Skip to content

Instantly share code, notes, and snippets.

@denysvitali
Created May 13, 2021 08:45
Show Gist options
  • Save denysvitali/65ef3537615e345509147fc65f9ae48c to your computer and use it in GitHub Desktop.
Save denysvitali/65ef3537615e345509147fc65f9ae48c to your computer and use it in GitHub Desktop.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]
[ 0.000000] Linux version 5.11.0-custom (shawn.guo@hackbox2) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP Fri Mar 12 08:20:51 GMT 2021
[ 0.000000] efi: EFI v2.70 by Qualcomm Technologies, Inc.
[ 0.000000] efi: ACPI 2.0=0xffffe000 TPMFinalLog=0xfff63000 MEMATTR=0xfaaf4018 ESRT=0xfb1b3018 SMBIOS=0xfff5c000 TPMEventLog=0xf8193018 RNG=0xfeb2bd98 MEMRESERVE=0xf8190d98
[ 0.000000] efi: seeding entropy pool
[ 0.000000] esrt: Reserving ESRT space from 0x00000000fb1b3018 to 0x00000000fb1b3118.
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000FFFFE000 000024 (v02 QCOM )
[ 0.000000] ACPI: XSDT 0x00000000FFFFD000 000094 (v01 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: FACP 0x00000000FFF8C000 000114 (v06 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: DSDT 0x00000000FFF8D000 062098 (v02 QCOMM SDM8180 00000003 MSFT 05000000)
[ 0.000000] ACPI: MSDM 0x00000000FFFFC000 000055 (v01 MSFT 00000001 MSFT 00000001)
[ 0.000000] ACPI: BERT 0x00000000FFFFB000 000030 (v01 QCOM QCOMEDK2 00000000 QCOM 00000001)
[ 0.000000] ACPI: BGRT 0x00000000FFFFA000 000038 (v01 QCOM QCOMEDK2 00000001 QCOM 00000001)
[ 0.000000] ACPI: BGRT 0x00000000FFFF9000 000038 (v01 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: CSRT 0x00000000FFFF1000 007CB7 (v00 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: DBG2 0x00000000FFFF0000 00041A (v01 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: GTDT 0x00000000FFF8B000 00009C (v02 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: IORT 0x00000000FFF89000 001943 (v00 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: APIC 0x00000000FFF88000 0002EC (v05 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: MCFG 0x00000000FFF87000 00006C (v01 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: PPTT 0x00000000FFF86000 00019E (v01 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: TPM2 0x00000000FFF85000 000054 (v03 QCOM QCOMEDK2 00008180 QCOM 00000001)
[ 0.000000] ACPI: FPDT 0x00000000FFF84000 000044 (v01 QCOM QCOMEDK2 00000001 QCOM 00000001)
[ 0.000000] ACPI: NUMA: Failed to initialise from firmware
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000df75fffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xdf5703b00-0xdf5705fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000df75fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000805fffff]
[ 0.000000] node 0: [mem 0x0000000080600000-0x00000000829fffff]
[ 0.000000] node 0: [mem 0x0000000083722000-0x00000000856fffff]
[ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085efffff]
[ 0.000000] node 0: [mem 0x0000000085f20000-0x0000000085f4ffff]
[ 0.000000] node 0: [mem 0x0000000085f50000-0x0000000085ffffff]
[ 0.000000] node 0: [mem 0x0000000086000000-0x00000000861fffff]
[ 0.000000] node 0: [mem 0x000000008b700000-0x000000009aafffff]
[ 0.000000] node 0: [mem 0x000000009ab00000-0x000000009dff7fff]
[ 0.000000] node 0: [mem 0x000000009dff8000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x000000009e000000-0x000000009e3fffff]
[ 0.000000] node 0: [mem 0x000000009e400000-0x000000009f7fffff]
[ 0.000000] node 0: [mem 0x000000009f800000-0x000000009ff8ffff]
[ 0.000000] node 0: [mem 0x000000009ff90000-0x000000009ff91fff]
[ 0.000000] node 0: [mem 0x000000009ffb0000-0x000000009ffcffff]
[ 0.000000] node 0: [mem 0x000000009ffd0000-0x000000009fffffff]
[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000fea51fff]
[ 0.000000] node 0: [mem 0x00000000fea52000-0x00000000fff6afff]
[ 0.000000] node 0: [mem 0x00000000fff6b000-0x000000027fffffff]
[ 0.000000] node 0: [mem 0x0000000c00000000-0x0000000df75fffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 774 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000df75fffff]
[ 0.000000] On node 0 totalpages: 4132256
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 497568 pages, LIFO batch:63
[ 0.000000] Normal zone: 56792 pages used for memmap
[ 0.000000] Normal zone: 3634688 pages, LIFO batch:63
[ 0.000000] cma: Reserved 64 MiB at 0x00000000eec00000
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] ACPI: SRAT not present
[ 0.000000] percpu: Embedded 33 pages/cpu s95640 r8192 d31336 u135168
[ 0.000000] pcpu-alloc: s95640 r8192 d31336 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4067272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/install.a64/vmlinuz efi=novamap pd_ignore_unused clk_ignore_unused preseed/file=/cdrom/simple-cdd/default.preseed simple-cdd/profiles=gnome desktop=gnome --- quiet
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000eac00000-0x00000000eec00000] (64MB)
[ 0.000000] Memory: 2541096K/16529024K available (12288K kernel code, 2832K rwdata, 4568K rodata, 5888K init, 580K bss, 778368K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x510 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 41973 entries in 164 pages
[ 0.000000] ftrace: allocated 164 pages with 3 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: 928 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[ 0.000000] ACPI: SRAT not present
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] ACPI GTDT: found 1 memory-mapped timer block(s).
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000095] Console: colour dummy device 80x25
[ 0.000129] printk: console [tty0] enabled
[ 0.000183] ACPI: Core revision 20201113
[ 0.001635] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001646] pid_max: default: 32768 minimum: 301
[ 0.001712] LSM: Security Framework initializing
[ 0.001728] Yama: becoming mindful.
[ 0.001791] AppArmor: AppArmor initialized
[ 0.001799] TOMOYO Linux initialized
[ 0.001855] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.001880] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.003095] rcu: Hierarchical SRCU implementation.
[ 0.003581] Remapping and enabling EFI services.
[ 0.003977] smp: Bringing up secondary CPUs ...
[ 0.005007] Detected VIPT I-cache on CPU1
[ 0.005037] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[ 0.005083] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
[ 0.006147] Detected VIPT I-cache on CPU2
[ 0.006170] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[ 0.006212] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
[ 0.007301] Detected VIPT I-cache on CPU3
[ 0.007322] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[ 0.007363] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
[ 0.009400] CPU features: detected: Spectre-v2
[ 0.009418] CPU features: detected: Spectre-v4
[ 0.009423] CPU features: detected: ARM erratum 1418040
[ 0.009427] Detected PIPT I-cache on CPU4
[ 0.009449] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 0.009466] arch_timer: Enabling local workaround for ARM erratum 1418040
[ 0.009495] CPU4: Booted secondary processor 0x0000000400 [0x51df804e]
[ 0.010820] Detected PIPT I-cache on CPU5
[ 0.010849] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[ 0.010867] arch_timer: Enabling local workaround for ARM erratum 1418040
[ 0.010898] CPU5: Booted secondary processor 0x0000000500 [0x51df804e]
[ 0.012341] Detected PIPT I-cache on CPU6
[ 0.012370] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[ 0.012387] arch_timer: Enabling local workaround for ARM erratum 1418040
[ 0.012417] CPU6: Booted secondary processor 0x0000000600 [0x51df804e]
[ 0.013937] Detected PIPT I-cache on CPU7
[ 0.013966] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[ 0.013984] arch_timer: Enabling local workaround for ARM erratum 1418040
[ 0.014015] CPU7: Booted secondary processor 0x0000000700 [0x51df804e]
[ 0.014084] smp: Brought up 1 node, 8 CPUs
[ 0.014098] SMP: Total of 8 processors activated.
[ 0.014101] CPU features: detected: Privileged Access Never
[ 0.014104] CPU features: detected: LSE atomic instructions
[ 0.014107] CPU features: detected: 32-bit EL0 Support
[ 0.014110] CPU features: detected: Common not Private translations
[ 0.014113] CPU features: detected: Data cache clean to Point of Persistence
[ 0.014116] CPU features: detected: RAS Extension Support
[ 0.014118] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.014121] CPU features: detected: CRC32 instructions
[ 0.014125] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.032789] CPU: All CPU(s) started at EL1
[ 0.032830] alternatives: patching kernel code
[ 0.530057] node 0 deferred pages initialised in 496ms
[ 0.531864] devtmpfs: initialized
[ 0.533100] Registered cp15_barrier emulation handler
[ 0.533112] Registered setend emulation handler
[ 0.533118] KASLR enabled
[ 0.533302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.533324] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.534942] pinctrl core: initialized pinctrl subsystem
[ 0.535403] SMBIOS 3.3 present.
[ 0.535417] DMI: Microsoft Corporation Surface Pro X/Surface Pro X, BIOS 7.545.140 11/09/2020
[ 0.535803] NET: Registered protocol family 16
[ 0.537015] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.537395] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.538157] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.538184] audit: initializing netlink subsys (disabled)
[ 0.538301] audit: type=2000 audit(0.536:1): state=initialized audit_enabled=0 res=1
[ 0.538717] thermal_sys: Registered thermal governor 'fair_share'
[ 0.538722] thermal_sys: Registered thermal governor 'step_wise'
[ 0.538772] cpuidle: using governor ladder
[ 0.538785] cpuidle: using governor menu
[ 0.538930] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.539054] ASID allocator initialised with 32768 entries
[ 0.539126] ACPI: bus type PCI registered
[ 0.539131] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.539282] Serial: AMBA PL011 UART driver
[ 0.543596] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.543602] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.543606] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.543610] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.593674] ACPI: Added _OSI(Module Device)
[ 1.593681] ACPI: Added _OSI(Processor Device)
[ 1.593684] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.593687] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.593691] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.593694] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.593698] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 1.638477] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [BAUD] at bit offset/length 352/32 exceeds size of target Buffer (272 bits) (20201113/dsopcode-198)
[ 1.646679] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.654447] ACPI Error: AE_TYPE, Opcode is not deferred [BAUD] (BufferField) (20201113/nsinit-411)
[ 1.654469] ACPI Error: AE_TYPE, Could not execute arguments for [BAUD] (BufferField) (20201113/nsinit-419)
[ 1.657170] ACPI: Interpreter enabled
[ 1.657174] ACPI: Using GIC for interrupt routing
[ 1.657220] ACPI: MCFG table detected, 4 entries
[ 1.668895] ACPI: Power Resource [P0RR] (off)
[ 1.668983] ACPI: Power Resource [R0RR] (off)
[ 1.669311] ACPI: Power Resource [P1RR] (off)
[ 1.669399] ACPI: Power Resource [R1RR] (off)
[ 1.669554] ACPI: Power Resource [P2RR] (off)
[ 1.669647] ACPI: Power Resource [R2RR] (off)
[ 1.669798] ACPI: Power Resource [P3RR] (off)
[ 1.669883] ACPI: Power Resource [R3RR] (off)
[ 1.682928] gpio gpiochip0: (QCOM040D:00): setup of own GPIO ACPI:Event failed
[ 1.682946] sc8180x-pinctrl QCOM040D:00: Failed to request GPIO for pin 0x00BD, err -517
[ 1.682958] gpio gpiochip0: (QCOM040D:00): failed to get GPIO descriptor
[ 1.682966] sc8180x-pinctrl QCOM040D:00: Failed to request GPIO for pin 0x0140, err -22
[ 1.688906] ACPI: Power Resource [WRST] (on)
[ 1.690071] ACPI Warning: \_SB.GPU0._CLS: Return Package is too small - found 1 elements, expected 3 (20201113/nsprepkg-362)
[ 1.702882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
[ 1.702898] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.703210] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR]
[ 1.703498] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.708817] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0x60000000-0x601fffff] not reserved in ACPI namespace
[ 1.708834] acpi PNP0A08:00: ECAM at [mem 0x60000000-0x601fffff] for [bus 00-01]
[ 1.709166] PCI host bridge to bus 0000:00
[ 1.709174] pci_bus 0000:00: root bus resource [bus 00-01]
[ 1.709335] pci 0000:00:00.0: [17cb:0109] type 01 class 0x060400
[ 1.709408] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.709802] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.709966] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-01])
[ 1.709978] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.710289] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR]
[ 1.710577] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.714779] acpi PNP0A08:02: [Firmware Bug]: ECAM area [mem 0x70000000-0x701fffff] not reserved in ACPI namespace
[ 1.714793] acpi PNP0A08:02: ECAM at [mem 0x70000000-0x701fffff] for [bus 00-01]
[ 1.715109] PCI host bridge to bus 0002:00
[ 1.715115] pci_bus 0002:00: root bus resource [bus 00-01]
[ 1.715255] pci 0002:00:00.0: [17cb:0109] type 01 class 0x060400
[ 1.715307] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.715662] pci 0002:01:00.0: [1c5c:1327] type 00 class 0x010802
[ 1.715687] pci 0002:01:00.0: reg 0x10: [mem 0x71f00000-0x71f03fff 64bit]
[ 1.715809] pci 0002:01:00.0: supports D1
[ 1.715815] pci 0002:01:00.0: PME# supported from D0 D1 D3hot
[ 1.716028] pci 0002:00:00.0: BAR 14: no space for [mem size 0x00100000]
[ 1.716035] pci 0002:00:00.0: BAR 14: failed to assign [mem size 0x00100000]
[ 1.716043] pci 0002:01:00.0: BAR 0: no space for [mem size 0x00004000 64bit]
[ 1.716048] pci 0002:01:00.0: BAR 0: failed to assign [mem size 0x00004000 64bit]
[ 1.716054] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 1.716063] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 1.716198] ACPI: PCI Root Bridge [PCI3] (domain 0003 [bus 00-01])
[ 1.716210] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.716512] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR]
[ 1.716797] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.720950] acpi PNP0A08:03: [Firmware Bug]: ECAM area [mem 0x40000000-0x401fffff] not reserved in ACPI namespace
[ 1.720963] acpi PNP0A08:03: ECAM at [mem 0x40000000-0x401fffff] for [bus 00-01]
[ 1.721281] PCI host bridge to bus 0003:00
[ 1.721287] pci_bus 0003:00: root bus resource [bus 00-01]
[ 1.721445] pci 0003:00:00.0: [17cb:0109] type 01 class 0x060400
[ 1.721549] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.721942] pci 0003:00:00.0: PCI bridge to [bus 01]
[ 1.726077] iommu: Default domain type: Translated
[ 1.726192] vgaarb: loaded
[ 1.726451] SCSI subsystem initialized
[ 1.726479] ACPI: bus type USB registered
[ 1.726531] usbcore: registered new interface driver usbfs
[ 1.726554] usbcore: registered new interface driver hub
[ 1.726578] usbcore: registered new device driver usb
[ 1.726635] EDAC MC: Ver: 3.0.0
[ 1.726959] Registered efivars operations
[ 1.727838] NetLabel: Initializing
[ 1.727841] NetLabel: domain hash size = 128
[ 1.727845] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.727885] NetLabel: unlabeled traffic allowed by default
[ 1.728113] clocksource: Switched to clocksource arch_sys_counter
[ 1.748756] VFS: Disk quotas dquot_6.6.0
[ 1.748815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.749239] AppArmor: AppArmor Filesystem Enabled
[ 1.749416] pnp: PnP ACPI init
[ 1.751302] pnp: PnP ACPI: found 0 devices
[ 1.755821] NET: Registered protocol family 2
[ 1.760092] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.760253] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.760809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.761275] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.761380] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.761538] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.761861] NET: Registered protocol family 1
[ 1.761877] NET: Registered protocol family 44
[ 1.761907] PCI: CLS 0 bytes, default 64
[ 1.762047] Trying to unpack rootfs image as initramfs...
[ 2.668690] Freeing initrd memory: 32484K
[ 2.669248] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
[ 2.669379] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
[ 2.669389] kvm [1]: HYP mode not available
[ 2.670531] Initialise system trusted keyrings
[ 2.670559] Key type blacklist registered
[ 2.670663] workingset: timestamp_bits=42 max_order=22 bucket_order=0
[ 2.674159] zbud: loaded
[ 2.674631] integrity: Platform Keyring initialized
[ 2.674641] Key type asymmetric registered
[ 2.674645] Asymmetric key parser 'x509' registered
[ 2.674665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.674745] io scheduler mq-deadline registered
[ 2.677516] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.678052] efifb: probing for efifb
[ 2.678091] efifb: framebuffer at 0x80600000, using 21600k, total 21600k
[ 2.678096] efifb: mode is 2880x1920x32, linelength=11520, pages=1
[ 2.678100] efifb: scrolling: redraw
[ 2.678103] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.678352] Console: switching to colour frame buffer device 180x60
[ 2.723621] fb0: EFI VGA frame buffer device
[ 2.724121] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 2.724183] ACPI: Lid Switch [LID0]
[ 2.724674] [Firmware Bug]: No valid trip found
[ 2.724854] ACPI: Invalid passive threshold
[ 2.724870] [Firmware Bug]: No valid trip found
[ 2.724916] [Firmware Bug]: No valid trip found
[ 2.725046] ACPI: Invalid passive threshold
[ 2.725062] [Firmware Bug]: No valid trip found
[ 2.725191] ACPI: Invalid passive threshold
[ 2.725206] [Firmware Bug]: No valid trip found
[ 2.725336] ACPI: Invalid passive threshold
[ 2.725351] [Firmware Bug]: No valid trip found
[ 2.725479] ACPI: Invalid passive threshold
[ 2.725496] [Firmware Bug]: No valid trip found
[ 2.725624] ACPI: Invalid passive threshold
[ 2.725650] [Firmware Bug]: No valid trip found
[ 2.725810] ACPI: Invalid passive threshold
[ 2.725955] ACPI: Invalid passive threshold
[ 2.725971] [Firmware Bug]: No valid trip found
[ 2.726100] ACPI: Invalid passive threshold
[ 2.726125] [Firmware Bug]: No valid trip found
[ 2.726287] ACPI: Invalid passive threshold
[ 2.726430] ACPI: Invalid passive threshold
[ 2.726456] [Firmware Bug]: No valid trip found
[ 2.726617] ACPI: Invalid passive threshold
[ 2.726675] [Firmware Bug]: No valid trip found
[ 2.726719] [Firmware Bug]: No valid trip found
[ 2.726849] ACPI: Invalid passive threshold
[ 2.726864] [Firmware Bug]: No valid trip found
[ 2.726896] [Firmware Bug]: No valid trip found
[ 2.727059] ACPI: Invalid passive threshold
[ 2.727125] [Firmware Bug]: No valid trip found
[ 2.729749] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.730848] Serial: AMBA driver
[ 2.730958] msm_serial: driver initialized
[ 2.913653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.913664] ehci-pci: EHCI PCI platform driver
[ 2.913691] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.913698] ohci-pci: OHCI PCI platform driver
[ 2.913721] ohci-platform: OHCI generic platform driver
[ 2.913908] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 2.913922] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 2.914078] xhci-hcd xhci-hcd.3.auto: hcc params 0x0238ffe5 hci version 0x110 quirks 0x0000000000010010
[ 2.914112] xhci-hcd xhci-hcd.3.auto: irq 190, io mem 0x0a400000
[ 2.914311] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 2.914319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.914324] usb usb1: Product: xHCI Host Controller
[ 2.914329] usb usb1: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.914333] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 2.914594] hub 1-0:1.0: USB hub found
[ 2.914617] hub 1-0:1.0: 2 ports detected
[ 2.914892] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 2.914902] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 2.914911] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.914952] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.915013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 2.915020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.915026] usb usb2: Product: xHCI Host Controller
[ 2.915030] usb usb2: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.915034] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 2.915266] hub 2-0:1.0: USB hub found
[ 2.915291] hub 2-0:1.0: 2 ports detected
[ 2.915913] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 2.915925] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[ 2.916070] xhci-hcd xhci-hcd.5.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
[ 2.916104] xhci-hcd xhci-hcd.5.auto: irq 234, io mem 0x0a600000
[ 2.916285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 2.916293] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.916298] usb usb3: Product: xHCI Host Controller
[ 2.916302] usb usb3: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.916306] usb usb3: SerialNumber: xhci-hcd.5.auto
[ 2.916528] hub 3-0:1.0: USB hub found
[ 2.916548] hub 3-0:1.0: 1 port detected
[ 2.916714] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 2.916724] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[ 2.916732] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.916773] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.916838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 2.916846] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.916851] usb usb4: Product: xHCI Host Controller
[ 2.916855] usb usb4: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.916859] usb usb4: SerialNumber: xhci-hcd.5.auto
[ 2.917095] hub 4-0:1.0: USB hub found
[ 2.917120] hub 4-0:1.0: 1 port detected
[ 2.917341] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 2.917353] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[ 2.917502] xhci-hcd xhci-hcd.7.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
[ 2.917535] xhci-hcd xhci-hcd.7.auto: irq 239, io mem 0x0a800000
[ 2.917699] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 2.917706] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.917712] usb usb5: Product: xHCI Host Controller
[ 2.917716] usb usb5: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.917720] usb usb5: SerialNumber: xhci-hcd.7.auto
[ 2.917938] hub 5-0:1.0: USB hub found
[ 2.917958] hub 5-0:1.0: 1 port detected
[ 2.918124] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 2.918133] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[ 2.918141] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.1 Enhanced SuperSpeed
[ 2.918181] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.918241] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 2.918248] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.918253] usb usb6: Product: xHCI Host Controller
[ 2.918257] usb usb6: Manufacturer: Linux 5.11.0-custom xhci-hcd
[ 2.918262] usb usb6: SerialNumber: xhci-hcd.7.auto
[ 2.918483] hub 6-0:1.0: USB hub found
[ 2.918503] hub 6-0:1.0: 1 port detected
[ 2.918762] usbcore: registered new interface driver usb-storage
[ 2.918919] mousedev: PS/2 mouse device common for all mice
[ 2.919434] geni_i2c QCOM0411:00: Bus frequency not specified, default to 100kHz.
[ 2.920992] geni_i2c QCOM0411:01: Bus frequency not specified, default to 100kHz.
[ 2.922431] geni_i2c QCOM0411:02: Bus frequency not specified, default to 100kHz.
[ 2.924666] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.925003] efivars: get_next_variable: status=8000000000000003
[ 2.925012] pstore: Registered efi as persistent store backend
[ 2.925087] hid: raw HID events driver (C) Jiri Kosina
[ 2.925144] usbcore: registered new interface driver usbhid
[ 2.925147] usbhid: USB HID core driver
[ 2.926310] NET: Registered protocol family 10
[ 2.954379] Segment Routing with IPv6
[ 2.954428] mip6: Mobile IPv6
[ 2.954434] NET: Registered protocol family 17
[ 2.954498] mpls_gso: MPLS GSO support
[ 2.954735] registered taskstats version 1
[ 2.954745] Loading compiled-in X.509 certificates
[ 2.955416] zswap: loaded using pool lzo/zbud
[ 2.955669] Key type ._fscrypt registered
[ 2.955674] Key type .fscrypt registered
[ 2.955677] Key type fscrypt-provisioning registered
[ 2.955857] pstore: Using crash dump compression: deflate
[ 2.955904] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.955956] integrity: Couldn't get size: 0x8000000000000003
[ 2.956265] integrity: MODSIGN: Couldn't get UEFI db list
[ 2.956551] integrity: Couldn't get size: 0x8000000000000003
[ 2.956831] integrity: Couldn't get UEFI dbx list
[ 2.956850] integrity: Couldn't get size: 0x8000000000000003
[ 2.957131] integrity: Couldn't get UEFI MokListRT
[ 2.957702] BERT: Error records from previous boot:
[ 2.957706] [Hardware Error]: It has been corrected by h/w and requires no further action
[ 2.957710] [Hardware Error]: event severity: corrected
[ 2.957714] [Hardware Error]: Error 0, type: fatal
[ 2.957719] [Hardware Error]: section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[ 2.957724] [Hardware Error]: section length: 0x38
[ 2.957731] [Hardware Error]: 00000000: 50670071 4be7478f 548713ad 2fc679f3 q.gP.G.K...T.y./
[ 2.957737] [Hardware Error]: 00000010: 00000000 00000000 00000000 00000000 ................
[ 2.957742] [Hardware Error]: 00000020: 00000000 03050012 00000001 00000000 ................
[ 2.957746] [Hardware Error]: 00000030: 00000000 00000076 ....v...
[ 2.958339] PM: genpd: Not disabling unused power domains
[ 2.958398] clk: Not disabling unused clocks
[ 2.962441] Freeing unused kernel memory: 5888K
[ 3.159011] Checked W+X mappings: passed, no W+X pages found
[ 3.159052] Run /init as init process
[ 3.159060] with arguments:
[ 3.159064] /init
[ 3.159067] ---
[ 3.159070] with environment:
[ 3.159072] HOME=/
[ 3.159074] TERM=linux
[ 3.159076] BOOT_IMAGE=/install.a64/vmlinuz
[ 3.159079] preseed/file=/cdrom/simple-cdd/default.preseed
[ 3.159082] simple-cdd/profiles=gnome
[ 3.159085] desktop=gnome
[ 3.435490] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 3.554910] usb 6-1: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.15
[ 3.554921] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.554927] usb 6-1: Product: USB3.0 Hub
[ 3.554931] usb 6-1: Manufacturer: VIA Labs, Inc.
[ 3.575543] hub 6-1:1.0: USB hub found
[ 3.577778] hub 6-1:1.0: 4 ports detected
[ 3.668127] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[ 3.817781] usb 5-1: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.14
[ 3.817790] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.817795] usb 5-1: Product: USB2.0 Hub
[ 3.817799] usb 5-1: Manufacturer: VIA Labs, Inc.
[ 3.879499] hub 5-1:1.0: USB hub found
[ 3.880342] hub 5-1:1.0: 4 ports detected
[ 4.188129] usb 5-1.1: new high-speed USB device number 3 using xhci-hcd
[ 4.300465] usb 5-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 4.300481] usb 5-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.300486] usb 5-1.1: Product: USB 2.0 Hub
[ 4.359408] hub 5-1.1:1.0: USB hub found
[ 4.359509] hub 5-1.1:1.0: 4 ports detected
[ 4.452127] usb 5-1.2: new high-speed USB device number 4 using xhci-hcd
[ 4.564676] usb 5-1.2: New USB device found, idVendor=054c, idProduct=05b9, bcdDevice= a.00
[ 4.564692] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.564697] usb 5-1.2: Product: Storage Media
[ 4.564702] usb 5-1.2: Manufacturer: Sony
[ 4.564706] usb 5-1.2: SerialNumber: BB4001210070050695
[ 4.565432] usb-storage 5-1.2:1.0: USB Mass Storage device detected
[ 4.565718] scsi host0: usb-storage 5-1.2:1.0
[ 4.568346] usbcore: registered new interface driver uas
[ 4.748134] usb 5-1.1.2: new high-speed USB device number 5 using xhci-hcd
[ 5.335305] usb 5-1.1.2: New USB device found, idVendor=2109, idProduct=0100, bcdDevice= 2.01
[ 5.335319] usb 5-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.335325] usb 5-1.1.2: Product: USB 2.0 BILLBOARD
[ 5.335330] usb 5-1.1.2: Manufacturer: VIA Technologies Inc.
[ 5.335334] usb 5-1.1.2: SerialNumber: 0000000000000001
[ 5.568617] scsi 0:0:0:0: Direct-Access Sony Storage Media 1.00 PQ: 0 ANSI: 5
[ 5.569392] sd 0:0:0:0: [sda] 30801920 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 5.569568] sd 0:0:0:0: [sda] Write Protect is off
[ 5.569573] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 5.569742] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 5.609331] sda: sda1 sda2
[ 5.610868] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.639751] random: fast init done
[ 5.817250] random: crng init done
[ 595.796128] usb 5-1.4: new full-speed USB device number 6 using xhci-hcd
[ 595.910588] usb 5-1.4: New USB device found, idVendor=0461, idProduct=4dc6, bcdDevice= 1.00
[ 595.910598] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 595.910603] usb 5-1.4: Product: acer Wireless Optical Mouse
[ 595.910608] usb 5-1.4: Manufacturer: acer
[ 595.945533] input: acer acer Wireless Optical Mouse as /devices/platform/QCOM0497:01/dwc3.6.auto/xhci-hcd.7.auto/usb5/5-1/5-1.4/5-1.4:1.0/0003:0461:4DC6.0001/input/input1
[ 595.945787] input: acer acer Wireless Optical Mouse as /devices/platform/QCOM0497:01/dwc3.6.auto/xhci-hcd.7.auto/usb5/5-1/5-1.4/5-1.4:1.0/0003:0461:4DC6.0001/input/input2
[ 595.946039] hid-generic 0003:0461:4DC6.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [acer acer Wireless Optical Mouse] on usb-xhci-hcd.7.auto-1.4/input0
[ 868.968029] usb 5-1.4: USB disconnect, device number 6
[ 873.340128] usb 5-1.4: new low-speed USB device number 7 using xhci-hcd
[ 873.497975] usb 5-1.4: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[ 873.497985] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 873.497990] usb 5-1.4: Product: Dell USB Keyboard
[ 873.497995] usb 5-1.4: Manufacturer: Dell
[ 873.546843] input: Dell Dell USB Keyboard as /devices/platform/QCOM0497:01/dwc3.6.auto/xhci-hcd.7.auto/usb5/5-1/5-1.4/5-1.4:1.0/0003:413C:2003.0002/input/input3
[ 873.604444] hid-generic 0003:413C:2003.0002: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-xhci-hcd.7.auto-1.4/input0
[ 900.274125] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 900.276798] ISO 9660 Extensions: RRIP_1991A
[ 949.864231] usb 5-1.4: USB disconnect, device number 7
[ 952.404130] usb 5-1.4: new high-speed USB device number 8 using xhci-hcd
[ 952.521522] usb 5-1.4: New USB device found, idVendor=13fe, idProduct=4100, bcdDevice= 1.00
[ 952.521531] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 952.521537] usb 5-1.4: Product: Patriot Memory
[ 952.521541] usb 5-1.4: Manufacturer:
[ 952.521545] usb 5-1.4: SerialNumber: C0003C1622B2DE93
[ 952.522163] usb-storage 5-1.4:1.0: USB Mass Storage device detected
[ 952.522412] scsi host1: usb-storage 5-1.4:1.0
[ 953.538105] scsi 1:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6
[ 955.039951] sd 1:0:0:0: [sdb] 15267823 512-byte logical blocks: (7.82 GB/7.28 GiB)
[ 955.040166] sd 1:0:0:0: [sdb] Write Protect is off
[ 955.040176] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 955.040388] sd 1:0:0:0: [sdb] No Caching mode page found
[ 955.040395] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 955.063876] sdb: sdb1
[ 955.065850] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 955.772130] usb 5-1.3: new low-speed USB device number 9 using xhci-hcd
[ 955.929982] usb 5-1.3: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06
[ 955.929991] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 955.929996] usb 5-1.3: Product: Dell USB Keyboard
[ 955.930001] usb 5-1.3: Manufacturer: Dell
[ 955.978865] input: Dell Dell USB Keyboard as /devices/platform/QCOM0497:01/dwc3.6.auto/xhci-hcd.7.auto/usb5/5-1/5-1.3/5-1.3:1.0/0003:413C:2003.0003/input/input4
[ 956.036456] hid-generic 0003:413C:2003.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-xhci-hcd.7.auto-1.3/input0
[ 1100.329227] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment