new 1TB & 250GB Samsung SSD 860 drives
| root@mfsbsd:~ # smartctl -a /dev/da3 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 1TB | |
| Serial Number: S59VNJ0N631973D | |
| LU WWN Device Id: 5 002538 e30670992 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:21:58 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 055 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 12093 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 5 - | |
| # 2 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| 256 0 65535 Read_scanning was never started | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # smartctl -a /dev/da2 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 1TB | |
| Serial Number: S59VNS0N809087J | |
| LU WWN Device Id: 5 002538 e30807c99 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:21:19 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 056 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 12699 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 5 - | |
| # 2 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| 256 0 65535 Read_scanning was never started | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # smartctl -a /dev/da5 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 1TB | |
| Serial Number: S5B3NDFN807386P | |
| LU WWN Device Id: 5 002538 ed08d73e7 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:22:50 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 056 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 13120 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 5 - | |
| # 2 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # smartctl -a /dev/da4 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 1TB | |
| Serial Number: S5B3NDFN807383E | |
| LU WWN Device Id: 5 002538 ed08d73e4 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:22:17 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 056 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 13053 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 5 - | |
| # 2 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # smartctl -a /dev/da1 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 250GB | |
| Serial Number: S5B4NMFN804278V | |
| LU WWN Device Id: 5 002538 ed08d8677 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 250,059,350,016 bytes [250 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:19:21 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 055 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 5 - | |
| # 2 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # smartctl -a /dev/da0 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.1-RELEASE amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 250GB | |
| Serial Number: S5B4NMFN804351W | |
| LU WWN Device Id: 5 002538 ed08d86c0 | |
| Firmware Version: RVT04B6Q | |
| User Capacity: 250,059,350,016 bytes [250 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Oct 11 00:20:37 2020 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 5 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 9 | |
| 177 Wear_Leveling_Count 0x0013 100 100 000 Pre-fail Always - 0 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 064 056 000 Old_age Always - 36 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1 | |
| 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 3 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| root@mfsbsd:~ # |
| root@mfsbsd:~ # time zpool create data01 \ | |
| mirror /dev/gpt/S59VNS0N809087J_S00 /dev/gpt/S59VNJ0N631973D_S01 \ | |
| mirror /dev/gpt/S5B3NDFN807383E_S02 /dev/gpt/S5B3NDFN807386P_S03 | |
| 0.000u 0.027s 0:07.30 0.2% 56+144k 128+0io 0pf+0w |
| root@mfsbsd:~ # zpool scrub data01 | |
| root@mfsbsd:~ # zpool status | |
| pool: data01 | |
| state: ONLINE | |
| scan: scrub repaired 0 in 0 days 00:00:00 with 0 errors on Sun Oct 11 00:23:26 2020 | |
| config: | |
| NAME STATE READ WRITE CKSUM | |
| data01 ONLINE 0 0 0 | |
| mirror-0 ONLINE 0 0 0 | |
| gpt/S59VNS0N809087J_S00 ONLINE 0 0 0 | |
| gpt/S59VNJ0N631973D_S01 ONLINE 0 0 0 | |
| mirror-1 ONLINE 0 0 0 | |
| gpt/S5B3NDFN807383E_S02 ONLINE 0 0 0 | |
| gpt/S5B3NDFN807386P_S03 ONLINE 0 0 0 | |
| errors: No known data errors | |
| root@mfsbsd:~ # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment