Last active
October 7, 2016 21:44
-
-
Save dmopalmer/a26081c86bf73613904857a24247f636 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
{ | |
"id": "rostock-maxV3", | |
"version": 2, | |
"name": "Rostock Max v3", | |
"inherits": "fdmprinter", | |
"metadata": { | |
"type": "machine", | |
"visible": true, | |
"author": "dmpalmer", | |
"manufacturer": "SeeMeCNC", | |
"category": "Custom", | |
"weight": 8, | |
"file_formats": "text/x-gcode", | |
"icon": "icon_ultimaker.png", | |
"platform": "ultimaker_platform.stl", | |
"has_materials": true, | |
"first_start_actions": ["UMOUpgradeSelection", "UMOCheckup", "BedLevel"], | |
"supported_actions": ["UMOUpgradeSelection", "UMOCheckup", "BedLevel", "UpgradeFirmware"] | |
}, | |
"overrides": { | |
"machine_name": { "default_value": "Rostock Max v3" }, | |
"machine_width": { | |
"default_value": 270 | |
}, | |
"machine_height": { | |
"default_value": 400 | |
}, | |
"machine_depth": { | |
"default_value": 270 | |
}, | |
"machine_center_is_zero": { | |
"default_value": true | |
}, | |
"machine_nozzle_size": { | |
"default_value": 0.5 | |
}, | |
"machine_nozzle_heat_up_speed": { | |
"default_value": 2 | |
}, | |
"machine_nozzle_cool_down_speed": { | |
"default_value": 2 | |
}, | |
"machine_head_with_fans_polygon": | |
{ | |
"default_value": [ | |
[ -60, 40 ], | |
[ 60, 40 ], | |
[ 0, -70] | |
] | |
}, | |
"gantry_height": { | |
"default_value": 50 | |
}, | |
"machine_use_extruder_offset_to_offset_coords": { | |
"default_value": true | |
}, | |
"machine_gcode_flavor": { | |
"default_value": "RepRap (Marlin/Sprinter)" | |
}, | |
"machine_start_gcode": { | |
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ; Home all axes\nG0 X100 Y95 Z0 F9000 ;move the platform down to a wipe area\nG92 E0 ;zero the extruded length\nG1 X95 Y100 Z0 E2 F2000 ;extrude 2 mm of feed stock while wiping\nG92 E0 ;zero the extruded length again\nG4 P2000 ; wait for extrusion and seepage to finish\nG1 X85 Y110 F2000 ; continue to wipe without further extrusion\nG1 X0 Y0 Z25 F9000; recenter with a slight lift\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." | |
}, | |
"machine_end_gcode": { | |
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" | |
}, | |
"machine_heated_bed": | |
{ | |
"default_value": true | |
}, | |
"material_diameter": { | |
"default_value": 1.70 | |
}, | |
"machine_disallowed_areas": { | |
"default_value": [[[137.5, 137.5], [137.5, 0.0], [132.8148011147469, 35.587618701596604]], [[-137.5, 137.5], [-137.5, 0.0], [-132.8148011147469, 35.587618701596604]], [[137.5, -137.5], [137.5, -0.0], [132.8148011147469, -35.587618701596604]], [[-137.5, -137.5], [-137.5, -0.0], [-132.8148011147469, -35.587618701596604]], [[137.5, 137.5], [132.8148011147469, 35.587618701596604], [119.07849302036033, 68.74999999999999]], [[-137.5, 137.5], [-132.8148011147469, 35.587618701596604], [-119.07849302036033, 68.74999999999999]], [[137.5, -137.5], [132.8148011147469, -35.587618701596604], [119.07849302036033, -68.74999999999999]], [[-137.5, -137.5], [-132.8148011147469, -35.587618701596604], [-119.07849302036033, -68.74999999999999]], [[137.5, 137.5], [119.07849302036033, 68.74999999999999], [97.22718241315029, 97.22718241315027]], [[-137.5, 137.5], [-119.07849302036033, 68.74999999999999], [-97.22718241315029, 97.22718241315027]], [[137.5, -137.5], [119.07849302036033, -68.74999999999999], [97.22718241315029, -97.22718241315027]], [[-137.5, -137.5], [-119.07849302036033, -68.74999999999999], [-97.22718241315029, -97.22718241315027]], [[137.5, 137.5], [97.22718241315029, 97.22718241315027], [68.75000000000001, 119.07849302036031]], [[-137.5, 137.5], [-97.22718241315029, 97.22718241315027], [-68.75000000000001, 119.07849302036031]], [[137.5, -137.5], [97.22718241315029, -97.22718241315027], [68.75000000000001, -119.07849302036031]], [[-137.5, -137.5], [-97.22718241315029, -97.22718241315027], [-68.75000000000001, -119.07849302036031]], [[137.5, 137.5], [68.75000000000001, 119.07849302036031], [35.58761870159663, 132.81480111474687]], [[-137.5, 137.5], [-68.75000000000001, 119.07849302036031], [-35.58761870159663, 132.81480111474687]], [[137.5, -137.5], [68.75000000000001, -119.07849302036031], [35.58761870159663, -132.81480111474687]], [[-137.5, -137.5], [-68.75000000000001, -119.07849302036031], [-35.58761870159663, -132.81480111474687]], [[137.5, 137.5], [35.58761870159663, 132.81480111474687], [8.419446744138054e-15, 137.5]], [[-137.5, 137.5], [-35.58761870159663, 132.81480111474687], [-8.419446744138054e-15, 137.5]], [[137.5, -137.5], [35.58761870159663, -132.81480111474687], [8.419446744138054e-15, -137.5]], [[-137.5, -137.5], [-35.58761870159663, -132.81480111474687], [-8.419446744138054e-15, -137.5]]] | |
} | |
} | |
} |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Based on onitake 's work to put delta printers into Cura.
https://gist.github.com/onitake/78a35293501b03c2dd72c9ab5dede1db
https://gist.github.com/onitake/f94722ec6cfccb8d3f6adaebb63b7283