STaging

docker-compose.yml

# Only schema version 2.3 supports the nvidia GPU runtime
# https://developer.nvidia.com/blog/gpu-containers-runtime/
version: '2.3'

volumes:
    config:
    edge-data:
    camera-data:
    vision-data:
    vision-saver-data:
    widthscan-data:
    defectscan-data:
    vision-anomaly-data:
    tfx:

services:
    edge:
        # change this line to match the image of the specific edge driver version that you need
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/edge:76d50380-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: edge
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
        volumes:
            - "config:/config"
            - "edge-data:/data"
        # restart: unless-stopped

    camera:
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/camera:a362692-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: camera
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
            MQTT:
            GRABBER: file
            CAMERA:
            FILES:
            ARV_DEBUG:
        volumes:
            - "config:/config"
            - "camera-data:/data"
            # create symlink for ~/run/anomalies to actual directory
            # on disk where the test files are located
            - type: bind
              source: ./anomalies
              target: /testdata
        # restart: unless-stopped

    vision:
        # change this line to match the image of the specific vision driver version that you need
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/vision:c78bd2a1-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: vision
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
        volumes:
            - "config:/config"
            - "vision-data:/data"
        # restart: unless-stopped

    # vision_saver:
    #     # change this line to match the image of the specific vision_saver driver version that you need
    #     image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/vision-saver:b1c96b33-amd64
    #     privileged: true
    #     network_mode: host
    #     environment:
    #         AWS_IOT_KEY: ${AWS_IOT_KEY}
    #         AWS_IOT_CERT: ${AWS_IOT_CERT}
    #         BALENA_SERVICE_NAME: vision_saver
    #         # change this line to match actual FBS
    #         BALENA_APP_NAME: FL_C1_PR_PR01
    #         # change this line to match actual FBS
    #         BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
    #         # comment next line, and uncomment following line, to save image files to local drive
    #         FILES:
    #         # FILES: "/imagedata"
    #     volumes:
    #         - "config:/config"
    #         - "vision-saver-data:/data"
    #         # uncomment next line to save image files to local drive
    #         # - "imagedata:/imagedata"
    #     # restart: unless-stopped

    widthscan:
        # change this line to match the image of the specific driver version that you need
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/vision-widthscan:faa20b4-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: widthscan
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
            WIDTHMETRIC: stripe_width_bottom
            PPM: 12.03091846
        volumes:
            - "config:/config"
            - "widthscan-data:/data"

    defectscan:
        # change this line to match the image of the specific driver version that you need
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/vision-defectscan:faa20b4-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: defectscan
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
        volumes:
            - "config:/config"
            - "defectscan-data:/data"
        
    vision_anomaly:
        # change this line to match the image of the specific vision_anomaly driver version that you need
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/mapper/vision-anomaly:7ca57a54-amd64
        privileged: true
        network_mode: host
        environment:
            AWS_IOT_KEY: ${AWS_IOT_KEY}
            AWS_IOT_CERT: ${AWS_IOT_CERT}
            BALENA_SERVICE_NAME: vision_saver
            # change this line to match actual FBS
            BALENA_APP_NAME: FL_C1_PR_PR01
            # change this line to match actual FBS
            BALENA_DEVICE_NAME_AT_INIT: FL_C1_PR_PR01_KEC05
            # comment next line, and uncomment following line, to save image files to local drive
            FILES:
            # FILES: "/imagedata"
        volumes:
            - "config:/config"
            - "vision-anomaly-data:/data"
        # restart: unless-stopped
        
    processor:
        image: 112243728910.dkr.ecr.eu-west-1.amazonaws.com/automation/firefly/vision/anomaly-inference:8cd8598-amd64
        network_mode: host

    tfx:
        image: tensorflow/serving:2.1.0-gpu
        # This is needed to run on GPU
        # https://developer.nvidia.com/blog/gpu-containers-runtime/
        runtime: nvidia
        network_mode: host
        volumes:
            # create symlink for ~/run/tfx to actual directory
            # on disk where the model is located
            - type: bind
              source: ./tfx
              target: /models
        environment:
            - MODEL_NAME=anomaly-detector
            - enable_batching=true