dpo/localSettings.yaml

## localSettings.yaml
fileExtensionPreference:
    .tex: 1
    .sty: 2
    .cls: 3
    .bib: 4

# default file extension of backup file (if -w switch is active)
# for example, if your .tex file is called
#       myfile.tex
# and you specify the backupExtension as BACKUP.bak then your
# backup file will be
#       myfileBACKUP.bak
backupExtension: .bak

# only one backup per file:
#   - if onlyOneBackUp is 0 then, as a safety measure,
#     the number on the extension increments by 1 each time:
#
#           myfile.bak0, myfile.bak1, myfile.bak2
#   - if you set onlyOnebackUp to 1, then the backup file will
#     be overwritten each time (not recommended until you trust the script)
onlyOneBackUp: 0

# some users may want a finite number of backup files,
# say at most 3; in which case, they can change this maxNumberOfBackUps.
#
# If maxNumberOfBackUps is set to 0 (or less) then infinitely
# many backups are possible, unless onlyOneBackUp is switched on
maxNumberOfBackUps: 0

# some users may wish to cycle through back up files.
#
# for example, with maxNumberOfBackUps: 4, they may
# wish to delete the oldest back up file, and keep only the most recent.
#
#    copy myfile.bak1 to myfile.bak0
#    copy myfile.bak2 to myfile.bak1
#    copy myfile.bak3 to myfile.bak2
#    copy myfile.bak4 to myfile.bak3
#
# the back up will be written to myfile.bak4
cycleThroughBackUps: 0

# preferences for information displayed in the log file
logFilePreferences:
    showEveryYamlRead: 1
    showAmalgamatedSettings: 0
    showDecorationStartCodeBlockTrace: 0
    showDecorationFinishCodeBlockTrace: 0
    endLogFileWith: '--------------'
    showGitHubInfoFooter: 1
    Dumper:
      Terse: 1
      Indent: 1
      Useqq: 1
      Deparse: 1
      Quotekeys: 0
      Sortkeys: 1
      Pair: " => "

#  verbatim environments specified
#  in this field will not be changed at all!
verbatimEnvironments:
    verbatim: 1
    lstlisting: 1
    minted: 1

#  verbatim commands such as \verb! body !, \lstinline$something else$
verbatimCommands:
    verb: 1
    lstinline: 1

#  no indent blocks (not necessarily verbatim
#  environments) which are marked as %\begin{noindent}
#  or anything else that you detail in the following
noIndentBlock:
    noindent: 1
    cmhtest: 1

# \begin{document} and \end{document} are treated differently
# by latexindent within filecontents environments
fileContentsEnvironments:
    filecontents: 1
    filecontents*: 1

# indent preamble
indentPreamble: 1

# assume no preamble in cls, sty, by default
lookForPreamble:
    .tex: 1
    .sty: 0
    .cls: 0
    .bib: 0

# some preambles can contain \begin and \end statements
# that are not in their 'standard environment block', for example,
# consider the following key = values:
#    preheadhook={\begin{mdframed}[style=myframedstyle]},
#    postfoothook=\end{mdframed},
preambleCommandsBeforeEnvironments: 0

# default value of indentation
defaultIndent: "  "

# remove trailing whitespace from all lines
removeTrailingWhitespace:
    beforeProcessing: 0
    afterProcessing: 1

# name of code blocks that should have their body aligned at ampersand delimiters
lookForAlignDelims:
   tabular:
      delims: 1
      alignDoubleBackSlash: 1
      spacesBeforeDoubleBackSlash: 1
      multiColumnGrouping: 0
      alignRowsWithoutMaxDelims: 1
      spacesBeforeAmpersand: 1
      spacesAfterAmpersand: 1
      justification: left
      alignFinalDoubleBackSlash: 0
      dontMeasure: 0
      delimiterRegEx: '(?<!\\)(&)'
      delimiterJustification: left
      lookForChildCodeBlocks: 1
   tabularx:
      delims: 1
   longtable: 1
   tabu: 1
   array: 1
   matrix: 1
   listabla: 1
   # amsmath
   align: 1
   align*: 1
   alignat: 1
   alignat*: 1
   aligned: 1
   bmatrix: 1
   Bmatrix: 1
   cases: 1
   flalign: 1
   flalign*: 1
   pmatrix: 1
   vmatrix: 1
   Vmatrix: 1
   # mathtools
   cases*: 1
   dcases: 1
   dcases*: 1
   rcases: 1
   rcases*: 1
   drcases: 1
   drcases*: 1
   # nicematrix
   NiceTabular: 1
   NiceMatrix: 1
   pNiceMatrix: 1
   bNiceMatrix: 1
   BNiceMatrix: 1
   vNiceMatrix: 1
   VNiceMatrix: 1
   NiceArray: 1
   pNiceArrayC: 1
   bNiceArrayC: 1
   BNiceArrayC: 1
   vNiceArrayC: 1
   VNiceArrayC: 1
   NiceArrayCwithDelims: 1
   pNiceArrayRC: 1
   bNiceArrayRC: 1
   BNiceArrayRC: 1
   vNiceArrayRC: 1
   VNiceArrayRC: 1
   NiceArrayRCwithDelims: 1
   # tabularray
   tblr: 1
   longtblr: 1
   talltblr: 1

# if you want the script to look for \item commands
# and format it, as follows (for example),
#       \begin{itemize}
#           \item content here
#                 next line is indented
#                 next line is indented
#           \item another item
#       \end{itemize}
# then populate indentAfterItems. See also itemNames
indentAfterItems:
    itemize: 1
    itemize*: 1
    enumerate: 1
    enumerate*: 1
    description: 1
    description*: 1
    list: 1

# if you want to use other names for your items (for example, \part)
# then populate them here; note that you can trick latexindent.pl
# into indenting all kinds of commands (within environments specified in
# indentAfterItems) using this technique.
itemNames:
    item: 1
    myitem: 1

# specialBeginEnd is, by default, mathmode focus, although
# there's no restrictions
specialBeginEnd:
    displayMath:
        begin: '\\\['
        end: '\\\]'
        lookForThis: 1
    inlineMath:
        begin: '(?<!\$)(?<!\\)\$(?!\$)'
        end: '(?<!\\)\$(?!\$)'
        lookForThis: 1
    displayMathTeX:
        begin: '\$\$'
        end: '\$\$'
        lookForThis: 1
    specialBeforeCommand: 0

# if you want to add indentation after
# a heading, such as \part, \chapter, etc
# then populate it in here - you can add
# an indent rule to indentRules if you would
# like something other than defaultIndent
#
# you can also change the level if you like,
# or add your own title command
indentAfterHeadings:
    part:
       indentAfterThisHeading: 0
       level: 1
    chapter:
       indentAfterThisHeading: 0
       level: 2
    section:
       indentAfterThisHeading: 1
       level: 3
    subsection:
       indentAfterThisHeading: 1
       level: 4
    subsection*:
       indentAfterThisHeading: 1
       level: 4
    subsubsection:
       indentAfterThisHeading: 1
       level: 5
    paragraph:
       indentAfterThisHeading: 1
       level: 6
    subparagraph:
       indentAfterThisHeading: 1
       level: 7

# maximum indentation, off by default
maximumIndentation: -1

# if you don't want to have additional indentation
# in a code block, then add it to noAdditionalIndent; note that
# code blocks in this field will inherit
# the *current* level of indentation they just won't
# get any *additional* indentation
noAdditionalIndent:
    widepage: 1
    document: 0

# if you have indent rules for particular code blocks
# then you can populate them in indentRules; for example, you might just want
# to use a space " " or maybe a double tab "\t\t"
indentRules:
   chapter: " "
   section: "  "
   subsection: "  "
   paragraph: "  "
   item: "  "

# set noAdditionalIndent globally for codeblocks
noAdditionalIndentGlobal:
    environments: 0
    commands: 1
    optionalArguments: 0
    mandatoryArguments: 0
    ifElseFi: 0
    items: 0
    keyEqualsValuesBracesBrackets: 0
    namedGroupingBracesBrackets: 0
    UnNamedGroupingBracesBrackets: 0
    specialBeginEnd: 0
    afterHeading: 0
    filecontents: 0

# set indentRules globally for codeblocks; these need
# to be horizontal spaces, if they are to be used
indentRulesGlobal:
    environments: 0
    commands: 0
    optionalArguments: 0
    mandatoryArguments: 0
    ifElseFi: 0
    items: 0
    keyEqualsValuesBracesBrackets: 0
    namedGroupingBracesBrackets: 0
    UnNamedGroupingBracesBrackets: 0
    specialBeginEnd: 0
    afterHeading: 0
    filecontents: 0

# command code block details
commandCodeBlocks:
    roundParenthesesAllowed: 1
    stringsAllowedBetweenArguments:
      -
        amalgamate: 1
      - 'node'
      - 'at'
      - 'to'
      - 'decoration'
      - '\+\+'
      - '\-\-'
      - '\#\#\d'
    commandNameSpecial:
      -
        amalgamate: 1
      - '@ifnextchar\['

# change dos line breaks into unix
dos2unixlinebreaks: 1

# modifyLineBreaks will only be searched if the -m
# switch is active
#
# poly-switch examples:
#
#    BeginStartsOnOwnLine:
#       modify line breaks before a begin statement
#
#       when set to -1, e.g
#               some text some text
#               \begin{myenvironment}
#           will be changed to
#               some text some text \begin{myenvironment}
#       when set to 0, the switch is ignored
#       when set to 1, e.g
#               some text some text \begin{myenvironment}
#           will be changed to
#               some text some text
#               \begin{myenvironment}
#       when set to 2, e.g
#               some text some text \begin{myenvironment}
#           will be changed to
#               some text some text%
#               \begin{myenvironment}
#       when set to 3, e.g
#               some text some text \begin{myenvironment}
#           will be changed to
#               some text some text
#
#               \begin{myenvironment}
#
#    BodyStartsOnOwnLine:
#       modify line breaks before the beginning of the body
#
#       when set to -1, e.g
#               \begin{myenv}
#                   body text body text
#           will be changed to
#               \begin{myenv}body text body text
#       when set to 0, the switch is ignored
#       when set to 1, e.g
#               \begin{myenv}body text body text
#           will be changed to
#               \begin{myenv}
#                   body text body text
#       when set to 2, e.g
#               \begin{myenv}body text body text
#           will be changed to
#               \begin{myenv}%
#                   body text body text
#       when set to 3, e.g
#               \begin{myenv}body text body text
#           will be changed to
#               \begin{myenv}
#
#                   body text body text
#
#    EndStartsOnOwnLine:
#       modify line breaks before the end statement
#
#       when set to -1, e.g
#               some text some text
#               \end{myenvironment}
#           will be changed to
#               some text some text \end{myenvironment}
#       when set to 0, the switch is ignored
#       when set to 1, e.g
#               some text some text \end{myenvironment}
#           will be changed to
#               some text some text
#               \end{myenvironment}
#       when set to 2, e.g
#               some text some text \end{myenvironment}
#           will be changed to
#               some text some text%
#               \end{myenvironment}
#       when set to 3, e.g
#               some text some text \end{myenvironment}
#           will be changed to
#               some text some text
#
#               \end{myenvironment}
#
#    EndFinishesWithLineBreak:
#       modify line breaks after the end statement
#
#       when set to -1, e.g
#               \end{myenvironment}
#               some text some text
#           will be changed to
#                   \end{myenvironment}some text some text
#       when set to 0, the switch is ignored
#       when set to 1, e.g
#               \end{myenvironment}some text some text
#           will be changed to
#                   \end{myenvironment}
#                   some text some text
#       when set to 2, e.g
#               \end{myenvironment}some text some text
#           will be changed to
#                   \end{myenvironment}%
#                   some text some text
#       when set to 3, e.g
#               \end{myenvironment}some text some text
#           will be changed to
#                   \end{myenvironment}
#
#                   some text some text
#
# you can specify settings on a per-name basis
modifyLineBreaks:
    preserveBlankLines: 1
    condenseMultipleBlankLinesInto: 1
    oneSentencePerLine:
        manipulateSentences: 1
        removeSentenceLineBreaks: 1
        multipleSpacesToSingle: 1
        textWrapSentences: 0   # setting to 1 disables main textWrap routine
        sentenceIndent: ""
        sentencesFollow:
            par: 1
            blankLine: 1
            fullStop: 1
            exclamationMark: 1
            questionMark: 1
            rightBrace: 1
            commentOnPreviousLine: 1
            other: 0
        sentencesBeginWith:
            A-Z: 1
            a-z: 0
            other: "\$|\\("
        sentencesEndWith:
            basicFullStop: 0
            betterFullStop: 1
            exclamationMark: 1
            questionMark: 1
            other: 0
    textWrapOptions:
        columns: 0
        multipleSpacesToSingle: 1
        removeBlockLineBreaks: 1
        blocksFollow:
           headings: 1
           commentOnPreviousLine: 1
           par: 1
           blankLine: 1
           verbatim: 1
           filecontents: 1
           other: '\\\]|\\item(?:\h|\[)'      # regex
        blocksBeginWith:
           A-Z: 1
           a-z: 1
           0-9: 0
           other: 0                           # regex
        blocksEndBefore:
           commentOnOwnLine: 1
           verbatim: 1
           filecontents: 1
           other: '\\begin\{|\\\[|\\end\{'    # regex
        huge: overflow                        # forbid mid-word line breaks
        separator: ""
    # poly-switches below here
    environments:
        DBSStartsOnOwnLine: 0
        DBSFinishesWithLineBreak: 1
        BeginStartsOnOwnLine: 1
        BodyStartsOnOwnLine: 2
        EndStartsOnOwnLine: 1
        EndFinishesWithLineBreak: 1
        equation*:
            BeginStartsOnOwnLine: 1
            BodyStartsOnOwnLine: 1
            EndStartsOnOwnLine: 1
            EndFinishesWithLineBreak: 1
    ifElseFi:
        IfStartsOnOwnLine: 0
        BodyStartsOnOwnLine: 0
        OrStartsOnOwnLine: 0
        OrFinishesWithLineBreak: 0
        ElseStartsOnOwnLine: 0
        ElseFinishesWithLineBreak: 0
        FiStartsOnOwnLine: 0
        FiFinishesWithLineBreak: 0
        ifnum:
            IfStartsOnOwnLine: 0
            BodyStartsOnOwnLine: 0
            OrStartsOnOwnLine: 0
            OrFinishesWithLineBreak: 0
            ElseStartsOnOwnLine: 0
            ElseFinishesWithLineBreak: 0
            FiStartsOnOwnLine: 0
            FiFinishesWithLineBreak: 0
    commands:
        CommandStartsOnOwnLine: 0
        CommandNameFinishesWithLineBreak: 0
    optionalArguments:
        LSqBStartsOnOwnLine: 0
        OptArgBodyStartsOnOwnLine: 0
        RSqBStartsOnOwnLine: 0
        RSqBFinishesWithLineBreak: 0
    mandatoryArguments:
        LCuBStartsOnOwnLine: 0
        MandArgBodyStartsOnOwnLine: 0
        RCuBStartsOnOwnLine: 0
        RCuBFinishesWithLineBreak: 0
    keyEqualsValuesBracesBrackets:
        KeyStartsOnOwnLine: 0
        EqualsStartsOnOwnLine: 0
        EqualsFinishesWithLineBreak: 0
    items:
        ItemStartsOnOwnLine: 0
        ItemFinishesWithLineBreak: 1
    namedGroupingBracesBrackets:
        NameStartsOnOwnLine: 0
        NameFinishesWithLineBreak: 0
    specialBeginEnd:
        displayMath:
          SpecialBeginStartsOnOwnLine: 1
          SpecialBodyStartsOnOwnLine: 1
          SpecialEndStartsOnOwnLine: 1
          SpecialEndFinishesWithLineBreak: 1
    verbatim:
        VerbatimBeginStartsOnOwnLine: 0
        VerbatimEndFinishesWithLineBreak: 0

# replacements, only active when either -r or -rr switches are active
replacements:
  -
    amalgamate: 1
  -
    this: 'latexindent.pl'
    that: 'pl.latexindent'
    lookForThis: 0
    when: before

# fineTuning allows you to tweak the internal pattern matching that
# is central to latexindent.pl
fineTuning:
    environments:
      name: '[a-zA-Z@\*0-9_\\]+'
    ifElseFi:
      name: '(?!@?if[a-zA-Z@]*?\{)@?if[a-zA-Z@]*?'
    commands:
      name: '[+a-zA-Z@\*0-9_\:]+?'
    items:
      canBeFollowedBy: '(?:\[[^]]*?\])|(?:<[^>]*?>)'
    keyEqualsValuesBracesBrackets:
      name: '[a-zA-Z@\*0-9_\/.:\#-]+[a-zA-Z@\*0-9_\/.\h\{\}:\#-]*?'
      follow: '(?:(?<!\\)\{)|,|(?:(?<!\\)\[)'
    namedGroupingBracesBrackets:
      name: '[0-9\.a-zA-Z@\*><]+?'
      follow: '\h|\R|\{|\[|\$|\)|\('
    UnNamedGroupingBracesBrackets:
      follow: '\{|\[|,|&|\)|\(|\$'
    arguments:
      before: '(?:#\d\h*;?,?\/?)+|\<.*?\>'
      between: '_|\^|\*'
    trailingComments:
      notPreceededBy: '(?<!\\)'
    modifyLineBreaks:
      doubleBackSlash: '\\\\(?:\h*\[\h*\d+\h*[a-zA-Z]+\h*\])?'
      comma: ','
      betterFullStop: |-
        (?x)                                # ignore spaces in the below
        (?:                                 #
          \.\)                              # .)
          (?!\h*[a-z])                      # not *followed by* a-z
        )                                   #
        |                                   # OR
        (?:                                 #
          (?<!                              # not *preceeded by*
            (?:                             #
              (?:[eE]\.[gG])                # e.g OR E.g OR e.G OR E.G
              |                             #
              (?:[iI]\.[eE])                # i.e OR I.e OR i.E OR I.E
              |                             #
              (?:etc)                       # etc
            )                               #
          )                                 #
        )                                   #
        \.                                  # .
        (?!                                 # not *followed by*
          (?:                               #
            [a-zA-Z0-9-~,]                  #
            |                               #
            \),                             # ),
            |                               #
            \)\.                            # ).
          )                                 #
        )                                   #
	fileExtensionPreference:
	.tex: 1
	.sty: 2
	.cls: 3
	.bib: 4

	# default file extension of backup file (if -w switch is active)
	# for example, if your .tex file is called
	# myfile.tex
	# and you specify the backupExtension as BACKUP.bak then your
	# backup file will be
	# myfileBACKUP.bak
	backupExtension: .bak

	# only one backup per file:
	# - if onlyOneBackUp is 0 then, as a safety measure,
	# the number on the extension increments by 1 each time:
	#
	# myfile.bak0, myfile.bak1, myfile.bak2
	# - if you set onlyOnebackUp to 1, then the backup file will
	# be overwritten each time (not recommended until you trust the script)
	onlyOneBackUp: 0

	# some users may want a finite number of backup files,
	# say at most 3; in which case, they can change this maxNumberOfBackUps.
	#
	# If maxNumberOfBackUps is set to 0 (or less) then infinitely
	# many backups are possible, unless onlyOneBackUp is switched on
	maxNumberOfBackUps: 0

	# some users may wish to cycle through back up files.
	#
	# for example, with maxNumberOfBackUps: 4, they may
	# wish to delete the oldest back up file, and keep only the most recent.
	#
	# copy myfile.bak1 to myfile.bak0
	# copy myfile.bak2 to myfile.bak1
	# copy myfile.bak3 to myfile.bak2
	# copy myfile.bak4 to myfile.bak3
	#
	# the back up will be written to myfile.bak4
	cycleThroughBackUps: 0

	# preferences for information displayed in the log file
	logFilePreferences:
	showEveryYamlRead: 1
	showAmalgamatedSettings: 0
	showDecorationStartCodeBlockTrace: 0
	showDecorationFinishCodeBlockTrace: 0
	endLogFileWith: '--------------'
	showGitHubInfoFooter: 1
	Dumper:
	Terse: 1
	Indent: 1
	Useqq: 1
	Deparse: 1
	Quotekeys: 0
	Sortkeys: 1
	Pair: " => "

	# verbatim environments specified
	# in this field will not be changed at all!
	verbatimEnvironments:
	verbatim: 1
	lstlisting: 1
	minted: 1

	# verbatim commands such as \verb! body !, \lstinline$something else$
	verbatimCommands:
	verb: 1
	lstinline: 1

	# no indent blocks (not necessarily verbatim
	# environments) which are marked as %\begin{noindent}
	# or anything else that you detail in the following
	noIndentBlock:
	noindent: 1
	cmhtest: 1

	# \begin{document} and \end{document} are treated differently
	# by latexindent within filecontents environments
	fileContentsEnvironments:
	filecontents: 1
	filecontents*: 1

	# indent preamble
	indentPreamble: 1

	# assume no preamble in cls, sty, by default
	lookForPreamble:
	.tex: 1
	.sty: 0
	.cls: 0
	.bib: 0

	# some preambles can contain \begin and \end statements
	# that are not in their 'standard environment block', for example,
	# consider the following key = values:
	# preheadhook={\begin{mdframed}[style=myframedstyle]},
	# postfoothook=\end{mdframed},
	preambleCommandsBeforeEnvironments: 0

	# default value of indentation
	defaultIndent: " "

	# remove trailing whitespace from all lines
	removeTrailingWhitespace:
	beforeProcessing: 0
	afterProcessing: 1

	# name of code blocks that should have their body aligned at ampersand delimiters
	lookForAlignDelims:
	tabular:
	delims: 1
	alignDoubleBackSlash: 1
	spacesBeforeDoubleBackSlash: 1
	multiColumnGrouping: 0
	alignRowsWithoutMaxDelims: 1
	spacesBeforeAmpersand: 1
	spacesAfterAmpersand: 1
	justification: left
	alignFinalDoubleBackSlash: 0
	dontMeasure: 0
	delimiterRegEx: '(?<!\\)(&)'
	delimiterJustification: left
	lookForChildCodeBlocks: 1
	tabularx:
	delims: 1
	longtable: 1
	tabu: 1
	array: 1
	matrix: 1
	listabla: 1
	# amsmath
	align: 1
	align*: 1
	alignat: 1
	alignat*: 1
	aligned: 1
	bmatrix: 1
	Bmatrix: 1
	cases: 1
	flalign: 1
	flalign*: 1
	pmatrix: 1
	vmatrix: 1
	Vmatrix: 1
	# mathtools
	cases*: 1
	dcases: 1
	dcases*: 1
	rcases: 1
	rcases*: 1
	drcases: 1
	drcases*: 1
	# nicematrix
	NiceTabular: 1
	NiceMatrix: 1
	pNiceMatrix: 1
	bNiceMatrix: 1
	BNiceMatrix: 1
	vNiceMatrix: 1
	VNiceMatrix: 1
	NiceArray: 1
	pNiceArrayC: 1
	bNiceArrayC: 1
	BNiceArrayC: 1
	vNiceArrayC: 1
	VNiceArrayC: 1
	NiceArrayCwithDelims: 1
	pNiceArrayRC: 1
	bNiceArrayRC: 1
	BNiceArrayRC: 1
	vNiceArrayRC: 1
	VNiceArrayRC: 1
	NiceArrayRCwithDelims: 1
	# tabularray
	tblr: 1
	longtblr: 1
	talltblr: 1

	# if you want the script to look for \item commands
	# and format it, as follows (for example),
	# \begin{itemize}
	# \item content here
	# next line is indented
	# next line is indented
	# \item another item
	# \end{itemize}
	# then populate indentAfterItems. See also itemNames
	indentAfterItems:
	itemize: 1
	itemize*: 1
	enumerate: 1
	enumerate*: 1
	description: 1
	description*: 1
	list: 1

	# if you want to use other names for your items (for example, \part)
	# then populate them here; note that you can trick latexindent.pl
	# into indenting all kinds of commands (within environments specified in
	# indentAfterItems) using this technique.
	itemNames:
	item: 1
	myitem: 1

	# specialBeginEnd is, by default, mathmode focus, although
	# there's no restrictions
	specialBeginEnd:
	displayMath:
	begin: '\\\['
	end: '\\\]'
	lookForThis: 1
	inlineMath:
	begin: '(?<!\$)(?<!\\)\$(?!\$)'
	end: '(?<!\\)\$(?!\$)'
	lookForThis: 1
	displayMathTeX:
	begin: '\$\$'
	end: '\$\$'
	lookForThis: 1
	specialBeforeCommand: 0

	# if you want to add indentation after
	# a heading, such as \part, \chapter, etc
	# then populate it in here - you can add
	# an indent rule to indentRules if you would
	# like something other than defaultIndent
	#
	# you can also change the level if you like,
	# or add your own title command
	indentAfterHeadings:
	part:
	indentAfterThisHeading: 0
	level: 1
	chapter:
	indentAfterThisHeading: 0
	level: 2
	section:
	indentAfterThisHeading: 1
	level: 3
	subsection:
	indentAfterThisHeading: 1
	level: 4
	subsection*:
	indentAfterThisHeading: 1
	level: 4
	subsubsection:
	indentAfterThisHeading: 1
	level: 5
	paragraph:
	indentAfterThisHeading: 1
	level: 6
	subparagraph:
	indentAfterThisHeading: 1
	level: 7

	# maximum indentation, off by default
	maximumIndentation: -1

	# if you don't want to have additional indentation
	# in a code block, then add it to noAdditionalIndent; note that
	# code blocks in this field will inherit
	# the current level of indentation they just won't
	# get any additional indentation
	noAdditionalIndent:
	widepage: 1
	document: 0

	# if you have indent rules for particular code blocks
	# then you can populate them in indentRules; for example, you might just want
	# to use a space " " or maybe a double tab "\t\t"
	indentRules:
	chapter: " "
	section: " "
	subsection: " "
	paragraph: " "
	item: " "

	# set noAdditionalIndent globally for codeblocks
	noAdditionalIndentGlobal:
	environments: 0
	commands: 1
	optionalArguments: 0
	mandatoryArguments: 0
	ifElseFi: 0
	items: 0
	keyEqualsValuesBracesBrackets: 0
	namedGroupingBracesBrackets: 0
	UnNamedGroupingBracesBrackets: 0
	specialBeginEnd: 0
	afterHeading: 0
	filecontents: 0

	# set indentRules globally for codeblocks; these need
	# to be horizontal spaces, if they are to be used
	indentRulesGlobal:
	environments: 0
	commands: 0
	optionalArguments: 0
	mandatoryArguments: 0
	ifElseFi: 0
	items: 0
	keyEqualsValuesBracesBrackets: 0
	namedGroupingBracesBrackets: 0
	UnNamedGroupingBracesBrackets: 0
	specialBeginEnd: 0
	afterHeading: 0
	filecontents: 0

	# command code block details
	commandCodeBlocks:
	roundParenthesesAllowed: 1
	stringsAllowedBetweenArguments:
	-
	amalgamate: 1
	- 'node'
	- 'at'
	- 'to'
	- 'decoration'
	- '\+\+'
	- '\-\-'
	- '\#\#\d'
	commandNameSpecial:
	-
	amalgamate: 1
	- '@ifnextchar\['

	# change dos line breaks into unix
	dos2unixlinebreaks: 1

	# modifyLineBreaks will only be searched if the -m
	# switch is active
	#
	# poly-switch examples:
	#
	# BeginStartsOnOwnLine:
	# modify line breaks before a begin statement
	#
	# when set to -1, e.g
	# some text some text
	# \begin{myenvironment}
	# will be changed to
	# some text some text \begin{myenvironment}
	# when set to 0, the switch is ignored
	# when set to 1, e.g
	# some text some text \begin{myenvironment}
	# will be changed to
	# some text some text
	# \begin{myenvironment}
	# when set to 2, e.g
	# some text some text \begin{myenvironment}
	# will be changed to
	# some text some text%
	# \begin{myenvironment}
	# when set to 3, e.g
	# some text some text \begin{myenvironment}
	# will be changed to
	# some text some text
	#
	# \begin{myenvironment}
	#
	# BodyStartsOnOwnLine:
	# modify line breaks before the beginning of the body
	#
	# when set to -1, e.g
	# \begin{myenv}
	# body text body text
	# will be changed to
	# \begin{myenv}body text body text
	# when set to 0, the switch is ignored
	# when set to 1, e.g
	# \begin{myenv}body text body text
	# will be changed to
	# \begin{myenv}
	# body text body text
	# when set to 2, e.g
	# \begin{myenv}body text body text
	# will be changed to
	# \begin{myenv}%
	# body text body text
	# when set to 3, e.g
	# \begin{myenv}body text body text
	# will be changed to
	# \begin{myenv}
	#
	# body text body text
	#
	# EndStartsOnOwnLine:
	# modify line breaks before the end statement
	#
	# when set to -1, e.g
	# some text some text
	# \end{myenvironment}
	# will be changed to
	# some text some text \end{myenvironment}
	# when set to 0, the switch is ignored
	# when set to 1, e.g
	# some text some text \end{myenvironment}
	# will be changed to
	# some text some text
	# \end{myenvironment}
	# when set to 2, e.g
	# some text some text \end{myenvironment}
	# will be changed to
	# some text some text%
	# \end{myenvironment}
	# when set to 3, e.g
	# some text some text \end{myenvironment}
	# will be changed to
	# some text some text
	#
	# \end{myenvironment}
	#
	# EndFinishesWithLineBreak:
	# modify line breaks after the end statement
	#
	# when set to -1, e.g
	# \end{myenvironment}
	# some text some text
	# will be changed to
	# \end{myenvironment}some text some text
	# when set to 0, the switch is ignored
	# when set to 1, e.g
	# \end{myenvironment}some text some text
	# will be changed to
	# \end{myenvironment}
	# some text some text
	# when set to 2, e.g
	# \end{myenvironment}some text some text
	# will be changed to
	# \end{myenvironment}%
	# some text some text
	# when set to 3, e.g
	# \end{myenvironment}some text some text
	# will be changed to
	# \end{myenvironment}
	#
	# some text some text
	#
	# you can specify settings on a per-name basis
	modifyLineBreaks:
	preserveBlankLines: 1
	condenseMultipleBlankLinesInto: 1
	oneSentencePerLine:
	manipulateSentences: 1
	removeSentenceLineBreaks: 1
	multipleSpacesToSingle: 1
	textWrapSentences: 0 # setting to 1 disables main textWrap routine
	sentenceIndent: ""
	sentencesFollow:
	par: 1
	blankLine: 1
	fullStop: 1
	exclamationMark: 1
	questionMark: 1
	rightBrace: 1
	commentOnPreviousLine: 1
	other: 0
	sentencesBeginWith:
	A-Z: 1
	a-z: 0
	other: "\$\|\\("
	sentencesEndWith:
	basicFullStop: 0
	betterFullStop: 1
	exclamationMark: 1
	questionMark: 1
	other: 0
	textWrapOptions:
	columns: 0
	multipleSpacesToSingle: 1
	removeBlockLineBreaks: 1
	blocksFollow:
	headings: 1
	commentOnPreviousLine: 1
	par: 1
	blankLine: 1
	verbatim: 1
	filecontents: 1
	other: '\\\]\|\\item(?:\h\|\[)' # regex
	blocksBeginWith:
	A-Z: 1
	a-z: 1
	0-9: 0
	other: 0 # regex
	blocksEndBefore:
	commentOnOwnLine: 1
	verbatim: 1
	filecontents: 1
	other: '\\begin\{\|\\\[\|\\end\{' # regex
	huge: overflow # forbid mid-word line breaks
	separator: ""
	# poly-switches below here
	environments:
	DBSStartsOnOwnLine: 0
	DBSFinishesWithLineBreak: 1
	BeginStartsOnOwnLine: 1
	BodyStartsOnOwnLine: 2
	EndStartsOnOwnLine: 1
	EndFinishesWithLineBreak: 1
	equation*:
	BeginStartsOnOwnLine: 1
	BodyStartsOnOwnLine: 1
	EndStartsOnOwnLine: 1
	EndFinishesWithLineBreak: 1
	ifElseFi:
	IfStartsOnOwnLine: 0
	BodyStartsOnOwnLine: 0
	OrStartsOnOwnLine: 0
	OrFinishesWithLineBreak: 0
	ElseStartsOnOwnLine: 0
	ElseFinishesWithLineBreak: 0
	FiStartsOnOwnLine: 0
	FiFinishesWithLineBreak: 0
	ifnum:
	IfStartsOnOwnLine: 0
	BodyStartsOnOwnLine: 0
	OrStartsOnOwnLine: 0
	OrFinishesWithLineBreak: 0
	ElseStartsOnOwnLine: 0
	ElseFinishesWithLineBreak: 0
	FiStartsOnOwnLine: 0
	FiFinishesWithLineBreak: 0
	commands:
	CommandStartsOnOwnLine: 0
	CommandNameFinishesWithLineBreak: 0
	optionalArguments:
	LSqBStartsOnOwnLine: 0
	OptArgBodyStartsOnOwnLine: 0
	RSqBStartsOnOwnLine: 0
	RSqBFinishesWithLineBreak: 0
	mandatoryArguments:
	LCuBStartsOnOwnLine: 0
	MandArgBodyStartsOnOwnLine: 0
	RCuBStartsOnOwnLine: 0
	RCuBFinishesWithLineBreak: 0
	keyEqualsValuesBracesBrackets:
	KeyStartsOnOwnLine: 0
	EqualsStartsOnOwnLine: 0
	EqualsFinishesWithLineBreak: 0
	items:
	ItemStartsOnOwnLine: 0
	ItemFinishesWithLineBreak: 1
	namedGroupingBracesBrackets:
	NameStartsOnOwnLine: 0
	NameFinishesWithLineBreak: 0
	specialBeginEnd:
	displayMath:
	SpecialBeginStartsOnOwnLine: 1
	SpecialBodyStartsOnOwnLine: 1
	SpecialEndStartsOnOwnLine: 1
	SpecialEndFinishesWithLineBreak: 1
	verbatim:
	VerbatimBeginStartsOnOwnLine: 0
	VerbatimEndFinishesWithLineBreak: 0

	# replacements, only active when either -r or -rr switches are active
	replacements:
	-
	amalgamate: 1
	-
	this: 'latexindent.pl'
	that: 'pl.latexindent'
	lookForThis: 0
	when: before

	# fineTuning allows you to tweak the internal pattern matching that
	# is central to latexindent.pl
	fineTuning:
	environments:
	name: '[a-zA-Z@\*0-9_\\]+'
	ifElseFi:
	name: '(?!@?if[a-zA-Z@]?\{)@?if[a-zA-Z@]?'
	commands:
	name: '[+a-zA-Z@\*0-9_\:]+?'
	items:
	canBeFollowedBy: '(?:\[[^]]?\])\|(?:<[^>]?>)'
	keyEqualsValuesBracesBrackets:
	name: '[a-zA-Z@\0-9_\/.:\#-]+[a-zA-Z@\0-9_\/.\h\{\}:\#-]*?'
	follow: '(?:(?<!\\)\{)\|,\|(?:(?<!\\)\[)'
	namedGroupingBracesBrackets:
	name: '[0-9\.a-zA-Z@\*><]+?'
	follow: '\h\|\R\|\{\|\[\|\$\|\)\|\('
	UnNamedGroupingBracesBrackets:
	follow: '\{\|\[\|,\|&\|\)\|\(\|\$'
	arguments:
	before: '(?:#\d\h;?,?\/?)+\|\<.?\>'
	between: '_\|\^\|\*'
	trailingComments:
	notPreceededBy: '(?<!\\)'
	modifyLineBreaks:
	doubleBackSlash: '\\\\(?:\h\[\h\d+\h[a-zA-Z]+\h\])?'
	comma: ','
	betterFullStop: \|-
	(?x) # ignore spaces in the below
	(?: #
	\.\) # .)
	(?!\h[a-z]) # not followed by* a-z
	) #
	\| # OR
	(?: #
	(?<! # not preceeded by
	(?: #
	(?:[eE]\.[gG]) # e.g OR E.g OR e.G OR E.G
	\| #
	(?:[iI]\.[eE]) # i.e OR I.e OR i.E OR I.E
	\| #
	(?:etc) # etc
	) #
	) #
	) #
	\. # .
	(?! # not followed by
	(?: #
	[a-zA-Z0-9-~,] #
	\| #
	\), # ),
	\| #
	\)\. # ).
	) #
	) #