Test Bluetooth mesh

mesh-test.md

start clean mesh (first terminal):

$ rm -rf ~/.config/meshcfg/config_db.json
$ sudo rm -rf /var/lib/bluetooth/mesh
$ sudo mkdir /var/lib/bluetooth/mesh
$ sudo /usr/libexec/bluetooth/bluetooth-meshd -nd --debug

provisioner (second terminal):

$ mesh-cfgclient

Warning: config file "/home/pi/.config/meshcfg/config_db.json" not found
[mesh-cfgclient]# create
Created new node with token 522b02d50de1c8a2
Proxy added: org.bluez.mesh.Node1 (/org/bluez/mesh/nodea186fe8c7e3b461daa29664eba26ed2d)
Proxy added: org.bluez.mesh.Management1 (/org/bluez/mesh/nodea186fe8c7e3b461daa29664eba26ed2d)
Attached with path /org/bluez/mesh/nodea186fe8c7e3b461daa29664eba26ed2d
[mesh-cfgclient]# appkey-create 0 0

device (third terminal):

$ bluez/test/test-mesh

join
Joining with UUID 3df8492249f1476491a1e4e1d051a5f7
Join procedure started

provisioner:

[mesh-cfgclient]# provision 3df8492249f1476491a1e4e1d051a5f7

device:

PromptStatic ( static-oob )
Enter 16 octet key on remote device:  6f4b1f31cbe0d0f81b0ef64a1c70b86c

provisioner:

[[mesh-agent]# ] Enter key (hex number): 6f4b1f31cbe0d0f81b0ef64a1c70b86c

device:

Joined mesh network with token 62cb5d464413e5c7

provisioner:

Assign addresses for 2 elements
Provisioning done:
Mesh node:
	UUID = 3DF8492249F1476491A1E4E1D051A5F7
	primary = 00aa

	elements (2):

[mesh-cfgclient]# menu config
[mesh-cfgclient]# target 00aa
Configuring node 00aa

[config: Target = 00aa]# appkey-add 0

[config: Target = 00aa]# composition-get
Received DeviceCompositionStatus (len 29)
Received composion:
	Feature support:
		relay: yes
		proxy: no
		friend: yes
		lpn: no
	 Element 0:
		location: 0000
		SIG defined models:
		  Model ID	0000 "Configuration Server"
		  Model ID	1000 "Generic OnOff Server"
		 Vendor defined models:
		  Model ID	05f1 0001
	 Element 1:
		location: 0000
		SIG defined models:
		  Model ID	1001 "Generic OnOff Client"

[config: Target = 00aa]# bind 00aa 0 1000
[config: Target = 00aa]# bind 00ab 0 1001

device:

attach
Attach mesh node to bluetooth-meshd daemon
Mesh app registered: /org/bluez/mesh/node3df8492249f1476491a1e4e1d051a5f7
Update Model Config 1000
Bindings: [0]
Update Model Config 1001
Bindings: [0]

dest
Enter 4-digit hex destination address:
00aa
Destination address: 00aa
client-menu
*** ON/OFF CLIENT MENU ***
on
Set state: 1
OnOffClient send command
Message Received on Element 00, src= 00ab, dst=00aa
State is ON
Message Received on Element 01, src= 00aa, dst=00ab
OnOffClient process message len = 3
Got state ON from 00aa
off
Set state: 0
OnOffClient send command
Message Received on Element 00, src= 00ab, dst=00aa
State is OFF
Message Received on Element 01, src= 00aa, dst=00ab
OnOffClient process message len = 3
Got state OFF from 00aa
get-state
OnOffClient send command
Message Received on Element 00, src= 00ab, dst=00aa
Get state
Message Received on Element 01, src= 00aa, dst=00ab
OnOffClient process message len = 3
Got state OFF from 00aa

@Gerodote I agree, although I don't know where that documentation is (for bluez in general). If you have a pointer to it, please let me know

I guess somewhere there ( I can be wrong ):
https://github.com/bluez/bluez/tree/master/doc
https://github.com/bluez/bluez/tree/master/test

Non of those seems suitable to me. The first is the API spec and the other are tests. Maybe raise an issue with the community to see where examples like this could fit?

Non of those seems suitable to me. The first is the API spec and the other are tests. Maybe raise an issue with the community to see where examples like this could fit?

Good idea !

Thank you! Using this I was also able to turn my Sylvania A19 T-C-MD84F bulb on and off. I was having a lot of trouble provisioning them before, and ended up getting /data/user/0/com.ledvance.smartplus/files/Network_*.meshdata from my phone, so I can use the network that Sylvania's app already created. I used https://github.com/NickstaDB/SerializationDumper/releases/tag/1.13 to extract keys and the device address. Configuring the network to work with that was somewhat complicated. But then I simply started with the test-mesh join step here, and after following these instructions I could simply set the Sylvania bulb as the target and control it.