AM62_Mainline_Uboot_Boot_Failed_Regression.txt

U-Boot SPL 2024.10-rc6 (Oct 03 2024 - 16:16:24 +0200)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
Changed A53 CPU frequency to 1250000000Hz (T grade) in DT
SPL initial stack usage: 13400 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b8740
NOTICE:  BL31: Built : 11:12:16, Oct  1 2024
I/TC: 
I/TC: OP-TEE version: 4.2.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Tue Oct  1 09:15:44 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2024.10-rc6 (Oct 03 2024 - 16:16:53 +0200)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
SPL initial stack usage: 1968 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed


U-Boot 2024.10-rc6 (Oct 03 2024 - 16:16:53 +0200)

SoC:   AM62X SR1.0 HS-FS
DRAM:  2 GiB
Core:  151 devices, 31 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... Reading from MMC(0)... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Model: Toradex 0076 Verdin AM62 Quad 2GB WB IT V1.1C
Serial#: 15380670
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754322
am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: 0x6BA81103 ale_ver: 0x00290105 Ports:2
Setting variant to wifi
Net:   
Warning: ethernet@8000000port@1 MAC addresses don't match:
Address in ROM is               98:03:8a:76:36:10
Address in environment is       00:14:2d:ea:b0:be
eth0: ethernet@8000000port@1 [PRIME], eth1: ethernet@8000000port@2
Hit any key to stop autoboot:  0 
MMC: no card present
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
5935 bytes read in 10 ms (579.1 KiB/s)
## Executing script at 90280000
Loading DeviceTree: k3-am625-verdin-wifi-dev.dtb
72315 bytes read in 12 ms (5.7 MiB/s)
82 bytes read in 11 ms (6.8 KiB/s)
Working FDT set to 90200000
Applying Overlay: verdin-am62_dsi-to-hdmi_overlay.dtbo
3050 bytes read in 11 ms (270.5 KiB/s)
Applying Overlay: verdin-am62_spidev_overlay.dtbo
560 bytes read in 11 ms (48.8 KiB/s)
7838383 bytes read in 59 ms (126.7 MiB/s)
Bootargs: root=PARTUUID=c2340d16-02 ro rootwait console=tty1 console=ttyS2
   Uncompressing Kernel Image to 0
## Flattened Device Tree blob at 90200000
   Booting using the fdt blob at 0x90200000
Working FDT set to 90200000
   Loading Device Tree to 0000000098eaa000, end 0000000098edefff ... OK
Working FDT set to 98eaa000

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot


------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


U-Boot SPL 2024.10-rc6 (Oct 03 2024 - 16:16:24 +0200)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
Changed A53 CPU frequency to 1250000000Hz (T grade) in DT
SPL initial stack usage: 13400 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b8740
NOTICE:  BL31: Built : 11:12:16, Oct  1 2024
I/TC: 
I/TC: OP-TEE version: 4.2.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Tue Oct  1 09:15:44 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2024.10-rc6 (Oct 03 2024 - 16:16:53 +0200)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
SPL initial stack usage: 1968 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed


U-Boot 2024.10-rc6 (Oct 03 2024 - 16:16:53 +0200)

SoC:   AM62X SR1.0 HS-FS
DRAM:  2 GiB
Core:  151 devices, 31 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... Reading from MMC(0)... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Model: Toradex 0076 Verdin AM62 Quad 2GB WB IT V1.1C
Serial#: 15380670
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754322
am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: 0x6BA81103 ale_ver: 0x00290105 Ports:2
Setting variant to wifi
Net:   
Warning: ethernet@8000000port@1 MAC addresses don't match:
Address in ROM is               98:03:8a:76:36:10
Address in environment is       00:14:2d:ea:b0:be
eth0: ethernet@8000000port@1 [PRIME], eth1: ethernet@8000000port@2
Hit any key to stop autoboot:  0 
Verdin AM62 # 
Verdin AM62 # 
Verdin AM62 # 
Verdin AM62 # 
Verdin AM62 # 
Verdin AM62 # 
Verdin AM62 # bdinfo 
boot_params = 0x0000000000000000
DRAM bank   = 0x0000000000000000
-> start    = 0x0000000080000000
-> size     = 0x0000000080000000
flashstart  = 0x0000000000000000
flashsize   = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate    = 115200 bps
relocaddr   = 0x000000009bf01000
reloc off   = 0x000000001b701000
Build       = 64-bit
current eth = ethernet@8000000port@1
ethaddr     = 00:14:2d:ea:b0:be
IP addr     = <NULL>
fdt_blob    = 0x0000000099ee9500
new_fdt     = 0x0000000099ee9500
fdt_size    = 0x0000000000015880
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
 memory.cnt = 0x1 / max = 0x10
 memory[0]      [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
 reserved.cnt = 0x3 / max = 0x10
 reserved[0]    [0x98edf000-0x9bffffff], 0x03121000 bytes flags: 0
 reserved[1]    [0x9db00000-0x9e6fffff], 0x00c00000 bytes flags: 4
 reserved[2]    [0x9e780000-0x9fffffff], 0x01880000 bytes flags: 4
devicetree  = separate
serial addr = 0x0000000002800000
 width      = 0x0000000000000000
 shift      = 0x0000000000000002
 offset     = 0x0000000000000000
 clock      = 0x0000000002dc6c00
arch_number = 0x0000000000000000
TLB addr    = 0x000000009bff0000
irq_sp      = 0x0000000099ee94f0
sp start    = 0x0000000099ee94f0
Early malloc usage: 2d48 / 8000