How to Install pyaudio ubuntu 16.04 LTS?

pyaudio-ubuntu-install.md

sudo apt-get install libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0
sudo apt-get install ffmpeg libav-tools
sudo pip install pyaudio

thanks diego

Mil Gracias!

`Collecting PyAudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Building wheels for collected packages: PyAudio
Building wheel for PyAudio (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-11kifqpj
cwd: /tmp/pip-install-ffwcbpr2/PyAudio/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help

error: invalid command 'bdist_wheel'

ERROR: Failed building wheel for PyAudio
Running setup.py clean for PyAudio
Failed to build PyAudio
Installing collected packages: PyAudio
Running setup.py install for PyAudio ... error
ERROR: Command errored out with exit status 1:
command: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-096oscdf/install-record.txt --single-version-externally-managed --compile --install-headers '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include/site/python3.8/PyAudio'
cwd: /tmp/pip-install-ffwcbpr2/PyAudio/
Complete output (16 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
copying src/pyaudio.py -> build/lib.linux-x86_64-3.8
running build_ext
building '_portaudio' extension
creating build/temp.linux-x86_64-3.8
creating build/temp.linux-x86_64-3.8/src
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include -I/usr/include/python3.8 -c src/_portaudiomodule.c -o build/temp.linux-x86_64-3.8/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: portaudio.h: Böyle bir dosya ya da dizin yok
29 | #include "portaudio.h"
| ^~~~~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
ERROR: Command errored out with exit status 1: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-096oscdf/install-record.txt --single-version-externally-managed --compile --install-headers '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include/site/python3.8/PyAudio' Check the logs for full command output`

`Collecting PyAudio
Using cached PyAudio-0.2.11.tar.gz (37 kB)
Building wheels for collected packages: PyAudio
Building wheel for PyAudio (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-11kifqpj
cwd: /tmp/pip-install-ffwcbpr2/PyAudio/
Complete output (6 lines):
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help

error: invalid command 'bdist_wheel'

ERROR: Failed building wheel for PyAudio
Running setup.py clean for PyAudio
Failed to build PyAudio
Installing collected packages: PyAudio
Running setup.py install for PyAudio ... error
ERROR: Command errored out with exit status 1:
command: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-096oscdf/install-record.txt --single-version-externally-managed --compile --install-headers '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include/site/python3.8/PyAudio'
cwd: /tmp/pip-install-ffwcbpr2/PyAudio/
Complete output (16 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
copying src/pyaudio.py -> build/lib.linux-x86_64-3.8
running build_ext
building '_portaudio' extension
creating build/temp.linux-x86_64-3.8
creating build/temp.linux-x86_64-3.8/src
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include -I/usr/include/python3.8 -c src/_portaudiomodule.c -o build/temp.linux-x86_64-3.8/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: portaudio.h: Böyle bir dosya ya da dizin yok
29 | #include "portaudio.h"
| ^~~~~~~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

ERROR: Command errored out with exit status 1: '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/bin/python3' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"'; file='"'"'/tmp/pip-install-ffwcbpr2/PyAudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-096oscdf/install-record.txt --single-version-externally-managed --compile --install-headers '/home/sukru/Masaüstü/YAZILIM/PYTHON/voiceAssistant/include/site/python3.8/PyAudio' Check the logs for full command output`

sudo apt-get install libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0
sudo apt-get install ffmpeg
sudo apt-get install python-pyaudio
sudo apt-get install python3-pyaudio

And done.

sudo apt-get install ffmpeg libav-tools

Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libav-tools is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
ffmpeg:i386 ffmpeg

E: Package 'libav-tools' has no installation candidate

This was the message i got but as mentioned above there was another package i386 ffmpeg to replace it. Hence at the end pyaudio downloaded successfully.
Thanks alot.

sudo apt-get install ffmpeg libav-tools

Reading package lists... Done
Building dependency tree
Reading state information... Done
Package libav-tools is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
ffmpeg:i386 ffmpeg

E: Package 'libav-tools' has no installation candidate

This was the message i got but as mentioned above there was another package i386 ffmpeg to replace it. Hence at the end pyaudio downloaded successfully.
Thanks alot.

@poonima-J

sudo apt-get update
sudo apt-get install -y libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0 ffmpeg wget git vim

try this one

i am getting these errors

eeman@eeman-Inspiron-3576:~$ sudo apt-get install libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'libasound2-dev' instead of 'libasound-dev'
libportaudio2 is already the newest version (19.6.0-1build1).
libportaudio2 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 libasound2-dev : Depends: libasound2 (= 1.2.2-2.1ubuntu2.4)
E: Unable to correct problems, you have held broken packages.
eeman@eeman-Inspiron-3576:~$ sudo apt-get install ffmpeg libav-tools
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package libav-tools is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  ffmpeg ffmpeg:i386

E: Package 'libav-tools' has no installation candidate
eeman@eeman-Inspiron-3576:~$ sudo pip install pyaudio
Collecting pyaudio
  Downloading PyAudio-0.2.11.tar.gz (37 kB)
Building wheels for collected packages: pyaudio
  Building wheel for pyaudio (setup.py) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"'; __file__='"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-3xpdi9l1
       cwd: /tmp/pip-install-mn5wi77g/pyaudio/
  Complete output (16 lines):
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.8
  copying src/pyaudio.py -> build/lib.linux-x86_64-3.8
  running build_ext
  building '_portaudio' extension
  creating build/temp.linux-x86_64-3.8
  creating build/temp.linux-x86_64-3.8/src
  x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.8 -c src/_portaudiomodule.c -o build/temp.linux-x86_64-3.8/src/_portaudiomodule.o
  src/_portaudiomodule.c:29:10: fatal error: portaudio.h: No such file or directory
     29 | #include "portaudio.h"
        |          ^~~~~~~~~~~~~
  compilation terminated.
  error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
  ----------------------------------------
  ERROR: Failed building wheel for pyaudio
  Running setup.py clean for pyaudio
Failed to build pyaudio
Installing collected packages: pyaudio
    Running setup.py install for pyaudio ... error
    ERROR: Command errored out with exit status 1:
     command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"'; __file__='"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-ofa27enw/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/pyaudio
         cwd: /tmp/pip-install-mn5wi77g/pyaudio/
    Complete output (16 lines):
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-3.8
    copying src/pyaudio.py -> build/lib.linux-x86_64-3.8
    running build_ext
    building '_portaudio' extension
    creating build/temp.linux-x86_64-3.8
    creating build/temp.linux-x86_64-3.8/src
    x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.8 -c src/_portaudiomodule.c -o build/temp.linux-x86_64-3.8/src/_portaudiomodule.o
    src/_portaudiomodule.c:29:10: fatal error: portaudio.h: No such file or directory
       29 | #include "portaudio.h"
          |          ^~~~~~~~~~~~~
    compilation terminated.
    error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
    ----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"'; __file__='"'"'/tmp/pip-install-mn5wi77g/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-ofa27enw/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/pyaudio Check the logs for full command output.

I am getting some errors

ERROR: Complete output from command /usr/bin/python3 -u -c 'import setuptools, tokenize;file='"'"'/tmp/pip-install-uriccz5b/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-0zx7264w/install-record.txt --single-version-externally-managed --compile:
ERROR: running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
copying src/pyaudio.py -> build/lib.linux-x86_64-3.7
running build_ext
building '_portaudio' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/src
gcc -pthread -Wno-unused-result -Wsign-compare -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -D_GNU_SOURCE -fPIC -fwrapv -fPIC -I/usr/include/python3.7m -c src/_portaudiomodule.c -o build/temp.linux-x86_64-3.7/src/_portaudiomodule.o
src/_portaudiomodule.c:29:10: fatal error: portaudio.h: No such file or directory
29 | #include "portaudio.h"
| ^~~~~~~~~~~~~
compilation terminated.
error: command 'gcc' failed with exit status 1
----------------------------------------
ERROR: Command "/usr/bin/python3 -u -c 'import setuptools, tokenize;file='"'"'/tmp/pip-install-uriccz5b/pyaudio/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-0zx7264w/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-uriccz5b/pyaudio/

NOTE1: I am using fedora
NOTE2: Instead of apt-get I am using dnf

i love u

How to install pyaudio in VS-code?

Этот способ подходит для python 3.10
Для python 3.11 выдает ошибку

I tried everything this whole thread has suggested
still getting the exact samew error:

error: subprocess-exited-with-error

× Building wheel for pyaudio (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [14 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-312
creating build/lib.linux-x86_64-cpython-312/pyaudio
copying src/pyaudio/init.py -> build/lib.linux-x86_64-cpython-312/pyaudio
running build_ext
building 'pyaudio._portaudio' extension
creating build/temp.linux-x86_64-cpython-312
creating build/temp.linux-x86_64-cpython-312/src
creating build/temp.linux-x86_64-cpython-312/src/pyaudio
gcc-11 -fno-strict-overflow -Wsign-compare -DNDEBUG -g -O3 -Wall -fPIC -I/usr/local/include -I/usr/include -I/home/nng8603/jarvis-AI/napyork2/include -I/home/linuxbrew/.linuxbrew/opt/python@3.12/include/python3.12 -c src/pyaudio/device_api.c -o build/temp.linux-x86_64-cpython-312/src/pyaudio/device_api.o
error: command 'gcc-11' failed: No such file or directory
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pyaudio
Failed to build pyaudio
ERROR: Could not build wheels for pyaudio, which is required to install pyproject.toml-based projects