Created
April 27, 2019 01:05
-
-
Save deomorxsy/14e3f9e6de85ebf55574537f136c435f to your computer and use it in GitHub Desktop.
the last diagnostic of a HD with possible Bad Blocks.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.28-1-MANJARO] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Samsung SpinPoint M8 (AF) | |
| Device Model: ST500LM012 HN-M500MBB | |
| Serial Number: S2ZAJ5ED500091 | |
| LU WWN Device Id: 5 0004cf 4011ae564 | |
| Firmware Version: 2AR20002 | |
| User Capacity: 500,107,862,016 bytes [500 GB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5400 rpm | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 6 | |
| SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Fri Apr 26 22:03:14 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| AAM feature is: Disabled | |
| APM level is: 254 (maximum performance) | |
| Rd look-ahead is: Enabled | |
| Write cache is: Enabled | |
| DSN feature is: Unavailable | |
| ATA Security is: Disabled, frozen [SEC2] | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 121) The previous self-test completed having | |
| the read element of the test failed. | |
| Total time to complete Offline | |
| data collection: ( 6540) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 109) minutes. | |
| SCT capabilities: (0x003f) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
| 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 41497 | |
| 2 Throughput_Performance -OS--K 252 252 000 - 0 | |
| 3 Spin_Up_Time PO---K 091 081 025 - 2864 | |
| 4 Start_Stop_Count -O--CK 095 095 000 - 5349 | |
| 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 | |
| 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 | |
| 8 Seek_Time_Performance --S--K 252 252 015 - 0 | |
| 9 Power_On_Hours -O--CK 100 100 000 - 4768 | |
| 10 Spin_Retry_Count -O--CK 252 252 051 - 0 | |
| 11 Calibration_Retry_Count -O--CK 100 100 000 - 589 | |
| 12 Power_Cycle_Count -O--CK 095 095 000 - 5358 | |
| 191 G-Sense_Error_Rate -O---K 100 100 000 - 74 | |
| 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 | |
| 194 Temperature_Celsius -O---- 061 045 000 - 39 (Min/Max 15/56) | |
| 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 | |
| 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 | |
| 197 Current_Pending_Sector -O--CK 093 092 000 - 626 | |
| 198 Offline_Uncorrectable ----CK 252 252 000 - 0 | |
| 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 | |
| 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 3697 | |
| 223 Load_Retry_Count -O--CK 100 100 000 - 589 | |
| 225 Load_Cycle_Count -O--CK 092 092 000 - 89840 | |
| ||||||_ K auto-keep | |
| |||||__ C event count | |
| ||||___ R error rate | |
| |||____ S speed/performance | |
| ||_____ O updated online | |
| |______ P prefailure warning | |
| General Purpose Log Directory Version 1 | |
| SMART Log Directory Version 1 [multi-sector log support] | |
| Address Access R/W Size Description | |
| 0x00 GPL,SL R/O 1 Log Directory | |
| 0x01 SL R/O 1 Summary SMART error log | |
| 0x02 SL R/O 2 Comprehensive SMART error log | |
| 0x03 GPL R/O 2 Ext. Comprehensive SMART error log | |
| 0x06 SL R/O 1 SMART self-test log | |
| 0x07 GPL R/O 2 Extended self-test log | |
| 0x08 GPL R/O 2 Power Conditions log | |
| 0x09 SL R/W 1 Selective self-test log | |
| 0x10 GPL R/O 1 NCQ Command Error log | |
| 0x11 GPL R/O 1 SATA Phy Event Counters log | |
| 0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
| 0xc0-0xdf GPL,SL VS 16 Device vendor specific log | |
| 0xe0 GPL,SL R/W 1 SCT Command/Status | |
| 0xe1 GPL,SL R/W 1 SCT Data Transfer | |
| SMART Extended Comprehensive Error Log Version: 1 (2 sectors) | |
| Device Error Count: 9860 (device log contains only the most recent 8 errors) | |
| CR = Command Register | |
| FEATR = Features Register | |
| COUNT = Count (was: Sector Count) Register | |
| LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
| LH = LBA High (was: Cylinder High) Register ] LBA | |
| LM = LBA Mid (was: Cylinder Low) Register ] Register | |
| LL = LBA Low (was: Sector Number) Register ] | |
| DV = Device (was: Device/Head) Register | |
| DC = Device Control Register | |
| ER = Error register | |
| ST = Status register | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 9860 [3] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 f0 00 00 11 7a 5e c0 40 00 Error: UNC at LBA = 0x117a5ec0 = 293232320 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 02 01 00 00 00 11 7a 5e b0 40 00 00:00:01.374 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 11 7a 64 b0 40 00 00:00:01.392 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 11 7a 63 b0 40 00 00:00:01.392 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 11 7a 62 b0 40 00 00:00:01.391 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 11 7a 61 b0 40 00 00:00:01.391 READ FPDMA QUEUED | |
| Error 9859 [2] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 01 00 00 00 11 7a 3c b0 40 00 Error: UNC at LBA = 0x117a3cb0 = 293223600 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 02 01 00 00 00 11 7a 3c b0 40 00 00:00:01.373 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 11 7a 3c b0 40 00 00:00:01.382 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.382 SET FEATURES [Enable write cache] | |
| 00 00 02 00 08 00 00 00 63 75 a8 40 00 00:00:01.382 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 60 00 02 01 00 00 00 11 7a 3c b0 40 00 00:00:01.373 READ FPDMA QUEUED | |
| Error 9858 [1] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 01 00 00 00 11 7a 3c b0 40 00 Error: UNC at LBA = 0x117a3cb0 = 293223600 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 02 01 00 00 00 11 7a 3c b0 40 00 00:00:01.373 READ FPDMA QUEUED | |
| 60 00 00 01 00 00 00 11 7a 3c b0 40 00 00:00:01.380 READ FPDMA QUEUED | |
| 60 00 00 01 00 00 00 11 7a 3b b0 40 00 00:00:01.379 READ FPDMA QUEUED | |
| 60 00 00 01 00 00 00 11 7a 3a b0 40 00 00:00:01.379 READ FPDMA QUEUED | |
| 60 00 00 01 00 00 00 11 7a 39 b0 40 00 00:00:01.379 READ FPDMA QUEUED | |
| Error 9857 [0] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 48 00 00 00 63 6e 78 40 00 Error: UNC at LBA = 0x00636e78 = 6516344 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 00 63 6d c0 40 00 00:00:01.367 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.367 SET FEATURES [Enable write cache] | |
| 00 00 00 00 08 00 00 00 01 0d 40 40 00 00:00:01.367 NOP [Abort queued commands] | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| Error 9856 [7] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 48 00 00 00 63 6e 78 40 00 Error: UNC at LBA = 0x00636e78 = 6516344 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 00 63 6d c0 40 00 00:00:01.364 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.364 SET FEATURES [Enable write cache] | |
| 00 00 00 00 08 00 00 00 01 2d 50 40 00 00:00:01.364 NOP [Abort queued commands] | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| Error 9855 [6] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 48 00 00 00 63 6e 78 40 00 Error: UNC at LBA = 0x00636e78 = 6516344 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 00 63 6d c0 40 00 00:00:01.362 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.362 SET FEATURES [Enable write cache] | |
| 00 00 00 00 10 00 00 00 01 2d 88 40 00 00:00:01.362 NOP [Abort queued commands] | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| Error 9854 [5] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 48 00 00 00 63 6e 78 40 00 Error: UNC at LBA = 0x00636e78 = 6516344 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 00 63 6d c0 40 00 00:00:01.359 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.359 SET FEATURES [Enable write cache] | |
| 00 00 00 00 08 00 00 00 01 0d 48 40 00 00:00:01.359 NOP [Abort queued commands] | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| Error 9853 [4] occurred at disk power-on lifetime: 4767 hours (198 days + 15 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER -- ST COUNT LBA_48 LH LM LL DV DC | |
| -- -- -- == -- == == == -- -- -- -- -- | |
| 40 -- 41 00 48 00 00 00 63 6e 78 40 00 Error: UNC at LBA = 0x00636e78 = 6516344 | |
| Commands leading to the command that caused the error were: | |
| CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
| -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| 60 00 02 01 00 00 00 00 63 6d c0 40 00 00:00:01.357 READ FPDMA QUEUED | |
| ef 00 02 00 00 00 00 00 00 00 00 00 00 00:00:01.357 SET FEATURES [Enable write cache] | |
| 00 00 00 00 40 00 00 00 00 09 68 40 00 00:00:01.357 NOP [Abort queued commands] | |
| 60 00 00 01 00 00 00 00 63 6d c0 40 00 00:00:01.345 READ FPDMA QUEUED | |
| SMART Extended Self-test Log Version: 1 (2 sectors) | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed: read failure 90% 4768 17576 | |
| # 2 Short offline Completed: read failure 90% 4768 17576 | |
| # 3 Short offline Completed: read failure 90% 4761 2880 | |
| # 4 Short offline Completed: read failure 90% 4759 2880 | |
| # 5 Short offline Completed: read failure 90% 4747 2880 | |
| # 6 Short offline Completed: read failure 90% 4743 2880 | |
| # 7 Extended offline Completed: read failure 90% 4743 2880 | |
| # 8 Extended offline Completed: read failure 90% 4743 2880 | |
| # 9 Short offline Completed: read failure 90% 4742 2880 | |
| SMART Selective self-test log data structure revision number 0 | |
| Note: revision number not 1 implies that no selective self-test has ever been run | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Completed_read_failure [90% left] (0-65535) | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| SCT Status Version: 2 | |
| SCT Version (vendor specific): 256 (0x0100) | |
| Device State: Active (0) | |
| Current Temperature: 39 Celsius | |
| Power Cycle Min/Max Temperature: 35/39 Celsius | |
| Lifetime Min/Max Temperature: -2/56 Celsius | |
| Specified Max Operating Temperature: 80 Celsius | |
| Under/Over Temperature Limit Count: 0/0 | |
| SCT Temperature History Version: 2 | |
| Temperature Sampling Period: 5 minutes | |
| Temperature Logging Interval: 5 minutes | |
| Min/Max recommended Temperature: -5/80 Celsius | |
| Min/Max Temperature Limit: -10/85 Celsius | |
| Temperature History Size (Index): 128 (97) | |
| Index Estimated Time Temperature Celsius | |
| 98 2019-04-26 11:25 39 ******************** | |
| 99 2019-04-26 11:30 41 ********************** | |
| 100 2019-04-26 11:35 42 *********************** | |
| 101 2019-04-26 11:40 44 ************************* | |
| 102 2019-04-26 11:45 45 ************************** | |
| 103 2019-04-26 11:50 46 *************************** | |
| 104 2019-04-26 11:55 47 **************************** | |
| 105 2019-04-26 12:00 47 **************************** | |
| 106 2019-04-26 12:05 48 ***************************** | |
| 107 2019-04-26 12:10 48 ***************************** | |
| 108 2019-04-26 12:15 47 **************************** | |
| 109 2019-04-26 12:20 44 ************************* | |
| ... ..( 2 skipped). .. ************************* | |
| 112 2019-04-26 12:35 44 ************************* | |
| 113 2019-04-26 12:40 43 ************************ | |
| 114 2019-04-26 12:45 44 ************************* | |
| 115 2019-04-26 12:50 44 ************************* | |
| 116 2019-04-26 12:55 43 ************************ | |
| 117 2019-04-26 13:00 43 ************************ | |
| 118 2019-04-26 13:05 42 *********************** | |
| 119 2019-04-26 13:10 41 ********************** | |
| 120 2019-04-26 13:15 41 ********************** | |
| 121 2019-04-26 13:20 40 ********************* | |
| 122 2019-04-26 13:25 41 ********************** | |
| 123 2019-04-26 13:30 40 ********************* | |
| ... ..( 2 skipped). .. ********************* | |
| 126 2019-04-26 13:45 40 ********************* | |
| 127 2019-04-26 13:50 41 ********************** | |
| 0 2019-04-26 13:55 40 ********************* | |
| 1 2019-04-26 14:00 41 ********************** | |
| 2 2019-04-26 14:05 40 ********************* | |
| 3 2019-04-26 14:10 41 ********************** | |
| 4 2019-04-26 14:15 39 ******************** | |
| 5 2019-04-26 14:20 39 ******************** | |
| 6 2019-04-26 14:25 40 ********************* | |
| 7 2019-04-26 14:30 39 ******************** | |
| 8 2019-04-26 14:35 39 ******************** | |
| 9 2019-04-26 14:40 40 ********************* | |
| 10 2019-04-26 14:45 41 ********************** | |
| 11 2019-04-26 14:50 42 *********************** | |
| 12 2019-04-26 14:55 42 *********************** | |
| 13 2019-04-26 15:00 43 ************************ | |
| ... ..( 3 skipped). .. ************************ | |
| 17 2019-04-26 15:20 43 ************************ | |
| 18 2019-04-26 15:25 44 ************************* | |
| 19 2019-04-26 15:30 44 ************************* | |
| 20 2019-04-26 15:35 39 ******************** | |
| 21 2019-04-26 15:40 40 ********************* | |
| 22 2019-04-26 15:45 41 ********************** | |
| 23 2019-04-26 15:50 42 *********************** | |
| 24 2019-04-26 15:55 42 *********************** | |
| 25 2019-04-26 16:00 43 ************************ | |
| 26 2019-04-26 16:05 44 ************************* | |
| 27 2019-04-26 16:10 43 ************************ | |
| 28 2019-04-26 16:15 43 ************************ | |
| 29 2019-04-26 16:20 44 ************************* | |
| 30 2019-04-26 16:25 46 *************************** | |
| 31 2019-04-26 16:30 46 *************************** | |
| 32 2019-04-26 16:35 47 **************************** | |
| ... ..( 2 skipped). .. **************************** | |
| 35 2019-04-26 16:50 47 **************************** | |
| 36 2019-04-26 16:55 48 ***************************** | |
| ... ..( 6 skipped). .. ***************************** | |
| 43 2019-04-26 17:30 48 ***************************** | |
| 44 2019-04-26 17:35 47 **************************** | |
| 45 2019-04-26 17:40 48 ***************************** | |
| 46 2019-04-26 17:45 49 ****************************** | |
| 47 2019-04-26 17:50 49 ****************************** | |
| 48 2019-04-26 17:55 48 ***************************** | |
| 49 2019-04-26 18:00 46 *************************** | |
| 50 2019-04-26 18:05 45 ************************** | |
| 51 2019-04-26 18:10 45 ************************** | |
| 52 2019-04-26 18:15 45 ************************** | |
| 53 2019-04-26 18:20 43 ************************ | |
| 54 2019-04-26 18:25 42 *********************** | |
| 55 2019-04-26 18:30 42 *********************** | |
| 56 2019-04-26 18:35 42 *********************** | |
| 57 2019-04-26 18:40 41 ********************** | |
| 58 2019-04-26 18:45 41 ********************** | |
| 59 2019-04-26 18:50 41 ********************** | |
| 60 2019-04-26 18:55 42 *********************** | |
| 61 2019-04-26 19:00 42 *********************** | |
| 62 2019-04-26 19:05 42 *********************** | |
| 63 2019-04-26 19:10 44 ************************* | |
| 64 2019-04-26 19:15 45 ************************** | |
| 65 2019-04-26 19:20 45 ************************** | |
| 66 2019-04-26 19:25 46 *************************** | |
| 67 2019-04-26 19:30 46 *************************** | |
| 68 2019-04-26 19:35 46 *************************** | |
| 69 2019-04-26 19:40 47 **************************** | |
| 70 2019-04-26 19:45 47 **************************** | |
| 71 2019-04-26 19:50 47 **************************** | |
| 72 2019-04-26 19:55 46 *************************** | |
| 73 2019-04-26 20:00 44 ************************* | |
| 74 2019-04-26 20:05 45 ************************** | |
| 75 2019-04-26 20:10 46 *************************** | |
| 76 2019-04-26 20:15 44 ************************* | |
| 77 2019-04-26 20:20 43 ************************ | |
| 78 2019-04-26 20:25 42 *********************** | |
| 79 2019-04-26 20:30 41 ********************** | |
| ... ..( 6 skipped). .. ********************** | |
| 86 2019-04-26 21:05 41 ********************** | |
| 87 2019-04-26 21:10 42 *********************** | |
| 88 2019-04-26 21:15 42 *********************** | |
| 89 2019-04-26 21:20 41 ********************** | |
| ... ..( 2 skipped). .. ********************** | |
| 92 2019-04-26 21:35 41 ********************** | |
| 93 2019-04-26 21:40 42 *********************** | |
| 94 2019-04-26 21:45 42 *********************** | |
| 95 2019-04-26 21:50 37 ****************** | |
| 96 2019-04-26 21:55 38 ******************* | |
| 97 2019-04-26 22:00 39 ******************** | |
| SCT Error Recovery Control: | |
| Read: Disabled | |
| Write: Disabled | |
| Device Statistics (GP/SMART Log 0x04) not supported | |
| SATA Phy Event Counters (GP Log 0x11) | |
| ID Size Value Description | |
| 0x0001 4 0 Command failed due to ICRC error | |
| 0x0002 4 0 R_ERR response for data FIS | |
| 0x0003 4 0 R_ERR response for device-to-host data FIS | |
| 0x0004 4 0 R_ERR response for host-to-device data FIS | |
| 0x0005 4 0 R_ERR response for non-data FIS | |
| 0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
| 0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
| 0x0008 4 0 Device-to-host non-data FIS retries | |
| 0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy | |
| 0x000a 4 8 Device-to-host register FISes sent due to a COMRESET | |
| 0x000b 4 0 CRC errors within host-to-device FIS | |
| 0x000d 4 0 Non-CRC errors within host-to-device FIS | |
| 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
| 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
| 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
| 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
| 0x8e00 4 0 Vendor specific | |
| 0x8e01 4 0 Vendor specific | |
| 0x8e02 4 0 Vendor specific | |
| 0x8e03 4 0 Vendor specific | |
| 0x8e04 4 0 Vendor specific | |
| 0x8e05 4 0 Vendor specific | |
| 0x8e06 4 0 Vendor specific | |
| 0x8e07 4 0 Vendor specific | |
| 0x8e08 4 0 Vendor specific | |
| 0x8e09 4 0 Vendor specific | |
| 0x8e0a 4 0 Vendor specific | |
| 0x8e0b 4 0 Vendor specific | |
| 0x8e0c 4 0 Vendor specific | |
| 0x8e0d 4 0 Vendor specific | |
| 0x8e0e 4 0 Vendor specific | |
| 0x8e0f 4 0 Vendor specific | |
| 0x8e10 4 0 Vendor specific | |
| 0x8e11 4 0 Vendor specific |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment