Skip to content

Instantly share code, notes, and snippets.

@dmikushin
Created January 7, 2020 16:00
Show Gist options
  • Save dmikushin/10bdc259f3bd7f6485861d5cd6183c9c to your computer and use it in GitHub Desktop.
Save dmikushin/10bdc259f3bd7f6485861d5cd6183c9c to your computer and use it in GitHub Desktop.
NanoPI M4 full log
Welcome to minicom 2.7.1
OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB0, 16:52:51
Press CTRL-A Z for help on special keys
DDR Version 1.15 20181010
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x32817281, stride = 0x9
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 214
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=7456MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67761
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x913a4
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):4f4079b
NOTICE: BL31: Built : 17:40:23, Oct 11 2018
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2018.07-rk3399 (Oct 23 2018 - 14:35:46 -0300)
Model: FriendlyElec NanoPC-T4
DRAM: 2 GiB
MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
Failed (-5)
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: FriendlyElec NanoPC-T4
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:
Error: ethernet@fe300000 address not set.
eth-1: ethernet@fe300000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1050 bytes read in 13 ms (78.1 KiB/s)
## Executing script at 00500000
26055168 bytes read in 2756 ms (9 MiB/s)
55973 bytes read in 22 ms (2.4 MiB/s)
468168768 bytes read in 49411 ms (9 MiB/s)
## Loading init Ramdisk from Legacy Image at 04000000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 468168704 Bytes = 446.5 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to 6209c000, end 7df17000 ... OK
Loading Device Tree to 000000006208b000, end 000000006209baa4 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.8 (alex@svn) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 S0
[ 0.000000] Machine model: FriendlyElec NanoPi M4
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x000000005e000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fbae800-0x7fbaffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0 systemd.journald.for1
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1505600K/2095104K available (12156K kernel code, 1828K rwdata, 6376K rodata, 4992K init, 450K bss, 523968K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7f480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x000000007f440000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007f450000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.003933] Console: colour dummy device 80x25
[ 0.005324] printk: console [tty0] enabled
[ 0.005517] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.005576] pid_max: default: 32768 minimum: 301
[ 0.005793] LSM: Security Framework initializing
[ 0.005949] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.006010] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.032045] ASID allocator initialised with 32768 entries
[ 0.040044] rcu: Hierarchical SRCU implementation.
[ 0.048238] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.048777] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.056821] EFI services will not be available.
[ 0.061588] smp: Bringing up secondary CPUs ...
[ 0.093889] Detected VIPT I-cache on CPU1
[ 0.093941] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.093962] GICv3: CPU1: using allocated LPI pending table @0x000000007f460000
[ 0.094019] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.126018] Detected VIPT I-cache on CPU2
[ 0.126061] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.126079] GICv3: CPU2: using allocated LPI pending table @0x000000007f470000
[ 0.126124] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.158175] Detected VIPT I-cache on CPU3
[ 0.158216] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.158234] GICv3: CPU3: using allocated LPI pending table @0x000000007f500000
[ 0.158277] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.193010] CPU features: detected: EL2 vector hardening
[ 0.193369] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.193774] Detected PIPT I-cache on CPU4
[ 0.195017] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.195468] GICv3: CPU4: using allocated LPI pending table @0x000000007f510000
[ 0.196748] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.236836] Detected PIPT I-cache on CPU5
[ 0.238026] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.238460] GICv3: CPU5: using allocated LPI pending table @0x000000007f520000
[ 0.239581] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.244738] smp: Brought up 1 node, 6 CPUs
[ 0.245332] SMP: Total of 6 processors activated.
[ 0.245375] CPU features: detected: 32-bit EL0 Support
[ 0.245419] CPU features: detected: CRC32 instructions
[ 0.402707] CPU: All CPU(s) started at EL2
[ 0.403442] alternatives: patching kernel code
[ 0.408477] devtmpfs: initialized
[ 0.438178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.438428] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.444331] pinctrl core: initialized pinctrl subsystem
[ 0.449238] DMI not present or invalid.
[ 0.450244] NET: Registered protocol family 16
[ 0.469833] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.469977] audit: initializing netlink subsys (disabled)
[ 0.471859] audit: type=2000 audit(0.460:1): state=initialized audit_enabled=0 res=1
[ 0.474938] cpuidle: using governor menu
[ 0.476329] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.483128] Serial: AMBA PL011 UART driver
[ 0.580242] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.580531] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.580568] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.580605] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.599300] cryptd: max_cpu_qlen set to 1000
[ 0.637353] ACPI: Interpreter disabled.
[ 0.643940] vcc5v0_core: supplied by vdd_5v
[ 0.644619] vcc5v0_sys: supplied by vdd_5v
[ 0.644777] vbus_typec: supplied by vdd_5v
[ 0.645069] vcc5v0_usb1: supplied by vcc5v0_sys
[ 0.645412] vcc3v3_sys: supplied by vcc5v0_core
[ 0.645585] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.645904] vcc5v0_usb2: supplied by vcc5v0_sys
[ 0.649487] iommu: Default domain type: Translated
[ 0.654383] vgaarb: loaded
[ 0.655400] SCSI subsystem initialized
[ 0.657626] usbcore: registered new interface driver usbfs
[ 0.657752] usbcore: registered new interface driver hub
[ 0.658059] usbcore: registered new device driver usb
[ 0.660719] pps_core: LinuxPPS API ver. 1 registered
[ 0.660752] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.660833] PTP clock support registered
[ 0.661276] EDAC MC: Ver: 3.0.0
[ 0.666028] FPGA manager framework
[ 0.666327] Advanced Linux Sound Architecture Driver Initialized.
[ 0.670065] clocksource: Switched to clocksource arch_sys_counter
[ 0.670763] VFS: Disk quotas dquot_6.6.0
[ 0.670919] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.671367] pnp: PnP ACPI: disabled
[ 0.685392] thermal_sys: Registered thermal governor 'step_wise'
[ 0.685425] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.687121] NET: Registered protocol family 2
[ 0.688123] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.688251] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.688628] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.689231] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.689511] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.689658] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.690849] NET: Registered protocol family 1
[ 0.693642] RPC: Registered named UNIX socket transport module.
[ 0.693688] RPC: Registered udp transport module.
[ 0.693795] RPC: Registered tcp transport module.
[ 0.693825] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.693875] PCI: CLS 0 bytes, default 64
[ 0.694782] Unpacking initramfs...
[ 5.309124] Freeing initrd memory: 457196K
[ 5.319778] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 5.322602] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 5.323715] kvm [1]: IPA Size Limit: 40bits
[ 5.326099] kvm [1]: vgic-v2@fff20000
[ 5.326461] kvm [1]: GIC system register CPU interface enabled
[ 5.328935] kvm [1]: vgic interrupt IRQ10
[ 5.332073] kvm [1]: Hyp mode initialized successfully
[ 5.984652] Initialise system trusted keyrings
[ 5.989296] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 6.006965] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.013398] NFS: Registering the id_resolver key type
[ 6.013578] Key type id_resolver registered
[ 6.013607] Key type id_legacy registered
[ 6.013647] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.113414] Key type asymmetric registered
[ 6.113579] Asymmetric key parser 'x509' registered
[ 6.114161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 6.114208] io scheduler mq-deadline registered
[ 6.114236] io scheduler kyber registered
[ 6.184883] EINJ: ACPI disabled.
[ 6.203399] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 6.203511] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 6.206811] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 6.206869] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 6.233655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.239601] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[ 6.240042] serial serial0: tty port ttyS0 registered
[ 6.241299] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[ 6.341176] printk: console [ttyS2] enabled
[ 6.346153] SuperH (H)SCI(F) driver initialized
[ 6.348666] msm_serial: driver initialized
[ 6.354732] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 6.374598] loop: module loaded
[ 6.390374] libphy: Fixed MDIO Bus: probed
[ 6.391574] tun: Universal TUN/TAP device driver, 1.6
[ 6.396012] thunder_xcv, ver 1.0
[ 6.396437] thunder_bgx, ver 1.0
[ 6.396823] nicpf, ver 1.0
[ 6.399318] hclge is initializing
[ 6.399643] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 6.400306] hns3: Copyright (c) 2017 Huawei Corporation.
[ 6.400999] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.401539] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.402301] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 6.402942] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.403536] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 6.404256] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 6.406234] sky2: driver version 1.30
[ 6.409176] VFIO - User Level meta-driver version: 0.3
[ 6.423917] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 6.445393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.446386] ehci-pci: EHCI PCI platform driver
[ 6.446890] ehci-platform: EHCI generic platform driver
[ 6.450266] ehci-platform fe380000.usb: EHCI Host Controller
[ 6.450862] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 6.452026] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 6.466037] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 6.469181] hub 1-0:1.0: USB hub found
[ 6.469592] hub 1-0:1.0: 1 port detected
[ 6.473235] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 6.473875] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 6.474845] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 6.489955] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 6.491996] hub 2-0:1.0: USB hub found
[ 6.492410] hub 2-0:1.0: 1 port detected
[ 6.493930] ehci-orion: EHCI orion driver
[ 6.494788] ehci-exynos: EHCI EXYNOS driver
[ 6.495500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.496249] ohci-pci: OHCI PCI platform driver
[ 6.496770] ohci-platform: OHCI generic platform driver
[ 6.497961] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 6.498638] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 6.499724] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 6.563864] hub 3-0:1.0: USB hub found
[ 6.564340] hub 3-0:1.0: 1 port detected
[ 6.565864] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 6.566539] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 6.567502] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 6.631077] hub 4-0:1.0: USB hub found
[ 6.631489] hub 4-0:1.0: 1 port detected
[ 6.632899] ohci-exynos: OHCI EXYNOS driver
[ 6.635292] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.635927] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 6.636953] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 6.637997] xhci-hcd xhci-hcd.0.auto: irq 227, io mem 0xfe800000
[ 6.641000] hub 5-0:1.0: USB hub found
[ 6.641415] hub 5-0:1.0: 1 port detected
[ 6.642606] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.643148] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 6.643873] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.644605] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.646716] hub 6-0:1.0: USB hub found
[ 6.647122] hub 6-0:1.0: 1 port detected
[ 6.648465] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.649009] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 6.650123] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 6.651151] xhci-hcd xhci-hcd.1.auto: irq 228, io mem 0xfe900000
[ 6.653488] hub 7-0:1.0: USB hub found
[ 6.653946] hub 7-0:1.0: 1 port detected
[ 6.654952] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.655491] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 6.656214] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.656936] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.658852] hub 8-0:1.0: USB hub found
[ 6.659262] hub 8-0:1.0: 1 port detected
[ 6.661305] usbcore: registered new interface driver usb-storage
[ 6.672729] i2c /dev entries driver
[ 6.683337] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 6.684093] fan53555-reg: supplied by vcc3v3_sys
[ 6.687302] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 6.687965] fan53555-reg: supplied by vcc3v3_sys
[ 6.691049] rk808 0-001b: chip id: 0x0
[ 6.702600] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 6.703267] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 6.703943] DCDC_REG1: supplied by vcc3v3_sys
[ 6.706096] DCDC_REG2: supplied by vcc3v3_sys
[ 6.707370] DCDC_REG3: supplied by vcc3v3_sys
[ 6.708209] DCDC_REG4: supplied by vcc3v3_sys
[ 6.709414] LDO_REG1: supplied by vcc3v3_sys
[ 6.711543] LDO_REG2: supplied by vcc3v3_sys
[ 6.713182] LDO_REG3: supplied by vcc3v3_sys
[ 6.715056] LDO_REG4: supplied by vcc3v3_sys
[ 6.716876] LDO_REG5: supplied by vcc3v3_sys
[ 6.718566] LDO_REG6: supplied by vcc3v3_sys
[ 6.720402] LDO_REG7: supplied by vcc3v3_sys
[ 6.722168] LDO_REG8: supplied by vcc3v3_sys
[ 6.723958] SWITCH_REG1: supplied by vcc3v3_sys
[ 6.724925] SWITCH_REG2: supplied by vcc3v3_sys
[ 6.752800] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[ 6.754258] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[ 6.793782] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[ 6.810768] random: fast init done
[ 6.815350] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[ 6.818436] sdhci: Secure Digital Host Controller Interface driver
[ 6.818981] sdhci: Copyright(c) Pierre Ossman
[ 6.819617] Synopsys Designware Multimedia Card Interface Driver
[ 6.820658] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 6.821300] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 6.821908] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 6.822435] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 6.823344] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 6.823863] mmc_host mmc0: card is non-removable.
[ 6.837329] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.851099] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 6.851739] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 6.852345] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 6.852865] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 6.853816] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[ 6.865857] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.878621] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.879742] mmc2: CQHCI version 5.10
[ 6.887430] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 6.889619] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.891811] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.896326] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 6.905763] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 6.907708] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.908956] usbcore: registered new interface driver usbhid
[ 6.909452] usbhid: USB HID core driver
[ 6.912512] NET: Registered protocol family 17
[ 6.912942] Key type dns_resolver registered
[ 6.913569] registered taskstats version 1
[ 6.913941] Loading compiled-in X.509 certificates
[ 6.927755] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 6.928682] hctosys: unable to open rtc device (rtc0)
[ 6.929565] ALSA device list:
[ 6.929843] No soundcards found.
[ 6.930262] ttyS2 - failed to request DMA
[ 6.932650] Freeing unused kernel memory: 4992K
[ 6.953908] Run /init as init process
[ 6.962987] systemd[1]: System time before build time, advancing clock.
[ 6.967321] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 6.974043] mmc2: Command Queue Engine enabled
[ 6.974448] mmc2: new HS200 MMC card at address 0001
[ 6.975187] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
[ 6.975645] mmcblk2boot0: mmc2:0001 8GTF4R partition 1 4.00 MiB
[ 6.976261] mmcblk2boot1: mmc2:0001 8GTF4R partition 2 4.00 MiB
[ 6.976948] mmcblk2rpmb: mmc2:0001 8GTF4R partition 3 512 KiB, chardev (237:0)
[ 6.978533] mmcblk2: p1
[ 6.979991] NET: Registered protocol family 10
[ 6.980739] Segment Routing with IPv6
[ 6.985830] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOM)
[ 6.987968] systemd[1]: Detected architecture arm64.
[ 6.989819] usb 7-1: new high-speed USB device number 2 using xhci-hcd
Welcome to Ubuntu 19.10!
[ 7.009956] systemd[1]: Set hostname to <nanopi-m4>.
[ 7.010824] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 7.050889] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup.
[ 7.052381] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 7.067037] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket ��→ /r.
[ 7.087797] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.088539] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.089908] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 7.090936] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.091527] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 7.101795] random: systemd: uninitialized urandom read (16 bytes read)
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Created slice User and Session Slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Slices.
[ OK ] Reached target Swap.
[ OK ] Listening on Journal Socket.
Starting Journal Service...
Mounting POSIX Message Queue File System...
Starting Create list of re��…odes for the current kerne[ 7.201263] hub 7-1:1.0: USB hub found
l...
[ 7.201973] hub 7-1:1.0: 4 ports detected
Mounting Kernel Debug File System...
Starting Load Kernel Modules...
[ 7.225984] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 187
Starting Helper to synchronize boot up for ifu[ 7.229009] mmc0: new ultra high speed SDR104 SDIO card at address 0001
pdown...
Mounting Huge Pages File System...
Starting Remount Root and Kernel File Systems...
[ OK ] Started Forward Password R��…uests to Wall Directory Watch.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 7.295880] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ OK ] Started Dispatch Password ��…ts to Console Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Local Encrypted Volumes.
[FAILED] Failed to mount POSIX Message Queue File System.
See 'systemctl status dev-mqueue.mount' for details.
[ OK ] Started Create list of req��… nodes for the current kernel.
[FAILED] Failed to mount Kernel Debug File System.
See 'systemctl status sys-kernel-debug.mount' for details.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Helper to synchronize boot up for ifupdown.
[FAILED] Failed to mount Huge Pages File System.
[ 7.409131] hub 8-1:1.0: USB hub found
[ 7.409653] hub 8-1:1.0: 4 ports detected
See 'systemctl status dev-hugepages.mount' for details.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Create System Users...
Starting Load/Save Random Seed...
Mounting Kernel Configuration File System...
Starting Apply Kernel Variables...
[ OK ] Started Create System Users.
[ OK ] Started Load/Save Random Seed.
[FAILED] Failed to mount Kernel Configuration File System.
See 'systemctl status sys-kernel-config.mount' for details.
[ OK ] Started Apply Kernel Variables.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
[ 7.544377] systemd-sysusers[218]: Creating group systemd-coredump with gid 999.
[ OK ] Started Journal Service.
[ 7.561162] mount[208]: mount: only root can use "--options" option (effective UID is 1000)
[ OK ] Started Raise network interfaces.
[ 7.584748] systemd-sysusers[218]: Creating user systemd-coredump (systemd Core Dumper) with uid 999 and gid 999.
Starting Flush Journal to Persistent Storage...
[ 7.597313] systemd-sysctl[221]: Couldn't write '1' to 'kernel/yama/ptrace_scope', ignoring: No such file or directory
[ 7.626391] mount[210]: mount: only root can use "--options" option (effective UID is 1000)
[ OK ] Started Flush Journal to Persistent Storage.
[ 7.636841] systemd-sysctl[221]: Couldn't write 'fq_codel' to 'net/core/default_qdisc', ignoring: No such file or directory
Starting Create Volatile Files and Directories...
[ 7.665412] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev.
[ OK ] Started Create Volatile Files and Directories.
[ 7.693320] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev.
Starting Network Time Synchronization...
[ 7.721102] mount[214]: mount: only root can use "--types" option (effective UID is 1000)
Starting Update UTMP about System Boot/Shutdown...
[ 7.736686] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev.
Starting Network Name Resolution...
[ 7.765141] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 7.776967] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev/mapper.
[ 7.804947] systemd-tmpfiles[222]: Detected unsafe path transition / ��→ /dev during canonicalization of /dev.
[ 7.817067] mount[220]: mount: only root can use "--options" option (effective UID is 1000)
[ 7.832545] systemd[1]: Started Raise network interfaces.
[ 7.845064] systemd[1]: Starting Flush Journal to Persistent Storage...
[ 7.860946] systemd[1]: Started Flush Journal to Persistent Storage.
[ 7.872953] systemd[1]: Starting Create Volatile Files and Directories...
[ 7.889095] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ 7.904969] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/lock.
[ 7.921015] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ OK ] Started Network Time Synchronization.
[ 7.936938] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/sudo.
[ OK ] Reached target System Initialization.
[ 7.964973] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ 7.993894] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ OK ] Reached target Sockets.
[ 8.016507] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ OK ] Reached target Basic System.
[ 8.040492] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
Starting Remove Stale Onli��…t4 Metadata Check Snapshots...
[ 8.064590] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
Starting Dispatcher daemon for systemd-networkd...
[ 8.088720] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
[ 8.117096] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
[ OK ] Started D-Bus System Message Bus.
[ 8.129053] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
[ OK ] Started Set the CPU Frequency Scaling governor.
[ 8.152860] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
[ 8.176572] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd.
[ 8.188662] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd/netif.
[ 8.190511] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run/systemd/netif.
[ 8.200506] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /run during canonicalization of /run.
[ 8.212562] systemd-tmpfiles[239]: Detected unsafe path transition /var/lib ��→ /var/lib/systemd during canonicalization of /var/lib/systemd.
Starting Login Service...
[ 8.228883] networkd-dispatcher[246]: No valid path found for iwconfig
[ OK ] Started Daily Cleanup of Temporary Directories.
[ 8.252420] networkd-dispatcher[246]: No valid path found for iw
[ OK ] Reached target System Time Set.
[ 8.276390] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /tmp during canonicalization of /tmp.
[ OK ] Reached target System Time Synchronized.
[ 8.288517] networkd-dispatcher[246]: WARNING: systemd-networkd is not running, output will be incomplete.
[ OK ] Started Discard unused blocks once a week.
[ 8.316353] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /tmp during canonicalization of /tmp.
[ OK ] Started Message of the Day.
[ 8.340372] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /tmp during canonicalization of /tmp.
[ OK ] Started Daily apt download activities.
[ 8.364382] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /tmp during canonicalization of /tmp.
[ OK ] Started Periodic ext4 Onli��…ata Check for All Filesystems.
[ 8.388400] systemd-tmpfiles[239]: Detected unsafe path transition / ��→ /tmp during canonicalization of /tmp.
[ OK ] Started Daily apt upgrade and clean activities.
[ 8.400355] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal.
[ OK ] Reached target Timers.
[ 8.413622] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal.
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ 8.425593] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal.
[ OK ] Started Network Name Resolution.
[ 8.448352] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target Network.[ 8.461630]
systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c3855.
Starting Permit User Sessions...
[ 8.484496] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c385.
Starting OpenBSD Secure Shell server...
[ 8.508678] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c385.
[ OK ] Started Permit User Sessions.
[ 8.532983] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c385.
[ OK ] Started Getty on tty1.
[ 8.557025] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c385.
[ 8.580626] systemd-tmpfiles[239]: Detected unsafe path transition /var/log ��→ /var/log/journal during canonicalization of /var/log/journal/7fc4717e1e884bb8b279e1b3d79c385.
[ 8.593186] systemd[1]: Started Create Volatile Files and Directories.
[ 8.604612] systemd[1]: Starting Network Time Synchronization...
[ 8.605642] systemd[1]: Starting Update UTMP about System Boot/Shutdown...
[ 8.616456] systemd[1]: Starting Network Name Resolution...
[ 8.628613] systemd[1]: Started Update UTMP about System Boot/Shutdown.
[ 8.640544] systemd[1]: Started Network Time Synchronization.
[ 8.641583] systemd[1]: Reached target System Initialization.
[ OK ] Started Login Service.
[ 8.652514] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 8.680602] systemd[1]: Reached target Sockets.
[ 8.692644] systemd[1]: Reached target Basic System.
[ 8.704678] systemd[1]: Starting Remove Stale Online ext4 Metadata Check Snapshots...
[ 8.716682] systemd[1]: Starting Dispatcher daemon for systemd-networkd...
[ 8.728656] systemd[1]: Started D-Bus System Message Bus.
[ 8.740654] systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped.
[ 8.752637] systemd[1]: Started Set the CPU Frequency Scaling governor.
[ 8.764576] systemd[1]: Starting Login Service...
[ 8.776660] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 8.789325] systemd-resolved[242]: Positive Trust Anchors:
[ 8.800652] systemd-resolved[242]: . IN DS 19036 8 2 49aac11d7b6f6446702e54a1607371607a1a41855200fd2ce1cdde32f24e8fb5
[ 8.812660] systemd-resolved[242]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d
[ 8.824551] systemd-resolved[242]: Negative trust anchors: 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.art
[ 8.840628] systemd-resolved[242]: Using system hostname 'nanopi-m4'.
[ 8.852653] systemd[1]: Reached target System Time Set.
[ 8.864667] systemd[1]: Reached target System Time Synchronized.
[ 8.865895] systemd[1]: Started Discard unused blocks once a week.
[ 8.876297] systemd[1]: Started Message of the Day.
[ 8.888670] systemd[1]: Started Daily apt download activities.
[ 8.889641] systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems.
[ 8.900345] systemd[1]: Started Daily apt upgrade and clean activities.
[ 8.912314] systemd[1]: Reached target Timers.
[ 8.924684] systemd[1]: Started Dispatcher daemon for systemd-networkd.
[ 8.936649] systemd[1]: Started Network Name Resolution.
[ 8.948650] systemd[1]: Reached target Host and Network Name Lookups.
[ 8.960641] systemd[1]: Reached target Network.
[ 8.972680] systemd[1]: Starting Permit User Sessions...
[ 8.984640] systemd[1]: Starting OpenBSD Secure Shell server...
[ 8.985865] systemd[1]: Started Permit User Sessions.
[ 8.996578] systemd[1]: Started Getty on tty1.
[ 9.009442] systemd-logind[249]: Failed to read /var/run/utmp, ignoring: No such file or directory
[ 9.020542] systemd-logind[249]: New seat seat0.
[ 9.032684] systemd[1]: Started Login Service.
[ 10.069931] systemd[1]: e2scrub_reap.service: Succeeded.
[ OK ] Started Remove Stale Onlin��…ext4 Metadata Check Snapshots.
[ 10.080489] systemd[1]: Started Remove Stale Online ext4 Metadata Check Snapshots.
[ OK ] Started OpenBSD Secure Shell server.
[ 10.878835] sshd[256]: Server listening on 0.0.0.0 port 22.
[ 10.904654] sshd[256]: Server listening on :: port 22.
[ 10.916688] systemd[1]: Started OpenBSD Secure Shell server.
[ 14.162566] set-cpufreq[248]: Setting ondemand scheduler for all CPUs
[ 14.174369] systemd[1]: ondemand.service: Succeeded.
[ TIME ] Timed out waiting for device /dev/ttyS2.
[ 97.396966] systemd[1]: dev-ttyS2.device: Job dev-ttyS2.device/start timed out.
[DEPEND] Dependency failed for Serial Getty on ttyS2.
[ 97.417423] systemd[1]: Timed out waiting for device /dev/ttyS2.
[ 97.430074] systemd[1]: Dependency failed for Serial Getty on ttyS2.
[ OK ] Reached target Login Prompts.
[ 97.444801] systemd[1]: serial-getty@ttyS2.service: Job serial-getty@ttyS2.service/start failed with result 'dependency'.
[ OK ] Reached target Multi-User System.
[ 97.468828] systemd[1]: dev-ttyS2.device: Job dev-ttyS2.device/start failed with result 'timeout'.
[ OK ] Reached target Graphical Interface.
[ 97.493129] systemd[1]: Reached target Login Prompts.
Starting Update UTMP about System Runlevel Changes...
[ 97.504966] systemd[1]: Reached target Multi-User System.
[ 97.516547] systemd[1]: Reached target Graphical Interface.
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 97.532758] systemd[1]: Starting Update UTMP about System Runlevel Changes...
[ 97.565007] systemd[1]: systemd-update-utmp-runlevel.service: Succeeded.
[ 97.566560] systemd[1]: Started Update UTMP about System Runlevel Changes.
[ 97.576609] systemd[1]: Startup finished in 6.948s (kernel) + 1min 30.600s (userspace) = 1min 37.548s.
@avafinger
Copy link

Are you booting from eMMC?

@dmikushin
Copy link
Author

Yes

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment