Skip to content

Instantly share code, notes, and snippets.

@drt1245
Created December 23, 2018 19:04
Show Gist options
  • Save drt1245/6a0e7ce3f0e2e0ccd5eff1c7c67218fe to your computer and use it in GitHub Desktop.
Save drt1245/6a0e7ce3f0e2e0ccd5eff1c7c67218fe to your computer and use it in GitHub Desktop.
OpenWRT flash & boot log on Belkin F7D7301
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x8079AD20 (634144)
Data: 0x80731E00 - 0x807341B0 (9136)
BSS: 0x807341B0 - 0x80734D20 (2928)
Heap: 0x80734D20 - 0x80798D20 (409600)
Stack: 0x80798D20 - 0x8079AD20 (8192)
Text: 0x80700000 - 0x80731DF4 (204276)
Copying boot params.....
DONE
Bootloader version 1.00e boot_version 1.00e
Project name : WG7117F22 2-LF-AK
Press space bar to cancel startup...
Device eth0: hwaddr 94-44-52-94-05-84, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Startup canceled
CFE> flash -noheader : flash1.trx
Reading :: Done. 3870720 bytes read
Programming...done. 3870720 bytes written
*** command status = 0
CFE> reboot
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x8079AD20 (634144)
Data: 0x80731E00 - 0x807341B0 (9136)
BSS: 0x807341B0 - 0x80734D20 (2928)
Heap: 0x80734D20 - 0x80798D20 (409600)
Stack: 0x80798D20 - 0x8079AD20 (8192)
Text: 0x80700000 - 0x80731DF4 (204276)
Copying boot params.....
DONE
Bootloader version 1.00e boot_version 1.00e
Project name : WG7117F22 2-LF-AK
Press space bar to cancel startup...
Device eth0: hwaddr 94-44-52-94-05-84, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3848 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 4.14.89 (damon@opi-pc) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7628-15530f4d1a)) #0 Fri Dec 21 21:21:56 2018
[ 0.000000] CPU0 revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: Using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] This processor doesn't support highmem. -65536k highmem ignored
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x478 with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 59912K/65536K available (3526K kernel code, 147K rwdata, 796K rodata, 192K init, 293K bss, 5624K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 128
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[ 0.000000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[ 0.000000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[ 0.000000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] MIPS: machine is Unknown Board
[ 0.000000] bcm47xx: Setting up vectored interrupts
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8438235966 ns
[ 0.000016] sched_clock: 32 bits at 226MHz, resolution 4ns, wraps every 9481163773ns
[ 0.000110] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[ 0.070072] pid_max: default: 32768 minimum: 301
[ 0.070495] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070536] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.074518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.074575] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.075521] NET: Registered protocol family 16
[ 0.111969] clocksource: Switched to clocksource MIPS
[ 0.114190] NET: Registered protocol family 2
[ 0.115602] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.115664] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.115706] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.115984] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.116044] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.116504] NET: Registered protocol family 1
[ 0.459871] 2(S)*
[ 0.459879] 3
[ 0.459901] 4
[ 0.459915] 5
[ 0.459929] 6
[ 0.459943] D
[ 0.459957] I
[ 0.459971]
[ 0.460001] 2(S)
[ 0.460008] 3*
[ 0.460022] 4
[ 0.460036] 5
[ 0.460050] 6
[ 0.460064] D
[ 0.460077] I
[ 0.460091]
[ 0.460121] 2(S)
[ 0.460128] 3
[ 0.460142] 4*
[ 0.460156] 5
[ 0.460169] 6
[ 0.460183] D
[ 0.460197] I
[ 0.460210]
[ 0.460239] 2(S)
[ 0.460246] 3
[ 0.460260] 4
[ 0.460274] 5
[ 0.460287] 6
[ 0.460301] D
[ 0.460315] I*
[ 0.460328]
[ 0.460358] 2(S)
[ 0.460364] 3
[ 0.460379] 4
[ 0.460392] 5*
[ 0.460406] 6
[ 0.460420] D
[ 0.460433] I
[ 0.460446]
[ 0.460476] 2(S)
[ 0.460483] 3
[ 0.460497] 4
[ 0.460511] 5
[ 0.460524] 6*
[ 0.460538] D
[ 0.460552] I
[ 0.460565]
[ 0.460595] 2(S)
[ 0.460601] 3
[ 0.460616] 4
[ 0.460629] 5
[ 0.460643] 6
[ 0.460656] D*
[ 0.460670] I
[ 0.460683]
[ 0.460712] 2(S)
[ 0.460719] 3
[ 0.460733] 4
[ 0.460747] 5
[ 0.460760] 6
[ 0.460774] D
[ 0.460787] I*
[ 0.460801]
[ 0.460830] 2(S)*
[ 0.460836] 3
[ 0.460851] 4
[ 0.460864] 5
[ 0.460878] 6
[ 0.460891] D
[ 0.460905] I
[ 0.460918]
[ 0.460942] bcma: bus0: PCIEcore in host mode found
[ 0.667295] PCI host bridge to bus 0000:00
[ 0.667356] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff]
[ 0.667387] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.667419] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.667450] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.667578] bcma: PCI: Fixing up bridge 0000:00:00.0
[ 0.667602] bcma: PCI: Fixing up device 0000:00:00.0
[ 0.667758] pci 0000:00:00.0: enabling Extended Tags
[ 0.668343] bcma: PCI: Fixing up bridge 0000:00:00.1
[ 0.668375] bcma: PCI: Fixing up device 0000:00:00.1
[ 0.668524] pci 0000:00:00.1: enabling Extended Tags
[ 0.670735] bcma: bus0: Bus registered
[ 0.671905] Crashlog allocated RAM at address 0x3f00000
[ 0.678934] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.688419] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.688458] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.709027] io scheduler noop registered
[ 0.709069] io scheduler deadline registered (default)
[ 0.709428] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.710455] console [ttyS0] disabled
[ 0.730738] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[ 1.359878] console [ttyS0] enabled
[ 1.364957] physmap platform flash device: 02000001 at 1c000000
[ 1.371091] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000cb
[ 1.381636] Amd/Fujitsu Extended Query Table at 0x0040
[ 1.386945] Amd/Fujitsu Extended Query version 1.1.
[ 1.392147] number of CFI chips: 1
[ 1.426980] 3 bcm47xxpart partitions found on MTD device physmap-flash.0
[ 1.433861] Creating 3 MTD partitions on "physmap-flash.0":
[ 1.439548] 0x000000000000-0x000000030000 : "boot"
[ 1.450068] 0x000000030000-0x0000007f0000 : "firmware"
[ 1.457009] 3 trx partitions found on MTD device firmware
[ 1.462627] Creating 3 MTD partitions on "firmware":
[ 1.467698] 0x00000000001c-0x000000000950 : "loader"
[ 1.477478] 0x000000000950-0x000000174c00 : "linux"
[ 1.485138] 0x000000174c00-0x0000007c0000 : "rootfs"
[ 1.491764] mtd: device 4 (rootfs) set to be root filesystem
[ 1.497687] 1 squashfs-split partitions found on MTD device rootfs
[ 1.504051] 0x000000370000-0x0000007c0000 : "rootfs_data"
[ 1.515257] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.527000] libphy: Fixed MDIO Bus: probed
[ 1.531427] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[ 1.541472] libphy: bcma_mdio mii bus: probed
[ 1.546044] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[ 1.729242] b53_common: found switch: BCM53115, rev 8
[ 1.735714] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 1.741950] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 1.751874] NET: Registered protocol family 10
[ 1.763772] Segment Routing with IPv6
[ 1.767687] NET: Registered protocol family 17
[ 1.772437] 8021q: 802.1Q VLAN Support v1.8
[ 1.785999] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.794632] Freeing unused kernel memory: 192K
[ 1.799163] This architecture does not have kernel memory protection.
[ 2.561998] random: fast init done
[ 2.709602] init: Console is alive
[ 2.713683] init: - watchdog -
[ 3.913392] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.096071] usbcore: registered new interface driver usbfs
[ 4.101821] usbcore: registered new interface driver hub
[ 4.107557] usbcore: registered new device driver usb
[ 4.121929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.131578] ehci-platform: EHCI generic platform driver
[ 4.137160] ehci-platform ehci-platform.0: EHCI Host Controller
[ 4.143367] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 4.151772] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
[ 4.182043] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 4.190349] hub 1-0:1.0: USB hub found
[ 4.195005] hub 1-0:1.0: 2 ports detected
[ 4.205024] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.214317] ohci-platform: OHCI generic platform driver
[ 4.219812] ohci-platform ohci-platform.0: Generic Platform OHCI controller
[ 4.227090] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[ 4.235544] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
[ 4.307881] hub 2-0:1.0: USB hub found
[ 4.312533] hub 2-0:1.0: 2 ports detected
[ 4.322262] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.340419] init: - preinit -
[ 6.379223] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.460386] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.515801] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.567029] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.602059] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[ 7.609611] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.098481] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 10.147975] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.323350] procd: - early -
[ 10.326546] procd: - watchdog -
[ 11.036380] procd: - watchdog -
[ 11.040403] procd: - ubus -
[ 11.086099] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.096016] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.103463] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.112414] procd: - init -
Please press Enter to activate this console.
[ 12.085705] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.101636] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.128875] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 12.137117] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 12.149718] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.171100] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 12.284210] xt_time: kernel timezone is -0000
[ 12.377671] PPP generic driver version 2.4.2
[ 12.386950] NET: Registered protocol family 24
[ 12.409991] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
[ 12.417261] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
[ 12.423583] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 7, Version 0
[ 12.431899] Broadcom 43xx driver loaded [ Features: NL ]
[ 12.468732] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 22.998104] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 23.042108] jffs2_build_filesystem(): unlocking the mtd device...
[ 23.042128] done.
[ 23.050386] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 27.149521] br-lan: port 1(eth0) entered blocking state
[ 27.162593] br-lan: port 1(eth0) entered disabled state
[ 27.168459] device eth0 entered promiscuous mode
[ 27.262498] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 28.162074] bgmac_bcma bcma0:2 eth0: Link is Up - 1Gbps/Full - flow control off
[ 28.169637] br-lan: port 1(eth0) entered blocking state
[ 28.175064] br-lan: port 1(eth0) entered forwarding state
[ 28.220466] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 63.237301] done.
[ 63.239335] jffs2: notice: (897) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 63.630380] overlayfs: upper fs does not support tmpfile.
[ 130.552061] random: crng init done
[ 130.555552] random: 4 urandom warning(s) missed due to ratelimiting
BusyBox v1.28.4 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 18.06-SNAPSHOT, r7629-d284532cb4
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/# reboot
root@OpenWrt:/# [ 150.532460] br-lan: port 1(eth0) entered disabled state
[ 150.554551] device eth0 left promiscuous mode
[ 150.559149] br-lan: port 1(eth0) entered disabled state
[ 150.580776] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 155.000313] reboot: Restarting system
[ 155.004162] bcm47xx: Please stand by while rebooting the system...
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x8079AD20 (634144)
Data: 0x80731E00 - 0x807341B0 (9136)
BSS: 0x807341B0 - 0x80734D20 (2928)
Heap: 0x80734D20 - 0x80798D20 (409600)
Stack: 0x80798D20 - 0x8079AD20 (8192)
Text: 0x80700000 - 0x80731DF4 (204276)
Copying boot params.....
DONE
Bootloader version 1.00e boot_version 1.00e
Project name : WG7117F22 2-LF-AK
Press space bar to cancel startup...
Device eth0: hwaddr 94-44-52-94-05-84, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Boot program checksum is invalid
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
CFE>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment