Skip to content

Instantly share code, notes, and snippets.

@dlangille

dlangille/099 - failure on Monday

Last active April 25, 2016 15:26
Show Gist options
  • Save dlangille/1fa3135334089c6603e2ec5da946d9ae to your computer and use it in GitHub Desktop.
Save dlangille/1fa3135334089c6603e2ec5da946d9ae to your computer and use it in GitHub Desktop.
Download ZIP
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8d 90 c6 18 00 00 10 00 length 8192 SMID 774 terminated ioc 804b scsi 0 state c xfer 0
Raw
099 - failure on Monday
Apr 25 05:34:50 knew kernel: mps1: mpssas_prepare_remove: Sending reset for target ID 17
Apr 25 05:34:50 knew kernel: da7 at mps1 bus 0 scbus1 target 17 lun 0
Apr 25 05:34:50 knew kernel: da7: <ATA TOSHIBA DT01ACA3 ABB0> s/n 13Q8PNBYS detached
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 53 e0 00 00 08 00 length 4096 SMID 88 terminated ioc 804b scsi 0 state c xfer 0
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 26 f8 00 00 20 00 length 16384 SMID 204 terminated ioc 804b scsi 0 state c xfer(da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 53 e0 00 00 08 00
Apr 25 05:34:51 knew kernel: 0
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 26 d8 00 00 20 00 length 16384 SMID 260 terminated ioc 804b scsi 0 state c xfer(da7: 0
Apr 25 05:34:51 knew kernel: mps1:0: (da7:mps1:0:17:0): READ(10). CDB: 28 00 e6 6c 42 40 00 00 10 00 length 8192 SMID 484 terminated ioc 804b scsi 0 state c xfer 17:0
Apr 25 05:34:51 knew kernel: 0): (da7:mps1:0:17:0): WRITE(10). CDB: 2a 00 e4 d8 2a 90 00 00 90 00 length 73728 SMID 548 terminated ioc 804b scsi 0 state c xfeError 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: r 0
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 26 f8 00 00 20 00
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 4d ac ed b8 00 00 08 00 length 4096 SMID 435 terminated ioc 804b scsi 0 state c xfer (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: 0
Apr 25 05:34:51 knew kernel: (da7:mps1: mps1:0:IOCStatus = 0x4b while resetting device 0xa
Apr 25 05:34:51 knew kernel: 17:mps1: 0): Unfreezing devq for target ID 17
Apr 25 05:34:51 knew kernel: Error 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 d8 33 26 d8 00 00 20 00
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): Error 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 e6 6c 42 40 00 00 10 00
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): Error 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): WRITE(10). CDB: 2a 00 e4 d8 2a 90 00 00 90 00
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): Error 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 4d ac ed b8 00 00 08 00
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): CAM status: Unconditionally Re-queue Request
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): Error 5, Periph was invalidated
Apr 25 05:34:51 knew kernel: GEOM_MIRROR: Device swap: provider da7p2 disconnected.
Apr 25 05:34:51 knew devd: Executing 'logger -p kern.notice -t ZFS 'vdev is removed, pool_guid=15378250086669402288 vdev_guid=13410079654596185797''
Apr 25 05:34:51 knew kernel: (da7:mps1:0:17:0): Periph destroyed
Apr 25 05:34:51 knew ZFS: vdev is removed, pool_guid=15378250086669402288 vdev_guid=13410079654596185797
Apr 25 07:49:23 knew nrpe[15302]: Error: Could not complete SSL handshake. 5
NOTE the scrub completed after the above errors.
zpool status system
pool: system
state: DEGRADED
status: One or more devices has been removed by the administrator.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Online the device using 'zpool online' or replace the device with
'zpool replace'.
scan: scrub repaired 0 in 28h49m with 0 errors on Mon Apr 25 08:27:38 2016
config:
NAME STATE READ WRITE CKSUM
system DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
da0p3 ONLINE 0 0 0
da1p3 ONLINE 0 0 0
da2p3 ONLINE 0 0 0
da3p3 ONLINE 0 0 0
da4p3 ONLINE 0 0 0
da5p3 ONLINE 0 0 0
ada0p3 ONLINE 0 0 0
da6p3 ONLINE 0 0 0
ada3p3 ONLINE 0 0 0
13410079654596185797 REMOVED 0 0 0 was /dev/da7p3
logs
mirror-1 ONLINE 0 0 0
ada1p1 ONLINE 0 0 0
ada2p1 ONLINE 0 0 0
Raw
100 - after reboot
I pulled the HDD in question & reseated the drive and cables. I replace a fan which had died. There is another exhaust
fan, so cooling is not a factor.
Upon reboot, the gmirror for swap recovered:
$ gmirror status
Name Status Components
mirror/swap COMPLETE ada0p2 (ACTIVE)
ada3p2 (ACTIVE)
da0p2 (ACTIVE)
da1p2 (ACTIVE)
da2p2 (ACTIVE)
da3p2 (ACTIVE)
da4p2 (ACTIVE)
da5p2 (ACTIVE)
da6p2 (ACTIVE)
da7p2 (ACTIVE)
And the raidz-2 is recovering:
$ zpool status
pool: system
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Mon Apr 25 14:51:22 2016
7.22G scanned out of 18.7T at 42.2M/s, 128h45m to go
703M resilvered, 0.04% done
config:
NAME STATE READ WRITE CKSUM
system ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
da0p3 ONLINE 0 0 0
da1p3 ONLINE 0 0 0
da2p3 ONLINE 0 0 0
da3p3 ONLINE 0 0 0
da4p3 ONLINE 0 0 0
da5p3 ONLINE 0 0 0
ada0p3 ONLINE 0 0 3 (resilvering)
da6p3 ONLINE 0 0 0
ada3p3 ONLINE 0 0 0
da7p3 ONLINE 0 0 3 (resilvering)
logs
mirror-1 ONLINE 0 0 0
ada1p1 ONLINE 0 0 0
ada2p1 ONLINE 0 0 0
errors: No known data errors
pool: zoomzoom
state: ONLINE
scan: scrub repaired 0 in 0h1m with 0 errors on Thu Apr 21 03:33:30 2016
config:
NAME STATE READ WRITE CKSUM
zoomzoom ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
ada2p2 ONLINE 0 0 0
errors: No known data errors
Raw
110 - resilver done in 30 minutes
$ zpool status system
pool: system
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: resilvered 19.5G in 0h31m with 0 errors on Mon Apr 25 15:23:17 2016
config:
NAME STATE READ WRITE CKSUM
system ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
da0p3 ONLINE 0 0 0
da1p3 ONLINE 0 0 0
da2p3 ONLINE 0 0 0
da3p3 ONLINE 0 0 0
da4p3 ONLINE 0 0 0
da5p3 ONLINE 0 0 0
ada0p3 ONLINE 0 0 4
da6p3 ONLINE 0 0 0
ada3p3 ONLINE 0 0 0
da7p3 ONLINE 0 0 3
logs
mirror-1 ONLINE 0 0 0
ada1p1 ONLINE 0 0 0
ada2p1 ONLINE 0 0 0
errors: No known data errors
Raw
120 - messages
This is what I saw on Sunday:
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8d 90 c6 18 00 00 10 00 length 8192 SMID 774 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 70 00 00 20 00 length 16384 SMID 614 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 50 00 00 20 00 length 16384 SMID 792 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 08 00 00 20 00 length 16384 SMID 974 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b 6f ef 50 00 00 08 00 length 4096 SMID 674 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): WRITE(10). CDB: 2a 00 8b 0f a2 48 00 00 18 00 length 12288 SMID 177 terminated ioc 804b scsi 0 state c xfer 12288
Apr 24 11:25:55 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 ab 8f a1 38 00 00 08 00 length 4096 SMID 908 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 70 00 00 20 00 length 16384 SMID 376 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 50 00 00 20 00 length 16384 SMID 172 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 08 00 00 20 00 length 16384 SMID 127 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b 6f ef 50 00 00 08 00 length 4096 SMID 851 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 ab 8f a1 38 00 00 08 00 length 4096 SMID 489 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): WRITE(10). CDB: 2a 00 8b 0f a2 48 00 00 18 00 length 12288 SMID 412 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8d 90 c6 18 00 00 10 00 length 8192 SMID 867 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:56 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 d2 48 00 00 08 00 length 4096 SMID 291 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:57 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 d2 48 00 00 08 00 length 4096 SMID 320 terminated ioc 804b scsi 0 state c xfer 0
Apr 24 11:25:57 knew kernel: (da7:mps1:0:17:0): READ(10). CDB: 28 00 8b d9 97 50 00 00 20 00 length 16384 SMID 567 terminated ioc 804b scsi 0 state c xfer 0
Raw
121 - ada0
$ sudo smartctl -a /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA300
Serial Number: Z2T3BAXAS
LU WWN Device Id: 5 000039 ff4c187ba
Firmware Version: MX6OABB0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Apr 25 15:24:51 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (24373) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 407) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 72
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 87 (Average 95)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 88
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11221
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 48
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 110
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 110
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 15/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
121 - da7
$ sudo smartctl -a /dev/da7
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA300
Serial Number: 13Q8PNBYS
LU WWN Device Id: 5 000039 ff4c3f444
Firmware Version: MX6OABB0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 25 15:25:50 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22795) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 380) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 71
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 90 (Average 100)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 334
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 24164
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 53
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 353
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 353
194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 18/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 10% 17659 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
150 - zpool status
But the zpool status on Sunday was OK
$ zpool status
pool: system
state: ONLINE
scan: scrub in progress since Sun Apr 24 03:38:10 2016
3.44T scanned out of 18.7T at 53/s, (scan is slow, no estimated time)
0 repaired, 18.38% done
config:
NAME STATE READ WRITE CKSUM
system ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
da0p3 ONLINE 0 0 0
da1p3 ONLINE 0 0 0
da2p3 ONLINE 0 0 0
da3p3 ONLINE 0 0 0
da4p3 ONLINE 0 0 0
da5p3 ONLINE 0 0 0
ada0p3 ONLINE 0 0 0
da6p3 ONLINE 0 0 0
ada3p3 ONLINE 0 0 0
da7p3 ONLINE 0 0 0
logs
mirror-1 ONLINE 0 0 0
ada1p1 ONLINE 0 0 0
ada2p1 ONLINE 0 0 0
errors: No known data errors
pool: zoomzoom
state: ONLINE
scan: scrub repaired 0 in 0h1m with 0 errors on Thu Apr 21 03:33:30 2016
config:
NAME STATE READ WRITE CKSUM
zoomzoom ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
ada2p2 ONLINE 0 0 0
errors: No known data errors
Raw
200 - smartctl on da7
Sunday's smartctl
$ sudo smartctl -a /dev/da7
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.2-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA300
Serial Number: 13Q8PNBYS
LU WWN Device Id: 5 000039 ff4c3f444
Firmware Version: MX6OABB0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Apr 24 13:30:30 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22795) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 380) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 71
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 90 (Average 90)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 61
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 24147
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 50
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 64
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 64
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 18/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 10% 17659 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
999 - dmsg
$ cat /var/run/dmesg.boot
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE-p14 #0: Wed Mar 16 20:46:12 UTC 2016
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD Opteron(tm) Processor 6128 (2000.04-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f91 Family=0x10 Model=0x9 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 34359738368 (32768 MB)
avail memory = 33353277440 (31808 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <083112 APIC1535>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 17
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 19
cpu4 (AP): APIC ID: 20
cpu5 (AP): APIC ID: 21
cpu6 (AP): APIC ID: 22
cpu7 (AP): APIC ID: 23
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150515/tbfadt-644)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <Avago Technologies (LSI) SAS2008> port 0xa000-0xa0ff mem 0xfdb3c000-0xfdb3ffff,0xfdb40000-0xfdb7ffff irq 28 at device 0.0 on pci1
mps0: Firmware: 20.00.04.00, Driver: 20.00.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps1: <Avago Technologies (LSI) SAS2008> port 0xb000-0xb0ff mem 0xfdc3c000-0xfdc3ffff,0xfdc40000-0xfdc7ffff irq 44 at device 0.0 on pci2
mps1: Firmware: 15.00.00.00, Driver: 20.00.00.00-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xc800-0xc81f mem 0xfdde0000-0xfddfffff,0xfdddc000-0xfdddffff irq 48 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:25:90:82:21:5a
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xd800-0xd81f mem 0xfdee0000-0xfdefffff,0xfdedc000-0xfdedffff irq 47 at device 0.0 on pci4
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 00:25:90:82:21:5b
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f mem 0xfdaffc00-0xfdafffff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdafd000-0xfdafdfff irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdafe000-0xfdafefff irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdaff800-0xfdaff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdaf7000-0xfdaf7fff irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdafc000-0xfdafcfff irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdaff400-0xfdaff4ff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
sym0: <895> port 0xe000-0xe0ff mem 0xfebeec00-0xfebeecff,0xfebef000-0xfebeffff irq 22 at device 2.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfdffc000-0xfdffffff,0xfe000000-0xfe7fffff irq 20 at device 4.0 on pci5
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdaf6000-0xfdaf6fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xce7ff,0xce800-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen4.1: <ATI> at usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
mps0: _mapping_add_new_device: failed to add the device with handle 0x0009 to persistent table because there is no free space available
mps0: _mapping_add_new_device: failed to add the device with handle 0x000a to persistent table because there is no free space available
mps1: SAS Address for SATA device = 3c5a38247f9e65a7
mps1: SAS Address for SATA device = 3d573b2496967d7e
mps1: SAS Address for SATA device = 3c5b390980a16ba7
mps1: SAS Address for SATA device = 3c5b39068d846ba7
mps1: SAS Address for SATA device = 3c5b39098c9f6ba7
mps1: SAS Address for SATA device = 3c5b372b79ac6ba7
mps1: SAS Address for SATA device = 3c5a38289ba765a7
mps1: SAS Address for SATA device = 3c5b390980aa6ba7
mps1: SAS Address from SATA device = 3c5a38247f9e65a7
mps1: SAS Address from SATA device = 3d573b2496967d7e
mps1: SAS Address from SATA device = 3c5b390980a16ba7
mps1: SAS Address from SATA device = 3c5b39068d846ba7
mps1: SAS Address from SATA device = 3c5b39098c9f6ba7
mps1: SAS Address from SATA device = 3c5b372b79ac6ba7
mps1: SAS Address from SATA device = 3c5a38289ba765a7
mps1: SAS Address from SATA device = 3c5b390980aa6ba7
uhub5: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
ugen0.2: <American Power Conversion> at usbus0
(pass16:mps0:0:0:0): Duplicate Wired Device entry!
(pass16:mps0:0:0:0): Second device (pass device at scbus0 target 0 lun 1) will not be wired
(pass18:mps0:0:1:0): Duplicate Wired Device entry!
(pass18:mps0:0:1:0): Second device (pass device at scbus0 target 1 lun 1) will not be wired
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA DT01ACA300 MX6OABB0> ATA8-ACS SATA 3.x device
ada0: Serial Number Z2T3BAXAS
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <CT480BX200SSD1 MU01.4> ACS-2 ATA SATA 3.x device
ada1: Serial Number 1543F00F3587
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes)
ada1: Command Queueing enabled
ada1: 457862MB (937703088 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
ada2 at ata0 bus 0 scbus6 target 0 lun 0
ada2: <CT480BX200SSD1 MU01.4> ACS-2 ATA SATA 3.x device
ada2: Serial Number 1543F00F287F
ada2: 150.000MB/s transfers (SATA, UDMA6, PIO 1024bytes)
ada2: 457862MB (937703088 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad0
ada3 at ata0 bus 0 scbus6 target 1 lun 0
ada3: <TOSHIBA DT01ACA300 MX6OABB0> ATA8-ACS SATA 3.x device
ada3: Serial Number 13Q8PMAYS
ada3: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes)
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad1
sa1 at mps0 bus 0 scbus0 target 0 lun 0
sa1: <IBM ULT3580-HH4 C7Q1> Removable Sequential Access SCSI-3 device
sa1: Serial Number 1K10012996
sa1: 300.000MB/s transfers
sa1: Command Queueing enabled
sa2 at mps0 bus 0 scbus0 target 1 lun 0
sa2: <IBM ULT3580-HH4 C7Q1> Removable Sequential Access SCSI-3 device
sa2: Serial Number 9K11801866
sa2: 300.000MB/s transfers
sa2: Command Queueing enabled
sa0 at sym0 bus 0 scbus8 target 1 lun 0
sa0: <COMPAQ SuperDLT1 5F5F> Removable Sequential Access SCSI-2 device
sa0: Serial Number CXB37H0071
sa0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
ch0 at sym0 bus 0 scbus8 target 3 lun 0
ch0: <COMPAQ MSL5000 Series 0520> Removable Changer SCSI-2 device
ch0: Serial Number 3G22JJP38S46
ch0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
ch0: 25 slots, 1 drive, 1 picker, 1 portal
ch0: quirks=0x2<NO_DVCID>
da2 at mps1 bus 0 scbus1 target 11 lun 0
da2: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da3 at mps1 bus 0 scbus1 target 12 lun 0
da3: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number Z2U658VGS
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da2: Serial Number Z2U4W1XGS
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da7 at mps1 bus 0 scbus1 target 17 lun 0
da7: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da5 at mps1 bus 0 scbus1 target 14 lun 0
da5: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da7: Serial Number 13Q8PNBYS
da5: Serial Number Z2T5P7JAS
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da1 at mps1 bus 0 scbus1 target 10 lun 0
da4 at mps1 bus 0 scbus1 target 13 lun 0
da4: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da1: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number Z2U658MGS
da4: Serial Number Z2U65DKGS
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
ch1 at mps0 bus 0 scbus0 target 0 lun 1
ch1: <IBM 3573-TL B.60> Removable Changer SPC-3 SCSI device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
ch1: Serial Number 00X4U78G4272_LL0
ch1: 300.000MB/s transfers
ch2 at mps0 bus 0 scbus0 target 1 lun 1
ch1: Command Queueing enabled
ch1: 47 slots, 2 drives, 1 picker, 0 portals
da6 at mps1 bus 0 scbus1 target 16 lun 0
da6: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
ch2: <IBM 3573-TL B.60> Removable Changer SPC-3 SCSI device
ch2: Serial Number 00X4U78G4272_LL0
ch2: 300.000MB/s transfersda6: Serial Number Z2U62E0GS
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
ch2: Command Queueing enabled
ch2: 47 slots, 2 drives, 1 picker, 0 portals
da0 at mps1 bus 0 scbus1 target 2 lun 0
da0: <ATA TOSHIBA DT01ACA3 ABB0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number Z2T5TSSAS
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC" frequency 2000038735 Hz quality 800
GEOM_MIRROR: Cancelling unmapped because of ada3p2.
GEOM_MIRROR: Device mirror/swap launched (10/10).
Trying to mount root from zfs:system/rootfs []...
GEOM_ELI: Device mirror/swap.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
uhid0: <American Power Conversion Smart-UPS 1500 FWUPS 08.8 ID18, class 0/0, rev 2.00/1.06, addr 2> on usbus0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment