Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Script to build Apache httpd, mod_fcgi, mod_fastcgi, mod_php and PHP 5.4.3 + FPM on WebFaction. More info: http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/
#!/bin/bash
# This program is free software. It comes without any warranty, to
# the extent permitted by applicable law. You can redistribute it
# and/or modify it under the terms of the Do What The Fuck You Want
# To Public License, Version 2, as published by Sam Hocevar. See
# http://sam.zoy.org/wtfpl/COPYING for more details. */
# Usage: sh build_httpd_php-fpm.sh INSTALL_DIR PORT_NUM
# Example: sh build_httpd_php-fpm.sh $HOME/webapps/custom_apache 12345
# This script builds a MPM Worker or MPM Prefork Apache HTTPD +
# mod_fcgid + mod_fastcgi + mod_php + PHP 5.4.3 with cgi, FastCGI, and PHP-FPM.
# Before you run this, create a "Custom app (listening on port)" from the
# WebFaction Control Panel and use the port number that is assigned to you.
# Author: Daniel Graziotin <http://task3.cc>, happy WebFaction customer
# Script Page: <http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/>
# This script takes inspiration from:
# - build_php_worker.sh by Christopher Sebastian
# See: <http://wiki.webfaction.com/attachment/wiki/MiscellaneousFiles/build_php_worker.sh>
# - http://community.webfaction.com/questions/7959/how-did-i-install-my-own-phpcurlopenssl-for-use-with-the-shared-web-server
# - http://directadmin.com/forum/showthread.php?t=41879 for the IMAP and x86_64 problem
# Used the same approach to fix tidy for x86_64
# Stop this script if an error occurs:
set -o errexit
set -o nounset
# Make sure we received the correct number of arguments:
if [ $# -ne 2 ]; then
echo "Usage: sh `basename $0` INSTALL_DIR PORT_NUM"
exit 1
fi
INSTALL_DIR=$1
PORT_NUM=$2
USERNAME=`id -un`
SRC_DIR=$INSTALL_DIR/.src
# Sanity Checks:
# Make sure PORT_NUM is a number, and that it is a sane value.
if echo "$PORT_NUM" | grep "[^0-9]" > /dev/null 2>&1 || [ $PORT_NUM -lt 1025 ]; then
echo "You should be installing this on a port number higher than 1024."
echo "Use the port that is assigned to you by the WebFaction Control Panel."
echo "Aborting."
exit 3
fi
if [ "${MPM+set}" != "set" ]; then
MPM=worker
fi
case $MPM in
worker) ;;
prefork) ;;
*) echo "Invalid MPM: $MPM. Aborting."; exit 4 ;;
esac
echo
echo "This will build an Apache $MPM MPM with CGI, FastCGI (+PHP-FPM), and mod_php."
echo "It will be installed to $INSTALL_DIR and configured to run on port $PORT_NUM."
if [ "${KEEP_SRC+set}" != "set" ]; then
# If a previous source dir exists, keep it by default:
if [ -d $SRC_DIR ]; then
KEEP_SRC=1
fi
if [ "${KEEP_SRC+set}" != "set" ]; then
echo
echo "The source code will NOT be kept. Set the KEEP_SRC environment variable to keep it."
fi
fi
echo
echo "This process will take between 40 and 60 minutes"
echo "Starting in 30 seconds. Press CTRL-C to abort."
sleep 20
COUNTDOWN=10
while [ $COUNTDOWN -gt 0 ]; do
echo "Starting in $COUNTDOWN seconds. Press CTRL-C to abort."
sleep 1
let COUNTDOWN=COUNTDOWN-1 || true
done;
echo "Starting..."
if [ ! -d $SRC_DIR ]; then
echo "Creating necessary directories..."
mkdir -p $SRC_DIR
fi
# Convert INSTALL_DIR to an absolute path:
INSTALL_DIR=`cd $INSTALL_DIR; pwd -P`
SRC_DIR=$INSTALL_DIR/.src
export LD_LIBRARY_PATH="$INSTALL_DIR/lib${LD_LIBRARY_PATH+:${LD_LIBRARY_PATH:-}}"
echo "Absolute path of INSTALL_DIR = '$INSTALL_DIR'."
echo "Absolute path of SRC_DIR = '$SRC_DIR'."
echo "LD_LIBRARY_PATH = $LD_LIBRARY_PATH"
sleep 5
echo "Building OpenSSL... (a prerequisite of imap-ssl, curl and PHP)"
cd $SRC_DIR
ls openssl-1.0.0j.tar.gz || wget http://www.openssl.org/source/openssl-1.0.0j.tar.gz
md5sum openssl-1.0.0j.tar.gz | grep cbe4ac0d8f598680f68a951e04b0996b
ls -d openssl-1.0.0j || tar xfz openssl-1.0.0j.tar.gz
cd openssl-1.0.0j
./config --prefix=$INSTALL_DIR shared `if_worker threads`
make
make install
echo "Building Apache in MPM worker mode..."
cd $SRC_DIR
ls httpd-2.2.22.tar.bz2 || wget http://apache.panu.it//httpd/httpd-2.2.22.tar.bz2
md5sum httpd-2.2.22.tar.bz2 | grep 9fe3093194c8a57f085ff7c3fc43715f
ls -d httpd-2.2.22 || tar jxf httpd-2.2.22.tar.bz2
cd httpd-2.2.22
./configure --with-mpm=$MPM --with-ldap --enable-mods-shared="all ssl ldap cache proxy authn_alias mem_cache file_cache authnz_ldap charset_lite dav_lock disk_cache" --prefix=$INSTALL_DIR --with-ssl=$INSTALL_DIR/lib
make
make install
echo "Building the mod_fcgid Apache module..."
cd $SRC_DIR
ls mod_fcgid-2.3.7.tar.gz || wget http://apache.panu.it//httpd/mod_fcgid/mod_fcgid-2.3.7.tar.gz
md5sum mod_fcgid-2.3.7.tar.gz | grep 00644cbe00321e6085e1b9a751a6506e
ls -d mod_fcgid-2.3.7 || tar zxf mod_fcgid-2.3.7.tar.gz
cd mod_fcgid-2.3.7
APXS=$INSTALL_DIR/bin/apxs ./configure.apxs
make
make install
echo "Building the mod_fastcgi Apache module..."
cd $SRC_DIR
ls mod_fastcgi-current.tar.gz || wget http://www.fastcgi.com/dist/mod_fastcgi-current.tar.gz
md5sum mod_fastcgi-current.tar.gz | grep a21a613dd5dacf4c8ad88c8550294fed
ls -d mod_fastcgi-2.4.6 || tar zxf mod_fastcgi-current.tar.gz
cd mod_fastcgi-2.4.6
$INSTALL_DIR/bin/apxs -c -i -o mod_fastcgi.so -c *.c
# this will host PHP-FPM sockets
mkdir -p $INSTALL_DIR/sockets
echo "Building cURL... (a prerequisite of PHP)"
cd $SRC_DIR
ls curl-7.24.0.tar.gz || wget http://curl.haxx.se/download/curl-7.24.0.tar.gz
md5sum curl-7.24.0.tar.gz | grep b93420f80a2baaa61a0f45214eddc2ba
ls -d curl-7.24.0 || tar zxf curl-7.24.0.tar.gz
cd curl-7.24.0
./configure --with-ssl=$INSTALL_DIR/lib --prefix=$INSTALL_DIR `if_worker --enable-thread`
make
make install
echo "Building libtidy... (a prerequisite of PHP)"
cd $SRC_DIR
ls -d tidy || cvs -z3 -d:pserver:anonymous@tidy.cvs.sourceforge.net:/cvsroot/tidy co tidy
cd tidy/build/gmake
sed -i "s@runinst_prefix=/usr/local@runinst_prefix=$INSTALL_DIR@" Makefile
sed -i "s@devinst_prefix=/usr/local@devinst_prefix=$INSTALL_DIR@" Makefile
sed -i "97 s/.*/CFLAGS += -fPIC/" Makefile
make
make install
echo "Building libc-client... (a prerequisite of PHP imap)"
cd $SRC_DIR
#c-client has a really clumsy make file that depends on this:
mkdir -p $INSTALL_DIR/ssl
if [ ! -d $INSTALL_DIR/ssl/include ]; then
ln -s $INSTALL_DIR/include $INSTALL_DIR/ssl/include
fi
if [ ! -d $INSTALL_DIR/ssl/lib ]; then
ln -s $INSTALL_DIR/lib $INSTALL_DIR/ssl/lib
fi
ls imap-2007f.tar.gz || wget ftp://ftp.cac.washington.edu/imap/imap-2007f.tar.gz
md5sum imap-2007f.tar.gz | grep 2126fd125ea26b73b20f01fcd5940369
ls -d imap-2007f || tar zxf imap-2007f.tar.gz
cd imap-2007f
sed -i "s@SSLDIR=/usr/local/ssl@SSLDIR=$INSTALL_DIR/ssl@" src/osdep/unix/Makefile
sed -i '57 s/.*/#define FD_SETSIZE 32768/' src/osdep/unix/os_art.c
sed -i '57 s/.*/#define FD_SETSIZE 32768/' src/osdep/unix/os_sv2.c
make clean
make slx EXTRALDFLAGS="-L$INSTALL_DIR/lib -L/usr/local/lib -L/usr/lib -ldl -lcrypt" EXTRAAUTHENTICATORS=gss EXTRACFLAGS=-fPIC
cp c-client/c-client.a $INSTALL_DIR/lib/libc-client.a
mkdir -p $INSTALL_DIR/include/imap
cp c-client/*.h c-client/linkage.c $INSTALL_DIR/include/imap/
echo "Building PHP"
cd $SRC_DIR
ls php-5.4.3.tar.gz || wget http://it.php.net/get/php-5.4.3.tar.gz/from/us.php.net/mirror
md5sum php-5.4.3.tar.gz | grep c9dccc89cc89d39e84f6e6f0cf1c8a65
ls -d php-5.4.3 || tar zxf php-5.4.3.tar.gz
cd php-5.4.3
./configure --with-apxs2=$INSTALL_DIR/bin/apxs --prefix=$INSTALL_DIR --with-config-file-path=$INSTALL_DIR/conf --enable-static --enable-shared --with-mysql --with-mysqli --with-pdo-mysql --with-mysql-sock=/var/lib/mysql/mysql.sock --with-pgsql=/usr/pgsql-9.1 --with-pdo-pgsql=/usr/pgsql-9.1 --enable-bcmath --enable-calendar --enable-exif --enable-ftp --enable-mbstring --enable-soap --enable-zip --with-curl=$INSTALL_DIR --with-freetype-dir --with-gd --with-gettext --with-gmp --with-iconv --with-jpeg-dir --with-png-dir --with-regex --with-xmlrpc --with-xsl --with-zlib-dir --with-kerberos --with-mhash --with-openssl=$INSTALL_DIR --without-pear --enable-sockets --enable-intl --with-imap=$INSTALL_DIR --with-imap-ssl=$INSTALL_DIR --with-tidy=$INSTALL_DIR --enable-cgi --enable-fpm
make
make install
libtool --finish $SRC_DIR/php-5.4.3/libs
touch $INSTALL_DIR/conf/php.ini
cat > $INSTALL_DIR/conf/httpd.conf << EOF
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.
ServerRoot "$INSTALL_DIR"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen $PORT_NUM
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding LoadModule lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by httpd -l) do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule fcgid_module modules/mod_fcgid.so
LoadModule php5_module modules/libphp5.so
LoadModule fastcgi_module modules/mod_fastcgi.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User $USERNAME
Group $USERNAME
</IfModule>
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin $USERNAME@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "$INSTALL_DIR/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
<IfModule mod_fastcgi.c>
# all .php files will be pushed to a php5-fcgi handler
AddHandler php5-fcgi .php
#action module will let us run a cgi script based on handler php5-fcgi
Action php5-fcgi /fcgi-bin/php5.external
# and we add an Alias to the fcgi location
Alias /fcgi-bin/php5.external /php5.external
FastCgiExternalServer /php5.external -socket $INSTALL_DIR/sockets/php5-fpm.socket -appConnTimeout 30 -idle-timeout 60
# now we catch this cgi script which in fact does not exists on filesystem
# we catch it on the url (Location)
<Location /fcgi-bin/php5.external>
# here we prevent direct access to this Location url,
# env=REDIRECT_STATUS will let us use this fcgi-bin url
# only after an internal redirect (by Action upper)
Order Deny,Allow
Deny from All
Allow from env=REDIRECT_STATUS
</Location>
</IfModule>
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "$INSTALL_DIR/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.htm index.php
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "$INSTALL_DIR/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>
#
# "$INSTALL_DIR/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "$INSTALL_DIR/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
EOF
echo "Creating PHP-FPM configuration"
cat $INSTALL_DIR/etc/php-fpm.conf.default > $INSTALL_DIR/etc/php-fpm.conf
SOCKET_PATH=$INSTALL_DIR/sockets/php5-fpm.socket
SED_SOCKET_STR="listen=${SOCKET_PATH}"
sed -i "143 s,.*,${SED_SOCKET_STR}," $INSTALL_DIR/etc/php-fpm.conf
cp -rf $SRC_DIR/php-5.4.3/sapi/fpm/init.d.php-fpm $INSTALL_DIR/etc/init.d.php-fpm
if [ -d "$SRC_DIR" -a "${KEEP_SRC+set}" != "set" ]; then
echo "Removing Source Directory: '$SRC_DIR'..."
rm -rf $SRC_DIR
fi
set +x # Do not print bash commands before running them.
echo
echo "Done! :)"
echo
echo
echo "To start the server, run '$INSTALL_DIR/bin/apachectl start'."
echo "To stop the server, run '$INSTALL_DIR/bin/apachectl stop'."
echo "The httpd config file is located at '$INSTALL_DIR/conf/httpd.conf'."
echo "The server logs are located at '$INSTALL_DIR/logs'."
echo "The php.ini default file is located at '$INSTALL_DIR/conf/php.ini'."
echo "The PHP-FPM config file is located at '$INSTALL_DIR/etc/php-fpm.conf'."
echo "You need to manually start PHP-FPM using '$INSTALL_DIR/sbin/php-fpm'"
echo "The default PHP-FPM init file is located at '$INSTALL_DIR/etc/init.d.php-fpm '"
echo
echo "There are several different versions of PHP installed and different ways to process it."
echo "-mod_php"
echo "-mod_fcgi"
echo "-mod_fastcgi"
echo "The default is mod_fastcgi + PHP-FPM"
echo "Now, you should edit the config file (httpd.conf) to suit your needs"
echo "Please note that the default configuration loads many modules. Stip it down."
echo "See http://task3.cc/761/httpd-mod_fcgid-mod_fastcgi-mod_php-php-fpm-on-webfaction/ for more info"
echo
set -x # Print bash commands before running them.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.