Tom Oberhauser devfoo-one

## HowToOTGFast.md

      
        
          
            
              
              1 file
            
          
          
            
              
              87 forks
            
          
          
            
              
              169 comments
            
          
          
            
              
              636 stars
            
          
        
        
          
              
          
          
            
                gbaman
                / HowToOTGFast.md
            
            
              Last active
              October 31, 2024 23:33
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
              
          
        
      
        
  
      
    Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).

1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.

2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.

3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i