qsd8k bcmdhd

gistfile1.txt

<4>[   10.884735] ## wifi_probe
<4>[   10.886840] wifi_set_power = 1
<4>[   10.889770] mahimahi_wifi_power: 1
<4>[   11.248992] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[   11.251373] mmc1: new high speed SDHC card at address 0007
<6>[   11.254089] mmcblk0: mmc1:0007 SD16G 14.9 GiB 
<6>[   11.257324]  mmcblk0: p1 p2 p3
<6>[   11.294189] batt:  99%, 4153 mV, 111 mA (9 avg), 29.0 C, 1344 mAh
<6>[   11.301666] batt: charging OFF [FULL]
<4>[   11.340698] wifi_set_carddetect = 1
<6>[   11.340972] mahimahi_wifi_set_carddetect: 1
<7>[   11.341156] mmc0: card_present 1
<6>[   11.341308] mmc0: Slot status change detected (0 -> 1)
<4>[   11.341827] 
<4>[   11.341827] Dongle Host Driver, version 5.90.195.75
<4>[   11.341827] Compiled in drivers/net/wireless/bcmdhd on Jun 30 2012 at 12:19:16
<6>[   13.433593] cable_status_update: status=1
<6>[   13.461090] msm72k_udc: OFFLINE -> ONLINE
<6>[   13.461486] hsusb: reset controller
<6>[   13.468627] batt: charging BATTOFF [FULL]
<6>[   13.521087] msm_hsusb_phy_reset: success
<6>[   13.711090] usb: notify offline
<6>[   13.711242] msm_hsusb: enable pullup
<6>[   13.714416] msm72k_udc: msm72k_udc: suspend
<4>[   13.904052] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[   13.904266] mmc0: new high speed SDIO card at address 0001
<4>[   13.905242] F1 signature read @0x18000000=0x9934329
<4>[   13.907226] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   13.908355] wl_create_event_handler thr:43 started
<4>[   13.909423] p2p0: P2P Interface Registered
<4>[   13.909820] dhd_attach thr:44 started
<4>[   13.910156] dhd_attach thr:45 started
<4>[   13.910369] dhd_attach thr:46 started
<4>[   13.910644] wifi_get_mac_addr
<4>[   13.911651] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[   13.912292] wifi_set_power = 0
<4>[   13.915374] mahimahi_wifi_power: 0
<4>[   13.925872] bcmsdh_sdmmc: probe of mmc0:0001:3 failed with error -110
<6>[   14.010101] msm72k_udc: msm72k_udc: reset
<6>[   14.012329] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<6>[   14.079803] msm72k_udc: msm72k_udc: reset
<6>[   14.082092] msm72k_udc: msm72k_udc: portchange USB_SPEED_HIGH
<4>[   14.172363] ### notify_usb_connected(1) ###
<6>[   14.172637] android_usb gadget: high speed config #1: android
<4>[   14.225280] =========== WLAN placed in RESET ========
<6>[   14.226715] rs30000048:00010000 rs30000048:00010000: setting system clock to 2012-06-30 17:29:34 UTC (1341077374)