Created
April 20, 2022 17:08
-
-
Save dsalychev/3ecbffd28b3b3fc5faef5496953e217a to your computer and use it in GitHub Desktop.
FreeBSD DPAA2 drivers work-in-progress on Traverse Ten64 #2
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| GDB: debug ports: uart | |
| GDB: current port: uart | |
| KDB: debugger backends: ddb gdb | |
| KDB: current backend: ddb | |
| WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance | |
| Type Physical Virtual #Pages Attr | |
| ConventionalMemory 000080000000 000080000000 00007ee7 WB | |
| BootServicesData 000087ee7000 000087ee7000 00000032 WB | |
| ConventionalMemory 000087f19000 000087f19000 0006eaad WB | |
| RuntimeServicesData 0000f69c6000 0000f69c6000 00000001 WB RUNTIME | |
| LoaderData 0000f69c7000 0000f69c7000 000052f9 WB | |
| RuntimeServicesCode 0000fbcc0000 0000fbcc0000 00000010 WB RUNTIME | |
| LoaderData 0000fbcd0000 0000fbcd0000 00000130 WB | |
| ConventionalMemory 008080000000 008080000000 00157eb5 WB | |
| LoaderData 0081d7eb5000 0081d7eb5000 00008001 WB | |
| LoaderCode 0081dfeb6000 0081dfeb6000 00000133 WB | |
| Reserved 0081dffe9000 0081dffe9000 00000005 WB | |
| BootServicesData 0081dffee000 0081dffee000 00000003 WB | |
| Reserved 0081dfff1000 0081dfff1000 00000001 WB | |
| BootServicesData 0081dfff2000 0081dfff2000 00000003 WB | |
| RuntimeServicesData 0081dfff5000 0081dfff5000 00000001 WB RUNTIME | |
| Reserved 0081dfff6000 0081dfff6000 00000003 WB | |
| RuntimeServicesData 0081dfff9000 0081dfff9000 00000001 WB RUNTIME | |
| Reserved 0081dfffa000 0081dfffa000 00000006 WB | |
| Physical memory chunk(s): | |
| 0x80000000 - 0xfbcbffff, 1980 MB ( 507072 pages) | |
| 0xfbcd0000 - 0xfbdfffff, 1 MB ( 304 pages) | |
| 0x8080000000 - 0x81dffe8fff, 5631 MB (1441769 pages) | |
| 0x81dffee000 - 0x81dfff0fff, 0 MB ( 3 pages) | |
| 0x81dfff2000 - 0x81dfff5fff, 0 MB ( 4 pages) | |
| 0x81dfff9000 - 0x81dfff9fff, 0 MB ( 1 pages) | |
| Excluded memory regions: | |
| 0xf69c6000 - 0xf69c6fff, 0 MB ( 1 pages) NoAlloc | |
| 0xfbcc0000 - 0xfbccffff, 0 MB ( 16 pages) NoAlloc | |
| 0x81d8000000 - 0x81d9b0cfff, 27 MB ( 6925 pages) NoAlloc | |
| 0x81dffe9000 - 0x81dffedfff, 0 MB ( 5 pages) NoAlloc | |
| 0x81dfff1000 - 0x81dfff1fff, 0 MB ( 1 pages) NoAlloc | |
| 0x81dfff5000 - 0x81dfffffff, 0 MB ( 11 pages) NoAlloc | |
| Found 8 CPUs in the device tree | |
| Copyright (c) 1992-2022 The FreeBSD Project. | |
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| The Regents of the University of California. All rights reserved. | |
| FreeBSD is a registered trademark of The FreeBSD Foundation. | |
| FreeBSD 14.0-CURRENT #9 lx2160acex7-dev-n254865-1d9074a7329e: Mon Apr 18 21:49:01 CEST 2022 | |
| root@guardian:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 | |
| FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| VT: init without driver. | |
| Preloaded elf kernel "/boot/kernel/kernel" at 0xffff0000018de000. | |
| Preloaded elf module "/boot/kernel/filemon.ko" at 0xffff0000018e71b0. | |
| Preloaded elf module "/boot/kernel/zfs.ko" at 0xffff0000018e7888. | |
| Preloaded elf module "/boot/kernel/cryptodev.ko" at 0xffff0000018e80a0. | |
| Preloaded boot_entropy_cache "/boot/entropy" at 0xffff0000018e8880. | |
| Preloaded hostuuid "/etc/hostid" at 0xffff0000018e88d8. | |
| Preloaded TSLOG data "TSLOG" at 0xffff0000018e8928. | |
| module firmware already present! | |
| real memory = 7983730688 (7613 MB) | |
| Physical memory chunk(s): | |
| 0x00000080000000 - 0x000000f69c5fff, 1989959680 bytes (485830 pages) | |
| 0x000000f69c7000 - 0x000000fbcbffff, 87003136 bytes (21241 pages) | |
| 0x000000fbcd0000 - 0x000000fbdfffff, 1245184 bytes (304 pages) | |
| 0x00008080000000 - 0x000081cc0edfff, 5571010560 bytes (1360110 pages) | |
| 0x000081d9b0d000 - 0x000081dffe8fff, 105758720 bytes (25820 pages) | |
| 0x000081dffee000 - 0x000081dfff0fff, 12288 bytes (3 pages) | |
| 0x000081dfff2000 - 0x000081dfff4fff, 12288 bytes (3 pages) | |
| avail memory = 7752847360 (7393 MB) | |
| Starting CPU 1 (1) | |
| Starting CPU 2 (2) | |
| Starting CPU 3 (3) | |
| Starting CPU 4 (100) | |
| Starting CPU 5 (101) | |
| Starting CPU 6 (102) | |
| Starting CPU 7 (103) | |
| FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs | |
| random: read 4096 bytes from preloaded cache | |
| random: no platform bootloader entropy | |
| random: unblocking device. | |
| VIMAGE (virtualized network stack) enabled | |
| hostuuid: using 175b114f-1dd2-11b2-a4a7-000afa242b1f | |
| ULE: setup cpu 0 | |
| ULE: setup cpu 1 | |
| ULE: setup cpu 2 | |
| ULE: setup cpu 3 | |
| ULE: setup cpu 4 | |
| ULE: setup cpu 5 | |
| ULE: setup cpu 6 | |
| ULE: setup cpu 7 | |
| random: entropy device external interface | |
| snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] | |
| feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 | |
| firmware: 'tegra210_xusb_fw' version 0: 132608 bytes loaded at 0xffff0000009afe48 | |
| MAP f69c6000 mode 2 pages 1 | |
| MAP fbcc0000 mode 2 pages 16 | |
| MAP 81dfff5000 mode 2 pages 1 | |
| MAP 81dfff9000 mode 2 pages 1 | |
| null: <full device, null device, zero device> | |
| openfirm: <Open Firmware control device> | |
| crypto: <crypto core> | |
| kbd0 at kbdmux0 | |
| mem: <memory> | |
| ofwbus0: <Open Firmware Device Tree> | |
| clk_fixed0: <Fixed clock> on ofwbus0 | |
| simplebus0: <Flattened device tree simple bus> on ofwbus0 | |
| psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 | |
| psci0: PSCI version 0.2 compatible | |
| gic0: <ARM Generic Interrupt Controller v3.0> mem 0x6000000-0x600ffff,0x6100000-0x61fffff,0xc0c0000-0xc0c1fff,0xc0d0000-0xc0d0fff,0xc0e0000-0xc0fffff irq 0 on ofwbus0 | |
| gic0: SPIs: 288, IDs: 65535 | |
| gic0: Start searching for Re-Distributor | |
| gic0: CPU0 Re-Distributor has been found | |
| gic0: CPU0 Re-Distributor woke up | |
| gic0: CPU0 enabled CPU interface via system registers | |
| its0: <ARM GIC Interrupt Translation Service> mem 0x6020000-0x603ffff on gic0 | |
| gpio0: <Freescale QorIQ GPIO PIC driver> mem 0x2300000-0x230ffff irq 10 on simplebus0 | |
| gpiobus0: <GPIO bus> on gpio0 | |
| gpio1: <Freescale QorIQ GPIO PIC driver> mem 0x2310000-0x231ffff irq 11 on simplebus0 | |
| gpiobus1: <GPIO bus> on gpio1 | |
| gpio2: <Freescale QorIQ GPIO PIC driver> mem 0x2320000-0x232ffff irq 12 on simplebus0 | |
| gpiobus2: <GPIO bus> on gpio2 | |
| gpio3: <Freescale QorIQ GPIO PIC driver> mem 0x2330000-0x233ffff irq 13 on simplebus0 | |
| gpiobus3: <GPIO bus> on gpio3 | |
| generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on ofwbus0 | |
| Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000 | |
| Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000 | |
| efirtc0: cannot read EFI realtime clock, error 78 | |
| cpulist0: <Open Firmware CPU Group> on ofwbus0 | |
| cpu0: <Open Firmware CPU> on cpulist0 | |
| cpu0: missing 'clock-frequency' property | |
| cpu1: <Open Firmware CPU> on cpulist0 | |
| cpu1: missing 'clock-frequency' property | |
| cpu2: <Open Firmware CPU> on cpulist0 | |
| cpu2: missing 'clock-frequency' property | |
| cpu3: <Open Firmware CPU> on cpulist0 | |
| cpu3: missing 'clock-frequency' property | |
| cpu4: <Open Firmware CPU> on cpulist0 | |
| cpu4: missing 'clock-frequency' property | |
| cpu5: <Open Firmware CPU> on cpulist0 | |
| cpu5: missing 'clock-frequency' property | |
| cpu6: <Open Firmware CPU> on cpulist0 | |
| cpu6: missing 'clock-frequency' property | |
| cpu7: <Open Firmware CPU> on cpulist0 | |
| cpu7: missing 'clock-frequency' property | |
| pmu0: <Performance Monitoring Unit> irq 5 on ofwbus0 | |
| simplebus0: <clocking@1300000> mem 0x1300000-0x139ffff compat fsl,ls1088a-clockgen (no driver attached) | |
| syscon_generic_dev0: <syscon> mem 0x1e00000-0x1e0ffff on simplebus0 | |
| soctherm0: <QorIQ temperature sensors> mem 0x1f80000-0x1f8ffff irq 6 on simplebus0 | |
| simplebus0: <spi@2100000> mem 0x2100000-0x210ffff irq 7 disabled compat fsl,ls1088a-dspi (no driver attached) | |
| uart0: <16550 or compatible> mem 0x21c0500-0x21c05ff irq 8 on simplebus0 | |
| uart0: console (115131,n,8,1) | |
| uart0: fast interrupt | |
| uart0: PPS capture mode: DCD | |
| uart1: <16550 or compatible> mem 0x21c0600-0x21c06ff irq 9 on simplebus0 | |
| uart1: fast interrupt | |
| uart1: PPS capture mode: DCD | |
| gpioc0: <GPIO controller> on gpio0 | |
| gpioc1: <GPIO controller> on gpio1 | |
| gpioc2: <GPIO controller> on gpio2 | |
| gpioc3: <GPIO controller> on gpio3 | |
| simplebus0: <ifc@2240000> mem 0x2240000-0x225ffff irq 14 disabled compat fsl,ifc (no driver attached) | |
| i2c0: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2000000-0x200ffff irq 15 on simplebus0 | |
| i2c0: Parent clock not found. | |
| iicbus0: <OFW I2C bus> on i2c0 | |
| iic0: <I2C generic I/O> on iicbus0 | |
| iicbus0: <unknown card> at addr 0x30 | |
| iicbus0: <unknown card> at addr 0x22 | |
| iicbus0: <unknown card> at addr 0x34 | |
| iicbus0: <unknown card> at addr 0x98 | |
| iicbus0: <unknown card> at addr 0x52 | |
| iicbus0: <unknown card> at addr 0x5e | |
| iicbus0: <unknown card> at addr 0xc2 | |
| iicbus0: <unknown card> at addr 0xc6 | |
| iicbus0: <unknown card> at addr 0xca | |
| iicbus0: <unknown card> at addr 0xec | |
| simplebus0: <i2c@2010000> mem 0x2010000-0x201ffff irq 16 disabled compat fsl,vf610-i2c (no driver attached) | |
| i2c1: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2020000-0x202ffff irq 17 on simplebus0 | |
| i2c1: Parent clock not found. | |
| iicbus1: <OFW I2C bus> on i2c1 | |
| iic1: <I2C generic I/O> on iicbus1 | |
| iicbus1: <unknown card> at addr 0x64 | |
| i2c2: <Vybrid Family Inter-Integrated Circuit (I2C)> mem 0x2030000-0x203ffff irq 18 on simplebus0 | |
| i2c2: Parent clock not found. | |
| iicbus2: <OFW I2C bus> on i2c2 | |
| iic2: <I2C generic I/O> on iicbus2 | |
| iicbus2: <unknown card> at addr 0xe0 | |
| simplebus0: <spi@20c0000> mem 0x20c0000-0x20cffff,0x20000000-0x2fffffff irq 19 compat fsl,ls2080a-qspi (no driver attached) | |
| sdhci_fsl_fdt0: <NXP QorIQ Layerscape eSDHC controller> mem 0x2140000-0x214ffff irq 20 on simplebus0 | |
| sdhci_fsl_fdt0: Parent clock not found | |
| device_attach: sdhci_fsl_fdt0 attach returned 19 | |
| xhci0: <Synopsys Designware DWC3> mem 0x3100000-0x310ffff irq 21 on simplebus0 | |
| xhci0: snps id: 5533290a | |
| xhci0: 64 bytes context size, 32-bit DMA | |
| usbus0: trying to attach | |
| usbus0 on xhci0 | |
| xhci0: usbpf: Attached | |
| xhci1: <Synopsys Designware DWC3> mem 0x3110000-0x311ffff irq 22 on simplebus0 | |
| xhci1: snps id: 5533290a | |
| xhci1: 64 bytes context size, 32-bit DMA | |
| usbus1: trying to attach | |
| usbus1 on xhci1 | |
| xhci1: usbpf: Attached | |
| simplebus0: <sata@3200000> mem 0x3200000-0x320ffff,0x700100520-0x700100523 irq 23 disabled compat fsl,ls1088a-ahci (no driver attached) | |
| simplebus0: <crypto@8000000> mem 0x8000000-0x80fffff irq 24 compat fsl,sec-v5.0 (no driver attached) | |
| pcib0: <NPX Layaerscape PCI-E Controller> mem 0x3400000-0x34fffff,0x2000000000-0x2000001fff irq 25 on simplebus0 | |
| pcib0: Bus is cache-coherent | |
| pcib0: Using iATU legacy mode | |
| pcib0: Detected outbound iATU regions: 8 | |
| pci0: <OFW PCI bus> on pcib0 | |
| pci0: domain=0, physical bus=0 | |
| found-> vendor=0x1957, dev=0x80c0, revid=0x10 | |
| domain=0, bus=0, slot=0, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=255 | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 16 messages, 64 bit, vector masks | |
| MSI-X supports 8 messages in map 0x14 | |
| secbus=1, subbus=255 | |
| pcib1: <PCI-PCI bridge> at device 0.0 on pci0 | |
| pcib1: domain 0 | |
| pcib1: secondary bus 1 | |
| pcib1: subordinate bus 255 | |
| pci1: <PCI bus> on pcib1 | |
| pcib1: allocated bus range (1-1) for rid 0 of pci1 | |
| pci1: domain=0, physical bus=1 | |
| simplebus0: <pcie-ep@3400000> mem 0x3400000-0x34fffff,0x2000000000-0x27ffffffff disabled compat fsl,ls1088a-pcie-ep (no driver attached) | |
| pcib2: <NPX Layaerscape PCI-E Controller> mem 0x3500000-0x35fffff,0x2800000000-0x2800001fff irq 26 on simplebus0 | |
| pcib2: Bus is cache-coherent | |
| pcib2: Using iATU legacy mode | |
| pcib2: Detected outbound iATU regions: 8 | |
| pci2: <OFW PCI bus> on pcib2 | |
| pci2: domain=2, physical bus=0 | |
| found-> vendor=0x1957, dev=0x80c0, revid=0x10 | |
| domain=2, bus=0, slot=0, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=255 | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 16 messages, 64 bit | |
| secbus=1, subbus=255 | |
| pcib3: <PCI-PCI bridge> at device 0.0 on pci2 | |
| pcib3: domain 2 | |
| pcib3: secondary bus 1 | |
| pcib3: subordinate bus 255 | |
| pci3: <PCI bus> on pcib3 | |
| pcib3: allocated bus range (1-1) for rid 0 of pci3 | |
| pci3: domain=2, physical bus=1 | |
| found-> vendor=0x12d8, dev=0xb304, revid=0x01 | |
| domain=2, bus=1, slot=0, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 4 messages, 64 bit, vector masks | |
| secbus=2, subbus=4 | |
| pcib3: allocated bus range (2-4) for rid 0 of pci2:1:0:0 | |
| pcib4: <PCI-PCI bridge> at device 0.0 on pci3 | |
| pcib4: domain 2 | |
| pcib4: secondary bus 2 | |
| pcib4: subordinate bus 4 | |
| pci4: <PCI bus> on pcib4 | |
| pcib4: allocated bus range (2-2) for rid 0 of pci4 | |
| pci4: domain=2, physical bus=2 | |
| found-> vendor=0x12d8, dev=0xb304, revid=0x01 | |
| domain=2, bus=2, slot=1, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 4 messages, 64 bit, vector masks | |
| secbus=3, subbus=3 | |
| pcib4: allocated bus range (3-3) for rid 0 of pci2:2:1:0 | |
| found-> vendor=0x12d8, dev=0xb304, revid=0x01 | |
| domain=2, bus=2, slot=2, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 4 messages, 64 bit, vector masks | |
| secbus=4, subbus=4 | |
| pcib4: allocated bus range (4-4) for rid 0 of pci2:2:2:0 | |
| pcib5: <PCI-PCI bridge> at device 1.0 on pci4 | |
| pcib5: domain 2 | |
| pcib5: secondary bus 3 | |
| pcib5: subordinate bus 3 | |
| pci5: <PCI bus> on pcib5 | |
| pcib5: allocated bus range (3-3) for rid 0 of pci5 | |
| pci5: domain=2, physical bus=3 | |
| pcib6: <PCI-PCI bridge> at device 2.0 on pci4 | |
| pcib6: domain 2 | |
| pcib6: secondary bus 4 | |
| pcib6: subordinate bus 4 | |
| pci6: <PCI bus> on pcib6 | |
| pcib6: allocated bus range (4-4) for rid 0 of pci6 | |
| pci6: domain=2, physical bus=4 | |
| simplebus0: <pcie-ep@3500000> mem 0x3500000-0x35fffff,0x2800000000-0x2fffffffff disabled compat fsl,ls1088a-pcie-ep (no driver attached) | |
| pcib7: <NPX Layaerscape PCI-E Controller> mem 0x3600000-0x36fffff,0x3000000000-0x3000001fff irq 27 on simplebus0 | |
| pcib7: Bus is cache-coherent | |
| pcib7: Using iATU legacy mode | |
| pcib7: Detected outbound iATU regions: 8 | |
| pci7: <OFW PCI bus> on pcib7 | |
| pci7: domain=7, physical bus=0 | |
| found-> vendor=0x1957, dev=0x80c0, revid=0x10 | |
| domain=7, bus=0, slot=0, func=0 | |
| class=06-04-00, hdrtype=0x01, mfdev=0 | |
| cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=255 | |
| powerspec 3 supports D0 D1 D2 D3 current D0 | |
| MSI supports 16 messages, 64 bit | |
| secbus=1, subbus=255 | |
| pcib8: <PCI-PCI bridge> at device 0.0 on pci7 | |
| pcib8: domain 7 | |
| pcib8: secondary bus 1 | |
| pcib8: subordinate bus 255 | |
| pcib8: memory decode 0x40000000-0x400fffff | |
| pci8: <PCI bus> on pcib8 | |
| pcib8: allocated bus range (1-1) for rid 0 of pci8 | |
| pci8: domain=7, physical bus=1 | |
| found-> vendor=0x144d, dev=0xa80a, revid=0x00 | |
| domain=7, bus=1, slot=0, func=0 | |
| class=01-08-02, hdrtype=0x00, mfdev=0 | |
| cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) | |
| lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
| intpin=a, irq=255 | |
| powerspec 3 supports D0 D3 current D0 | |
| MSI supports 32 messages, 64 bit | |
| MSI-X supports 130 messages in map 0x10 | |
| map[10]: type Memory, range 64, base 0x40000000, size 14, enabled | |
| pcib8: allocated memory range (0x40000000-0x40003fff) for rid 10 of pci7:1:0:0 | |
| nvme0: <Generic NVMe Device> mem 0x40000000-0x40003fff at device 0.0 on pci8 | |
| ofw_pci mapdev: start 3040000000, len 16384 | |
| nvme0: attempting to allocate 9 MSI-X vectors (130 supported) | |
| nvme0: using IRQs 105-113 for MSI-X | |
| nvme0: CapLo: 0x28033fff: MQES 16383, CQR, AMS WRRwUPC, TO 40 | |
| nvme0: CapHi: 0x00000030: DSTRD 0, NSSRS, CSS 1, MPSMIN 0, MPSMAX 0 | |
| nvme0: Version: 0x00010300: 1.3 | |
| simplebus0: <pcie-ep@3600000> mem 0x3600000-0x36fffff,0x3000000000-0x37ffffffff disabled compat fsl,ls1088a-pcie-ep (no driver attached) | |
| simplebus0: <iommu@5000000> mem 0x5000000-0x57fffff irq 28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103 compat arm,mmu-500 (no driver attached) | |
| simplebus0: <console@8340020> mem 0x8340020-0x8340021 compat fsl,dpaa2-console (no driver attached) | |
| simplebus0: <ptp-timer@8b95000> mem 0x8b95000-0x8b950ff compat fsl,dpaa2-ptp (no driver attached) | |
| simplebus0: <mdio@8b96000> mem 0x8b96000-0x8b96fff compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <mdio@8b97000> mem 0x8b97000-0x8b97fff disabled compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <mdio@8c07000> mem 0x8c07000-0x8c07fff compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <mdio@8c0b000> mem 0x8c0b000-0x8c0bfff compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <mdio@8c0f000> mem 0x8c0f000-0x8c0ffff compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <mdio@8c1f000> mem 0x8c1f000-0x8c1ffff compat fsl,fman-memac-mdio (no driver attached) | |
| simplebus0: <wdt@c000000> mem 0xc000000-0xc000fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c010000> mem 0xc010000-0xc010fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c020000> mem 0xc020000-0xc020fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c030000> mem 0xc030000-0xc030fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c100000> mem 0xc100000-0xc100fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c110000> mem 0xc110000-0xc110fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c120000> mem 0xc120000-0xc120fff compat arm,sp805-wdt (no driver attached) | |
| simplebus0: <wdt@c130000> mem 0xc130000-0xc130fff compat arm,sp805-wdt (no driver attached) | |
| dpaa2_mc0: <DPAA2 Management Complex> mem 0x80c000000-0x80c00003f,0x8340000-0x837ffff on simplebus0 | |
| dpaa2_mc0: FAPR=0x60000 | |
| dpaa2_rc0: <DPAA2 Resource Container> on dpaa2_mc0 | |
| dpaa2_rc0: MC firmware version: 10.20.4 | |
| dpaa2_rc0: Resource container ID: 1 | |
| dpaa2_rc0: Objects in container: 146 | |
| dpaa2_rc0: ICID: 23 | |
| dpaa2_rc0: Skip unsupported DPAA2 object: index=30, objects=146 | |
| dpaa2_bp0: <DPAA2 Buffer Pool> at dpbp (id=9) on dpaa2_rc0 | |
| dpaa2_bp1: <DPAA2 Buffer Pool> at dpbp (id=8) on dpaa2_rc0 | |
| dpaa2_bp2: <DPAA2 Buffer Pool> at dpbp (id=7) on dpaa2_rc0 | |
| dpaa2_bp3: <DPAA2 Buffer Pool> at dpbp (id=6) on dpaa2_rc0 | |
| dpaa2_bp4: <DPAA2 Buffer Pool> at dpbp (id=5) on dpaa2_rc0 | |
| dpaa2_bp5: <DPAA2 Buffer Pool> at dpbp (id=4) on dpaa2_rc0 | |
| dpaa2_bp6: <DPAA2 Buffer Pool> at dpbp (id=3) on dpaa2_rc0 | |
| dpaa2_bp7: <DPAA2 Buffer Pool> at dpbp (id=2) on dpaa2_rc0 | |
| dpaa2_bp8: <DPAA2 Buffer Pool> at dpbp (id=1) on dpaa2_rc0 | |
| dpaa2_bp9: <DPAA2 Buffer Pool> at dpbp (id=0) on dpaa2_rc0 | |
| dpaa2_mac0: <DPAA2 MAC> at dpmac (id=10) on dpaa2_rc0 | |
| dpaa2_mac0: ether 00:0a:fb:ec:2b:2a | |
| dpaa2_mac0: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac0: Using IRQ 114 for MSI | |
| dpaa2_mac1: <DPAA2 MAC> at dpmac (id=9) on dpaa2_rc0 | |
| dpaa2_mac1: ether 00:0a:fb:ec:2b:29 | |
| dpaa2_mac1: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac1: Using IRQ 115 for MSI | |
| dpaa2_mac2: <DPAA2 MAC> at dpmac (id=8) on dpaa2_rc0 | |
| dpaa2_mac2: ether 00:0a:fb:ec:2b:28 | |
| dpaa2_mac2: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac2: Using IRQ 116 for MSI | |
| dpaa2_mac3: <DPAA2 MAC> at dpmac (id=7) on dpaa2_rc0 | |
| dpaa2_mac3: ether 00:0a:fb:ec:2b:1f | |
| dpaa2_mac3: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac3: Using IRQ 117 for MSI | |
| dpaa2_mac4: <DPAA2 MAC> at dpmac (id=6) on dpaa2_rc0 | |
| dpaa2_mac4: ether 00:0a:fb:ec:2b:26 | |
| dpaa2_mac4: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac4: Using IRQ 118 for MSI | |
| dpaa2_mac5: <DPAA2 MAC> at dpmac (id=5) on dpaa2_rc0 | |
| dpaa2_mac5: ether 00:0a:fb:ec:2b:25 | |
| dpaa2_mac5: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac5: Using IRQ 119 for MSI | |
| dpaa2_mac6: <DPAA2 MAC> at dpmac (id=4) on dpaa2_rc0 | |
| dpaa2_mac6: ether 00:0a:fb:ec:2b:24 | |
| dpaa2_mac6: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac6: Using IRQ 120 for MSI | |
| dpaa2_mac7: <DPAA2 MAC> at dpmac (id=3) on dpaa2_rc0 | |
| dpaa2_mac7: ether 00:0a:fb:ec:2b:23 | |
| dpaa2_mac7: max_rate=1000, eth_if=QSGMII, link_type=FIXED | |
| dpaa2_mac7: Using IRQ 121 for MSI | |
| dpaa2_mac8: <DPAA2 MAC> at dpmac (id=2) on dpaa2_rc0 | |
| dpaa2_mac8: ether 00:0a:ff:34:2b:2a | |
| dpaa2_mac8: max_rate=10000, eth_if=XFI, link_type=FIXED | |
| dpaa2_mac8: Using IRQ 122 for MSI | |
| dpaa2_mac9: <DPAA2 MAC> at dpmac (id=1) on dpaa2_rc0 | |
| dpaa2_mac9: ether 00:0a:ff:34:2b:27 | |
| dpaa2_mac9: max_rate=10000, eth_if=XFI, link_type=FIXED | |
| dpaa2_mac9: Using IRQ 123 for MSI | |
| dpaa2_io0: <DPAA2 I/O> iomem 0x818080000-0x818080fff,0x81c080000-0x81c080fff at dpio (id=8) on dpaa2_rc0 | |
| dpaa2_io0: Using IRQ 124 for MSI | |
| dpaa2_io0: dpio_id=8, swp_id=8, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io1: <DPAA2 I/O> iomem 0x818070000-0x818070fff,0x81c070000-0x81c070fff at dpio (id=7) on dpaa2_rc0 | |
| dpaa2_io1: Using IRQ 125 for MSI | |
| dpaa2_io1: dpio_id=7, swp_id=7, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io2: <DPAA2 I/O> iomem 0x818060000-0x818060fff,0x81c060000-0x81c060fff at dpio (id=6) on dpaa2_rc0 | |
| dpaa2_io2: Using IRQ 126 for MSI | |
| dpaa2_io2: dpio_id=6, swp_id=6, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io3: <DPAA2 I/O> iomem 0x818050000-0x818050fff,0x81c050000-0x81c050fff at dpio (id=5) on dpaa2_rc0 | |
| dpaa2_io3: Using IRQ 127 for MSI | |
| dpaa2_io3: dpio_id=5, swp_id=5, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io4: <DPAA2 I/O> iomem 0x818040000-0x818040fff,0x81c040000-0x81c040fff at dpio (id=4) on dpaa2_rc0 | |
| dpaa2_io4: Using IRQ 128 for MSI | |
| dpaa2_io4: dpio_id=4, swp_id=4, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io5: <DPAA2 I/O> iomem 0x818030000-0x818030fff,0x81c030000-0x81c030fff at dpio (id=3) on dpaa2_rc0 | |
| dpaa2_io5: Using IRQ 129 for MSI | |
| dpaa2_io5: dpio_id=3, swp_id=3, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io6: <DPAA2 I/O> iomem 0x818020000-0x818020fff,0x81c020000-0x81c020fff at dpio (id=2) on dpaa2_rc0 | |
| dpaa2_io6: Using IRQ 130 for MSI | |
| dpaa2_io6: dpio_id=2, swp_id=2, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_io7: <DPAA2 I/O> iomem 0x818010000-0x818010fff,0x81c010000-0x81c010fff at dpio (id=1) on dpaa2_rc0 | |
| dpaa2_io7: Using IRQ 131 for MSI | |
| dpaa2_io7: dpio_id=1, swp_id=1, chan_mode=local_channel, notif_priors=8, swp_version=0x4010001 | |
| dpaa2_con0: <DPAA2 Concentrator> at dpcon (id=72) on dpaa2_rc0 | |
| dpaa2_con0: chan_id=73, priorities=2 | |
| dpaa2_con1: <DPAA2 Concentrator> at dpcon (id=71) on dpaa2_rc0 | |
| dpaa2_con1: chan_id=72, priorities=2 | |
| dpaa2_con2: <DPAA2 Concentrator> at dpcon (id=70) on dpaa2_rc0 | |
| dpaa2_con2: chan_id=71, priorities=2 | |
| dpaa2_con3: <DPAA2 Concentrator> at dpcon (id=69) on dpaa2_rc0 | |
| dpaa2_con3: chan_id=70, priorities=2 | |
| dpaa2_con4: <DPAA2 Concentrator> at dpcon (id=68) on dpaa2_rc0 | |
| dpaa2_con4: chan_id=69, priorities=2 | |
| dpaa2_con5: <DPAA2 Concentrator> at dpcon (id=67) on dpaa2_rc0 | |
| dpaa2_con5: chan_id=68, priorities=2 | |
| dpaa2_con6: <DPAA2 Concentrator> at dpcon (id=66) on dpaa2_rc0 | |
| dpaa2_con6: chan_id=67, priorities=2 | |
| dpaa2_con7: <DPAA2 Concentrator> at dpcon (id=65) on dpaa2_rc0 | |
| dpaa2_con7: chan_id=66, priorities=2 | |
| dpaa2_con8: <DPAA2 Concentrator> at dpcon (id=64) on dpaa2_rc0 | |
| dpaa2_con8: chan_id=65, priorities=2 | |
| dpaa2_con9: <DPAA2 Concentrator> at dpcon (id=63) on dpaa2_rc0 | |
| dpaa2_con9: chan_id=64, priorities=2 | |
| dpaa2_con10: <DPAA2 Concentrator> at dpcon (id=62) on dpaa2_rc0 | |
| dpaa2_con10: chan_id=63, priorities=2 | |
| dpaa2_con11: <DPAA2 Concentrator> at dpcon (id=61) on dpaa2_rc0 | |
| dpaa2_con11: chan_id=62, priorities=2 | |
| dpaa2_con12: <DPAA2 Concentrator> at dpcon (id=60) on dpaa2_rc0 | |
| dpaa2_con12: chan_id=61, priorities=2 | |
| dpaa2_con13: <DPAA2 Concentrator> at dpcon (id=59) on dpaa2_rc0 | |
| dpaa2_con13: chan_id=60, priorities=2 | |
| dpaa2_con14: <DPAA2 Concentrator> at dpcon (id=58) on dpaa2_rc0 | |
| dpaa2_con14: chan_id=59, priorities=2 | |
| dpaa2_con15: <DPAA2 Concentrator> at dpcon (id=57) on dpaa2_rc0 | |
| dpaa2_con15: chan_id=58, priorities=2 | |
| dpaa2_con16: <DPAA2 Concentrator> at dpcon (id=56) on dpaa2_rc0 | |
| dpaa2_con16: chan_id=57, priorities=2 | |
| dpaa2_con17: <DPAA2 Concentrator> at dpcon (id=55) on dpaa2_rc0 | |
| dpaa2_con17: chan_id=56, priorities=2 | |
| dpaa2_con18: <DPAA2 Concentrator> at dpcon (id=54) on dpaa2_rc0 | |
| dpaa2_con18: chan_id=55, priorities=2 | |
| dpaa2_con19: <DPAA2 Concentrator> at dpcon (id=53) on dpaa2_rc0 | |
| dpaa2_con19: chan_id=54, priorities=2 | |
| dpaa2_con20: <DPAA2 Concentrator> at dpcon (id=52) on dpaa2_rc0 | |
| dpaa2_con20: chan_id=53, priorities=2 | |
| dpaa2_con21: <DPAA2 Concentrator> at dpcon (id=51) on dpaa2_rc0 | |
| dpaa2_con21: chan_id=52, priorities=2 | |
| dpaa2_con22: <DPAA2 Concentrator> at dpcon (id=50) on dpaa2_rc0 | |
| dpaa2_con22: chan_id=51, priorities=2 | |
| dpaa2_con23: <DPAA2 Concentrator> at dpcon (id=49) on dpaa2_rc0 | |
| dpaa2_con23: chan_id=50, priorities=2 | |
| dpaa2_con24: <DPAA2 Concentrator> at dpcon (id=48) on dpaa2_rc0 | |
| dpaa2_con24: chan_id=49, priorities=2 | |
| dpaa2_con25: <DPAA2 Concentrator> at dpcon (id=47) on dpaa2_rc0 | |
| dpaa2_con25: chan_id=48, priorities=2 | |
| dpaa2_con26: <DPAA2 Concentrator> at dpcon (id=46) on dpaa2_rc0 | |
| dpaa2_con26: chan_id=47, priorities=2 | |
| dpaa2_con27: <DPAA2 Concentrator> at dpcon (id=45) on dpaa2_rc0 | |
| dpaa2_con27: chan_id=46, priorities=2 | |
| dpaa2_con28: <DPAA2 Concentrator> at dpcon (id=44) on dpaa2_rc0 | |
| dpaa2_con28: chan_id=45, priorities=2 | |
| dpaa2_con29: <DPAA2 Concentrator> at dpcon (id=43) on dpaa2_rc0 | |
| dpaa2_con29: chan_id=44, priorities=2 | |
| dpaa2_con30: <DPAA2 Concentrator> at dpcon (id=42) on dpaa2_rc0 | |
| dpaa2_con30: chan_id=43, priorities=2 | |
| dpaa2_con31: <DPAA2 Concentrator> at dpcon (id=41) on dpaa2_rc0 | |
| dpaa2_con31: chan_id=42, priorities=2 | |
| dpaa2_con32: <DPAA2 Concentrator> at dpcon (id=40) on dpaa2_rc0 | |
| dpaa2_con32: chan_id=41, priorities=2 | |
| dpaa2_con33: <DPAA2 Concentrator> at dpcon (id=39) on dpaa2_rc0 | |
| dpaa2_con33: chan_id=40, priorities=2 | |
| dpaa2_con34: <DPAA2 Concentrator> at dpcon (id=38) on dpaa2_rc0 | |
| dpaa2_con34: chan_id=39, priorities=2 | |
| dpaa2_con35: <DPAA2 Concentrator> at dpcon (id=37) on dpaa2_rc0 | |
| dpaa2_con35: chan_id=38, priorities=2 | |
| dpaa2_con36: <DPAA2 Concentrator> at dpcon (id=36) on dpaa2_rc0 | |
| dpaa2_con36: chan_id=37, priorities=2 | |
| dpaa2_con37: <DPAA2 Concentrator> at dpcon (id=35) on dpaa2_rc0 | |
| dpaa2_con37: chan_id=36, priorities=2 | |
| dpaa2_con38: <DPAA2 Concentrator> at dpcon (id=34) on dpaa2_rc0 | |
| dpaa2_con38: chan_id=35, priorities=2 | |
| dpaa2_con39: <DPAA2 Concentrator> at dpcon (id=33) on dpaa2_rc0 | |
| dpaa2_con39: chan_id=34, priorities=2 | |
| dpaa2_con40: <DPAA2 Concentrator> at dpcon (id=32) on dpaa2_rc0 | |
| dpaa2_con40: chan_id=33, priorities=2 | |
| dpaa2_con41: <DPAA2 Concentrator> at dpcon (id=31) on dpaa2_rc0 | |
| dpaa2_con41: chan_id=32, priorities=2 | |
| dpaa2_con42: <DPAA2 Concentrator> at dpcon (id=30) on dpaa2_rc0 | |
| dpaa2_con42: chan_id=31, priorities=2 | |
| dpaa2_con43: <DPAA2 Concentrator> at dpcon (id=29) on dpaa2_rc0 | |
| dpaa2_con43: chan_id=30, priorities=2 | |
| dpaa2_con44: <DPAA2 Concentrator> at dpcon (id=28) on dpaa2_rc0 | |
| dpaa2_con44: chan_id=29, priorities=2 | |
| dpaa2_con45: <DPAA2 Concentrator> at dpcon (id=27) on dpaa2_rc0 | |
| dpaa2_con45: chan_id=28, priorities=2 | |
| dpaa2_con46: <DPAA2 Concentrator> at dpcon (id=26) on dpaa2_rc0 | |
| dpaa2_con46: chan_id=27, priorities=2 | |
| dpaa2_con47: <DPAA2 Concentrator> at dpcon (id=25) on dpaa2_rc0 | |
| dpaa2_con47: chan_id=26, priorities=2 | |
| dpaa2_con48: <DPAA2 Concentrator> at dpcon (id=24) on dpaa2_rc0 | |
| dpaa2_con48: chan_id=25, priorities=2 | |
| dpaa2_con49: <DPAA2 Concentrator> at dpcon (id=23) on dpaa2_rc0 | |
| dpaa2_con49: chan_id=24, priorities=2 | |
| dpaa2_con50: <DPAA2 Concentrator> at dpcon (id=22) on dpaa2_rc0 | |
| dpaa2_con50: chan_id=23, priorities=2 | |
| dpaa2_con51: <DPAA2 Concentrator> at dpcon (id=21) on dpaa2_rc0 | |
| dpaa2_con51: chan_id=22, priorities=2 | |
| dpaa2_con52: <DPAA2 Concentrator> at dpcon (id=20) on dpaa2_rc0 | |
| dpaa2_con52: chan_id=21, priorities=2 | |
| dpaa2_con53: <DPAA2 Concentrator> at dpcon (id=19) on dpaa2_rc0 | |
| dpaa2_con53: chan_id=20, priorities=2 | |
| dpaa2_con54: <DPAA2 Concentrator> at dpcon (id=18) on dpaa2_rc0 | |
| dpaa2_con54: chan_id=19, priorities=2 | |
| dpaa2_con55: <DPAA2 Concentrator> at dpcon (id=17) on dpaa2_rc0 | |
| dpaa2_con55: chan_id=18, priorities=2 | |
| dpaa2_con56: <DPAA2 Concentrator> at dpcon (id=16) on dpaa2_rc0 | |
| dpaa2_con56: chan_id=17, priorities=2 | |
| dpaa2_con57: <DPAA2 Concentrator> at dpcon (id=15) on dpaa2_rc0 | |
| dpaa2_con57: chan_id=16, priorities=2 | |
| dpaa2_con58: <DPAA2 Concentrator> at dpcon (id=14) on dpaa2_rc0 | |
| dpaa2_con58: chan_id=15, priorities=2 | |
| dpaa2_con59: <DPAA2 Concentrator> at dpcon (id=13) on dpaa2_rc0 | |
| dpaa2_con59: chan_id=14, priorities=2 | |
| dpaa2_con60: <DPAA2 Concentrator> at dpcon (id=12) on dpaa2_rc0 | |
| dpaa2_con60: chan_id=13, priorities=2 | |
| dpaa2_con61: <DPAA2 Concentrator> at dpcon (id=11) on dpaa2_rc0 | |
| dpaa2_con61: chan_id=12, priorities=2 | |
| dpaa2_con62: <DPAA2 Concentrator> at dpcon (id=10) on dpaa2_rc0 | |
| dpaa2_con62: chan_id=11, priorities=2 | |
| dpaa2_con63: <DPAA2 Concentrator> at dpcon (id=9) on dpaa2_rc0 | |
| dpaa2_con63: chan_id=10, priorities=2 | |
| dpaa2_con64: <DPAA2 Concentrator> at dpcon (id=8) on dpaa2_rc0 | |
| dpaa2_con64: chan_id=9, priorities=2 | |
| dpaa2_con65: <DPAA2 Concentrator> at dpcon (id=7) on dpaa2_rc0 | |
| dpaa2_con65: chan_id=8, priorities=2 | |
| dpaa2_con66: <DPAA2 Concentrator> at dpcon (id=6) on dpaa2_rc0 | |
| dpaa2_con66: chan_id=7, priorities=2 | |
| dpaa2_con67: <DPAA2 Concentrator> at dpcon (id=5) on dpaa2_rc0 | |
| dpaa2_con67: chan_id=6, priorities=2 | |
| dpaa2_con68: <DPAA2 Concentrator> at dpcon (id=4) on dpaa2_rc0 | |
| dpaa2_con68: chan_id=5, priorities=2 | |
| dpaa2_con69: <DPAA2 Concentrator> at dpcon (id=3) on dpaa2_rc0 | |
| dpaa2_con69: chan_id=4, priorities=2 | |
| dpaa2_con70: <DPAA2 Concentrator> at dpcon (id=2) on dpaa2_rc0 | |
| dpaa2_con70: chan_id=3, priorities=2 | |
| dpaa2_con71: <DPAA2 Concentrator> at dpcon (id=1) on dpaa2_rc0 | |
| dpaa2_con71: chan_id=2, priorities=2 | |
| dpaa2_con72: <DPAA2 Concentrator> at dpcon (id=0) on dpaa2_rc0 | |
| dpaa2_con72: chan_id=1, priorities=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=18) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=19) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=20) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=21) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=22) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=23) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Failed to obtain a free dpcon (rid=24) for: dpni (id=0) | |
| dpaa2_rc0: dpaa2_rc_add_res() failed: error=2 | |
| dpaa2_rc0: Skip unsupported DPAA2 object: index=30, objects=146 | |
| dpaa2_ni0: <DPAA2 Network Interface> dpio (id=3-8,1-2) dpbp (id=0) dpcon (id=13-20) at dpni (id=9) on dpaa2_rc0 | |
| dpaa2_ni0: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni0: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni0: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni0: key sizes: qos=0 fs=56 | |
| dpaa2_ni0: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni0: Tx data offset=192 | |
| dpaa2_ni0: connected to dpmac (id=7) | |
| dpaa2_ni0: connected DPMAC is in FIXED mode | |
| dpaa2_ni0: Ingress traffic classification is not supported | |
| dpaa2_ni0: channels=1 | |
| dpaa2_ni0: channel: dpio_id=3 dpcon_id=13 chan_id=14, priorities=2 | |
| dpaa2_ni0: Ingress traffic distribution not supported | |
| dpaa2_ni0: Using IRQ 132 for MSI | |
| dpni0: bpf attached | |
| dpni0: Ethernet address: 00:0a:fa:24:2b:1f | |
| dpaa2_ni1: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=1) dpcon (id=21,3-9) at dpni (id=8) on dpaa2_rc0 | |
| dpaa2_ni1: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni1: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni1: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni1: key sizes: qos=0 fs=56 | |
| dpaa2_ni1: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni1: Tx data offset=192 | |
| dpaa2_ni1: connected to dpmac (id=8) | |
| dpaa2_ni1: connected DPMAC is in FIXED mode | |
| dpaa2_ni1: Ingress traffic classification is not supported | |
| dpaa2_ni1: channels=1 | |
| dpaa2_ni1: channel: dpio_id=8 dpcon_id=21 chan_id=22, priorities=2 | |
| dpaa2_ni1: Ingress traffic distribution not supported | |
| dpaa2_ni1: Using IRQ 133 for MSI | |
| dpni1: bpf attached | |
| dpni1: Ethernet address: 00:0a:fa:24:2b:20 | |
| dpaa2_ni2: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=2) dpcon (id=10-12,0-2,67-68) at dpni (id=7) on dpaa2_rc0 | |
| dpaa2_ni2: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni2: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni2: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni2: key sizes: qos=0 fs=56 | |
| dpaa2_ni2: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni2: Tx data offset=192 | |
| dpaa2_ni2: connected to dpmac (id=9) | |
| dpaa2_ni2: connected DPMAC is in FIXED mode | |
| dpaa2_ni2: Ingress traffic classification is not supported | |
| dpaa2_ni2: channels=1 | |
| dpaa2_ni2: channel: dpio_id=8 dpcon_id=10 chan_id=11, priorities=2 | |
| dpaa2_ni2: Ingress traffic distribution not supported | |
| dpaa2_ni2: Using IRQ 134 for MSI | |
| dpni2: bpf attached | |
| dpni2: Ethernet address: 00:0a:fa:24:2b:21 | |
| dpaa2_ni3: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=3) dpcon (id=69-72,52-53,55,54) at dpni (id=6) on dpaa2_rc0 | |
| dpaa2_ni3: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni3: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni3: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni3: key sizes: qos=0 fs=56 | |
| dpaa2_ni3: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni3: Tx data offset=192 | |
| dpaa2_ni3: connected to dpmac (id=10) | |
| dpaa2_ni3: connected DPMAC is in FIXED mode | |
| dpaa2_ni3: Ingress traffic classification is not supported | |
| dpaa2_ni3: channels=1 | |
| dpaa2_ni3: channel: dpio_id=8 dpcon_id=69 chan_id=70, priorities=2 | |
| dpaa2_ni3: Ingress traffic distribution not supported | |
| dpaa2_ni3: Using IRQ 135 for MSI | |
| dpni3: bpf attached | |
| dpni3: Ethernet address: 00:0a:fa:24:2b:22 | |
| dpaa2_ni4: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=4) dpcon (id=56-63) at dpni (id=5) on dpaa2_rc0 | |
| dpaa2_ni4: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni4: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni4: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni4: key sizes: qos=0 fs=56 | |
| dpaa2_ni4: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni4: Tx data offset=192 | |
| dpaa2_ni4: connected to dpmac (id=3) | |
| dpaa2_ni4: connected DPMAC is in FIXED mode | |
| dpaa2_ni4: Ingress traffic classification is not supported | |
| dpaa2_ni4: channels=1 | |
| dpaa2_ni4: channel: dpio_id=8 dpcon_id=56 chan_id=57, priorities=2 | |
| dpaa2_ni4: Ingress traffic distribution not supported | |
| dpaa2_ni4: Using IRQ 136 for MSI | |
| dpni4: bpf attached | |
| dpni4: Ethernet address: 00:0a:fa:24:2b:23 | |
| dpaa2_ni5: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=5) dpcon (id=64-66,37-41) at dpni (id=4) on dpaa2_rc0 | |
| dpaa2_ni5: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni5: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni5: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni5: key sizes: qos=0 fs=56 | |
| dpaa2_ni5: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni5: Tx data offset=192 | |
| dpaa2_ni5: connected to dpmac (id=4) | |
| dpaa2_ni5: connected DPMAC is in FIXED mode | |
| dpaa2_ni5: Ingress traffic classification is not supported | |
| dpaa2_ni5: channels=1 | |
| dpaa2_ni5: channel: dpio_id=8 dpcon_id=64 chan_id=65, priorities=2 | |
| dpaa2_ni5: Ingress traffic distribution not supported | |
| dpaa2_ni5: Using IRQ 137 for MSI | |
| dpni5: bpf attached | |
| dpni5: Ethernet address: 00:0a:fa:24:2b:24 | |
| dpaa2_ni6: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=6) dpcon (id=42-49) at dpni (id=3) on dpaa2_rc0 | |
| dpaa2_ni6: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni6: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni6: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni6: key sizes: qos=0 fs=56 | |
| dpaa2_ni6: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni6: Tx data offset=192 | |
| dpaa2_ni6: connected to dpmac (id=5) | |
| dpaa2_ni6: connected DPMAC is in FIXED mode | |
| dpaa2_ni6: Ingress traffic classification is not supported | |
| dpaa2_ni6: channels=1 | |
| dpaa2_ni6: channel: dpio_id=8 dpcon_id=42 chan_id=43, priorities=2 | |
| dpaa2_ni6: Ingress traffic distribution not supported | |
| dpaa2_ni6: Using IRQ 138 for MSI | |
| dpni6: bpf attached | |
| dpni6: Ethernet address: 00:0a:fa:24:2b:25 | |
| dpaa2_ni7: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=7) dpcon (id=50-51,22-27) at dpni (id=2) on dpaa2_rc0 | |
| dpaa2_ni7: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni7: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni7: table entries: mac=16 vlan=0 qos=0 fs=1 | |
| dpaa2_ni7: key sizes: qos=0 fs=56 | |
| dpaa2_ni7: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni7: Tx data offset=192 | |
| dpaa2_ni7: connected to dpmac (id=6) | |
| dpaa2_ni7: connected DPMAC is in FIXED mode | |
| dpaa2_ni7: Ingress traffic classification is not supported | |
| dpaa2_ni7: channels=1 | |
| dpaa2_ni7: channel: dpio_id=8 dpcon_id=50 chan_id=51, priorities=2 | |
| dpaa2_ni7: Ingress traffic distribution not supported | |
| dpaa2_ni7: Using IRQ 139 for MSI | |
| dpni7: bpf attached | |
| dpni7: Ethernet address: 00:0a:fa:24:2b:26 | |
| dpaa2_ni8: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=8) dpcon (id=28-35) at dpni (id=1) on dpaa2_rc0 | |
| dpaa2_ni8: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni8: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni8: table entries: mac=16 vlan=0 qos=0 fs=32 | |
| dpaa2_ni8: key sizes: qos=0 fs=56 | |
| dpaa2_ni8: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni8: Tx data offset=192 | |
| dpaa2_ni8: connected to dpmac (id=2) | |
| dpaa2_ni8: connected DPMAC is in FIXED mode | |
| dpaa2_ni8: Ingress traffic classification is not supported | |
| dpaa2_ni8: channels=1 | |
| dpaa2_ni8: channel: dpio_id=8 dpcon_id=28 chan_id=29, priorities=2 | |
| dpaa2_ni8: Ingress traffic distribution not supported | |
| dpaa2_ni8: Using IRQ 140 for MSI | |
| dpni8: bpf attached | |
| dpni8: Ethernet address: 00:0a:fa:24:2b:28 | |
| dpaa2_ni9: <DPAA2 Network Interface> dpio (id=8,7,6,5,4,3,2,1) dpbp (id=9) dpcon (id=36) at dpni (id=0) on dpaa2_rc0 | |
| dpaa2_ni9: options=0x0 queues=1 tx_channels=0 wriop_version=0x422 | |
| dpaa2_ni9: traffic classes: rx=1 tx=1 cgs_groups=1 | |
| dpaa2_ni9: table entries: mac=16 vlan=0 qos=0 fs=32 | |
| dpaa2_ni9: key sizes: qos=0 fs=56 | |
| dpaa2_ni9: Rx/Tx buffers: size=9216, alignment=64 | |
| dpaa2_ni9: Tx data offset=192 | |
| dpaa2_ni9: connected to dpmac (id=1) | |
| dpaa2_ni9: connected DPMAC is in FIXED mode | |
| dpaa2_ni9: Ingress traffic classification is not supported | |
| dpaa2_ni9: channels=1 | |
| dpaa2_ni9: channel: dpio_id=8 dpcon_id=36 chan_id=37, priorities=2 | |
| dpaa2_ni9: Ingress traffic distribution not supported | |
| dpaa2_ni9: Using IRQ 141 for MSI | |
| dpni9: bpf attached | |
| dpni9: Ethernet address: 00:0a:fa:24:2b:27 | |
| simplebus0: <power-controller@1e34040> mem 0x1e34040-0x1e34057 compat fsl,ls1088a-rcpm (no driver attached) | |
| simplebus0: <timer@2800000> mem 0x2800000-0x280ffff irq 104 compat fsl,ls1088a-ftm-alarm (no driver attached) | |
| ofwbus0: <buttons> compat gpio-keys (no driver attached) | |
| gpioled0: <GPIO LEDs> on ofwbus0 | |
| gpioled0: <ten64:admin> failed to map pin | |
| ofwbus0: <dpmac2_sfp> disabled compat sff,sfp (no driver attached) | |
| ofwbus0: <dpmac1_sfp> disabled compat sff,sfp (no driver attached) | |
| armv8crypto0: <AES-CBC,AES-XTS,AES-GCM> | |
| crypto: assign armv8crypto0 driver id 0, flags 0xe000000 | |
| crypto: assign cryptosoft0 driver id 1, flags 0x6000000 | |
| Device configuration finished. | |
| Found SMCCC version 1.1 | |
| procfs registered | |
| Timecounters tick every 1.000 msec | |
| ZFS filesystem version: 5 | |
| ZFS storage pool version: features support (5000) | |
| vlan: initialized, using hash tables with chaining | |
| lo0: bpf attached | |
| crypto: <crypto device> | |
| IPsec: Initialized Security Association Processing. | |
| tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 | |
| usbus0: 5.0Gbps Super Speed USB v3.0 | |
| usbus1: 5.0Gbps Super Speed USB v3.0 | |
| ugen0.1: <Synopsys XHCI root HUB> at usbus0 | |
| uhub0 on usbus0 | |
| uhub0: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
| ugen1.1: <Synopsys XHCI root HUB> at usbus1 | |
| uhub1 on usbus1 | |
| uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 | |
| CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 | |
| Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> | |
| Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> | |
| Instruction Set Attributes 1 = <> | |
| Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> | |
| Processor Features 1 = <> | |
| Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> | |
| Memory Model Features 1 = <8bit VMID> | |
| Memory Model Features 2 = <32bit CCIDX,48bit VA> | |
| Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> | |
| Debug Features 1 = <> | |
| Auxiliary Features 0 = <> | |
| Auxiliary Features 1 = <> | |
| AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL> | |
| AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD> | |
| AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> | |
| CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 | |
| CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 | |
| CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 | |
| CPU 4: ARM Cortex-A53 r0p4 affinity: 1 0 | |
| CPU 5: ARM Cortex-A53 r0p4 affinity: 1 1 | |
| Trying to mount root from zfs:zfs-basepool/ROOT/default []... | |
| CPU 6: ARM Cortex-A53 r0p4 affinity: 1 2 | |
| CPU 7: ARM Cortex-A53 r0p4 affinity: 1 3 | |
| Release APs...gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: Start searching for Re-Distributor | |
| gic0: CPU7 Re-Distributor has been found | |
| gic0: CPU5 Re-Distributor has been found | |
| gic0: CPU4 Re-Distributor has been found | |
| gic0: CPU6 Re-Distributor has been found | |
| gic0: CPU3 Re-Distributor has been found | |
| gic0: CPU1 Re-Distributor has been found | |
| gic0: CPU2 Re-Distributor has been found | |
| gic0: CPU7 Re-Distributor woke up | |
| gic0: CPU3 Re-Distributor woke up | |
| gic0: CPU4 Re-Distributor woke up | |
| gic0: CPU5 Re-Distributor woke up | |
| gic0: CPU6 Re-Distributor woke up | |
| gic0: CPU1 Re-Distributor woke up | |
| gic0: CPU2 Re-Distributor woke up | |
| gic0: CPU7 enabled CPU interface via system registers | |
| gic0: CPU3 enabled CPU interface via system registers | |
| gic0: CPU4 enabled CPU interface via system registers | |
| gic0: CPU5 enabled CPU interface via system registers | |
| gic0: CPU6 enabled CPU interface via system registers | |
| gic0: CPU1 enabled CPU interface via system registers | |
| gic0: CPU2 enabled CPU interface via system registers | |
| done | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| pass0 at nvme0 bus 0 scbus0 target 0 lun 1 | |
| regulator: shutting down unused regulators | |
| pass0: <SAMSUNG MZVL2256HCHQ-00B00 GXA7301Q S674NE0NC02495> | |
| pass0: Serial Number S674NE0NC02495 | |
| pass0: nvme version 1.3 x2 (max x4) lanes PCIe Gen3 (max Gen4) link | |
| nda0 at nvme0 bus 0 scbus0 target 0 lun 1 | |
| GEOM: new disk nda0 | |
| nda0: <SAMSUNG MZVL2256HCHQ-00B00 GXA7301Q S674NE0NC02495> | |
| nda0: Serial Number S674NE0NC02495 | |
| nda0: nvme version 1.3 x2 (max x4) lanes PCIe Gen3 (max Gen4) link | |
| nda0: 244198MB (500118192 512 byte sectors) | |
| uhub1: 2 ports with 2 removable, self powered | |
| uhub0: 2 ports with 2 removable, self powered | |
| ugen1.2: <Microchip Tech USB2744> at usbus1 | |
| uhub2 on uhub1 | |
| uhub2: <Microchip Tech USB2744, class 9/0, rev 2.10/2.08, addr 1> on usbus1 | |
| uhub2: MTT enabled | |
| Root mount waiting for: usbus1 | |
| uhub2: 4 ports with 1 removable, self powered | |
| ugen1.3: <Microchip Tech USB5744> at usbus1 | |
| uhub3 on uhub1 | |
| uhub3: <Microchip Tech USB5744, class 9/0, rev 3.10/2.08, addr 2> on usbus1 | |
| Root mount waiting for: usbus1 | |
| uhub3: 4 ports with 1 removable, self powered | |
| Warning: no time-of-day clock registered, system time will not be set accurately | |
| start_init: trying /sbin/init | |
| lo0: link state changed to UP | |
| dpni0: link state changed to UP | |
| dpni1: link state changed to UP | |
| dpni2: link state changed to UP | |
| dpni3: link state changed to UP | |
| dpni4: link state changed to UP | |
| dpni5: link state changed to UP | |
| dpni6: link state changed to UP | |
| dpni7: link state changed to UP | |
| dpni8: link state changed to UP | |
| dpni9: link state changed to UP |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
ifconfig output (only one UTP cable is connected to dpni4):