- Replace the three 18650
I recently bought a Hti ht-02 thermal imaging camera second hand. Unfortunately, I found that the time and date settings were lost after it was turned off.
As a result, the camera always started with the defaults 13/4/7 10:07.
- https://www.energy-charts.info/charts/power/chart.htm?l=de&c=DE
- https://www.electricitymaps.com/
- https://www.eex-transparency.com/de/news/ad-hoc-ticker
- https://transparency.entsoe.eu/outage-domain/r2/unavailabilityOfProductionAndGenerationUnits/show
- https://www.smard.de/home/marktdaten
- https://www.netztransparenz.de/Daten-zur-Regelenergie/reBAP/reBAP
- https://twitter.com/enappsys?ref_src=twsrc%5Egoogle%7Ctwcamp%5Eserp%7Ctwgr%5Eauthor
- https://eu.data.energy/#gb
Firefox will create a large cache if your hard drive or SSD has a lot of space. To constrain it:
- In a new tab, type or paste about:config in the address bar and press Enter/Return. Click the button accepting the risk.
- In the search box above the list, type or paste cache.d and pause while the list is filtered
- Double-click the browser.cache.disk.smart_size.enabled preference to switch the value from true to false -- this is necessary to override the size, otherwise Firefox will enlarge it again in a day or two
- Double-click the browser.cache.disk.capacity preference to display a dialog where you can edit the size, then click OK -- if this number is 7 digits, for example, 1000000, that is 1 gigabyte; if this number is 6 digits, for example, 500000, that is 500 megabytes.
- Obtain a copy of the Xgpro software. This is the official link: http://www.xgecu.com for XGecu T56/TL866II Plus Software Version 10.15
- Install Wine if required.
- Extract the contents of the XgproV10xx_setup.rar and run wine ./XgproV1013_Setup.exe or double click from file manager app. Note that the application should install fine, but you won't be able to talk to the device just yet.
- Download setupapi.dll from https://github.com/radiomanV/TL866/tree/master/wine and copy it to the same location where you installed Xgpro. This might be somewhere like ~/.wine/drive_c/Xgpro or similar.
- As root, create /etc/udev/rules.d/50-xgpro.rules and add the following:
SUBSYSTEM=="usb", ATTR{idVendor}=="a466", ATTR{idProduct}=="0a53", GROUP="plugdev", MODE="0666"
- download OVF tool from VMware
- convert your VMWare VM via
ovftool source.vmx export.ovf
- import in VirtualBox
HowTo Replace the old 3.5" floppy drive of an Roland EM-55 keyboard with an (USB-stick) GOTEK floppy emulator
Buy an Gotek Floppy Emulator
- e.g. this model SFR1M44 U100 USB Floppy Drive Emulator e.g. this one https://www.amazon.de/gp/product/B07DN6VTK5
- see also https://github.com/keirf/flashfloppy/wiki/Gotek-Models
You also may need a USB-A (male) to USB-A (male) cable for fimware update of the emulator
NewerOlder