Skip to content

Instantly share code, notes, and snippets.

@dmesser

dmesser/standalone-kubelet-rpi.md

Last active March 5, 2023 13:11
Show Gist options
  • Star 2 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save dmesser/b110d717b372e36607b3fb75b52ab0ca to your computer and use it in GitHub Desktop.
Save dmesser/b110d717b372e36607b3fb75b52ab0ca to your computer and use it in GitHub Desktop.
Download ZIP
Raw
standalone-kubelet-rpi.md

Warning

The below currently does not work on Raspbian Buster Lite (Debian 10). The kernel has been compiled without CONFIG_CFS_BANDWIDTH and pods will fail to spawn due to runc trying to write into cpu.cfs_period_us in the cgroup of the pod. This file does not exist and trying to create it yields permission denied.

Example:

open /sys/fs/cgroup/cpu,cpuacct/kubepods.slice/kubepods-besteffort.slice/kubepods-besteffort-pod3a1fe9eafc113856b2d4d409800ef99f.slice/crio-211c0bcc45f43e085415cff3736e38a552ee92657d879d4235f02a7d4dee097f.scope/cpu.cfs_period_us: permission denied

What is this about?

This gist describes a possible IoT/Edge computing setup using Kubernetes-style declarative management. It utilizes standalone kubelet + CRI-O + CNI on a Raspberry Pi running Raspbian 10 (Debian Buster). The goal is to place a Kubernetes Pod manifest on an single node and access the application from the network.

Prepare the system

apt-get update && apt-get -y upgrade && reboot
apt-get install -y software-properties-common

Prepare the system for CRI-O

Add the Project Atomic PPA manually since there is no distribution template for Debian Buster yet

cat > /etc/apt/sources.list.d/projectatomics.list <<EOF
deb http://ppa.launchpad.net/projectatomic/ppa/ubuntu xenial main
deb-src http://ppa.launchpad.net/projectatomic/ppa/ubuntu xenial main
EOF

Add the public keys of Ubuntu Launchpad and load the index:

apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 8BECF1637AD8C79D
apt-get update

Load the required kernel modules for CRI-O

modprobe overlay
modprobe br_netfilter

Enable auto-loading of required kernel modules and configure kernel tunables to allow

cat > /etc/modules-load.d/crio.conf <<EOF
overlay
br_netfilter
EOF

cat > /etc/sysctl.d/99-kubernetes-cri.conf <<EOF
net.bridge.bridge-nf-call-iptables  = 1
net.ipv4.ip_forward                 = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF

Eventually, apply the kernel tunables:

sysctl --system

Install and configure CRI-O

Install CRI-O

apt-get -y install cri-o-1.15

Update crio.conf to point to conmon in the correct location:

@@ -88,7 +88,7 @@
 no_pivot = false

 # Path to the conmon binary, used for monitoring the OCI runtime.
-conmon = "/usr/libexec/crio/conmon"
+conmon = "/usr/bin/conmon"

 # Environment variable list for the conmon process, used for passing necessary
 # environment variables to conmon or the runtime.

Add registries to the CRI-O configuration:

@@ -255,11 +255,10 @@
# compatibility reasons. Depending on your workload and usecase you may add more
# registries (e.g., "quay.io", "registry.fedoraproject.org",
# "registry.opensuse.org", etc.).
-registries = [
- 	"quay.io",
-	  "docker.io",
-   "registry.access.redhat.com"
-]
+#registries = [
+# 	"quay.io",
+#	"docker.io",
+#]

Install crictl from GitHub releases:

curl -Ls https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.17.0/crictl-v1.17.0-linux-arm.tar.gz | tar xvz
mv crictl /usr/sbin/

Configure CNI

Delete the default CNI config:

rm /etc/cni/net.d/*.conf

Place the following file into /etc/cni/net.d/100-crio-bridge.conflist

{
  "cniVersion": "0.3.1",
  "name": "bridge-firewalld",
  "plugins": [
    {
      "type": "bridge",
      "bridge": "cni0",
      "isDefaultGateway": true,
      "isGateway": true,
      "ipMasq": true,
      "ipam": {
        "type": "host-local",
        "subnet": "10.88.0.0/16",
        "routes": [
          {
            "dst": "0.0.0.0/0"
          }
        ]
      }
    },
    { 
      "type": "portmap",
      "capabilities": {
	"portMappings": true
     }
    }
  ]
}

The above configuration will cause CNI to create Linux bridge cni0 and attach veth-pairs between the host and the container. The containers will receive IPs in the 10.88.0.0/16 in the process. The bridge will act as gateway and IP masquerading will be configured to allow containers to networks external to the host (e.g. internet). Portmapping and firewalld rule manipulation will be conducted.

Install Standalone kubelet

Install the signing keys for the Kubernetes repository

apt install curl -y && curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add -

Enable the Kubernetes repository as a source in /etc/apt/sources.list.d/kubernetes.list

deb https://apt.kubernetes.io/ kubernetes-xenial main

Eventually, install the kubelet

apt-get update && apt-get -y install kubelet

The kubelet systemd service will start immediately but fail, since it has not default config. This will be done in the next step.

Configure Standalone Kubelet

Create the following /etc/default/kubelet in order to:

  • use systemd to manage cgroups
  • not fail on swap space enabled
  • enable static pod manifests stored on disk
  • enable the use of runc through CRIO as the container runtime (details)
KUBELET_EXTRA_ARGS=--cgroup-driver=systemd --fail-swap-on=false --pod-manifest-path=/etc/kubernetes/manifests --container-runtime=remote --container-runtime-endpoint=unix:///var/run/crio/crio.sock --runtime-request-timeout=10m

Create the pod manifest directory:

mkdir -p /etc/kubernetes/manifests

Copy the default systemd unit file for the kubelet in the designated drop-in location:

cp /lib/systemd/system/kubelet.service /etc/systemd/system/kubelet.service

Modify /etc/systemd/system/kubelet.service as follows:

@@ -1,9 +1,12 @@
 [Unit]
 Description=kubelet: The Kubernetes Node Agent
 Documentation=https://kubernetes.io/docs/home/
+After=crio.service
+Requires=crio.service

 [Service]
-ExecStart=/usr/bin/kubelet
+EnvironmentFile=/etc/default/kubelet
+ExecStart=/usr/bin/kubelet $KUBELET_EXTRA_ARGS
 Restart=always
 StartLimitInterval=0
 RestartSec=10

This add CRI-O as a start-up dependency for the kubelet and reads the KUBELET_EXTRA_ARGS environment variable from /etc/default/kubelet.

Reload systemd:

systemctl daemon-reload

And start the kubelet:

systemctl start kubelet

Verify the kubelet status

systemctl status kubelet

Verify the status of CRI-O

systemctl status crio

Verify that both the runtime and CNI are ready:

crictl info

You should see the following:

{
  "status": {
    "conditions": [
      {
        "type": "RuntimeReady",
        "status": true,
        "reason": "",
        "message": ""
      },
      {
        "type": "NetworkReady",
        "status": true,
        "reason": "",
        "message": ""
      }
    ]
  }
}

When succcessful, place the following example pod manifest in /etc/kubernetes/manifests/echoserver.yaml

apiVersion: v1
kind: Pod
metadata:
  name: echoserver
spec:
  containers:
    - name: echoserver
      image: gcr.io/google-containers/echoserver:1.10
      ports:
        - name: web
          containerPort: 8080
          hostPort: 9091
          protocol: TCP
      resources:
        limits:
          cpu: "100m"
          memory: "50Mi"

Verify that the pod is running:

crictl ps -o table

You should the pod running:

CONTAINER           IMAGE                                                              CREATED             STATE               NAME                ATTEMPT             POD ID
99cb17ca96800       365ec60129c5426b4cf160257c06f6ad062c709e0576c8b3d9a5dcc488f5252d   11 minutes ago      Running             echoserver          2                   adfbfd4a31754

You should see the IP address of the container/pod in the source list of the trusted zone:

trusted (active)
  target: ACCEPT
  icmp-block-inversion: no
  interfaces: 
  sources: 10.88.0.18/32
  services: 
  ports: 
  protocols: 
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules:

You should be able to curl the container on its container port:

curl http://10.88.0.18:8080

You should also be able to curl the container on its host port from another system:

curl http://<host-ip>:9091

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment