Board test 07.05.2016

openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.armv7l-2016.05.05-Build1.2.raw.xz.md

scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Scanning mmc 0:2...
Found U-Boot script /boot.scr
2837 bytes read in 43 ms (63.5 KiB/s)
## Executing script at 02000000
switch to partitions #0, OK
mmc0 is current device
5352616 bytes read in 847 ms (6 MiB/s)
48607286 bytes read in 6963 ms (6.7 MiB/s)
14755 bytes read in 125 ms (115.2 KiB/s)
Kernel image @ 0x1000000 [ 0x000000 - 0x51aca8 ]
## Loading init Ramdisk from Legacy Image at 02100000 ...
   Image Name:   Initrd
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    48607222 Bytes = 46.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 00000100
   Booting using the fdt blob at 0x000100
   Using Device Tree in place at 00000100, end 00006aa2

Starting kernel ...

sR~7Z9BiV9Bh+

penSUSE-Tumbleweed-ARM-JeOS-pine64.aarch64-2016.05.05-Build4.2.raw.xz.md

Loading linux.vmx...
Loading initrd.vmx...
EFI stub: Booting Linux Kernel...
EFI stub: UEFI Secure Boot is enabled.
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
U-Boot EFI: Relocation at 000000007ffacff0 is out of range (1fffc1d0)
U-Boot EFI: Relocation at 000000007ffad000 is out of range (1fffc1e8)
U-Boot EFI: Relocation at 000000007ffad010 is out of range (1fffc1e8)
U-Boot EFI: Relocation at 000000007ffad020 is out of range (1fffc058)
[    0.320627] dmi: Firmware registration failed.
[    9.784479] rtc-efi rtc-efi: can't read time
[    9.835694] rtc-efi rtc-efi: can't read time
[    9.839978] rtc-efi rtc-efi: hctosys: unable to read the hardware clock