SpeedBoatRace cura config

speedboatrace.curaprofile

PK!D·3k~
~
!elegoo_neptune_3pro_speedboatrace[general]
version = 4
name = SpeedBoatRace
definition = elegoo_base

[metadata]
type = quality_changes
quality_type = fine
setting_version = 21

[values]
acceleration_enabled = False
adhesion_type = none
layer_height = 0.25
material_bed_temperature = 60.0
retraction_combing = off
speed_slowdown_layers = 1
support_enable = False
support_structure = tree
support_type = buildplate

PK!ªã §88+elegoo_neptune2_extruder_0_#2_speedboatrace[general]
version = 4
name = SpeedBoatRace
definition = elegoo_base

[metadata]
type = quality_changes
quality_type = fine
intent_category = default
position = 0
setting_version = 21

[values]
acceleration_print = 1500.0
bottom_layers = 3
bottom_thickness = =top_bottom_thickness
brim_width = 6
conical_overhang_angle = 60
cool_fan_full_layer = 1
cool_min_layer_time = 0
infill_angles = [135]
infill_line_width = 0.5
infill_offset_x = 1.0
infill_offset_y = 2.0
infill_pattern = lines
infill_sparse_density = 10
infill_sparse_thickness = 0.5
infill_wipe_dist = 0
line_width = 0.5
material_flow = 93.0
material_print_temperature = 230
material_print_temperature_layer_0 = 230
retraction_amount = 0.8
retraction_enable = False
retraction_prime_speed = 50
retraction_retract_speed = 50
retraction_speed = 50
roofing_layer_count = 0
skin_angles = [ 45]
skin_line_width = 0.5
skin_no_small_gaps_heuristic = True
skin_outline_count = 0
skin_overlap = 0
skin_preshrink = 0
speed_infill = 170
speed_layer_0 = 150
speed_print = 190
speed_support = 40.0
speed_topbottom = 200.0
speed_travel = 200
speed_travel_layer_0 = 200
speed_wall = 170.0
speed_wall_x = 170.0
support_angle = 65.0
top_bottom_pattern = zigzag
top_bottom_thickness = 0.6
top_layers = 3
wall_line_count = 2
wall_thickness = 1.2
z_seam_type = shortest
zig_zaggify_infill = False

PK
!D·3k~
~
!Ä
elegoo_neptune_3pro_speedboatracePK
!ªã §88+Ä
Ω
elegoo_neptune2_extruder_0_#2_speedboatracePK®>