iface lo inet loopback)

# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

Install network-manager and openvpn

root@raspberrypi:~# aptitude install network-manager network-manager-openvpn openvpn

Allow network-manager ifupdown management

root@raspberrypi:~# nano /etc/NetworkManager/NetworkManager.conf

(you want managed=true)

[main]
plugins=ifupdown,keyfile

[ifupdown]
managed=true

reboot

root@raspberrypi:~# reboot

Set up lan

root@vpn:~# nmcli c add con-name eth0 ifname eth0 type ethernet ip4 192.168.1.5/24 gw4 192.168.1.1
root@vpn:~# nmcli c mod eth0 ipv4.dns "8.8.8.8 8.8.4.4"
root@vpn:~# nmcli c up eth0
root@vpn:~# nmcli c 
NAME                UUID                                  TYPE            DEVICE 
eth0                a8864abf-5cbf-4a9e-94be-ba67f39e5d88  802-3-ethernet  eth0   
Wired connection 1  8107e4e8-a1aa-368a-ac8d-6de3edfdfaa6  802-3-ethernet  --     
root@vpn:~# nmcli c del 8107e4e8-a1aa-368a-ac8d-6de3edfdfaa6
root@vpn:~# reboot

import pia scripts

root@vpn:~# aptitude install unzip
root@vpn:~# cd /etc/openvpn
root@vpn:/etc/openvpn# wget https://privateinternetaccess.com/openvpn/openvpn-strong-tcp.zip
root@vpn:/etc/openvpn# unzip openvpn-strong-tcp.zip
root@vpn:/etc/openvpn# rm openvpn-strong-tcp.zip

copy files to edit

(in case you make a mistake, this also makes the nmcli commands easier)

root@vpn:/etc/openvpn# cp /etc/openvpn/AU\ Sydney.ovpn /etc/openvpn/sydney.ovpn
root@vpn:/etc/openvpn# cp /etc/openvpn/Hong\ Kong.ovpn /etc/openvpn/hongkong.ovpn

import into network manager

root@vpn:/etc/openvpn# nmcli c import type openvpn file /etc/openvpn/sydney.ovpn
root@vpn:/etc/openvpn# nmcli c import type openvpn file /etc/openvpn/hongkong.ovpn

add your username and password to the files you imported

root@vpn:/etc/openvpn# nano /etc/NetworkManager/system-connections/sydney
root@vpn:/etc/openvpn# nano /etc/NetworkManager/system-connections/hongkong

set password flag, then add password and user details

password-flags=0
proto-tcp=yes
remote=aus.privateinternetaccess.com:501
remote-cert-tls=server
reneg-seconds=0
username=%username%
service-type=org.freedesktop.NetworkManager.openvpn

[vpn-secrets]
password=%password%

reboot

root@vpn:/etc/openvpn# reboot

Check connections

root@vpn:~# nmcli c
NAME      UUID                                  TYPE            DEVICE 
eth0      a8864abf-5cbf-4a9e-94be-ba67f39e5d88  802-3-ethernet  eth0   
hongkong  fc7eea3b-5041-4a6d-acc1-0d45664da82f  vpn             --     
sydney    7fb33267-665a-4f31-9466-0c94d33d8a86  vpn             --     

set up ip forwarding

root@vpn:~# echo -e '\n#Enable IP Routing\nnet.ipv4.ip_forward = 1' | tee -a /etc/sysctl.conf
root@vpn:~# sysctl -p
root@vpn:~# iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
root@vpn:~# iptables -A FORWARD -i tun0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT
root@vpn:~# iptables -A FORWARD -i eth0 -o tun0 -j ACCEPT
root@vpn:~# aptitude install iptables-persistent
root@vpn:~# netfilter-persistent save
root@vpn:~# systemctl enable netfilter-persistent

add autoconnect script

root@vpn:~# nano /opt/vpn-auto-sydney.sh
#!/bin/bash +x

# Source: http://www.gabsoftware.com/tips/automatically-reconnect-to-your-vpn-on-linux/

# Description:
# Make the script executable "chmod +x /path/to/the/script.sh
# Put the script in .profile or .bashrc so it can be run on user login:
# Example: echo "/path/to/the/script.sh start &" >> .bashrc
# The script can be bound to shortcut keys with these commands:
#   /path/to/the/script.sh start # starts and monitors VPN connection
#   /path/to/the/script.sh stop  # stops the monitor and also the VPN connection

##########
# Config #
##########

# You can see those with "nmcli con" command
VPN_NAME="sydney"
VPN_UID="7fb33267-665a-4f31-9466-0c94d33d8a86"

# Delay in secconds
DELAY=30

# File path with write permission to the executing user to store script status information
LOG="/var/log/vpn-sydney.log"

# Enable/disable ping connection check
PING_CHECK_ENABLED=true

# Check IP/Hostname
CHECK_HOST="8.8.8.8"

# Configure DISPLAY variable for desktop notifications
#DISPLAY=0.0

##################
# Implementation #
##################

if [[ $1 == "stop" ]]; then
  nmcli con down uuid $VPN_UID

  echo "VPN monitoring service STOPPED!"
  echo "$(date +%Y/%m/%d\ %H:%M:%S) -> VPN monitoring service STOPPED!" >> $LOG
  #notify-send "VPN monitoring service STOPPED!"
  
  SCRIPT_FILE_NAME=`basename $0`
  PID=`pgrep -f $SCRIPT_FILE_NAME`
  kill $PID  
elif [[ $1 == "start" ]]; then
  while [ "true" ]
  do
    VPNCON=$(nmcli con show --active | grep "$VPN_NAME" | cut -f1 -d " ")
    if [[ $VPNCON != $VPN_NAME ]]; then
      echo "$(date +%Y/%m/%d\ %H:%M:%S) -> Disconnected from $VPN_NAME, trying to reconnect..." >> $LOG
      (sleep 1s && nmcli con up uuid $VPN_UID)
    else
      echo "$(date +%Y/%m/%d\ %H:%M:%S) -> Already connected to $VPN_NAME!" >> $LOG
    fi
    sleep $DELAY

    if [[ $PING_CHECK_ENABLED = true ]]; then
      PINGCON=$(ping $CHECK_HOST -c2 -q -W 3 |grep "2 received")
      if [[ $PINGCON != *2*received* ]]; then
        echo "$(date +%Y/%m/%d\ %H:%M:%S) -> Ping check timeout ($CHECK_HOST), trying to reconnect..." >> $LOG
        (nmcli con down uuid $VPN_UID)
        (sleep 1s && nmcli con up uuid $VPN_UID)
      else
        echo "$(date +%Y/%m/%d\ %H:%M:%S) -> Ping check ($CHECK_HOST) - OK!" >> $LOG
      fi
    fi
  done

  echo "VPN monitoring service STARTED!"
  echo "$(date +%Y/%m/%d\ %H:%M:%S) -> VPN monitoring service STARTED!" >> $LOG
  #notify-send "VPN monitoring service STARTED!"
else 
  echo "$(date +%Y/%m/%d\ %H:%M:%S) -> Unrecognised command: $0 $@" >> $LOG
  echo "Please use $0 [start|stop]" 
  #notify-send "UNRECOGNIZED COMMAND" "VPN monitoring service could not recognise the command!"
fi

add startup script

root@vpn:~# nano /etc/init.d/pia 
#! /bin/sh
# /etc/init.d/pia
#

# Some things that run always
touch /var/lock/pia

# Carry out specific functions when asked to by the system
case "$1" in
  start)
    echo "Starting script pia"
    /opt/vpn-auto-sydney.sh start
    ;;
  stop)
    echo "Stopping script pia"
    /opt/vpn-auto-sydney.sh stop
    ;;
  *)
    echo "Usage: /etc/init.d/pia {start|stop}"
    exit 1
    ;;
esac

exit 0

Enable Service

root@vpn:~# chmod 755 /opt/vpn-auto-sydney.sh
root@vpn:~# update-rc.d pia defaults
root@vpn:~# reboot

check that the VPN auto connects

(sydney and the tunnel interface have connected correctly below)

root@vpn:~# nmcli c
NAME      UUID                                  TYPE            DEVICE 
eth0      a8864abf-5cbf-4a9e-94be-ba67f39e5d88  802-3-ethernet  eth0   
sydney    7fb33267-665a-4f31-9466-0c94d33d8a86  vpn             eth0   
tun0      9fd7bf45-095f-4b12-94a2-5255729b226d  tun             tun0   
hongkong  fc7eea3b-5041-4a6d-acc1-0d45664da82f  vpn             --     

Configure Other Systems on the LAN

Now we're ready to tell other systems to send their traffic through the Raspberry Pi.

Configure other systems' network so they are like:

  • Default Gateway: Pi's static IP address (eg: 192.168.1.5)
  • DNS: Something public like Google DNS (8.8.8.8 and 8.8.4.4)

Don't use your existing internet router (eg: 192.168.1.1) as DNS, or your DNS queries will be visible to your ISP and hence may be visible to organizations who wish to see your internet traffic.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment