gistfile1.txt

root@OpenWrt:~# lspci
00:00.0 Host bridge: Broadcom Corporation BCM5365P Sentry5 Host Bridge
00:01.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
00:02.0 USB Controller: NEC Corporation USB (rev 43)
00:02.1 USB Controller: NEC Corporation USB (rev 43)
00:02.2 USB Controller: NEC Corporation USB 2.0 (rev 04)


root@OpenWrt:~# dmesg
Linux version 2.6.25.20 (andy@stable-sandbox) (gcc version 4.1.2) #3 Mon Sep 14 09:03:26 UTC 2009
CPU revision is: 00029007 (Broadcom BCM3302)
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x05, vendor 0x4243)
ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)
ssb: Core 2 found: IPSEC (cc 0x80B, rev 0x01, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x02, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243)
ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x01, vendor 0x4243)
ssb: Core 6 found: MEMC SDRAM (cc 0x80F, rev 0x00, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 2 => 2
ssb: set_irq: core 0x0804, irq 0 => 3
early_nvram_init: WGT634U NVRAM found.
ssb: Sonics Silicon Backplane found at address 0x18000000
Swapping serial ports!
Serial init done.
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Entering add_active_range(0, 0, 8192) 0 entries of 256 used
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal          0 ->     8192
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->     8192
On node 0 totalpages: 8192
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
Synthesized clear page handler (26 instructions).
Synthesized copy page handler (46 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
console [ttyS0] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29824k/32768k available (2073k kernel code, 2944k reserved, 308k data, 128k init, 0k highmem)
Calibrating delay loop... 198.65 BogoMIPS (lpj=397312)
Mount-cache hash table entries: 512
net_namespace: 540 bytes
NET: Registered protocol family 16
Switched to high resolution mode on CPU 0
ssb: PCIcore in host mode found
Registering a PCI bus after boot
PCI: Fixing up bridge 0000:00:00.0
PCI: Setting latency timer of device 0000:00:00.0 to 64
PCI: Fixing up device 0000:00:00.0
PCI: Fixing latency timer of device 0000:00:00.0 to 168
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
detected lzma initramfs
initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000300 (irq = 3) is a 16550A
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:b5:3d:40:e6
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=64
Flash device: 0x800000 at 0x1fc00000
bootloader size: 655360
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x000a0000 : "cfe"
0x000a0000-0x007e0000 : "linux"
0x0015d400-0x007e0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=2C0000, len=520000 
0x002c0000-0x007e0000 : "rootfs_data"
0x007e0000-0x00800000 : "nvram"
Registered led device: power
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
Please be patient, while OpenWrt loads ...
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'Netgear WGT634U'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found!
b44: eth0: powering down PHY
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
br-lan: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering forwarding state
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
wlan: trunk
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
wlan: mac acl policy registered
ath_pci: trunk
PCI: Fixing up device 0000:00:01.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
ath_pci: cannot reserve PCI memory region
root@OpenWrt:~# 

root@OpenWrt:~# cat /etc/config/wireless 
config wifi-device  wifi0
        option type     atheros
        option channel  1
        option disabled 0

config wifi-iface
        option device   wifi0
        option network  lan
        option mode     ap
        option ssid     OpenWrt
        option encryption psk2
        option key      '12345678asdfg'



root@OpenWrt:~# wifi
/sbin/wifi: eval: line 1: cannot create /proc/sys/dev/wifi0/countrycode: nonexistent directory
/sbin/wifi: eval: line 1: cannot create /proc/sys/dev/wifi0/outdoor: nonexistent directory
cat: can't open '/proc/sys/dev/wifi0/dev_name': No such file or directory
sysctl: error: 'dev.wifi0.softled' is an unknown key
wlanconfig: ioctl: No such device
enable_atheros(wifi0): Failed to set up ap vif 
root@OpenWrt:~#