搬瓦工用到的一些SS配置命令

sudo apt-get update
sudo apt-get install git vim wget psmisc python-pip -y

wget --no-check-certificate https://github.com/shadowsocks/shadowsocks-rust/releases/download/v1.7.2/shadowsocks-v1.7.2-stable.x86_64-unknown-linux-musl.tar.xz

tar -Jxf shadowsocks-v1.7.2-stable.x86_64-unknown-linux-musl.tar.xz

cp ssserver /usr/local/bin/

cat <<EOF >/usr/lib/systemd/system/shadowsocks.service
[Unit]
Description=Shadowsocks Server
After=network.target

[Service]
ExecStart=/usr/local/bin/ssserver -c /etc/shadowsocks.json
Restart=on-abort

[Install]
WantedBy=multi-user.target
EOF

cat <<EOF >/etc/shadowsocks.json
{
        "servers": [
                {
                        "address": "服务器端IP地址",
                        "port": 服务器端监听端口号1,
                        "password": "连接密码",
                        "fast_open": true,
                        "method": "aes-256-cfb"
                },
                {
                        "address": "服务器端IP地址",
                        "port": 服务器端监听端口号2,
                        "password": "连接密码",
                        "fast_open": true,
                        "method": "aes-256-cfb"
                },
        ],
        "local_port": 1080,
        "local_address": "127.0.0.1"
}
EOF

systemctl enable shadowsocks
systemctl start shadowsocks
systemctl status shadowsocks

wget --no-check-certificate -O tcp.sh https://github.com/cx9208/Linux-NetSpeed/raw/master/tcp.sh && chmod +x tcp.sh
git clone https://github.com/tcp-nanqinlang/general.git bbr_plus
git clone https://github.com/675816156/shell-scripts.git

bash ./shell-scripts/kcptun/kcptun.sh

/etc/rc.local文件中添加：
/usr/bin/systemctl start crond.service
/usr/bin/systemctl start shadowsocks 

# 下面步骤忽略
iptables -I INPUT -p udp --dport 29900 -j ACCEPT
iptables -I INPUT -p tcp --dport 29900 -j ACCEPT
iptables-save >/etc/iptables

cat <<EOF >/etc/network/if-pre-up.d/iptables
#!/bin/sh
/sbin/iptables-restore < /etc/iptables
EOF