Skip to content

Instantly share code, notes, and snippets.

@dmc-at-work

dmc-at-work/govtech-sgcore-experiments-internal-playbook-scheduling-v1-1.yml

Last active April 10, 2018 08:33
Show Gist options
  • Save dmc-at-work/7dddb363d0890c9baab9d85628a4a369 to your computer and use it in GitHub Desktop.
Save dmc-at-work/7dddb363d0890c9baab9d85628a4a369 to your computer and use it in GitHub Desktop.
Download ZIP
GovTech - SGCore - Experiments - Request: Internal Playbook Scheduling - v1
Raw
govtech-sgcore-experiments-internal-playbook-scheduling-v1-1.yml
# govtech-sgcore-experiments-internal-playbook-scheduling-v1-1.yml
# 2018 04 04
# 2018 04 05
# 2018 04 06
# 2018 04 10
# DMC
# To Run:
# $ ansible-playbook govtech-sgcore-experiments-internal-playbook-scheduling-v1-1.yml
---
- name: govtech-sgcore-experiments-internal-playbook-scheduling-v1
hosts: localhost
vars:
time_am_min: 0
time_am_max: 600
time_pm_min: 2000
time_pm_max: 2359
# Use this if timing list iteration needed
time_run_cycle:
- 2030
- 2100
- 2130
- 2200
- 2230
- 2300
- 2330
- 0
- 30
- 100
- 130
- 200
- 230
- 300
- 330
- 400
- 430
- 500
- 530
- 600
##### For discussed logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
# implem_retries: 20
# implem_delay: 1800
##### For Dev/Testing
implem_retries: 10
implem_delay: 3
tasks:
- name:
Get timestamp from the system - Format - HHMM
shell:
"date +%H%M"
register:
tstamp_HHMM
- name:
Set variables
set_fact:
##### For discussed production logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
cur_time_HHMM: "{{ tstamp_HHMM.stdout }}"
##### For Dev/Testing
# cur_time_HHMM: 1900
# cur_time_HHMM: 2000
# cur_time_HHMM: 2100
# cur_time_HHMM: 0
# cur_time_HHMM: 100
# cur_time_HHMM: 600
# cur_time_HHMM: 601
- name: System timestamp - HHMM
debug:
msg: "Current HHMM: {{ cur_time_HHMM }}"
####################
##### Variation #1
####################
- name:
"Hello With Condition"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "HELLO!!!!!!!!!!!!!!!!!!!!"
register:
shell_echo_result
when:
# If outside conditions
# "shell_echo_result.stdout": "VARIABLE IS NOT DEFINED!"
# Or further handling
(cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
- name: Variation \#1 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
- name: Test Echo End
debug:
msg: "END OF THE LINE. THANK YOU."
...
Raw
govtech-sgcore-experiments-internal-playbook-scheduling-v1-2.yml
# govtech-sgcore-experiments-internal-playbook-scheduling-v1-2.yml
# 2018 04 04
# 2018 04 05
# 2018 04 06
# 2018 04 10
# DMC
# To Run:
# $ ansible-playbook govtech-sgcore-experiments-internal-playbook-scheduling-v1-2.yml
---
- name: govtech-sgcore-experiments-internal-playbook-scheduling-v1
hosts: localhost
vars:
time_am_min: 0
time_am_max: 600
time_pm_min: 2000
time_pm_max: 2359
# Use this if timing list iteration needed
time_run_cycle:
- 2030
- 2100
- 2130
- 2200
- 2230
- 2300
- 2330
- 0
- 30
- 100
- 130
- 200
- 230
- 300
- 350
- 400
- 430
- 500
- 530
- 600
##### For discussed logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
# implem_retries: 20
# implem_delay: 1800
##### For Dev/Testing
implem_retries: 10
implem_delay: 3
tasks:
- name:
Get timestamp from the system - Format - HHMM
shell:
"date +%H%M"
register:
tstamp_HHMM
- name:
Set variables
set_fact:
##### For discussed production logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
cur_time_HHMM: "{{ tstamp_HHMM.stdout }}"
##### For Dev/Testing
# cur_time_HHMM: 1900
# cur_time_HHMM: 2000
# cur_time_HHMM: 2100
# cur_time_HHMM: 0
# cur_time_HHMM: 100
# cur_time_HHMM: 600
# cur_time_HHMM: 601
- name: System timestamp - HHMM
debug:
msg: "Current HHMM: {{ cur_time_HHMM }}"
####################
##### Variation #2
####################
- name:
"Hello Retries"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "Again And Again"
# create/update some boolean to use as exit flag, if needed.
register:
shell_echo_result
until:
# replace below with a boolean variable that
# is updated after successful run
# - shell_echo_result.stdout == "blahblahblah"
- (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
retries: "{{ implem_retries }}"
delay: "{{ implem_delay }}" # seconds
ignore_errors: yes
# Uncomment below if you need
# to end playbook run here.
# Tasks below, not executed
# - meta: end_play
# when: (optional condition)
- name: Variation \#2 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
- name: Test Echo End
debug:
msg: "END OF THE LINE. THANK YOU."
...
Raw
govtech-sgcore-experiments-internal-playbook-scheduling-v1-3.yml
# govtech-sgcore-experiments-internal-playbook-scheduling-v1-3.yml
# 2018 04 04
# 2018 04 05
# 2018 04 06
# 2018 04 10
# DMC
# To Run:
# $ ansible-playbook govtech-sgcore-experiments-internal-playbook-scheduling-v1-3.yml
---
- name: govtech-sgcore-experiments-internal-playbook-scheduling-v1
hosts: localhost
vars:
time_am_min: 0
time_am_max: 600
time_pm_min: 2000
time_pm_max: 2359
# Use this if timing list iteration needed
time_run_cycle:
- 2030
- 2100
- 2130
- 2200
- 2230
- 2300
- 2330
- 0
- 30
- 100
- 130
- 200
- 230
- 300
- 330
- 400
- 430
- 500
- 530
- 600
##### For discussed logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
# implem_retries: 20
# implem_delay: 1800
##### For Dev/Testing
implem_retries: 10
implem_delay: 3
tasks:
- name:
Get timestamp from the system - Format - HHMM
shell:
"date +%H%M"
register:
tstamp_HHMM
- name:
Set variables
set_fact:
##### For discussed production logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
cur_time_HHMM: "{{ tstamp_HHMM.stdout }}"
##### For Dev/Testing
# cur_time_HHMM: 1900
# cur_time_HHMM: 2000
# cur_time_HHMM: 2100
# cur_time_HHMM: 0
# cur_time_HHMM: 100
# cur_time_HHMM: 600
# cur_time_HHMM: 601
- name: System timestamp - HHMM
debug:
msg: "Current HHMM: {{ cur_time_HHMM }}"
####################
##### Variation #3
####################
- block:
- name:
"Hello Retries In Block"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "Again And Again And Again And Again In Block"
# create some boolean to use as exit flag
register:
shell_echo_result
until:
# replace below with a boolean variable that
# is updated after successful run
# - shell_echo_result.stdout == "blahblahblah"
- (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
retries: "{{ implem_retries }}"
delay: "{{ implem_delay }}" # seconds
ignore_errors: yes
# Uncomment below if you need
# to end playbook run here.
# Tasks below, not executed
# - meta: end_play
# when:
# (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
# or
# (cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
- name: Variation \#3 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
- name: Test Echo End
debug:
msg: "END OF THE LINE. THANK YOU."
...
Raw
govtech-sgcore-experiments-internal-playbook-scheduling-v1.yml
# govtech-sgcore-experiments-internal-playbook-scheduling-v1.yml
# 2018 04 04
# 2018 04 05
# 2018 04 06
# 2018 04 10
# DMC
# To Run:
# $ ansible-playbook govtech-sgcore-experiments-internal-playbook-scheduling-v1.yml
---
- name: govtech-sgcore-experiments-interal-playbook-scheduling-v1
hosts: localhost
vars:
time_am_min: 0
time_am_max: 600
time_pm_min: 2000
time_pm_max: 2359
# Use this if timing list iteration needed
time_run_cycle:
- 2030
- 2100
- 2130
- 2200
- 2230
- 2300
- 2330
- 0
- 30
- 100
- 130
- 200
- 230
- 300
- 350
- 400
- 430
- 500
- 530
- 600
##### For discussed logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
# implem_retries: 20
# implem_delay: 1800
##### For Dev/Testing
implem_retries: 10
implem_delay: 3
tasks:
- name:
Get timestamp from the system - Format - HHMM
shell:
"date +%H%M"
register:
tstamp_HHMM
- name:
Set variables
set_fact:
##### For discussed production logic
# from time_pm_min to time_pm_max
# and
# from time_am_min to time_am_max
cur_time_HHMM: "{{ tstamp_HHMM.stdout }}"
##### For Dev/Testing
# cur_time_HHMM: 1900
# cur_time_HHMM: 2000
# cur_time_HHMM: 2100
# cur_time_HHMM: 0
# cur_time_HHMM: 100
# cur_time_HHMM: 600
# cur_time_HHMM: 601
- name: System timestamp - HHMM
debug:
msg: "Current HHMM: {{ cur_time_HHMM }}"
####################
##### Variation #1
####################
- name:
"Hello With Condition"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "HELLO!!!!!!!!!!!!!!!!!!!!"
register:
shell_echo_result
when:
# If outside conditions
# "shell_echo_result.stdout": "VARIABLE IS NOT DEFINED!"
# Or further handling
(cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
- name: Variation \#1 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
####################
##### Variation #2
####################
- name:
"Hello Retries"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "Again And Again"
# create/update some boolean to use as exit flag, if needed.
register:
shell_echo_result
until:
# replace below with a boolean variable that
# is updated after successful run
# - shell_echo_result.stdout == "blahblahblah"
- (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
retries: "{{ implem_retries }}"
delay: "{{ implem_delay }}" # seconds
ignore_errors: yes
# Uncomment below if you need
# to end playbook run here.
# Tasks below, not executed
# - meta: end_play
# when: (optional condition)
- name: Variation \#2 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
####################
##### Variation #3
####################
- block:
- name:
"Hello Retries In Block"
shell:
# do something
# command: /sbin/shutdown -t now
# Check defer run to later
echo "Again And Again And Again And Again In Block"
# create some boolean to use as exit flag
register:
shell_echo_result
until:
# replace below with a boolean variable that
# is updated after successful run
# - shell_echo_result.stdout == "blahblahblah"
- (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
or
(cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
retries: "{{ implem_retries }}"
delay: "{{ implem_delay }}" # seconds
ignore_errors: yes
# Uncomment below if you need
# to end playbook run here.
# Tasks below, not executed
# - meta: end_play
# when:
# (cur_time_HHMM >= time_pm_min and cur_time_HHMM <= time_pm_max)
# or
# (cur_time_HHMM >= time_am_min and cur_time_HHMM <= time_am_max)
- name: Variation \#3 Test Echo Result
debug:
# var: shell_echo_result.stdout_lines
var: shell_echo_result.stdout
- name: Test Echo End
debug:
msg: "END OF THE LINE. THANK YOU."
...
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment