Created
May 11, 2015 21:52
-
-
Save donothingbox/73247170a120726f0fc1 to your computer and use it in GitHub Desktop.
Output message of Microduino 1284p 8mhz & Arduino 1.6.3
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega1284p -cstk500v1 -P/dev/cu.usbmodemfd41141 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0xFD:m -Uhfuse:w:0x9E:m -Ulfuse:w:0xFF:m | |
avrdude: Version 6.0.1, compiled on Mar 30 2015 at 12:15:29 | |
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
Copyright (c) 2007-2009 Joerg Wunsch | |
System wide configuration file is "/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf" | |
User configuration file is "/Users/USERNAME/.avrduderc" | |
User configuration file does not exist or is not a regular file, skipping | |
Using Port : /dev/cu.usbmodemfd41141 | |
Using Programmer : stk500v1 | |
Overriding Baud Rate : 19200 | |
AVR Part : ATmega1284P | |
Chip Erase delay : 55000 us | |
PAGEL : PD7 | |
BS2 : PA0 | |
RESET disposition : dedicated | |
RETRY pulse : SCK | |
serial program mode : yes | |
parallel program mode : yes | |
Timeout : 200 | |
StabDelay : 100 | |
CmdexeDelay : 25 | |
SyncLoops : 32 | |
ByteDelay : 0 | |
PollIndex : 3 | |
PollValue : 0x53 | |
Memory Detail : | |
Block Poll Page Polled | |
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
eeprom 65 10 128 0 no 4096 8 0 9000 9000 0xff 0xff | |
flash 65 10 256 0 yes 131072 256 512 4500 4500 0xff 0xff | |
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
Programmer Type : STK500 | |
Description : Atmel STK500 Version 1.x firmware | |
Hardware Version: 2 | |
Firmware Version: 1.18 | |
Topcard : Unknown | |
Vtarget : 0.0 V | |
Varef : 0.0 V | |
Oscillator : Off | |
SCK period : 0.1 us | |
avrdude: AVR device initialized and ready to accept instructions | |
Reading | ################################################## | 100% 0.05s | |
avrdude: Device signature = 0x1e9705 | |
avrdude: erasing chip | |
avrdude: reading input file "0x3F" | |
avrdude: writing lock (1 bytes): | |
Writing | ################################################## | 100% 0.02s | |
avrdude: 1 bytes of lock written | |
avrdude: verifying lock memory against 0x3F: | |
avrdude: load data lock data from input file 0x3F: | |
avrdude: input file 0x3F contains 1 bytes | |
avrdude: reading on-chip lock data: | |
Reading | ################################################## | 100% 0.02s | |
avrdude: verifying ... | |
avrdude: 1 bytes of lock verified | |
avrdude: reading input file "0xFD" | |
avrdude: writing efuse (1 bytes): | |
Writing | ################################################## | 100% 0.02s | |
avrdude: 1 bytes of efuse written | |
avrdude: verifying efuse memory against 0xFD: | |
avrdude: load data efuse data from input file 0xFD: | |
avrdude: input file 0xFD contains 1 bytes | |
avrdude: reading on-chip efuse data: | |
Reading | ################################################## | 100% 0.02s | |
avrdude: verifying ... | |
avrdude: 1 bytes of efuse verified | |
avrdude: reading input file "0x9E" | |
avrdude: writing hfuse (1 bytes): | |
Writing | ################################################## | 100% 0.02s | |
avrdude: 1 bytes of hfuse written | |
avrdude: verifying hfuse memory against 0x9E: | |
avrdude: load data hfuse data from input file 0x9E: | |
avrdude: input file 0x9E contains 1 bytes | |
avrdude: reading on-chip hfuse data: | |
Reading | ################################################## | 100% 0.02s | |
avrdude: verifying ... | |
avrdude: 1 bytes of hfuse verified | |
avrdude: reading input file "0xFF" | |
avrdude: writing lfuse (1 bytes): | |
Writing | ################################################## | 100% 0.02s | |
avrdude: 1 bytes of lfuse written | |
avrdude: verifying lfuse memory against 0xFF: | |
avrdude: load data lfuse data from input file 0xFF: | |
avrdude: input file 0xFF contains 1 bytes | |
avrdude: reading on-chip lfuse data: | |
Reading | ################################################## | 100% 0.02s | |
avrdude: verifying ... | |
avrdude: 1 bytes of lfuse verified | |
avrdude done. Thank you. | |
/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega1284p -cstk500v1 -P/dev/cu.usbmodemfd41141 -b19200 -Uflash:w:/Applications/Arduino 1.6.3.app/Contents/Java/hardware/Microduino/avr/bootloaders/optiboot/optiboot_micro_1284_8m.hex:i -Ulock:w:0x0F:m | |
avrdude: Version 6.0.1, compiled on Mar 30 2015 at 12:15:29 | |
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
Copyright (c) 2007-2009 Joerg Wunsch | |
System wide configuration file is "/Applications/Arduino 1.6.3.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf" | |
User configuration file is "/Users/USERNAME/.avrduderc" | |
User configuration file does not exist or is not a regular file, skipping | |
Using Port : /dev/cu.usbmodemfd41141 | |
Using Programmer : stk500v1 | |
Overriding Baud Rate : 19200 | |
AVR Part : ATmega1284P | |
Chip Erase delay : 55000 us | |
PAGEL : PD7 | |
BS2 : PA0 | |
RESET disposition : dedicated | |
RETRY pulse : SCK | |
serial program mode : yes | |
parallel program mode : yes | |
Timeout : 200 | |
StabDelay : 100 | |
CmdexeDelay : 25 | |
SyncLoops : 32 | |
ByteDelay : 0 | |
PollIndex : 3 | |
PollValue : 0x53 | |
Memory Detail : | |
Block Poll Page Polled | |
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
eeprom 65 10 128 0 no 4096 8 0 9000 9000 0xff 0xff | |
flash 65 10 256 0 yes 131072 256 512 4500 4500 0xff 0xff | |
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
Programmer Type : STK500 | |
Description : Atmel STK500 Version 1.x firmware | |
Hardware Version: 2 | |
Firmware Version: 1.18 | |
Topcard : Unknown | |
Vtarget : 0.0 V | |
Varef : 0.0 V | |
Oscillator : Off | |
SCK period : 0.1 us | |
avrdude: AVR device initialized and ready to accept instructions | |
Reading | ################################################## | 100% 0.05s | |
avrdude: Device signature = 0x1e9705 | |
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed | |
To disable this feature, specify the -D option. | |
avrdude: erasing chip | |
avrdude: reading input file "/Applications/Arduino 1.6.3.app/Contents/Java/hardware/Microduino/avr/bootloaders/optiboot/optiboot_micro_1284_8m.hex" | |
avrdude: writing flash (131072 bytes): | |
Writing | ################################################## | 100% 0.00s | |
avrdude: 131072 bytes of flash written | |
avrdude: verifying flash memory against /Applications/Arduino 1.6.3.app/Contents/Java/hardware/Microduino/avr/bootloaders/optiboot/optiboot_micro_1284_8m.hex: | |
avrdude: load data flash data from input file /Applications/Arduino 1.6.3.app/Contents/Java/hardware/Microduino/avr/bootloaders/optiboot/optiboot_micro_1284_8m.hex: | |
avrdude: input file /Applications/Arduino 1.6.3.app/Contents/Java/hardware/Microduino/avr/bootloaders/optiboot/optiboot_micro_1284_8m.hex contains 131072 bytes | |
avrdude: reading on-chip flash data: | |
Reading | ################################################## | 100% 0.00s | |
avrdude: verifying ... | |
avrdude: 131072 bytes of flash verified | |
avrdude: reading input file "0x0F" | |
avrdude: writing lock (1 bytes): | |
Writing | ################################################## | 100% 0.05s | |
avrdude: 1 bytes of lock written | |
avrdude: verifying lock memory against 0x0F: | |
avrdude: load data lock data from input file 0x0F: | |
avrdude: input file 0x0F contains 1 bytes | |
avrdude: reading on-chip lock data: | |
Reading | ################################################## | 100% 0.02s | |
avrdude: verifying ... | |
avrdude: 1 bytes of lock verified | |
avrdude done. Thank you. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment