Created
October 25, 2023 07:44
-
-
Save diplfranzhoepfinger/8085a54f2320639e93eab6c43a846061 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- esp-idf-monitor 1.3.2 on /dev/ttyUSB1 115200 --- | |
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- | |
ESP-ROM:esp32s3-20210327 | |
Build:Mar 27 2021 | |
rst:0x1 (POWERON),boot:0x29 (SPI_FAST_FLASH_BOOT) | |
SPIWP:0xee | |
mode:DIO, clock div:1 | |
load:0x3fce3818,len:0x16e0 | |
load:0x403c9700,len:0x4 | |
load:0x403c9704,len:0xc00 | |
load:0x403cc700,len:0x2eb0 | |
entry 0x403c9908 | |
I (27) boot: ESP-IDF v5.1.1 2nd stage bootloader | |
I (27) boot: compile time Oct 25 2023 09:42:04 | |
I (27) boot: Multicore bootloader | |
I (30) boot: chip revision: v0.1 | |
I (34) boot.esp32s3: Boot SPI Speed : 80MHz | |
I (39) boot.esp32s3: SPI Mode : DIO | |
I (43) boot.esp32s3: SPI Flash Size : 2MB | |
I (48) boot: Enabling RNG early entropy source... | |
I (54) boot: Partition Table: | |
I (57) boot: ## Label Usage Type ST Offset Length | |
I (64) boot: 0 nvs WiFi data 01 02 00009000 00006000 | |
I (72) boot: 1 phy_init RF data 01 01 0000f000 00001000 | |
I (79) boot: 2 factory factory app 00 00 00010000 00100000 | |
I (87) boot: End of partition table | |
I (91) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0d430h ( 54320) map | |
I (109) esp_image: segment 1: paddr=0001d458 vaddr=3fc92000 size=02838h ( 10296) load | |
I (112) esp_image: segment 2: paddr=0001fc98 vaddr=40374000 size=00380h ( 896) load | |
I (117) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=20310h (131856) map | |
I (148) esp_image: segment 4: paddr=00040338 vaddr=40374380 size=0db78h ( 56184) load | |
I (167) boot: Loaded app from partition at offset 0x10000 | |
I (167) boot: Disabling RNG early entropy source... | |
I (178) cpu_start: Multicore app | |
I (179) cpu_start: Pro cpu up. | |
I (179) cpu_start: Starting app cpu, entry point is 0x40375294 | |
0x40375294: call_start_cpu1 at /home/franz/esp-idf-v5.1.1/components/esp_system/port/cpu_start.c:154 | |
I (0) cpu_start: App cpu up. | |
I (197) cpu_start: Pro cpu start user code | |
I (197) cpu_start: cpu freq: 160000000 Hz | |
I (197) cpu_start: Application information: | |
I (200) cpu_start: Project name: usb_host_lib_example | |
I (206) cpu_start: App version: 1c93ac0 | |
I (211) cpu_start: Compile time: Oct 25 2023 09:42:15 | |
I (217) cpu_start: ELF file SHA256: ee6430a0e2247c43... | |
I (223) cpu_start: ESP-IDF: v5.1.1 | |
I (228) cpu_start: Min chip rev: v0.0 | |
I (233) cpu_start: Max chip rev: v0.99 | |
I (238) cpu_start: Chip rev: v0.1 | |
I (242) heap_init: Initializing. RAM available for dynamic allocation: | |
I (250) heap_init: At 3FC95098 len 00054678 (337 KiB): DRAM | |
I (256) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM | |
I (263) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM | |
I (269) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM | |
I (276) spi_flash: detected chip: gd | |
I (279) spi_flash: flash io: dio | |
W (283) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header. | |
I (296) sleep: Configure to isolate all GPIO pins in sleep state | |
I (303) sleep: Enable automatic switching of GPIO sleep configuration | |
I (310) app_start: Starting scheduler on CPU0 | |
I (315) app_start: Starting scheduler on CPU1 | |
I (315) main_task: Started on CPU0 | |
I (325) main_task: Calling app_main() | |
I (325) gpio: GPIO[10]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 | |
I (335) gpio: GPIO[11]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 | |
I (2345) modem_pwkey: status = 1 | |
I (2445) modem_pwkey: POWER OFF | |
I (5945) modem_pwkey: POWER OFF OK | |
I (6945) modem_pwkey: status = 1 | |
I (7945) modem_pwkey: status = 1 | |
I (8945) modem_pwkey: status = 1 | |
I (9945) modem_pwkey: status = 0 | |
I (9945) modem_pwkey: status = 0 | |
I (10045) modem_pwkey: POWER ON | |
I (11045) modem_pwkey: POWER ON OK | |
I (12045) modem_pwkey: status = 1 | |
I (12045) DAEMON: Installing USB Host Library | |
I (12075) CLASS: Registering Client | |
I (16615) CLASS: Opening device at address 1 | |
I (16615) CLASS: Getting device information | |
I (16615) CLASS: Full speed | |
I (16615) CLASS: bConfigurationValue 1 | |
I (16615) CLASS: Getting device descriptor | |
*** Device descriptor *** | |
bLength 18 | |
bDescriptorType 1 | |
bcdUSB 2.00 | |
bDeviceClass 0xef | |
bDeviceSubClass 0x2 | |
bDeviceProtocol 0x1 | |
bMaxPacketSize0 64 | |
idVendor 0x1e0e | |
idProduct 0x9011 | |
bcdDevice 1.00 | |
iManufacturer 1 | |
iProduct 2 | |
iSerialNumber 3 | |
bNumConfigurations 1 | |
I (16645) CLASS: Getting config descriptor | |
*** Configuration descriptor *** | |
bLength 9 | |
bDescriptorType 2 | |
wTotalLength 245 | |
bNumInterfaces 6 | |
bConfigurationValue 1 | |
iConfiguration 0 | |
bmAttributes 0xc0 | |
bMaxPower 500mA | |
*** Interface Association Descriptor *** | |
bLength 8 | |
bDescriptorType 11 | |
bFirstInterface 0 | |
bInterfaceCount 2 | |
bFunctionClass 0xe0 | |
bFunctionSubClass 0x1 | |
bFunctionProtocol 0x3 | |
iFunction 5 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 0 | |
bAlternateSetting 0 | |
bNumEndpoints 1 | |
bInterfaceClass 0xe0 | |
bInterfaceSubClass 0x1 | |
bInterfaceProtocol 0x3 | |
iInterface 5 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x87 EP 7 IN | |
bmAttributes 0x3 INT | |
wMaxPacketSize 64 | |
bInterval 16 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 1 | |
bAlternateSetting 0 | |
bNumEndpoints 2 | |
bInterfaceClass 0xa | |
bInterfaceSubClass 0x0 | |
bInterfaceProtocol 0x0 | |
iInterface 5 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x83 EP 3 IN | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0xc EP 12 OUT | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 2 | |
bAlternateSetting 0 | |
bNumEndpoints 2 | |
bInterfaceClass 0xff | |
bInterfaceSubClass 0x0 | |
bInterfaceProtocol 0x0 | |
iInterface 8 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x82 EP 2 IN | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0xb EP 11 OUT | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 4 | |
bAlternateSetting 0 | |
bNumEndpoints 3 | |
bInterfaceClass 0xff | |
bInterfaceSubClass 0x0 | |
bInterfaceProtocol 0x0 | |
iInterface 11 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x89 EP 9 IN | |
bmAttributes 0x3 INT | |
wMaxPacketSize 64 | |
bInterval 16 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x86 EP 6 IN | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0xf EP 15 OUT | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 5 | |
bAlternateSetting 0 | |
bNumEndpoints 3 | |
bInterfaceClass 0xff | |
bInterfaceSubClass 0x0 | |
bInterfaceProtocol 0x0 | |
iInterface 11 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x88 EP 8 IN | |
bmAttributes 0x3 INT | |
wMaxPacketSize 64 | |
bInterval 16 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x81 EP 1 IN | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0xa EP 10 OUT | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Interface descriptor *** | |
bLength 9 | |
bDescriptorType 4 | |
bInterfaceNumber 3 | |
bAlternateSetting 0 | |
bNumEndpoints 3 | |
bInterfaceClass 0xff | |
bInterfaceSubClass 0x0 | |
bInterfaceProtocol 0x0 | |
iInterface 8 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x84 EP 4 IN | |
bmAttributes 0x3 INT | |
wMaxPacketSize 16 | |
bInterval 16 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0x85 EP 5 IN | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
*** Endpoint descriptor *** | |
bLength 7 | |
bDescriptorType 5 | |
bEndpointAddress 0xe EP 14 OUT | |
bmAttributes 0x2 BULK | |
wMaxPacketSize 64 | |
bInterval 0 | |
I (16985) CLASS: Getting Manufacturer string descriptor | |
SIMCom Wireless Solution | |
I (16995) CLASS: Getting Product string descriptor | |
A76XX Series LTE Module( | |
I (17005) CLASS: Getting Serial Number string descriptor | |
200806006809080000 | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment