Created
February 15, 2019 02:20
-
-
Save dlangille/edbf98187fdf3a339451bc8ac77833cd to your computer and use it in GitHub Desktop.
The slow scrub returns
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ zpool status system | |
| pool: system | |
| state: ONLINE | |
| scan: scrub in progress since Thu Feb 14 03:43:34 2019 | |
| 1.80T scanned at 23.3M/s, 1.44T issued at 18.6M/s, 6.10T total | |
| 0 repaired, 23.65% done, 3 days 00:51:32 to go | |
| config: | |
| NAME STATE READ WRITE CKSUM | |
| system ONLINE 0 0 0 | |
| raidz2-0 ONLINE 0 0 0 | |
| da3p3 ONLINE 0 0 0 | |
| da1p3 ONLINE 0 0 0 | |
| da6p3 ONLINE 0 0 0 | |
| gpt/57NGK1Z9F57D ONLINE 0 0 0 | |
| da2p3 ONLINE 0 0 0 | |
| da5p3 ONLINE 0 0 0 | |
| errors: No known data errors | |
| $ grep 57NGK1Z9F57D /var/log/messages | |
| Feb 13 15:41:48 slocum kernel: da4: Serial Number 57NGK1Z9F57D | |
| therefore, this is da1..da6 inclusive |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da1 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba X300 | |
| Device Model: TOSHIBA HDWE150 | |
| Serial Number: 4725K6DVF57D | |
| LU WWN Device Id: 5 000039 7bb900240 | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:16:58 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x85) Offline data collection activity | |
| was aborted by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 542) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8908 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 30 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 066 066 000 Old_age Always - 13927 | |
| 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 30 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 39 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 29 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 39 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 38 (Min/Max 7/64) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 066 066 000 Old_age Always - 13902 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 564 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 13687 - | |
| # 2 Short offline Completed without error 00% 13663 - | |
| # 3 Short offline Completed without error 00% 13653 - | |
| # 4 Short offline Completed without error 00% 13639 - | |
| # 5 Extended offline Interrupted (host reset) 80% 13632 - | |
| # 6 Short offline Completed without error 00% 13618 - | |
| # 7 Short offline Completed without error 00% 13594 - | |
| # 8 Short offline Completed without error 00% 13570 - | |
| # 9 Short offline Completed without error 00% 13546 - | |
| #10 Short offline Completed without error 00% 13522 - | |
| #11 Short offline Completed without error 00% 13498 - | |
| #12 Short offline Completed without error 00% 13474 - | |
| #13 Short offline Completed without error 00% 13450 - | |
| #14 Short offline Completed without error 00% 13426 - | |
| #15 Short offline Completed without error 00% 13402 - | |
| #16 Short offline Completed without error 00% 13378 - | |
| #17 Short offline Completed without error 00% 13354 - | |
| #18 Short offline Completed without error 00% 13330 - | |
| #19 Short offline Completed without error 00% 13306 - | |
| #20 Short offline Completed without error 00% 13282 - | |
| #21 Extended offline Completed without error 00% 13275 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da2 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba X300 | |
| Device Model: TOSHIBA HDWE150 | |
| Serial Number: 4725K6ECF57D | |
| LU WWN Device Id: 5 000039 7bb90031c | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:19:10 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 546) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8726 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 29 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 14001 | |
| 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 59 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 27 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 62 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 47 (Min/Max 7/64) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 066 066 000 Old_age Always - 13925 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 571 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 13762 - | |
| # 2 Short offline Completed without error 00% 13739 - | |
| # 3 Short offline Completed without error 00% 13738 - | |
| # 4 Extended offline Completed without error 00% 13735 - | |
| # 5 Short offline Completed without error 00% 13714 - | |
| # 6 Short offline Completed without error 00% 13693 - | |
| # 7 Short offline Completed without error 00% 13669 - | |
| # 8 Short offline Completed without error 00% 13645 - | |
| # 9 Short offline Completed without error 00% 13621 - | |
| #10 Short offline Completed without error 00% 13597 - | |
| #11 Short offline Completed without error 00% 13573 - | |
| #12 Short offline Completed without error 00% 13549 - | |
| #13 Short offline Completed without error 00% 13525 - | |
| #14 Short offline Completed without error 00% 13501 - | |
| #15 Short offline Completed without error 00% 13477 - | |
| #16 Short offline Completed without error 00% 13453 - | |
| #17 Short offline Completed without error 00% 13429 - | |
| #18 Short offline Completed without error 00% 13405 - | |
| #19 Short offline Completed without error 00% 13381 - | |
| #20 Extended offline Completed without error 00% 13375 - | |
| #21 Short offline Completed without error 00% 13357 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da3 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba 3.5" MD04ACA... Enterprise HDD | |
| Device Model: TOSHIBA MD04ACA500 | |
| Serial Number: 653BK12IFS9A | |
| LU WWN Device Id: 5 000039 65bc0017c | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:18:42 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x85) Offline data collection activity | |
| was aborted by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 547) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 9473 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 56 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 22546 | |
| 10 Spin_Retry_Count 0x0033 101 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 327 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 48 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 530 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 44 (Min/Max 7/60) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 044 044 000 Old_age Always - 22432 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 215 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 22312 - | |
| # 2 Short offline Completed without error 00% 22283 - | |
| # 3 Short offline Completed without error 00% 22272 - | |
| # 4 Short offline Completed without error 00% 22260 - | |
| # 5 Short offline Completed without error 00% 22239 - | |
| # 6 Short offline Completed without error 00% 22215 - | |
| # 7 Short offline Completed without error 00% 22191 - | |
| # 8 Short offline Completed without error 00% 22167 - | |
| # 9 Short offline Completed without error 00% 22143 - | |
| #10 Short offline Completed without error 00% 22119 - | |
| #11 Short offline Completed without error 00% 22095 - | |
| #12 Short offline Completed without error 00% 22071 - | |
| #13 Short offline Completed without error 00% 22047 - | |
| #14 Short offline Completed without error 00% 22023 - | |
| #15 Short offline Completed without error 00% 21999 - | |
| #16 Short offline Completed without error 00% 21975 - | |
| #17 Extended offline Completed without error 00% 21967 - | |
| #18 Short offline Completed without error 00% 21951 - | |
| #19 Short offline Completed without error 00% 21927 - | |
| #20 Short offline Completed without error 00% 21903 - | |
| #21 Short offline Completed without error 00% 21879 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da4 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba X300 | |
| Device Model: TOSHIBA HDWE150 | |
| Serial Number: 57NGK1Z9F57D | |
| LU WWN Device Id: 5 000039 7cbe83a5e | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:19:25 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 560) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8765 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 352 | |
| 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 18/42) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 283 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 540 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 103 - | |
| # 2 Extended offline Completed without error 00% 102 - | |
| # 3 Extended offline Completed without error 00% 61 - | |
| # 4 Extended offline Completed without error 00% 32 - | |
| # 5 Extended offline Completed without error 00% 8 - | |
| # 6 Short offline Completed without error 00% 0 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da5 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba 3.5" MD04ACA... Enterprise HDD | |
| Device Model: TOSHIBA MD04ACA500 | |
| Serial Number: 653DK7WBFS9A | |
| LU WWN Device Id: 5 000039 65bd0049c | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:19:43 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x85) Offline data collection activity | |
| was aborted by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 548) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 9165 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 51 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 22793 | |
| 10 Spin_Retry_Count 0x0033 101 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 27 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 41 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5402 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 9/62) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 047 047 000 Old_age Always - 21437 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 202 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 22583 - | |
| # 2 Short offline Completed without error 00% 22555 - | |
| # 3 Short offline Completed without error 00% 22531 - | |
| # 4 Short offline Completed without error 00% 22519 - | |
| # 5 Short offline Completed without error 00% 22508 - | |
| # 6 Extended offline Completed without error 00% 22490 - | |
| # 7 Short offline Completed without error 00% 22458 - | |
| # 8 Short offline Completed without error 00% 22434 - | |
| # 9 Short offline Completed without error 00% 22410 - | |
| #10 Short offline Completed without error 00% 22386 - | |
| #11 Short offline Completed without error 00% 22362 - | |
| #12 Short offline Completed without error 00% 22338 - | |
| #13 Short offline Completed without error 00% 22314 - | |
| #14 Short offline Completed without error 00% 22290 - | |
| #15 Short offline Completed without error 00% 22266 - | |
| #16 Short offline Completed without error 00% 22242 - | |
| #17 Short offline Completed without error 00% 22218 - | |
| #18 Short offline Completed without error 00% 22194 - | |
| #19 Short offline Completed without error 00% 22170 - | |
| #20 Short offline Completed without error 00% 22146 - | |
| #21 Short offline Completed without error 00% 22122 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [dan@slocum:~] $ sudo smartctl -a /dev/da6 | |
| smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p3 amd64] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Toshiba 3.5" MD04ACA... Enterprise HDD | |
| Device Model: TOSHIBA MD04ACA500 | |
| Serial Number: 652FK58FFS9A | |
| LU WWN Device Id: 5 000039 65be000ee | |
| Firmware Version: FP2A | |
| User Capacity: 5,000,981,078,016 bytes [5.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS (minor revision not indicated) | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Fri Feb 15 02:19:58 2019 UTC | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 545) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8861 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 58 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 48 | |
| 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
| 9 Power_On_Hours 0x0032 044 044 000 Old_age Always - 22770 | |
| 10 Spin_Retry_Count 0x0033 101 100 030 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 58 | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 651 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 51 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 790 | |
| 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 43 (Min/Max 9/62) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 | |
| 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 | |
| 222 Loaded_Hours 0x0032 044 044 000 Old_age Always - 22540 | |
| 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
| 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 208 | |
| 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 22534 - | |
| # 2 Short offline Completed without error 00% 22510 - | |
| # 3 Short offline Completed without error 00% 22496 - | |
| # 4 Short offline Completed without error 00% 22486 - | |
| # 5 Short offline Completed without error 00% 22462 - | |
| # 6 Short offline Completed without error 00% 22438 - | |
| # 7 Short offline Completed without error 00% 22414 - | |
| # 8 Short offline Completed without error 00% 22390 - | |
| # 9 Short offline Completed without error 00% 22366 - | |
| #10 Short offline Completed without error 00% 22342 - | |
| #11 Short offline Completed without error 00% 22318 - | |
| #12 Short offline Completed without error 00% 22294 - | |
| #13 Short offline Completed without error 00% 22270 - | |
| #14 Short offline Completed without error 00% 22246 - | |
| #15 Short offline Completed without error 00% 22222 - | |
| #16 Short offline Completed without error 00% 22198 - | |
| #17 Short offline Completed without error 00% 22174 - | |
| #18 Extended offline Completed without error 00% 22166 - | |
| #19 Short offline Completed without error 00% 22150 - | |
| #20 Short offline Completed without error 00% 22126 - | |
| #21 Short offline Completed without error 00% 22102 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| [dan@slocum:~] $ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
This is the drive which was removed via 'zpool replace'.