august dvb-t210 'v1' (geniatech t220) - Doesn't pick up any hd channels in ubuntu16.04 (linux kernel 4.4.0) - what's up?
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# Update note: This log was taken with the current official ubuntu universe version of w_scan | |
# might be a bit old, https://launchpad.net/ubuntu/xenial/amd64/w-scan/20141122-1 | |
# cmd was: 'apt-get install -y w-scan' in the 16.04.1 liveCD / liveUSB | |
w_scan -c GB -a 0 -t 3 -q | |
w_scan -c GB -a 0 -t 3 -q | |
WARNING: could not guess your codepage. Falling back to 'UTF-8' | |
WARNING: received garbage data: crc = 0x44096035; expected crc = 0x1d9b310b | |
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1). | |
WARNING: received garbage data: crc = 0x289e0b45; expected crc = 0x7dffffff | |
WARNING: received garbage data: crc = 0x8a5957f4; expected crc = 0xe09b650b | |
WARNING: received garbage data: crc = 0x26c7714d; expected crc = 0x142104e4 | |
WARNING: received garbage data: crc = 0x4595d1fc; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x3f8d5332; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xaff64e06; expected crc = 0x1d7e2f0b | |
WARNING: received garbage data: crc = 0x95cebab6; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x8c97ca33; expected crc = 0xffffff77 | |
WARNING: received garbage data: crc = 0xc7a62aa7; expected crc = 0x1c9bdf0b | |
WARNING: received garbage data: crc = 0x5a86c4b7; expected crc = 0xffffffff | |
WARNING: received garbage data: crc = 0x2255f9a0; expected crc = 0x1d9b800b | |
WARNING: received garbage data: crc = 0x8f8bfb13; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xf7e72164; expected crc = 0xac9b6589 | |
WARNING: received garbage data: crc = 0xb9dc88ca; expected crc = 0x1dce650b | |
WARNING: received garbage data: crc = 0xef292e00; expected crc = 0x20b2276c | |
WARNING: received garbage data: crc = 0x49e243b7; expected crc = 0x1d9b659b | |
WARNING: received garbage data: crc = 0x3387e48b; expected crc = 0x00e01020 | |
WARNING: received garbage data: crc = 0xe2b9ba12; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xda2c648a; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x5053414c; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x98bdadd1; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x765bb28e; expected crc = 0xa0ffffff | |
WARNING: received garbage data: crc = 0x75e1ebfa; expected crc = 0xf95b650b | |
WARNING: received garbage data: crc = 0xae2f87fa; expected crc = 0xffffffff | |
WARNING: received garbage data: crc = 0xfcf185dd; expected crc = 0x1d9be70b | |
WARNING: received garbage data: crc = 0x6d874c8e; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x487bd4ed; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xb43d6488; expected crc = 0x1dcf650b | |
WARNING: received garbage data: crc = 0x0f6bdb67; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x733a6e09; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x171ce006; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x591bbde4; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xb900c559; expected crc = 0x469b650b | |
WARNING: received garbage data: crc = 0x01232f4b; expected crc = 0x2b000000 | |
WARNING: received garbage data: crc = 0x62a225bc; expected crc = 0x20b2e76c | |
WARNING: received garbage data: crc = 0x4406408a; expected crc = 0xecff6eff | |
WARNING: received garbage data: crc = 0xe986f7bf; expected crc = 0x1d9b5a0b | |
WARNING: received garbage data: crc = 0x0826dd3f; expected crc = 0x1d9baa0b | |
WARNING: received garbage data: crc = 0xf3491533; expected crc = 0x1d9bb20b | |
WARNING: received garbage data: crc = 0x8adb2b4d; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x7b428e68; expected crc = 0x1d9b6536 | |
WARNING: received garbage data: crc = 0x78b881e7; expected crc = 0xac9bc7b8 | |
WARNING: received garbage data: crc = 0xcbb8c239; expected crc = 0xff1176ff | |
WARNING: received garbage data: crc = 0xcfa8d4e2; expected crc = 0xffffff28 | |
WARNING: received garbage data: crc = 0xeb3c210c; expected crc = 0xbc656e67 | |
WARNING: received garbage data: crc = 0xba0a4b34; expected crc = 0x9d976572 | |
WARNING: received garbage data: crc = 0xcc0c9c38; expected crc = 0x1a9b650b | |
WARNING: received garbage data: crc = 0x840968ca; expected crc = 0xfd9b6553 | |
WARNING: received garbage data: crc = 0x25e64fb4; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xcb35ca43; expected crc = 0xff93ffff | |
WARNING: received garbage data: crc = 0xe4540512; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x720f98d9; expected crc = 0x1d9bfec4 | |
WARNING: received garbage data: crc = 0xb2a85fce; expected crc = 0x1dfd800b | |
WARNING: received garbage data: crc = 0x3a40db61; expected crc = 0x1d82657e | |
WARNING: received garbage data: crc = 0xf0ea78ce; expected crc = 0xb59b650b | |
WARNING: received garbage data: crc = 0xabd22469; expected crc = 0x1d9b6501 | |
WARNING: received garbage data: crc = 0x678ef517; expected crc = 0xffffb5ff | |
WARNING: received garbage data: crc = 0xee98a5e5; expected crc = 0x1b9b650b | |
WARNING: received garbage data: crc = 0x1becd9ab; expected crc = 0x489f290b | |
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1). | |
WARNING: received garbage data: crc = 0x9d50f5f2; expected crc = 0x1d9b65f7 | |
WARNING: received garbage data: crc = 0x92372220; expected crc = 0x1d06650b | |
WARNING: received garbage data: crc = 0xa45e9321; expected crc = 0x1dfd6519 | |
WARNING: received garbage data: crc = 0x4bd33f3b; expected crc = 0xc09b655a | |
WARNING: received garbage data: crc = 0x283153bf; expected crc = 0x1dfd2e0b | |
WARNING: received garbage data: crc = 0xf6febc43; expected crc = 0x1d3f650b | |
WARNING: received garbage data: crc = 0x7ea91656; expected crc = 0x2e9b090b | |
WARNING: received garbage data: crc = 0x3c9459e1; expected crc = 0xea9b650b | |
WARNING: received garbage data: crc = 0x92649af5; expected crc = 0x719b650b | |
WARNING: received garbage data: crc = 0x1dd2111f; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x5b87ef35; expected crc = 0xea9b650b | |
WARNING: received garbage data: crc = 0xd415d050; expected crc = 0xdf606589 | |
WARNING: received garbage data: crc = 0x3d54def6; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x0a30842d; expected crc = 0x1df7650b | |
WARNING: received garbage data: crc = 0xb7321b3d; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x4d0b8c32; expected crc = 0x1d33650b | |
WARNING: received garbage data: crc = 0xd7e4147a; expected crc = 0x142104e4 | |
WARNING: received garbage data: crc = 0xfc6a0250; expected crc = 0xe5142104 | |
WARNING: received garbage data: crc = 0xc48f8180; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0xd970ad47; expected crc = 0x1d9b090b | |
WARNING: received garbage data: crc = 0xd2ff6fe9; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x66f76c52; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x30cfec04; expected crc = 0x1d0b650b | |
WARNING: received garbage data: crc = 0xba25fd06; expected crc = 0x1d9b6582 | |
WARNING: received garbage data: crc = 0x488cfb8e; expected crc = 0xbcffffff | |
WARNING: received garbage data: crc = 0x40cc2bb5; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x342a435b; expected crc = 0xb59b65d9 | |
WARNING: received garbage data: crc = 0x91e652fa; expected crc = 0x1d9b6532 | |
WARNING: received garbage data: crc = 0x117ed074; expected crc = 0x7b9b440b | |
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1). | |
WARNING: received garbage data: crc = 0x6a819f46; expected crc = 0xb3fffff5 | |
WARNING: received garbage data: crc = 0xeadb09d1; expected crc = 0x1d5865a9 | |
WARNING: received garbage data: crc = 0x094ab38f; expected crc = 0x1d9bab2d | |
WARNING: received garbage data: crc = 0x76e4c05b; expected crc = 0x1d9be50b | |
WARNING: received garbage data: crc = 0x7efffb0e; expected crc = 0x1d9b650b | |
WARNING: received garbage data: crc = 0x5e07c611; expected crc = 0x04e4b019 | |
WARNING: received garbage data: crc = 0x80c3acb3; expected crc = 0x959bf518 | |
WARNING: received garbage data: crc = 0x610e994d; expected crc = 0xd9ee657e | |
WARNING: received garbage data: crc = 0x58bf4ea9; expected crc = 0xffff99ff | |
WARNING: received garbage data: crc = 0x53f3037a; expected crc = 0x1def65d0 | |
WARNING: received garbage data: crc = 0x5386db59; expected crc = 0xac216f0b | |
WARNING: received garbage data: crc = 0xc9edb479; expected crc = 0x1dc3650e | |
tune to: QAM_64 f = 482000 kHz I999B8C34D0T8G32Y0 (9018:12340:20544) (time: 19:05.887) | |
tune to: QPSK f = 538000 kHz I999B8C34D0T8G32Y0 (9018:12340:32787) (time: 19:19.947) | |
tune to: QAM_AUTO f = 538000 kHz I999B8C999D0T999G999Y0 (9018:12340:32787) (time: 19:24.943) (no signal) | |
tune to: QAM_AUTO f = 554000 kHz I999B999C0D0T2G32Y0P0 (9018:12340:40960) (time: 19:31.487) | |
tune to: QAM_AUTO f = 554000 kHz I999B999C999D0T999G999Y0P0 (9018:12340:40960) (time: 19:36.615) (no signal) | |
tune to: QAM_AUTO f = 602000 kHz I999B999C0D0T2G32Y0P0 (9018:12340:45056) (time: 19:41.771) | |
tune to: QAM_AUTO f = 602000 kHz I999B999C999D0T999G999Y0P0 (9018:12340:45056) (time: 19:46.930) (no signal) | |
tune to: QAM_64 f = 498000 kHz I999B8C23D0T8G32Y0 (9018:12340:4163) (time: 19:52.086) | |
tune to: QAM_64 f = 674000 kHz I999B8C23D0T8G32Y0 (9018:12340:4172) (time: 20:05.926) | |
tune to: QAM_AUTO f = 674000 kHz I999B8C999D0T999G999Y0 (9018:12340:4172) (time: 20:10.910) (no signal) | |
tune to: QAM_64 f = 522000 kHz I999B8C23D0T8G32Y0 (9018:12340:8206) (time: 20:17.442) | |
tune to: QAM_AUTO f = 474000 kHz I999B999C0D0T2G32Y0P0 (9018:12340:16515) (time: 20:30.946) | |
tune to: QAM_AUTO f = 474000 kHz I999B999C999D0T999G999Y0P0 (9018:12340:16515) (time: 20:36.102) (no signal) | |
tune to: QAM_64 f = 506000 kHz I999B8C34D0T8G32Y0 (9018:12340:12294) (time: 20:41.258) | |
tune to: QAM_64 f = 530000 kHz I999B8C34D0T8G32Y0 (9018:12340:24640) (time: 20:54.926) | |
tune to: QPSK f = 738000 kHz I999B8C34D0T8G32Y0 (9018:12340:32775) (time: 21:08.930) | |
tune to: QAM_AUTO f = 738000 kHz I999B8C999D0T999G999Y0 (9018:12340:32775) (time: 21:13.894) (no signal) | |
TJC;(null):482000:B8C34D0G32M64T8Y0:T:27500:2211=2:2212=eng@3:0:0:23072:9018:20544:0 | |
Really;(null):482000:B8C34D0G32M64T8Y0:T:27500:2111=2:2112=eng@3,2114=eng:0;2113:0:23712:9018:20544:0 | |
TBN UK;(null):482000:B8C34D0G32M64T8Y0:T:27500:2711=2:2712=eng@3:0:0:23120:9018:20544:0 | |
Food Network;(null):482000:B8C34D0G32M64T8Y0:T:27500:2311=2:2312=eng@3:0:0:23040:9018:20544:0 | |
E4+1;(null):482000:B8C34D0G32M64T8Y0:T:27500:501=2:502=eng@3,504=eng:0;503:0:22336:9018:20544:0 | |
talkSPORT;(null):482000:B8C34D0G32M64T8Y0:T:27500:0:1101=eng@4:0:0:22592:9018:20544:0 | |
Pick;(null):482000:B8C34D0G32M64T8Y0:T:27500:301=2:302=eng@3,304=eng:0;303:0:22208:9018:20544:0 | |
Gems TV;(null):482000:B8C34D0G32M64T8Y0:T:27500:2401=2:2402=eng@3:0:0:24448:9018:20544:0 | |
Create & Craft;(null):482000:B8C34D0G32M64T8Y0:T:27500:2301=2:2302=eng@3:0:0:24384:9018:20544:0 | |
RNIB Connect;(null):482000:B8C34D0G32M64T8Y0:T:27500:0:1201=eng@4:0:0:22624:9018:20544:0 | |
Tiny Pop;(null):482000:B8C34D0G32M64T8Y0:T:27500:651=2:652=eng@3:0:0:23968:9018:20544:0 | |
Challenge;(null):482000:B8C34D0G32M64T8Y0:T:27500:201=2:202=eng@3,204=eng:0;203:0:22226:9018:20544:0 | |
YourTV;(null):482000:B8C34D0G32M64T8Y0:T:27500:2621=2:2622=eng@3:0:0:23216:9018:20544:0 | |
movies4men;(null):482000:B8C34D0G32M64T8Y0:T:27500:2801=2:2802=eng@3:0:0:24016:9018:20544:0 | |
Movie Mix;(null):482000:B8C34D0G32M64T8Y0:T:27500:2121=2:2122=eng@3:0:0:24032:9018:20544:0 | |
Sky News;(null):482000:B8C34D0G32M64T8Y0:T:27500:101=2:102=eng@3,104=eng:0;103:0:22080:9018:20544:0 | |
truTV;(null):482000:B8C34D0G32M64T8Y0:T:27500:2901=2:2902=eng@3:0:0:23152:9018:20544:0 | |
Dave;(null):482000:B8C34D0G32M64T8Y0:T:27500:401=2:402=eng@3,404=eng:0;403:0:22272:9018:20544:0 | |
BBC ONE South;(null):498000:B8C23D0G32M64T8Y0:T:27500:101=2:102=eng@3,106=eng:0;105:0:4163:9018:4163:0 | |
CBeebies;(null):498000:B8C23D0G32M64T8Y0:T:27500:401=2:402=eng@3,406=eng:0;405:0:4672:9018:4163:0 | |
BBC R5L;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1402=eng@3:0:0:5632:9018:4163:0 | |
BBC Wiltshire;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:3402=eng@3:0:0:6273:9018:4163:0 | |
BBC RB 1;(null):498000:B8C23D0G32M64T8Y0:T:27500:901=2:951=eng@3,952=und:0:0:7168:9018:4163:0 | |
BBC R1X;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1802=eng@3:0:0:5888:9018:4163:0 | |
BBC Asian Net.;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1902=eng@3:0:0:5952:9018:4163:0 | |
BBC Parliament;(null):498000:B8C23D0G32M64T8Y0:T:27500:601=2:602=eng@3:0;605:0:4736:9018:4163:0 | |
BBC 6 Music;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1602=eng@3:0:0:5760:9018:4163:0 | |
BBC Berkshire;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:3502=eng@3:0:0:6275:9018:4163:0 | |
BBC Radio 3;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1202=eng@3:0:0:6848:9018:4163:0 | |
BBC TWO;(null):498000:B8C23D0G32M64T8Y0:T:27500:201=2:202=eng@3,206=eng:0;205:0:4287:9018:4163:0 | |
BBC NEWS;(null):498000:B8C23D0G32M64T8Y0:T:27500:501=2:502=eng@3:0;505:0:4352:9018:4163:0 | |
BBC R5SX;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1502=eng@3:0:0:5696:9018:4163:0 | |
BBC Solent;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:3202=eng@3:0:0:6147:9018:4163:0 | |
BBC World Sv.;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:2002=eng@3:0:0:6016:9018:4163:0 | |
BBC Solent Dorset;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:3602=eng@3:0:0:6211:9018:4163:0 | |
BBC Radio 2;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1102=eng@3:0:0:6784:9018:4163:0 | |
CBBC;(null):498000:B8C23D0G32M64T8Y0:T:27500:301=2:302=eng@3,306=eng:0;305:0:4608:9018:4163:0 | |
BBC Sussex;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:3302=eng@3:0:0:6220:9018:4163:0 | |
BBC Radio 4;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1302=eng@3:0:0:6912:9018:4163:0 | |
BBC Radio 4 Ex;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1702=eng@3:0:0:5824:9018:4163:0 | |
BBC Radio 1;(null):498000:B8C23D0G32M64T8Y0:T:27500:0:1002=eng@3:0:0:6720:9018:4163:0 | |
ITV +1;(null):522000:B8C23D0G32M64T8Y0:T:27500:1901=2:1902=eng@4,1903=eng:0;1931:0:8370:9018:8206:0 | |
Channel 4+1;(null):522000:B8C23D0G32M64T8Y0:T:27500:1201=2:1202=eng@4,1203=eng:0;1231:0:8452:9018:8206:0 | |
Channel 5;(null):522000:B8C23D0G32M64T8Y0:T:27500:1601=2:1602=eng@4,1603=eng:0;1631:0:8500:9018:8206:0 | |
ITV;(null):522000:B8C23D0G32M64T8Y0:T:27500:1701=2:1702=eng@4,1703=eng:0;1731:0:8270:9018:8206:0 | |
Film4;(null):522000:B8C23D0G32M64T8Y0:T:27500:1501=2:1502=eng@4,1503=eng:0;1531:0:8385:9018:8206:0 | |
ITV2;(null):522000:B8C23D0G32M64T8Y0:T:27500:1801=2:1802=eng@4,1803=eng:0;1831:0:8325:9018:8206:0 | |
More 4;(null):522000:B8C23D0G32M64T8Y0:T:27500:1401=2:1402=eng@4,1403=eng:0;1431:0:8442:9018:8206:0 | |
ITV4;(null):522000:B8C23D0G32M64T8Y0:T:27500:2001=2:2002=eng@4,2003=eng:0;2031:0:8330:9018:8206:0 | |
Channel 4;(null):522000:B8C23D0G32M64T8Y0:T:27500:1101=2:1102=eng@4,1103=eng:0;1131:0:8384:9018:8206:0 | |
E4;(null):522000:B8C23D0G32M64T8Y0:T:27500:1301=2:1302=eng@4,1303=eng:0;1331:0:8448:9018:8206:0 | |
True Entertainment;(null):506000:B8C34D0G32M64T8Y0:T:27500:6305=2:6306=eng@3,6307=eng:0;6310:0:14608:9018:12294:0 | |
QUEST;(null):506000:B8C34D0G32M64T8Y0:T:27500:6929=2:6930=eng@3,6931=eng:0;6934:0:14498:9018:12294:0 | |
5 USA;(null):506000:B8C34D0G32M64T8Y0:T:27500:6689=2:6690=eng@3,6691=eng:0;6694:0:12992:9018:12294:0 | |
Hochanda;(null):506000:B8C34D0G32M64T8Y0:T:27500:6705=2:6706=eng@3:0:0:14412:9018:12294:0 | |
Blaze;(null):506000:B8C34D0G32M64T8Y0:T:27500:6065=2:6066=eng@3:0:0:14384:9018:12294:0 | |
ITV2 +1;(null):506000:B8C34D0G32M64T8Y0:T:27500:6529=2:6530=eng@3,6531=eng:0;6534:0:15952:9018:12294:0 | |
Absolute Radio;(null):506000:B8C34D0G32M64T8Y0:T:27500:0:6082=eng@3:0:0:14688:9018:12294:0 | |
CBS Reality;(null):506000:B8C34D0G32M64T8Y0:T:27500:6289=2:6290=eng@3,6291=eng:0;6294:0:14448:9018:12294:0 | |
ITV3;(null):506000:B8C34D0G32M64T8Y0:T:27500:6881=2:6882=eng@3,6883=eng:0;6886:0:16048:9018:12294:0 | |
CITV;(null):506000:B8C34D0G32M64T8Y0:T:27500:6833=2:6834=eng@3,6835=eng:0;6838:0:16032:9018:12294:0 | |
ITVBe;(null):506000:B8C34D0G32M64T8Y0:T:27500:6497=2:6498=eng@3,6499=eng:0;6502:0:15856:9018:12294:0 | |
Horror Channel;(null):506000:B8C34D0G32M64T8Y0:T:27500:6129=2:6130=eng@3,6131=eng:0;6134:0:14480:9018:12294:0 | |
My5;(null):506000:B8C34D0G32M64T8Y0:T:27500:6657=2:6658=eng@3,6659=eng:0;6662:0:16080:9018:12294:0 | |
5STAR;(null):506000:B8C34D0G32M64T8Y0:T:27500:6673=2:6674=eng@3,6675=eng:0;6678:0:12928:9018:12294:0 | |
Heart;(null):506000:B8C34D0G32M64T8Y0:T:27500:0:6098=eng@3:0:0:14720:9018:12294:0 | |
QVC;(null):506000:B8C34D0G32M64T8Y0:T:27500:6049=2:6050=eng@3:0:0:13120:9018:12294:0 | |
Capital;(null):506000:B8C34D0G32M64T8Y0:T:27500:0:6114=eng@3:0:0:14752:9018:12294:0 | |
Drama;(null):506000:B8C34D0G32M64T8Y0:T:27500:6609=2:6610=eng@3,6611=eng:0;6614:0:16208:9018:12294:0 | |
Channel 5+1;(null):506000:B8C34D0G32M64T8Y0:T:27500:6865=2:6866=eng@3,6867=eng:0;6870:0:13024:9018:12294:0 | |
Home;(null):530000:B8C34D0G32M64T8Y0:T:27500:2841=2:2842=eng@3,2844=eng:0;2843:0:28000:9018:24640:0 | |
Kiss;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1101=eng@4:0:0:26176:9018:24640:0 | |
Kerrang!;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1301=eng@4:0:0:26304:9018:24640:0 | |
POP;(null):530000:B8C34D0G32M64T8Y0:T:27500:631=2:632=eng@3:0:0:27424:9018:24640:0 | |
Premier Radio;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1601=eng@4:0:0:28160:9018:24640:0 | |
Yesterday;(null):530000:B8C34D0G32M64T8Y0:T:27500:301=2:302=eng@3,304=eng:0;303:0:25792:9018:24640:0 | |
Magic;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1801=eng@4:0:0:26624:9018:24640:0 | |
Classic FM;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1421=eng@4:0:0:26112:9018:24640:0 | |
BT Showcase;(null):530000:B8C34D0G32M64T8Y0:T:27500:2711=2:2712=eng@3,2714=eng:0;2713:0:27360:9018:24640:0 | |
Spike;(null):530000:B8C34D0G32M64T8Y0:T:27500:211=2:212=eng@3,214=eng:0;213:0:25856:9018:24640:0 | |
Dave ja vu;(null):530000:B8C34D0G32M64T8Y0:T:27500:721=2:722=eng@3,724=eng:0;723:0:28096:9018:24640:0 | |
4seven;(null):530000:B8C34D0G32M64T8Y0:T:27500:2621=2:2622=eng@3,2624=eng:0;2623:0:27168:9018:24640:0 | |
The Hits Radio;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1701=eng@4:0:0:26560:9018:24640:0 | |
RT;(null):530000:B8C34D0G32M64T8Y0:T:27500:2101=2:2102=eng@3:0:0:27456:9018:24640:0 | |
4Music;(null):530000:B8C34D0G32M64T8Y0:T:27500:101=2:102=eng@3,104=eng:0;103:0:25664:9018:24640:0 | |
Travel Channel;(null):530000:B8C34D0G32M64T8Y0:T:27500:2401=2:2402=eng@3:0:0:27680:9018:24640:0 | |
KISSTORY;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1901=eng@4:0:0:26752:9018:24640:0 | |
QUEST+1;(null):530000:B8C34D0G32M64T8Y0:T:27500:2921=2:2922=eng@3,2924=eng:0;2923:0:27648:9018:24640:0 | |
Ideal World;(null):530000:B8C34D0G32M64T8Y0:T:27500:501=2:502=eng@3:0:0:25920:9018:24640:0 | |
Smooth Radio;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1401=eng@4:0:0:26368:9018:24640:0 | |
Rocks & Co 1;(null):530000:B8C34D0G32M64T8Y0:T:27500:2611=2:2612=eng@3:0:0:27840:9018:24640:0 | |
KISS FRESH;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1501=eng@4:0:0:27040:9018:24640:0 | |
CBS Action;(null):530000:B8C34D0G32M64T8Y0:T:27500:2941=2:2942=eng@3:0:0:27744:9018:24640:0 | |
QVC Style;(null):530000:B8C34D0G32M64T8Y0:T:27500:521=2:522=eng@3:0:0:28256:9018:24640:0 | |
LBC;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1411=eng@4:0:0:26048:9018:24640:0 | |
heat;(null):530000:B8C34D0G32M64T8Y0:T:27500:0:1201=eng@4:0:0:26240:9018:24640:0 | |
ubuntu@ubuntu:/run/user/999/gvfs/smb-share:server=id.smb.dkr,share=media/sync/thing$ | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux ubuntu 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 4.4.0-31-generic (buildd@lgw01-16) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13) | |
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- | |
[ 0.000000] KERNEL supported cpus: | |
[ 0.000000] Intel GenuineIntel | |
[ 0.000000] AMD AuthenticAMD | |
[ 0.000000] Centaur CentaurHauls | |
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' | |
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' | |
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. | |
[ 0.000000] x86/fpu: Using 'eager' FPU context switches. | |
[ 0.000000] e820: BIOS-provided physical RAM map: | |
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable | |
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable | |
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008842efff] usable | |
[ 0.000000] BIOS-e820: [mem 0x000000008842f000-0x000000008842ffff] ACPI NVS | |
[ 0.000000] BIOS-e820: [mem 0x0000000088430000-0x0000000088449fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x000000008844a000-0x000000008bc27fff] usable | |
[ 0.000000] BIOS-e820: [mem 0x000000008bc28000-0x000000008bc98fff] type 20 | |
[ 0.000000] BIOS-e820: [mem 0x000000008bc99000-0x000000008f27dfff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x000000008f27e000-0x000000008fb99fff] ACPI NVS | |
[ 0.000000] BIOS-e820: [mem 0x000000008fb9a000-0x000000008fbfefff] ACPI data | |
[ 0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable | |
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable | |
[ 0.000000] NX (Execute Disable) protection: active | |
[ 0.000000] efi: EFI v2.40 by American Megatrends | |
[ 0.000000] efi: ESRT=0x8da35a98 ACPI=0x8fbd1000 ACPI 2.0=0x8fbd1000 SMBIOS=0xf05b0 SMBIOS 3.0=0xf05d0 MPS=0xfd7b0 | |
[ 0.000000] esrt: Reserving ESRT space from 0x000000008da35a98 to 0x000000008da35ad0. | |
[ 0.000000] SMBIOS 3.0.0 present. | |
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable | |
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000 | |
[ 0.000000] MTRR default type: write-back | |
[ 0.000000] MTRR fixed ranges enabled: | |
[ 0.000000] 00000-9FFFF write-back | |
[ 0.000000] A0000-BFFFF uncachable | |
[ 0.000000] C0000-FFFFF write-protect | |
[ 0.000000] MTRR variable ranges enabled: | |
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable | |
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable | |
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable | |
[ 0.000000] 3 disabled | |
[ 0.000000] 4 disabled | |
[ 0.000000] 5 disabled | |
[ 0.000000] 6 disabled | |
[ 0.000000] 7 disabled | |
[ 0.000000] 8 disabled | |
[ 0.000000] 9 disabled | |
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT | |
[ 0.000000] e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000 | |
[ 0.000000] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] mapped at [ffff8800000fd9b0] | |
[ 0.000000] Scanning 1 areas for low memory corruption | |
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 | |
[ 0.000000] Using GB pages for direct mapping | |
[ 0.000000] BRK [0x03200000, 0x03200fff] PGTABLE | |
[ 0.000000] BRK [0x03201000, 0x03201fff] PGTABLE | |
[ 0.000000] BRK [0x03202000, 0x03202fff] PGTABLE | |
[ 0.000000] BRK [0x03203000, 0x03203fff] PGTABLE | |
[ 0.000000] BRK [0x03204000, 0x03204fff] PGTABLE | |
[ 0.000000] BRK [0x03205000, 0x03205fff] PGTABLE | |
[ 0.000000] RAMDISK: [mem 0x34d92000-0x366c0fff] | |
[ 0.000000] ACPI: Early table checksum verification disabled | |
[ 0.000000] ACPI: RSDP 0x000000008FBD1000 000024 (v02 ALASKA) | |
[ 0.000000] ACPI: XSDT 0x000000008FBD10B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013) | |
[ 0.000000] ACPI: FACP 0x000000008FBF3C78 00010C (v05 ALASKA A M I 01072009 AMI 00010013) | |
[ 0.000000] ACPI: DSDT 0x000000008FBD1218 022A5E (v02 ALASKA A M I 01072009 INTL 20120913) | |
[ 0.000000] ACPI: FACS 0x000000008FB98F80 000040 | |
[ 0.000000] ACPI: APIC 0x000000008FBF3D88 000068 (v03 ALASKA A M I 01072009 AMI 00010013) | |
[ 0.000000] ACPI: FPDT 0x000000008FBF3DF0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) | |
[ 0.000000] ACPI: FIDT 0x000000008FBF3E38 00009C (v01 ALASKA A M I 01072009 AMI 00010013) | |
[ 0.000000] ACPI: MCFG 0x000000008FBF3ED8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) | |
[ 0.000000] ACPI: HPET 0x000000008FBF3F18 000038 (v01 ALASKA A M I 01072009 AMI. 00050009) | |
[ 0.000000] ACPI: LPIT 0x000000008FBF3F50 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) | |
[ 0.000000] ACPI: SSDT 0x000000008FBF3FE8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) | |
[ 0.000000] ACPI: SSDT 0x000000008FBF4230 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) | |
[ 0.000000] ACPI: SSDT 0x000000008FBF6DE0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) | |
[ 0.000000] ACPI: DBGP 0x000000008FBF79C8 000034 (v01 INTEL 00000000 MSFT 0000005F) | |
[ 0.000000] ACPI: DBG2 0x000000008FBF7A00 000054 (v00 INTEL 00000000 MSFT 0000005F) | |
[ 0.000000] ACPI: SSDT 0x000000008FBF7A58 000619 (v02 INTEL xh_Zumba 00000000 INTL 20120913) | |
[ 0.000000] ACPI: HEST 0x000000008FBFE848 0000A8 (v01 AMI AMI.HEST 00000000 AMI. 00000000) | |
[ 0.000000] ACPI: SSDT 0x000000008FBF80D0 00546C (v02 SaSsdt SaSsdt 00003000 INTL 20120913) | |
[ 0.000000] ACPI: UEFI 0x000000008FBFD540 000042 (v01 00000000 00000000) | |
[ 0.000000] ACPI: SSDT 0x000000008FBFD588 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) | |
[ 0.000000] ACPI: DMAR 0x000000008FBFE400 000070 (v01 INTEL SKL 00000001 INTL 00000001) | |
[ 0.000000] ACPI: SPMI 0x000000008FBFE470 000041 (v05 ALASKA A M I 00000000 AMI. 00000000) | |
[ 0.000000] ACPI: EINJ 0x000000008FBFE4B8 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000) | |
[ 0.000000] ACPI: ERST 0x000000008FBFE5E8 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000) | |
[ 0.000000] ACPI: BERT 0x000000008FBFE818 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000) | |
[ 0.000000] ACPI: Local APIC address 0xfee00000 | |
[ 0.000000] No NUMA configuration found | |
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff] | |
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff] | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] | |
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff] | |
[ 0.000000] Device empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] | |
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] | |
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008842efff] | |
[ 0.000000] node 0: [mem 0x000000008844a000-0x000000008bc27fff] | |
[ 0.000000] node 0: [mem 0x000000008fbff000-0x000000008fbfffff] | |
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff] | |
[ 0.000000] On node 0 totalpages: 2079659 | |
[ 0.000000] DMA zone: 64 pages used for memmap | |
[ 0.000000] DMA zone: 25 pages reserved | |
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0 | |
[ 0.000000] DMA32 zone: 8881 pages used for memmap | |
[ 0.000000] DMA32 zone: 568334 pages, LIFO batch:31 | |
[ 0.000000] Normal zone: 23552 pages used for memmap | |
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31 | |
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808 | |
[ 0.000000] ACPI: Local APIC address 0xfee00000 | |
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 | |
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
[ 0.000000] ACPI: IRQ0 used by override. | |
[ 0.000000] ACPI: IRQ9 used by override. | |
[ 0.000000] Using ACPI (MADT) for SMP configuration information | |
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 | |
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs | |
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8842f000-0x8842ffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x88430000-0x88449fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8bc28000-0x8bc98fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8bc99000-0x8f27dfff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8f27e000-0x8fb99fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8fb9a000-0x8fbfefff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x8fc00000-0xdfffffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] | |
[ 0.000000] e820: [mem 0x8fc00000-0xdfffffff] available for PCI devices | |
[ 0.000000] Booting paravirtualized kernel on bare hardware | |
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns | |
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 | |
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88026fc00000 s98008 r8192 d28968 u1048576 | |
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152 | |
[ 0.000000] pcpu-alloc: [0] 0 1 | |
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2047137 | |
[ 0.000000] Policy zone: Normal | |
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- | |
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area | |
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! | |
[ 0.000000] Memory: 8017264K/8318636K available (8393K kernel code, 1282K rwdata, 3940K rodata, 1480K init, 1292K bss, 301372K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 64. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16 | |
[ 0.000000] spurious 8259A interrupt: IRQ7. | |
[ 0.000000] Console: colour dummy device 80x25 | |
[ 0.000000] console [tty0] enabled | |
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns | |
[ 0.000000] hpet clockevent registered | |
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops | |
[ 0.000000] tsc: Detected 3311.978 MHz processor | |
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6623.95 BogoMIPS (lpj=13247912) | |
[ 0.000023] pid_max: default: 32768 minimum: 301 | |
[ 0.000026] ACPI: Core revision 20150930 | |
[ 0.018136] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210) | |
[ 0.018140] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227) | |
[ 0.018165] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_Zumba) while loading table (20150930/tbxfload-193) | |
[ 0.024381] ACPI Error: 1 table load failures, 6 successful (20150930/tbxfload-214) | |
[ 0.025110] Security Framework initialized | |
[ 0.025111] Yama: becoming mindful. | |
[ 0.025120] AppArmor: AppArmor initialized | |
[ 0.025512] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) | |
[ 0.026730] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
[ 0.027278] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) | |
[ 0.027284] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) | |
[ 0.027440] Initializing cgroup subsys io | |
[ 0.027442] Initializing cgroup subsys memory | |
[ 0.027446] Initializing cgroup subsys devices | |
[ 0.027448] Initializing cgroup subsys freezer | |
[ 0.027449] Initializing cgroup subsys net_cls | |
[ 0.027451] Initializing cgroup subsys perf_event | |
[ 0.027453] Initializing cgroup subsys net_prio | |
[ 0.027454] Initializing cgroup subsys hugetlb | |
[ 0.027455] Initializing cgroup subsys pids | |
[ 0.027473] CPU: Physical Processor ID: 0 | |
[ 0.027474] CPU: Processor Core ID: 0 | |
[ 0.027477] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
[ 0.027478] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) | |
[ 0.028415] mce: CPU supports 8 MCE banks | |
[ 0.028426] CPU0: Thermal monitoring enabled (TM1) | |
[ 0.028433] process: using mwait in idle threads | |
[ 0.028435] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 | |
[ 0.028436] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 | |
[ 0.028687] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000) | |
[ 0.031252] ftrace: allocating 31994 entries in 125 pages | |
[ 0.040758] smpboot: Max logical packages: 1 | |
[ 0.040760] smpboot: APIC(0) Converting physical 0 to logical package 0 | |
[ 0.040763] DMAR: Host address width 39 | |
[ 0.040764] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 | |
[ 0.040770] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da | |
[ 0.040771] DMAR: RMRR base: 0x0000008f031000 end: 0x0000008f050fff | |
[ 0.040773] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 | |
[ 0.040773] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 | |
[ 0.040774] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. | |
[ 0.040775] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. | |
[ 0.042126] DMAR-IR: Enabled IRQ remapping in xapic mode | |
[ 0.042127] x2apic: IRQ remapping doesn't support X2APIC mode | |
[ 0.046187] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
[ 0.085887] TSC deadline timer enabled | |
[ 0.085892] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3) | |
[ 0.085902] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. | |
[ 0.085924] ... version: 4 | |
[ 0.085924] ... bit width: 48 | |
[ 0.085925] ... generic registers: 8 | |
[ 0.085925] ... value mask: 0000ffffffffffff | |
[ 0.085926] ... max period: 0000ffffffffffff | |
[ 0.085926] ... fixed-purpose events: 3 | |
[ 0.085927] ... event mask: 00000007000000ff | |
[ 0.086475] x86: Booting SMP configuration: | |
[ 0.086476] .... node #0, CPUs: #1 | |
[ 0.089829] x86: Booted up 1 node, 2 CPUs | |
[ 0.089832] smpboot: Total of 2 processors activated (13247.91 BogoMIPS) | |
[ 0.089855] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. | |
[ 0.091146] devtmpfs: initialized | |
[ 0.092649] evm: security.selinux | |
[ 0.092650] evm: security.SMACK64 | |
[ 0.092650] evm: security.SMACK64EXEC | |
[ 0.092651] evm: security.SMACK64TRANSMUTE | |
[ 0.092651] evm: security.SMACK64MMAP | |
[ 0.092652] evm: security.ima | |
[ 0.092652] evm: security.capability | |
[ 0.092687] PM: Registering ACPI NVS region [mem 0x8842f000-0x8842ffff] (4096 bytes) | |
[ 0.092688] PM: Registering ACPI NVS region [mem 0x8f27e000-0x8fb99fff] (9551872 bytes) | |
[ 0.092805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.092857] pinctrl core: initialized pinctrl subsystem | |
[ 0.093014] RTC time: 11:45:50, date: 10/31/16 | |
[ 0.093090] NET: Registered protocol family 16 | |
[ 0.101843] cpuidle: using governor ladder | |
[ 0.113851] cpuidle: using governor menu | |
[ 0.113865] PCCT header not found. | |
[ 0.113959] ACPI: bus type PCI registered | |
[ 0.113960] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
[ 0.114021] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
[ 0.114023] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
[ 0.114030] PCI: Using configuration type 1 for base access | |
[ 0.123310] ACPI: Added _OSI(Module Device) | |
[ 0.123311] ACPI: Added _OSI(Processor Device) | |
[ 0.123312] ACPI: Added _OSI(3.0 _SCP Extensions) | |
[ 0.123313] ACPI: Added _OSI(Processor Aggregator Device) | |
[ 0.128753] ACPI: Executed 24 blocks of module-level executable AML code | |
[ 0.133178] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored | |
[ 0.180809] ACPI: Dynamic OEM Table Load: | |
[ 0.180813] ACPI: SSDT 0xFFFF880267017800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) | |
[ 0.181418] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked | |
[ 0.182479] ACPI: Dynamic OEM Table Load: | |
[ 0.182483] ACPI: SSDT 0xFFFF880265DAE800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) | |
[ 0.183559] ACPI: Dynamic OEM Table Load: | |
[ 0.183562] ACPI: SSDT 0xFFFF880265E70000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) | |
[ 0.184331] ACPI: Dynamic OEM Table Load: | |
[ 0.184334] ACPI: SSDT 0xFFFF880265E10A00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) | |
[ 0.185462] ACPI: Interpreter enabled | |
[ 0.185470] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) | |
[ 0.185476] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) | |
[ 0.185491] ACPI: (supports S0 S3 S4 S5) | |
[ 0.185492] ACPI: Using IOAPIC for interrupt routing | |
[ 0.185534] HEST: Table parsing has been initialized. | |
[ 0.185536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
[ 0.186939] ACPI: Power Resource [PG00] (on) | |
[ 0.187241] ACPI: Power Resource [PG01] (on) | |
[ 0.187497] ACPI: Power Resource [PG02] (on) | |
[ 0.189408] ACPI: Power Resource [WRST] (off) | |
[ 0.189655] ACPI: Power Resource [WRST] (off) | |
[ 0.189901] ACPI: Power Resource [WRST] (off) | |
[ 0.190150] ACPI: Power Resource [WRST] (off) | |
[ 0.190395] ACPI: Power Resource [WRST] (off) | |
[ 0.190638] ACPI: Power Resource [WRST] (off) | |
[ 0.190883] ACPI: Power Resource [WRST] (off) | |
[ 0.191124] ACPI: Power Resource [WRST] (off) | |
[ 0.191367] ACPI: Power Resource [WRST] (off) | |
[ 0.191614] ACPI: Power Resource [WRST] (off) | |
[ 0.191916] ACPI: Power Resource [WRST] (off) | |
[ 0.192201] ACPI: Power Resource [WRST] (off) | |
[ 0.192476] ACPI: Power Resource [WRST] (off) | |
[ 0.192727] ACPI: Power Resource [WRST] (off) | |
[ 0.192970] ACPI: Power Resource [WRST] (off) | |
[ 0.193214] ACPI: Power Resource [WRST] (off) | |
[ 0.193456] ACPI: Power Resource [WRST] (off) | |
[ 0.193699] ACPI: Power Resource [WRST] (off) | |
[ 0.193941] ACPI: Power Resource [WRST] (off) | |
[ 0.194185] ACPI: Power Resource [WRST] (off) | |
[ 0.199125] ACPI: Power Resource [FN00] (off) | |
[ 0.199184] ACPI: Power Resource [FN01] (off) | |
[ 0.199240] ACPI: Power Resource [FN02] (off) | |
[ 0.199295] ACPI: Power Resource [FN03] (off) | |
[ 0.199350] ACPI: Power Resource [FN04] (off) | |
[ 0.200141] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | |
[ 0.200145] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] | |
[ 0.201337] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] | |
[ 0.201796] PCI host bridge to bus 0000:00 | |
[ 0.201798] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | |
[ 0.201800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | |
[ 0.201801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | |
[ 0.201802] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] | |
[ 0.201802] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] | |
[ 0.201804] pci_bus 0000:00: root bus resource [bus 00-fe] | |
[ 0.201809] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000 | |
[ 0.202101] pci 0000:00:13.0: [8086:a135] type 00 class 0x000000 | |
[ 0.202122] pci 0000:00:13.0: reg 0x10: [mem 0xde31c000-0xde31cfff 64bit] | |
[ 0.202253] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 | |
[ 0.202277] pci 0000:00:14.0: reg 0x10: [mem 0xde300000-0xde30ffff 64bit] | |
[ 0.202324] pci 0000:00:14.0: PME# supported from D3hot D3cold | |
[ 0.202402] pci 0000:00:14.0: System wakeup disabled by ACPI | |
[ 0.202438] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 | |
[ 0.202460] pci 0000:00:14.2: reg 0x10: [mem 0xde31b000-0xde31bfff 64bit] | |
[ 0.202588] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 | |
[ 0.202619] pci 0000:00:16.0: reg 0x10: [mem 0xde31a000-0xde31afff 64bit] | |
[ 0.202682] pci 0000:00:16.0: PME# supported from D3hot | |
[ 0.202790] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 | |
[ 0.202809] pci 0000:00:17.0: reg 0x10: [mem 0xde314000-0xde315fff] | |
[ 0.202815] pci 0000:00:17.0: reg 0x14: [mem 0xde318000-0xde3180ff] | |
[ 0.202821] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] | |
[ 0.202826] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] | |
[ 0.202832] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] | |
[ 0.202838] pci 0000:00:17.0: reg 0x24: [mem 0xde317000-0xde3177ff] | |
[ 0.202865] pci 0000:00:17.0: PME# supported from D3hot | |
[ 0.202971] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 | |
[ 0.203019] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
[ 0.203099] pci 0000:00:1c.0: System wakeup disabled by ACPI | |
[ 0.203145] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400 | |
[ 0.203192] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold | |
[ 0.203270] pci 0000:00:1c.5: System wakeup disabled by ACPI | |
[ 0.203303] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400 | |
[ 0.203350] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold | |
[ 0.203429] pci 0000:00:1c.6: System wakeup disabled by ACPI | |
[ 0.203469] pci 0000:00:1f.0: [8086:a14a] type 00 class 0x060100 | |
[ 0.203650] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 | |
[ 0.203660] pci 0000:00:1f.2: reg 0x10: [mem 0xde310000-0xde313fff] | |
[ 0.203789] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 | |
[ 0.203842] pci 0000:00:1f.4: reg 0x10: [mem 0xde316000-0xde3160ff 64bit] | |
[ 0.203911] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] | |
[ 0.204124] pci 0000:01:00.0: [1a03:1150] type 01 class 0x060400 | |
[ 0.204228] pci 0000:01:00.0: supports D1 D2 | |
[ 0.204229] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ 0.204286] pci 0000:01:00.0: System wakeup disabled by ACPI | |
[ 0.204315] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' | |
[ 0.204322] pci 0000:00:1c.0: PCI bridge to [bus 01-02] | |
[ 0.204324] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] | |
[ 0.204326] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xde0fffff] | |
[ 0.204384] pci 0000:02:00.0: [1a03:2000] type 00 class 0x030000 | |
[ 0.204420] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xddffffff] | |
[ 0.204431] pci 0000:02:00.0: reg 0x14: [mem 0xde000000-0xde01ffff] | |
[ 0.204442] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f] | |
[ 0.204520] pci 0000:02:00.0: supports D1 D2 | |
[ 0.204521] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
[ 0.204606] pci 0000:01:00.0: PCI bridge to [bus 02] | |
[ 0.204612] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
[ 0.204616] pci 0000:01:00.0: bridge window [mem 0xdc000000-0xde0fffff] | |
[ 0.204707] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 | |
[ 0.204749] pci 0000:03:00.0: reg 0x10: [mem 0xde200000-0xde27ffff] | |
[ 0.204773] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f] | |
[ 0.204785] pci 0000:03:00.0: reg 0x1c: [mem 0xde280000-0xde283fff] | |
[ 0.204881] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold | |
[ 0.204947] pci 0000:03:00.0: System wakeup disabled by ACPI | |
[ 0.210912] pci 0000:00:1c.5: PCI bridge to [bus 03] | |
[ 0.210934] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] | |
[ 0.210946] pci 0000:00:1c.5: bridge window [mem 0xde200000-0xde2fffff] | |
[ 0.211029] pci 0000:04:00.0: [8086:1533] type 00 class 0x020000 | |
[ 0.211071] pci 0000:04:00.0: reg 0x10: [mem 0xde100000-0xde17ffff] | |
[ 0.211095] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc01f] | |
[ 0.211107] pci 0000:04:00.0: reg 0x1c: [mem 0xde180000-0xde183fff] | |
[ 0.211213] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold | |
[ 0.211279] pci 0000:04:00.0: System wakeup disabled by ACPI | |
[ 0.218915] pci 0000:00:1c.6: PCI bridge to [bus 04] | |
[ 0.218938] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] | |
[ 0.218950] pci 0000:00:1c.6: bridge window [mem 0xde100000-0xde1fffff] | |
[ 0.220508] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) | |
[ 0.220563] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) | |
[ 0.220610] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) | |
[ 0.220657] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) | |
[ 0.220704] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) | |
[ 0.220750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7 | |
[ 0.220797] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) | |
[ 0.220843] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7 | |
[ 0.221150] ACPI: Enabled 6 GPEs in block 00 to 7F | |
[ 0.221237] vgaarb: setting as boot device: PCI:0000:02:00.0 | |
[ 0.221239] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none | |
[ 0.221240] vgaarb: loaded | |
[ 0.221240] vgaarb: bridge control possible 0000:02:00.0 | |
[ 0.221397] SCSI subsystem initialized | |
[ 0.221423] libata version 3.00 loaded. | |
[ 0.221435] ACPI: bus type USB registered | |
[ 0.221444] usbcore: registered new interface driver usbfs | |
[ 0.221449] usbcore: registered new interface driver hub | |
[ 0.221455] usbcore: registered new device driver usb | |
[ 0.221555] PCI: Using ACPI for IRQ routing | |
[ 0.249481] PCI: pci_cache_line_size set to 64 bytes | |
[ 0.249555] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] | |
[ 0.249556] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] | |
[ 0.249557] e820: reserve RAM buffer [mem 0x8842f000-0x8bffffff] | |
[ 0.249558] e820: reserve RAM buffer [mem 0x8bc28000-0x8bffffff] | |
[ 0.249559] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff] | |
[ 0.249627] NetLabel: Initializing | |
[ 0.249627] NetLabel: domain hash size = 128 | |
[ 0.249628] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 0.249635] NetLabel: unlabeled traffic allowed by default | |
[ 0.249722] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | |
[ 0.249725] hpet0: 8 comparators, 64-bit 24.000000 MHz counter | |
[ 0.251770] clocksource: Switched to clocksource hpet | |
[ 0.255578] AppArmor: AppArmor Filesystem Enabled | |
[ 0.255612] pnp: PnP ACPI init | |
[ 0.255839] system 00:00: [io 0x0290-0x029f] has been reserved | |
[ 0.255840] system 00:00: [io 0x0290-0x029f] has been reserved | |
[ 0.255841] system 00:00: [io 0x02b0-0x02bf] has been reserved | |
[ 0.255842] system 00:00: [io 0x02c0-0x02cf] has been reserved | |
[ 0.255845] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.256121] pnp 00:01: [dma 0 disabled] | |
[ 0.256148] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) | |
[ 0.256408] pnp 00:02: [dma 0 disabled] | |
[ 0.256432] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) | |
[ 0.256534] system 00:03: [io 0x0680-0x069f] has been reserved | |
[ 0.256535] system 00:03: [io 0xffff] has been reserved | |
[ 0.256536] system 00:03: [io 0xffff] has been reserved | |
[ 0.256537] system 00:03: [io 0xffff] has been reserved | |
[ 0.256538] system 00:03: [io 0x1800-0x18fe] could not be reserved | |
[ 0.256539] system 00:03: [io 0x164e-0x164f] has been reserved | |
[ 0.256541] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.256596] system 00:04: [io 0x0800-0x087f] has been reserved | |
[ 0.256597] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.256610] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) | |
[ 0.256633] system 00:06: [io 0x1854-0x1857] has been reserved | |
[ 0.256634] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
[ 0.256814] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved | |
[ 0.256815] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved | |
[ 0.256816] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved | |
[ 0.256817] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved | |
[ 0.256818] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved | |
[ 0.256820] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved | |
[ 0.256821] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved | |
[ 0.256822] system 00:07: [mem 0xff000000-0xffffffff] has been reserved | |
[ 0.256823] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved | |
[ 0.256824] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved | |
[ 0.256825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.256851] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved | |
[ 0.256852] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved | |
[ 0.256853] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved | |
[ 0.256854] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved | |
[ 0.256855] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved | |
[ 0.256856] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved | |
[ 0.256857] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved | |
[ 0.256858] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.257040] system 00:09: [io 0xff00-0xfffe] has been reserved | |
[ 0.257041] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.257731] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
[ 0.257732] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
[ 0.257733] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved | |
[ 0.257734] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) | |
[ 0.258293] pnp: PnP ACPI: found 11 devices | |
[ 0.266456] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns | |
[ 0.266493] pci 0000:01:00.0: PCI bridge to [bus 02] | |
[ 0.266496] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
[ 0.266501] pci 0000:01:00.0: bridge window [mem 0xdc000000-0xde0fffff] | |
[ 0.266510] pci 0000:00:1c.0: PCI bridge to [bus 01-02] | |
[ 0.266512] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] | |
[ 0.266514] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xde0fffff] | |
[ 0.266519] pci 0000:00:1c.5: PCI bridge to [bus 03] | |
[ 0.266520] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] | |
[ 0.266523] pci 0000:00:1c.5: bridge window [mem 0xde200000-0xde2fffff] | |
[ 0.266527] pci 0000:00:1c.6: PCI bridge to [bus 04] | |
[ 0.266529] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] | |
[ 0.266531] pci 0000:00:1c.6: bridge window [mem 0xde100000-0xde1fffff] | |
[ 0.266536] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | |
[ 0.266537] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | |
[ 0.266539] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | |
[ 0.266540] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] | |
[ 0.266540] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] | |
[ 0.266541] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
[ 0.266542] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xde0fffff] | |
[ 0.266543] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] | |
[ 0.266544] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xde0fffff] | |
[ 0.266545] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] | |
[ 0.266546] pci_bus 0000:03: resource 1 [mem 0xde200000-0xde2fffff] | |
[ 0.266547] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] | |
[ 0.266548] pci_bus 0000:04: resource 1 [mem 0xde100000-0xde1fffff] | |
[ 0.266567] NET: Registered protocol family 2 | |
[ 0.266656] TCP established hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.266737] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
[ 0.266864] TCP: Hash tables configured (established 65536 bind 65536) | |
[ 0.266881] UDP hash table entries: 4096 (order: 5, 131072 bytes) | |
[ 0.266901] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) | |
[ 0.266938] NET: Registered protocol family 1 | |
[ 0.267745] pci 0000:02:00.0: Video device with shadowed ROM | |
[ 0.267788] PCI: CLS 0 bytes, default 64 | |
[ 0.267817] Trying to unpack rootfs image as initramfs... | |
[ 3.906041] Freeing initrd memory: 25788K (ffff880034d92000 - ffff8800366c1000) | |
[ 3.906060] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
[ 3.906061] software IO TLB [mem 0x84071000-0x88071000] (64MB) mapped at [ffff880084071000-ffff880088070fff] | |
[ 3.906182] Scanning for low memory corruption every 60 seconds | |
[ 3.906438] futex hash table entries: 512 (order: 3, 32768 bytes) | |
[ 3.906456] audit: initializing netlink subsys (disabled) | |
[ 3.906466] audit: type=2000 audit(1477914353.868:1): initialized | |
[ 3.906713] Initialise system trusted keyring | |
[ 3.906837] HugeTLB registered 1 GB page size, pre-allocated 0 pages | |
[ 3.906838] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
[ 3.907762] zbud: loaded | |
[ 3.907976] VFS: Disk quotas dquot_6.6.0 | |
[ 3.907996] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
[ 3.908154] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 3.908345] fuse init (API version 7.23) | |
[ 3.908451] Key type big_key registered | |
[ 3.908466] Allocating IMA MOK and blacklist keyrings. | |
[ 3.909235] Key type asymmetric registered | |
[ 3.909238] Asymmetric key parser 'x509' registered | |
[ 3.909259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) | |
[ 3.909310] io scheduler noop registered | |
[ 3.909312] io scheduler deadline registered (default) | |
[ 3.909329] io scheduler cfq registered | |
[ 3.909852] aer 0000:00:1c.0:pcie02: service driver aer loaded | |
[ 3.909873] aer 0000:00:1c.5:pcie02: service driver aer loaded | |
[ 3.909890] aer 0000:00:1c.6:pcie02: service driver aer loaded | |
[ 3.909903] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt | |
[ 3.909904] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt | |
[ 3.909905] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt | |
[ 3.909907] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded | |
[ 3.909912] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt | |
[ 3.909912] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt | |
[ 3.909914] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded | |
[ 3.909920] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt | |
[ 3.909920] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt | |
[ 3.909922] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded | |
[ 3.909926] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
[ 3.909930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
[ 3.909950] efifb: probing for efifb | |
[ 3.909959] efifb: framebuffer at 0xdc000000, mapped to 0xffffc90001000000, using 1920k, total 1920k | |
[ 3.909960] efifb: mode is 800x600x32, linelength=3200, pages=1 | |
[ 3.909960] efifb: scrolling: redraw | |
[ 3.909961] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 | |
[ 3.920428] Console: switching to colour frame buffer device 100x37 | |
[ 3.930671] fb0: EFI VGA frame buffer device | |
[ 3.930676] intel_idle: MWAIT substates: 0x142120 | |
[ 3.930677] intel_idle: v0.4.1 model 0x5E | |
[ 3.930677] intel_idle: lapic_timer_reliable_states 0xffffffff | |
[ 3.930813] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 | |
[ 3.930816] ACPI: Sleep Button [SLPB] | |
[ 3.930836] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
[ 3.930837] ACPI: Power Button [PWRB] | |
[ 3.930858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
[ 3.930859] ACPI: Power Button [PWRF] | |
[ 4.008230] thermal LNXTHERM:00: registered as thermal_zone0 | |
[ 4.008232] ACPI: Thermal Zone [TZ00] (28 C) | |
[ 4.008336] thermal LNXTHERM:01: registered as thermal_zone1 | |
[ 4.008337] ACPI: Thermal Zone [TZ01] (30 C) | |
[ 4.008391] ERST: Error Record Serialization Table (ERST) support is initialized. | |
[ 4.008394] pstore: Registered erst as persistent store backend | |
[ 4.008450] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. | |
[ 4.008657] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled | |
[ 4.029220] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A | |
[ 4.049976] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A | |
[ 4.054862] Linux agpgart interface v0.103 | |
[ 4.057754] brd: module loaded | |
[ 4.059050] loop: module loaded | |
[ 4.059183] libphy: Fixed MDIO Bus: probed | |
[ 4.059184] tun: Universal TUN/TAP device driver, 1.6 | |
[ 4.059185] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 4.059243] PPP generic driver version 2.4.2 | |
[ 4.059315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 4.059318] ehci-pci: EHCI PCI platform driver | |
[ 4.059323] ehci-platform: EHCI generic platform driver | |
[ 4.059330] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 4.059332] ohci-pci: OHCI PCI platform driver | |
[ 4.059337] ohci-platform: OHCI generic platform driver | |
[ 4.059342] uhci_hcd: USB Universal Host Controller Interface driver | |
[ 4.059475] xhci_hcd 0000:00:14.0: xHCI Host Controller | |
[ 4.059479] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
[ 4.060579] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 | |
[ 4.060583] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
[ 4.060646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 4.060647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 4.060648] usb usb1: Product: xHCI Host Controller | |
[ 4.060649] usb usb1: Manufacturer: Linux 4.4.0-31-generic xhci-hcd | |
[ 4.060650] usb usb1: SerialNumber: 0000:00:14.0 | |
[ 4.060751] hub 1-0:1.0: USB hub found | |
[ 4.060772] hub 1-0:1.0: 12 ports detected | |
[ 4.066353] xhci_hcd 0000:00:14.0: xHCI Host Controller | |
[ 4.066355] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
[ 4.066372] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 | |
[ 4.066373] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 4.066374] usb usb2: Product: xHCI Host Controller | |
[ 4.066375] usb usb2: Manufacturer: Linux 4.4.0-31-generic xhci-hcd | |
[ 4.066376] usb usb2: SerialNumber: 0000:00:14.0 | |
[ 4.066495] hub 2-0:1.0: USB hub found | |
[ 4.066512] hub 2-0:1.0: 6 ports detected | |
[ 4.069373] i8042: PNP: No PS/2 controller found. Probing ports directly. | |
[ 4.072158] serio: i8042 KBD port at 0x60,0x64 irq 1 | |
[ 4.072160] serio: i8042 AUX port at 0x60,0x64 irq 12 | |
[ 4.072362] mousedev: PS/2 mouse device common for all mice | |
[ 4.072731] rtc_cmos 00:05: RTC can wake from S4 | |
[ 4.072980] rtc rtc0: invalid alarm value: 2016-10-31 11:45:63 | |
[ 4.073068] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 | |
[ 4.073146] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | |
[ 4.073150] i2c /dev entries driver | |
[ 4.073182] device-mapper: uevent: version 1.0.3 | |
[ 4.073272] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com | |
[ 4.073283] Intel P-state driver initializing. | |
[ 4.073287] intel_pstate: HWP enabled | |
[ 4.073402] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 4.073406] EFI Variables Facility v0.08 2004-May-17 | |
[ 4.077895] NET: Registered protocol family 10 | |
[ 4.078048] NET: Registered protocol family 17 | |
[ 4.078055] Key type dns_resolver registered | |
[ 4.078204] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x6a | |
[ 4.078208] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x6a | |
[ 4.078254] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba | |
[ 4.078486] registered taskstats version 1 | |
[ 4.078502] Loading compiled-in X.509 certificates | |
[ 4.078984] Loaded X.509 cert 'Build time autogenerated kernel key: cfb4d0870811f0d88a3f3259915bd8e83759f99c' | |
[ 4.078995] zswap: loaded using pool lzo/zbud | |
[ 4.080416] Key type trusted registered | |
[ 4.082739] Key type encrypted registered | |
[ 4.082744] AppArmor: AppArmor sha1 policy hashing enabled | |
[ 4.082747] ima: No TPM chip found, activating TPM-bypass! | |
[ 4.082760] evm: HMAC attrs: 0x1 | |
[ 4.083447] Magic number: 4:756:783 | |
[ 4.083645] rtc_cmos 00:05: setting system clock to 2016-10-31 11:45:54 UTC (1477914354) | |
[ 4.083730] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found | |
[ 4.083730] EDD information not available. | |
[ 4.083776] PM: Hibernation image not present or could not be loaded. | |
[ 4.084528] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) | |
[ 4.084529] Write protecting the kernel read-only data: 14336k | |
[ 4.084882] Freeing unused kernel memory: 1836K (ffff880002835000 - ffff880002a00000) | |
[ 4.085129] Freeing unused kernel memory: 156K (ffff880002dd9000 - ffff880002e00000) | |
[ 4.093011] random: systemd-udevd urandom read with 3 bits of entropy available | |
[ 4.126019] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED | |
[ 4.149971] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 4.246551] ahci 0000:00:17.0: version 3.0 | |
[ 4.250755] pps_core: LinuxPPS API ver. 1 registered | |
[ 4.250757] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 4.251445] PTP clock support registered | |
[ 4.252127] dca service started, version 1.12.1 | |
[ 4.254206] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k | |
[ 4.254207] igb: Copyright (c) 2007-2014 Intel Corporation. | |
[ 4.254702] igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session. | |
[ 4.259892] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode | |
[ 4.259895] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst | |
[ 4.264979] [drm] Initialized drm 1.1.0 20060810 | |
[ 4.272851] [drm] AST 2400 detected | |
[ 4.272874] [drm] Analog VGA only | |
[ 4.272891] [drm] dram 1632000000 6 16 02000000 | |
[ 4.272927] [TTM] Zone kernel: Available graphics memory: 4052958 kiB | |
[ 4.272928] [TTM] Zone dma32: Available graphics memory: 2097152 kiB | |
[ 4.272928] [TTM] Initializing pool allocator | |
[ 4.272931] [TTM] Initializing DMA pool allocator | |
[ 4.307828] scsi host0: ahci | |
[ 4.315824] scsi host1: ahci | |
[ 4.320615] scsi host2: ahci | |
[ 4.327824] scsi host3: ahci | |
[ 4.335847] scsi host4: ahci | |
[ 4.343857] scsi host5: ahci | |
[ 4.343905] ata1: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317100 irq 125 | |
[ 4.343906] ata2: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317180 irq 125 | |
[ 4.343908] ata3: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317200 irq 125 | |
[ 4.343909] ata4: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317280 irq 125 | |
[ 4.343911] ata5: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317300 irq 125 | |
[ 4.343912] ata6: SATA max UDMA/133 abar m2048@0xde317000 port 0xde317380 irq 125 | |
[ 4.375991] pps pps0: new PPS source ptp0 | |
[ 4.375995] igb 0000:03:00.0: added PHC on eth0 | |
[ 4.375996] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection | |
[ 4.375998] igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5a:fe:e7 | |
[ 4.376056] igb 0000:03:00.0: eth0: PBA No: 001300-000 | |
[ 4.376058] igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) | |
[ 4.376642] checking generic (dc000000 1e0000) vs hw (dc000000 2000000) | |
[ 4.376644] fb: switching to astdrmfb from EFI VGA | |
[ 4.376658] Console: switching to colour dummy device 80x25 | |
[ 4.376723] fbcon: astdrmfb (fb0) is primary device | |
[ 4.421485] Console: switching to colour frame buffer device 240x67 | |
[ 4.475214] usb 1-3: new high-speed USB device number 2 using xhci_hcd | |
[ 4.475855] ast 0000:02:00.0: fb0: astdrmfb frame buffer device | |
[ 4.486159] pps pps1: new PPS source ptp1 | |
[ 4.486163] igb 0000:04:00.0: added PHC on eth1 | |
[ 4.486164] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection | |
[ 4.486165] igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5a:fe:e8 | |
[ 4.486230] igb 0000:04:00.0: eth1: PBA No: 001300-000 | |
[ 4.486231] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) | |
[ 4.491920] [drm] Initialized ast 0.1.0 20120228 for 0000:02:00.0 on minor 0 | |
[ 4.587414] igb 0000:03:00.0 eno2: renamed from eth0 | |
[ 4.596215] igb 0000:04:00.0 enp4s0: renamed from eth1 | |
[ 4.658004] usb 1-3: New USB device found, idVendor=1f4d, idProduct=d220 | |
[ 4.658006] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 4.658007] usb 1-3: Product: USB Device | |
[ 4.658008] usb 1-3: Manufacturer: Geniatech | |
[ 4.658009] usb 1-3: SerialNumber: 0001 | |
[ 4.668141] ata1: SATA link down (SStatus 0 SControl 300) | |
[ 4.668159] ata2: SATA link down (SStatus 0 SControl 300) | |
[ 4.672159] ata4: SATA link down (SStatus 0 SControl 300) | |
[ 4.672175] ata5: SATA link down (SStatus 0 SControl 300) | |
[ 4.676152] ata3: SATA link down (SStatus 0 SControl 300) | |
[ 4.680148] ata6: SATA link down (SStatus 0 SControl 300) | |
[ 4.827860] usb 1-4: new high-speed USB device number 3 using xhci_hcd | |
[ 4.903892] tsc: Refined TSC clocksource calibration: 3311.978 MHz | |
[ 4.903894] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd7ff1d24, max_idle_ns: 440795374768 ns | |
[ 5.329526] usb 1-4: New USB device found, idVendor=1f4d, idProduct=d220 | |
[ 5.329583] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 5.329621] usb 1-4: Product: USB Device | |
[ 5.329627] usb 1-4: Manufacturer: Geniatech | |
[ 5.329628] usb 1-4: SerialNumber: 0001 | |
[ 5.455915] usb 1-11: new full-speed USB device number 4 using xhci_hcd | |
[ 5.593701] usb 1-11: New USB device found, idVendor=1997, idProduct=7b03 | |
[ 5.593704] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 5.593705] usb 1-11: Product: Multimedia Air Mouse Keyboard | |
[ 5.593706] usb 1-11: Manufacturer: | |
[ 5.603306] usbcore: registered new interface driver usbhid | |
[ 5.603308] usbhid: USB HID core driver | |
[ 5.604943] input: Multimedia Air Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:1997:7B03.0001/input/input6 | |
[ 5.660312] hid-generic 0003:1997:7B03.0001: input,hidraw0: USB HID v1.10 Keyboard [ Multimedia Air Mouse Keyboard] on usb-0000:00:14.0-11/input0 | |
[ 5.660471] input: Multimedia Air Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:1997:7B03.0002/input/input7 | |
[ 5.717045] hid-generic 0003:1997:7B03.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [ Multimedia Air Mouse Keyboard] on usb-0000:00:14.0-11/input1 | |
[ 5.760009] usb 1-12: new high-speed USB device number 5 using xhci_hcd | |
[ 5.889819] usb 1-12: New USB device found, idVendor=0781, idProduct=5567 | |
[ 5.889821] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 5.889822] usb 1-12: Product: Cruzer Blade | |
[ 5.889823] usb 1-12: Manufacturer: SanDisk | |
[ 5.889824] usb 1-12: SerialNumber: 200608778107F6227BC0 | |
[ 5.894037] usb-storage 1-12:1.0: USB Mass Storage device detected | |
[ 5.894108] scsi host6: usb-storage 1-12:1.0 | |
[ 5.894150] usbcore: registered new interface driver usb-storage | |
[ 5.894906] usbcore: registered new interface driver uas | |
[ 5.904380] clocksource: Switched to clocksource tsc | |
[ 6.892798] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2 | |
[ 6.893503] sd 6:0:0:0: Attached scsi generic sg0 type 0 | |
[ 6.893607] sd 6:0:0:0: [sda] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB) | |
[ 6.894427] sd 6:0:0:0: [sda] Write Protect is off | |
[ 6.894429] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00 | |
[ 6.894808] sd 6:0:0:0: [sda] No Caching mode page found | |
[ 6.894811] sd 6:0:0:0: [sda] Assuming drive cache: write through | |
[ 6.897279] sda: sda1 sda2 | |
[ 6.898190] sd 6:0:0:0: [sda] Attached SCSI removable disk | |
[ 7.513732] ISO 9660 Extensions: Microsoft Joliet Level 3 | |
[ 7.516158] ISO 9660 Extensions: RRIP_1991A | |
[ 8.506823] random: nonblocking pool is initialized | |
[ 12.392115] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) | |
[ 12.392180] systemd[1]: Detected architecture x86-64. | |
[ 12.392250] systemd[1]: Set hostname to <ubuntu>. | |
[ 12.392377] systemd[1]: Initializing machine ID from random generator. | |
[ 12.547440] systemd[1]: Listening on Journal Socket (/dev/log). | |
[ 12.547483] systemd[1]: Listening on LVM2 poll daemon socket. | |
[ 12.547534] systemd[1]: Created slice User and Session Slice. | |
[ 12.547555] systemd[1]: Listening on Journal Socket. | |
[ 12.547580] systemd[1]: Listening on udev Kernel Socket. | |
[ 12.547596] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
[ 12.547631] systemd[1]: Listening on Journal Audit Socket. | |
[ 12.547637] systemd[1]: Reached target User and Group Name Lookups. | |
[ 12.547654] systemd[1]: Listening on udev Control Socket. | |
[ 12.547660] systemd[1]: Reached target Swap. | |
[ 12.547664] systemd[1]: Reached target Remote File Systems (Pre). | |
[ 12.547668] systemd[1]: Reached target Remote File Systems. | |
[ 12.547776] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ 12.547783] systemd[1]: Reached target Encrypted Volumes. | |
[ 12.547794] systemd[1]: Listening on Syslog Socket. | |
[ 12.547820] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ 12.547836] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ 12.547846] systemd[1]: Listening on LVM2 metadata daemon socket. | |
[ 12.547883] systemd[1]: Created slice System Slice. | |
[ 12.560183] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
[ 12.560622] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
[ 12.561010] systemd[1]: Starting Journal Service... | |
[ 12.561027] systemd[1]: Reached target Slices. | |
[ 12.561330] systemd[1]: Started Read required files in advance. | |
[ 12.561751] systemd[1]: Started Braille Device Support. | |
[ 12.562051] systemd[1]: Mounting POSIX Message Queue File System... | |
[ 12.562299] systemd[1]: Starting Uncomplicated firewall... | |
[ 12.562713] systemd[1]: Mounting Huge Pages File System... | |
[ 12.564597] systemd[1]: Starting Remount Root and Kernel File Systems... | |
[ 12.565319] systemd[1]: Starting Load Kernel Modules... | |
[ 12.639941] systemd[1]: Starting Set console keymap... | |
[ 12.640499] systemd[1]: Mounting Debug File System... | |
[ 12.641409] systemd[1]: Mounted POSIX Message Queue File System. | |
[ 12.641459] systemd[1]: Mounted Huge Pages File System. | |
[ 12.641768] systemd[1]: Mounted Debug File System. | |
[ 12.641959] systemd[1]: Started Remount Root and Kernel File Systems. | |
[ 12.655605] systemd[1]: Starting Load/Save Random Seed... | |
[ 12.656258] systemd[1]: Starting udev Coldplug all Devices... | |
[ 12.663909] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
[ 12.664055] systemd[1]: Started Load/Save Random Seed. | |
[ 12.664380] systemd[1]: Starting Create Static Device Nodes in /dev... | |
[ 12.712584] systemd[1]: Started Uncomplicated firewall. | |
[ 12.786669] systemd[1]: Started Create Static Device Nodes in /dev. | |
[ 12.799992] systemd[1]: Starting udev Kernel Device Manager... | |
[ 12.826430] systemd[1]: Started udev Coldplug all Devices. | |
[ 12.874966] systemd[1]: Started Journal Service. | |
[ 12.969695] lp: driver loaded but no devices found | |
[ 12.979519] systemd-journald[2396]: Received request to flush runtime journal from PID 1 | |
[ 12.988507] ppdev: user-space parallel port driver | |
[ 13.213345] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
[ 13.304229] Bluetooth: Core ver 2.21 | |
[ 13.304254] NET: Registered protocol family 31 | |
[ 13.304255] Bluetooth: HCI device and connection manager initialized | |
[ 13.304257] Bluetooth: HCI socket layer initialized | |
[ 13.304259] Bluetooth: L2CAP socket layer initialized | |
[ 13.304262] Bluetooth: SCO socket layer initialized | |
[ 13.312429] ipmi message handler version 39.2 | |
[ 13.318903] ipmi_si IPI0001:00: ipmi_si: probing via ACPI | |
[ 13.318919] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 | |
[ 13.318920] ipmi_si: Adding ACPI-specified kcs state machine | |
[ 13.318933] IPMI System Interface driver. | |
[ 13.318945] ipmi_si: probing via SMBIOS | |
[ 13.318946] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 | |
[ 13.318947] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface | |
[ 13.318948] ipmi_si: probing via SPMI | |
[ 13.318949] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 | |
[ 13.318950] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface | |
[ 13.318951] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 | |
[ 13.336138] Bluetooth: HCI UART driver ver 2.3 | |
[ 13.336140] Bluetooth: HCI UART protocol H4 registered | |
[ 13.336141] Bluetooth: HCI UART protocol BCSP registered | |
[ 13.336141] Bluetooth: HCI UART protocol LL registered | |
[ 13.336142] Bluetooth: HCI UART protocol ATH3K registered | |
[ 13.336143] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
[ 13.336159] Bluetooth: HCI UART protocol Intel registered | |
[ 13.336166] Bluetooth: HCI UART protocol BCM registered | |
[ 13.336167] Bluetooth: HCI UART protocol QCA registered | |
[ 13.872882] SSE version of gcm_enc/dec engaged. | |
[ 13.883821] usb 1-11: Warning! Unlikely big volume range (=65535), cval->res is probably wrong. | |
[ 13.883824] usb 1-11: [2] FU [Mic Capture Volume] ch = 1, val = -32768/32767/1 | |
[ 13.883971] usbcore: registered new interface driver snd-usb-audio | |
[ 14.047497] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20) | |
[ 14.047503] ipmi_si IPI0001:00: IPMI kcs interface initialized | |
[ 14.068470] IPMI SSIF Interface driver | |
[ 14.214635] intel_rapl: Found RAPL domain package | |
[ 14.214637] intel_rapl: Found RAPL domain core | |
[ 14.214638] intel_rapl: Found RAPL domain dram | |
[ 15.121280] dw2102: su3000_identify_state | |
[ 15.121282] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[ 15.121285] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[ 15.121577] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[ 15.121923] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[ 15.127712] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[ 15.440386] tda18271 1-0060: creating new instance | |
[ 15.444580] TDA18271HD/C2 detected @ 1-0060 | |
[ 15.690215] dw2102: Attached TDA18271HD/CXD2820R! | |
[ 15.690218] usb 1-3: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... | |
[ 15.739843] Registered IR keymap rc-su3000 | |
[ 15.739896] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input8 | |
[ 15.741818] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0 | |
[ 15.741819] dvb-usb: schedule remote query interval to 150 msecs. | |
[ 15.741820] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 15.741821] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[ 15.741834] dw2102: su3000_identify_state | |
[ 15.741834] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[ 15.741836] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[ 15.742192] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[ 15.742506] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[ 15.746663] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[ 15.800753] tda18271 2-0060: creating new instance | |
[ 15.804979] TDA18271HD/C2 detected @ 2-0060 | |
[ 16.044121] dw2102: Attached TDA18271HD/CXD2820R! | |
[ 16.044125] usb 1-4: DVB: registering adapter 1 frontend 0 (Sony CXD2820R)... | |
[ 16.044300] Registered IR keymap rc-su3000 | |
[ 16.044349] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1/input9 | |
[ 16.044763] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1 | |
[ 16.044765] dvb-usb: schedule remote query interval to 150 msecs. | |
[ 16.044767] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 16.044768] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[ 16.044783] usbcore: registered new interface driver dw2102 | |
[ 16.425997] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready | |
[ 16.452842] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready | |
[ 16.455581] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready | |
[ 16.479889] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready | |
[ 17.919872] dvb-usb: recv bulk message failed: -110 | |
[ 17.919875] dw2102: i2c transfer failed. | |
[ 18.199920] dvb-usb: recv bulk message failed: -110 | |
[ 18.199922] dw2102: i2c transfer failed. | |
[ 20.284413] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX | |
[ 20.284668] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready | |
[ 23.841167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
[ 23.841169] Bluetooth: BNEP filters: protocol multicast | |
[ 23.841172] Bluetooth: BNEP socket layer initialized | |
[ 676.782305] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Down | |
[ 694.982898] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX | |
[ 714.671692] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Down | |
[ 719.610812] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX | |
[ 719.611090] IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready | |
[ 740.496017] igb 0000:03:00.0 eno2: igb: eno2 NIC Link is Down | |
[ 752.903302] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX | |
[ 1329.397711] perf interrupt took too long (2927 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 | |
[ 2457.798436] usb 1-9: new high-speed USB device number 6 using xhci_hcd | |
[ 2457.971149] usb 1-9: New USB device found, idVendor=046b, idProduct=ff01 | |
[ 2457.971156] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 2457.971161] usb 1-9: Product: Virtual Hub | |
[ 2457.971164] usb 1-9: Manufacturer: American Megatrends Inc. | |
[ 2457.971167] usb 1-9: SerialNumber: serial | |
[ 2457.972589] hub 1-9:1.0: USB hub found | |
[ 2457.972817] hub 1-9:1.0: 5 ports detected | |
[ 2458.262435] usb 1-9.1: new high-speed USB device number 7 using xhci_hcd | |
[ 2458.371764] usb 1-9.1: New USB device found, idVendor=046b, idProduct=ff20 | |
[ 2458.371772] usb 1-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 2458.371776] usb 1-9.1: Product: Virtual Cdrom Device | |
[ 2458.371780] usb 1-9.1: Manufacturer: American Megatrends Inc. | |
[ 2458.371783] usb 1-9.1: SerialNumber: AAAABBBBCCCC1 | |
[ 2458.373878] usb-storage 1-9.1:1.0: USB Mass Storage device detected | |
[ 2458.375276] scsi host7: usb-storage 1-9.1:1.0 | |
[ 2458.466441] usb 1-9.2: new high-speed USB device number 8 using xhci_hcd | |
[ 2458.575716] usb 1-9.2: New USB device found, idVendor=046b, idProduct=ff40 | |
[ 2458.575734] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 2458.575737] usb 1-9.2: Product: Virtual Floppy Device | |
[ 2458.575738] usb 1-9.2: Manufacturer: American Megatrends Inc. | |
[ 2458.575740] usb 1-9.2: SerialNumber: AAAABBBBCCCC2 | |
[ 2458.576577] usb-storage 1-9.2:1.0: USB Mass Storage device detected | |
[ 2458.577748] usb-storage 1-9.2:1.0: Quirks match for vid 046b pid ff40: 200 | |
[ 2458.577801] scsi host8: usb-storage 1-9.2:1.0 | |
[ 2458.666446] usb 1-9.3: new high-speed USB device number 9 using xhci_hcd | |
[ 2458.775980] usb 1-9.3: New USB device found, idVendor=046b, idProduct=ff31 | |
[ 2458.775988] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 2458.775992] usb 1-9.3: Product: Virtual HardDisk Device | |
[ 2458.775995] usb 1-9.3: Manufacturer: American Megatrends Inc. | |
[ 2458.775998] usb 1-9.3: SerialNumber: AAAABBBBCCCC3 | |
[ 2458.777174] usb-storage 1-9.3:1.0: USB Mass Storage device detected | |
[ 2458.779736] scsi host9: usb-storage 1-9.3:1.0 | |
[ 2458.870422] usb 1-9.4: new low-speed USB device number 10 using xhci_hcd | |
[ 2458.982604] usb 1-9.4: New USB device found, idVendor=046b, idProduct=ff10 | |
[ 2458.982612] usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 2458.982616] usb 1-9.4: Product: Virtual Keyboard and Mouse | |
[ 2458.982620] usb 1-9.4: Manufacturer: American Megatrends Inc. | |
[ 2458.985956] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/0003:046B:FF10.0003/input/input10 | |
[ 2459.039229] hid-generic 0003:046B:FF10.0003: input,hidraw2: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-9.4/input0 | |
[ 2459.041582] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.1/0003:046B:FF10.0004/input/input11 | |
[ 2459.095477] hid-generic 0003:046B:FF10.0004: input,hidraw3: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-9.4/input1 | |
[ 2459.375179] scsi 7:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS | |
[ 2459.380742] sr 7:0:0:0: [sr0] scsi-1 drive | |
[ 2459.380748] cdrom: Uniform CD-ROM driver Revision: 3.20 | |
[ 2459.381030] sr 7:0:0:0: Attached scsi CD-ROM sr0 | |
[ 2459.381181] sr 7:0:0:0: Attached scsi generic sg1 type 5 | |
[ 2459.575456] scsi 8:0:0:0: Direct-Access AMI Virtual Floppy0 1.00 PQ: 0 ANSI: 0 CCS | |
[ 2459.578421] sd 8:0:0:0: Attached scsi generic sg2 type 0 | |
[ 2459.580019] sd 8:0:0:0: [sdb] Attached SCSI removable disk | |
[ 2459.779477] scsi 9:0:0:0: Direct-Access AMI Virtual HDisk0 1.00 PQ: 0 ANSI: 0 CCS | |
[ 2459.780014] sd 9:0:0:0: Attached scsi generic sg3 type 0 | |
[ 2459.784213] sd 9:0:0:0: [sdc] Attached SCSI removable disk | |
[ 2841.839360] perf interrupt took too long (5672 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 | |
[ 3008.121348] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[ 3008.130363] tda18271: performing RF tracking filter calibration | |
[ 3010.652563] tda18271: RF tracking filter calibration complete | |
[ 3018.810646] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 3045.968042] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[ 3047.698442] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 3058.254029] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[ 3079.918252] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 3523.075601] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[ 4689.299446] perf interrupt took too long (10836 > 10000), lowering kernel.perf_event_max_sample_rate to 12500 | |
[ 5077.239989] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[ 8248.597143] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[ 8952.757731] perf interrupt took too long (20782 > 20000), lowering kernel.perf_event_max_sample_rate to 6250 | |
[ 9312.626232] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[11905.263190] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[11940.551957] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[11940.562367] tda18271: performing RF tracking filter calibration | |
[11943.098038] tda18271: RF tracking filter calibration complete | |
[13167.437761] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[13308.711517] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[13798.733136] usb 1-4: USB disconnect, device number 3 | |
[13798.758887] tda18271 2-0060: destroying instance | |
[13798.762890] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[13882.098094] usb 1-4: new high-speed USB device number 11 using xhci_hcd | |
[13882.227388] usb 1-4: New USB device found, idVendor=1f4d, idProduct=d220 | |
[13882.227396] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[13882.227401] usb 1-4: Product: USB Device | |
[13882.227404] usb 1-4: Manufacturer: Geniatech | |
[13882.227407] usb 1-4: SerialNumber: 0001 | |
[13882.228696] dw2102: su3000_identify_state | |
[13882.228703] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[13882.228712] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[13882.231529] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[13882.231655] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[13882.235799] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[13882.291879] tda18271 2-0060: creating new instance | |
[13882.296684] TDA18271HD/C2 detected @ 2-0060 | |
[13882.535936] dw2102: Attached TDA18271HD/CXD2820R! | |
[13882.535950] usb 1-4: DVB: registering adapter 1 frontend 0 (Sony CXD2820R)... | |
[13882.536398] Registered IR keymap rc-su3000 | |
[13882.536624] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1/input12 | |
[13882.537062] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1 | |
[13882.537067] dvb-usb: schedule remote query interval to 150 msecs. | |
[13882.537072] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[13882.537076] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[13884.686136] dvb-usb: recv bulk message failed: -110 | |
[13884.686144] dw2102: i2c transfer failed. | |
[13887.358543] usb 1-3: USB disconnect, device number 2 | |
[13887.382197] tda18271 1-0060: destroying instance | |
[13887.382605] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[13901.483006] usb 1-4: USB disconnect, device number 11 | |
[13901.508780] tda18271 2-0060: destroying instance | |
[13901.509568] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[13906.122285] usb 1-3: new high-speed USB device number 12 using xhci_hcd | |
[13906.251447] usb 1-3: New USB device found, idVendor=1f4d, idProduct=d220 | |
[13906.251454] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[13906.251459] usb 1-3: Product: USB Device | |
[13906.251462] usb 1-3: Manufacturer: Geniatech | |
[13906.251465] usb 1-3: SerialNumber: 0001 | |
[13906.252503] dw2102: su3000_identify_state | |
[13906.252509] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[13906.252518] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[13906.254271] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[13906.254530] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[13906.259405] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[13906.314963] tda18271 1-0060: creating new instance | |
[13906.319766] TDA18271HD/C2 detected @ 1-0060 | |
[13906.559688] dw2102: Attached TDA18271HD/CXD2820R! | |
[13906.559703] usb 1-3: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... | |
[13906.560390] Registered IR keymap rc-su3000 | |
[13906.560572] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input13 | |
[13906.560935] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0 | |
[13906.560940] dvb-usb: schedule remote query interval to 150 msecs. | |
[13906.560946] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[13906.560949] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[13908.710270] dvb-usb: recv bulk message failed: -110 | |
[13908.710278] dw2102: i2c transfer failed. | |
[13927.347723] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[13927.355733] tda18271: performing RF tracking filter calibration | |
[13929.876092] tda18271: RF tracking filter calibration complete | |
[15207.772519] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[15657.078549] usb 1-3: USB disconnect, device number 12 | |
[15657.099617] tda18271 1-0060: destroying instance | |
[15657.099857] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[15676.695684] usb 1-4: new high-speed USB device number 13 using xhci_hcd | |
[15676.824940] usb 1-4: New USB device found, idVendor=1f4d, idProduct=d220 | |
[15676.824947] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[15676.824952] usb 1-4: Product: USB Device | |
[15676.824955] usb 1-4: Manufacturer: Geniatech | |
[15676.824958] usb 1-4: SerialNumber: 0001 | |
[15676.826389] dw2102: su3000_identify_state | |
[15676.826395] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[15676.826402] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[15676.828618] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[15676.828861] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[15676.833821] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[15676.888877] tda18271 1-0060: creating new instance | |
[15676.893700] TDA18271HD/C2 detected @ 1-0060 | |
[15677.133798] dw2102: Attached TDA18271HD/CXD2820R! | |
[15677.133814] usb 1-4: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... | |
[15677.134500] Registered IR keymap rc-su3000 | |
[15677.134687] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc0/input14 | |
[15677.135064] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc0 | |
[15677.135068] dvb-usb: schedule remote query interval to 150 msecs. | |
[15677.135073] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[15677.135077] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[15679.283668] dvb-usb: recv bulk message failed: -110 | |
[15679.283677] dw2102: i2c transfer failed. | |
[15711.006556] usb 1-4: USB disconnect, device number 13 | |
[15711.032172] tda18271 1-0060: destroying instance | |
[15711.032681] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[15714.739921] usb 1-3: new high-speed USB device number 14 using xhci_hcd | |
[15714.869241] usb 1-3: New USB device found, idVendor=1f4d, idProduct=d220 | |
[15714.869249] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[15714.869253] usb 1-3: Product: USB Device | |
[15714.869257] usb 1-3: Manufacturer: Geniatech | |
[15714.869260] usb 1-3: SerialNumber: 0001 | |
[15714.870687] dw2102: su3000_identify_state | |
[15714.870693] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[15714.870701] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[15714.872914] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[15714.873140] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[15714.878050] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[15714.933489] tda18271 1-0060: creating new instance | |
[15714.938474] TDA18271HD/C2 detected @ 1-0060 | |
[15715.178075] dw2102: Attached TDA18271HD/CXD2820R! | |
[15715.178090] usb 1-3: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)... | |
[15715.178875] Registered IR keymap rc-su3000 | |
[15715.179373] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input15 | |
[15715.179787] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0 | |
[15715.179796] dvb-usb: schedule remote query interval to 150 msecs. | |
[15715.179803] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[15715.179807] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[15717.331981] dvb-usb: recv bulk message failed: -110 | |
[15717.331989] dw2102: i2c transfer failed. | |
[15717.447984] usb 1-4: new high-speed USB device number 15 using xhci_hcd | |
[15717.577209] usb 1-4: New USB device found, idVendor=1f4d, idProduct=d220 | |
[15717.577216] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[15717.577220] usb 1-4: Product: USB Device | |
[15717.577224] usb 1-4: Manufacturer: Geniatech | |
[15717.577227] usb 1-4: SerialNumber: 0001 | |
[15717.580964] dw2102: su3000_identify_state | |
[15717.580970] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state. | |
[15717.580978] dw2102: su3000_power_ctrl: 1, initialized 0 | |
[15717.581311] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. | |
[15717.581465] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0) | |
[15717.586373] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff | |
[15717.641252] tda18271 2-0060: creating new instance | |
[15717.646212] TDA18271HD/C2 detected @ 2-0060 | |
[15717.885719] dw2102: Attached TDA18271HD/CXD2820R! | |
[15717.885734] usb 1-4: DVB: registering adapter 1 frontend 0 (Sony CXD2820R)... | |
[15717.886315] Registered IR keymap rc-su3000 | |
[15717.886565] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1/input16 | |
[15717.886876] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/rc/rc1 | |
[15717.886882] dvb-usb: schedule remote query interval to 150 msecs. | |
[15717.886887] dw2102: su3000_power_ctrl: 0, initialized 1 | |
[15717.886891] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected. | |
[15720.036044] dvb-usb: recv bulk message failed: -110 | |
[15720.036052] dw2102: i2c transfer failed. | |
[15729.907751] usb 1-3: USB disconnect, device number 14 | |
[15729.944516] tda18271 1-0060: destroying instance | |
[15729.945403] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully deinitialized and disconnected. | |
[15764.300259] dw2102: su3000_power_ctrl: 1, initialized 1 | |
[15764.309773] tda18271: performing RF tracking filter calibration | |
[15766.825569] tda18271: RF tracking filter calibration complete | |
[16987.743196] dw2102: su3000_power_ctrl: 0, initialized 1 | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment