Created
June 16, 2024 15:46
-
-
Save diplfranzhoepfinger/a65ef8daccd200b3cb0ed70e6ff3f61c to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| --- esp-idf-monitor 1.4.0 on /dev/ttyUSB1 115200 --- | |
| --- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- | |
| ESP-ROM:esp32s3-20210327 | |
| Build:Mar 27 2021 | |
| rst:0x1 (POWERON),boot:0x2b (SPI_FAST_FLASH_BOOT) | |
| SPIWP:0xee | |
| mode:DIO, clock div:1 | |
| load:0x3fce3810,len:0x178c | |
| load:0x403c9700,len:0x4 | |
| load:0x403c9704,len:0xcbc | |
| load:0x403cc700,len:0x2d9c | |
| entry 0x403c9914 | |
| I (27) boot: ESP-IDF v5.2.2 2nd stage bootloader | |
| I (27) boot: compile time Jun 16 2024 16:45:53 | |
| I (27) boot: Multicore bootloader | |
| I (30) boot: chip revision: v0.2 | |
| I (34) boot.esp32s3: Boot SPI Speed : 80MHz | |
| I (39) boot.esp32s3: SPI Mode : DIO | |
| I (43) boot.esp32s3: SPI Flash Size : 2MB | |
| I (48) boot: Enabling RNG early entropy source... | |
| I (53) boot: Partition Table: | |
| I (57) boot: ## Label Usage Type ST Offset Length | |
| I (64) boot: 0 nvs WiFi data 01 02 00009000 00006000 | |
| I (72) boot: 1 phy_init RF data 01 01 0000f000 00001000 | |
| I (79) boot: 2 factory factory app 00 00 00010000 00100000 | |
| I (87) boot: End of partition table | |
| I (91) esp_image: segment 0: paddr=00010020 vaddr=3c020020 size=0c128h ( 49448) map | |
| I (108) esp_image: segment 1: paddr=0001c150 vaddr=3fc93700 size=029bch ( 10684) load | |
| I (111) esp_image: segment 2: paddr=0001eb14 vaddr=40374000 size=01504h ( 5380) load | |
| I (117) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=1f210h (127504) map | |
| I (148) esp_image: segment 4: paddr=0003f238 vaddr=40375504 size=0e1bch ( 57788) load | |
| I (167) boot: Loaded app from partition at offset 0x10000 | |
| I (167) boot: Disabling RNG early entropy source... | |
| I (178) cpu_start: Multicore app | |
| I (188) cpu_start: Pro cpu start user code | |
| I (188) cpu_start: cpu freq: 160000000 Hz | |
| I (188) cpu_start: Application information: | |
| I (191) cpu_start: Project name: uart_echo | |
| I (196) cpu_start: App version: 4aef611 | |
| I (201) cpu_start: Compile time: Jun 16 2024 16:46:29 | |
| I (207) cpu_start: ELF file SHA256: 8a018c1d3... | |
| I (212) cpu_start: ESP-IDF: v5.2.2 | |
| I (217) cpu_start: Min chip rev: v0.0 | |
| I (222) cpu_start: Max chip rev: v0.99 | |
| I (227) cpu_start: Chip rev: v0.2 | |
| I (232) heap_init: Initializing. RAM available for dynamic allocation: | |
| I (239) heap_init: At 3FC96990 len 00052D80 (331 KiB): RAM | |
| I (245) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM | |
| I (251) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM | |
| I (257) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM | |
| I (264) spi_flash: detected chip: gd | |
| I (268) spi_flash: flash io: dio | |
| W (272) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header. | |
| I (285) sleep: Configure to isolate all GPIO pins in sleep state | |
| I (292) sleep: Enable automatic switching of GPIO sleep configuration | |
| I (299) main_task: Started on CPU0 | |
| I (309) main_task: Calling app_main() | |
| I (309) UART TEST: Wrote 11 bytes | |
| I (309) main_task: Returned from app_main() | |
| I (349) UART TEST: Recv str: | |
| I (399) UART TEST: Recv str: ��� :orld | |
| I (449) UART TEST: Recv str: i | |
| I (489) UART TEST: Recv str: ��� z.�Hello world | |
| I (539) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (579) UART TEST: Recv str: ��� zn�Hello world | |
| I (629) UART TEST: Recv str: � | |
| I (669) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (719) UART TEST: Recv str: � | |
| I (759) UART TEST: Recv str: ��� zn�Hello world | |
| I (809) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (849) UART TEST: Recv str: ��� zn�Hello world | |
| I (899) UART TEST: Recv str: � | |
| I (939) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (989) UART TEST: Recv str: � | |
| I (1029) UART TEST: Recv str: ��� zn�Hello world | |
| I (1079) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1119) UART TEST: Recv str: ��� zn�Hello world | |
| I (1169) UART TEST: Recv str: � | |
| I (1209) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1259) UART TEST: Recv str: � | |
| I (1299) UART TEST: Recv str: ��� zn�Hello world | |
| I (1349) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1389) UART TEST: Recv str: ��� zn�Hello world | |
| I (1439) UART TEST: Recv str: � | |
| I (1479) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1529) UART TEST: Recv str: � | |
| I (1569) UART TEST: Recv str: ��� zn�Hello world | |
| I (1619) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1659) UART TEST: Recv str: ��� zn�Hello world | |
| I (1709) UART TEST: Recv str: � | |
| I (1749) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1799) UART TEST: Recv str: � | |
| I (1839) UART TEST: Recv str: ��� zn�Hello world | |
| I (1889) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (1929) UART TEST: Recv str: ��� zn�Hello world | |
| I (1979) UART TEST: Recv str: � | |
| I (2019) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2069) UART TEST: Recv str: � | |
| I (2109) UART TEST: Recv str: ��� zn�Hello world | |
| I (2159) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2199) UART TEST: Recv str: ��� zn�Hello world | |
| I (2249) UART TEST: Recv str: � | |
| I (2289) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2339) UART TEST: Recv str: � | |
| I (2379) UART TEST: Recv str: ��� zn�Hello world | |
| I (2429) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2469) UART TEST: Recv str: ��� zn�Hello world | |
| I (2519) UART TEST: Recv str: � | |
| I (2559) UART TEST: Recv str: ��� zn�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2609) UART TEST: Recv str: � | |
| I (2649) UART TEST: Recv str: ��� zn�Hello world | |
| I (2699) UART TEST: Recv str: � | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2739) UART TEST: Recv str: ��� z�Hello world | |
| I (2789) UART TEST: Recv str: � | |
| I (2829) UART TEST: Recv str: ��� z�Hello world | |
| Multiple decode errors occured: Try checking the baud rate and XTAL frequency setting in menuconfig | |
| I (2879) UART TEST: Recv str: � | |
| I (2919) UART TEST: Recv str: ��� z�Hello world | |
| I (2969) UART TEST: Recv str: � |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment