gateway.dmesg

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073]
[    0.000000] Linux version 4.19.152-al-linux-v10.2.0-v1.10.0-13.3677-0ebe4e7 (builder@xenial-builder) (gcc version 6.4.0 (Buildroot 0.9.0.0)) #1 SMP Wed Jun 9 10:49:47 UTC 2021
[    0.000000] Machine model: Annapurna Labs Alpine V2 UBNT
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] On node 0 totalpages: 1048575
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 786431 pages, LIFO batch:63
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] random: get_random_bytes called from start_kernel+0xb0/0x45c with crng_init=0
[    0.000000] percpu: Embedded 22 pages/cpu s49944 r8192 d31976 u90112
[    0.000000] pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] CPU features: enabling workaround for EL2 vector hardening
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032191
[    0.000000] Kernel command line: root=/dev/sdb3 rootfstype=squashfs rootwait pci=pcie_bus_perf console=ttyS0,115200 panic=3 reboot=cold
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[    0.000000] Memory: 4040240K/4194300K available (9532K kernel code, 970K rwdata, 2560K rodata, 1024K init, 325K bss, 154060K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 32446 entries in 127 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f0280000
[    0.000000] arch_timer: cp15 timer(s) running at 58.33MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ae82a6a7f, max_idle_ns: 881590413063 ns
[    0.000002] sched_clock: 56 bits at 58MHz, resolution 17ns, wraps every 4398046511097ns
[    0.000141] Console: colour dummy device 80x25
[    0.000153] Calibrating delay loop (skipped), value calculated using timer frequency.. 116.66 BogoMIPS (lpj=233333)
[    0.000157] pid_max: default: 32768 minimum: 301
[    0.000213] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000226] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000677] ASID allocator initialised with 32768 entries
[    0.000710] rcu: Hierarchical SRCU implementation.
[    0.000939] EFI services will not be available.
[    0.001020] smp: Bringing up secondary CPUs ...
[    0.001179] Detected PIPT I-cache on CPU1
[    0.001191] GICv3: CPU1: found redistributor 1 region 0:0x00000000f02a0000
[    0.001202] CPU1: Booted secondary processor 0x0000000001 [0x411fd073]
[    0.001394] Detected PIPT I-cache on CPU2
[    0.001404] GICv3: CPU2: found redistributor 2 region 0:0x00000000f02c0000
[    0.001413] CPU2: Booted secondary processor 0x0000000002 [0x411fd073]
[    0.001588] Detected PIPT I-cache on CPU3
[    0.001598] GICv3: CPU3: found redistributor 3 region 0:0x00000000f02e0000
[    0.001607] CPU3: Booted secondary processor 0x0000000003 [0x411fd073]
[    0.001635] smp: Brought up 1 node, 4 CPUs
[    0.001637] SMP: Total of 4 processors activated.
[    0.001640] CPU features: detected: GIC system register CPU interface
[    0.001642] CPU features: detected: 32-bit EL0 Support
[    0.001661] CPU: All CPU(s) started at EL2
[    0.001669] alternatives: patching kernel code
[    0.002204] devtmpfs: initialized
[    0.004232] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.004237] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.004434] DMI not present or invalid.
[    0.004548] NET: Registered protocol family 16
[    0.004881] cpuidle: using governor menu
[    0.004977] DMA: preallocated 256 KiB pool for atomic allocations
[    0.005014] Initializing Peripheral Bus System - PBS
[    0.011856] console [pstore-1] enabled
[    0.011908] pstore: Registered ramoops as persistent store backend
[    0.011910] ramoops: attached 0x18000@0x10000000, ecc: 16/0
[    0.015496] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.015735] vgaarb: loaded
[    0.015807] SCSI subsystem initialized
[    0.015864] libata version 3.00 loaded.
[    0.015920] usbcore: registered new interface driver usbfs
[    0.015934] usbcore: registered new interface driver hub
[    0.015952] usbcore: registered new device driver usb
[    0.018304] pps_core: LinuxPPS API ver. 1 registered
[    0.018306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.018312] PTP clock support registered
[    0.018345] Advanced Linux Sound Architecture Driver Initialized.
[    0.018502] Bluetooth: Core ver 2.22
[    0.018514] NET: Registered protocol family 31
[    0.018515] Bluetooth: HCI device and connection manager initialized
[    0.018518] Bluetooth: HCI socket layer initialized
[    0.018521] Bluetooth: L2CAP socket layer initialized
[    0.018530] Bluetooth: SCO socket layer initialized
[    0.018645] clocksource: Switched to clocksource arch_sys_counter
[    0.033186] NET: Registered protocol family 2
[    0.033384] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.033396] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.033469] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.033594] TCP: Hash tables configured (established 32768 bind 32768)
[    0.033645] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.033661] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.033724] NET: Registered protocol family 1
[    0.033885] PCI: CLS 0 bytes, default 64
[    0.034295] Initialise system trusted keyrings
[    0.034350] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.036528] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.569857] Key type asymmetric registered
[    0.569860] Asymmetric key parser 'x509' registered
[    0.569878] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.569881] io scheduler noop registered
[    0.569882] io scheduler deadline registered
[    0.569931] io scheduler cfq registered (default)
[    0.569934] io scheduler mq-deadline registered
[    0.569936] io scheduler kyber registered
[    0.570166] pl061_gpio fd887000.gpio0: PL061 GPIO chip @0x00000000fd887000 registered
[    0.570252] pl061_gpio fd888000.gpio1: PL061 GPIO chip @0x00000000fd888000 registered
[    0.570331] pl061_gpio fd889000.gpio2: PL061 GPIO chip @0x00000000fd889000 registered
[    0.570412] pl061_gpio fd88a000.gpio3: PL061 GPIO chip @0x00000000fd88a000 registered
[    0.570487] pl061_gpio fd88b000.gpio4: PL061 GPIO chip @0x00000000fd88b000 registered
[    0.570566] pl061_gpio fd897000.gpio5: PL061 GPIO chip @0x00000000fd897000 registered
[    0.570666] al-sgpo fd8b4000.sgpo: Alpine SGPO driver probed.
[    0.570747] al-internal-pcie fbc00000.pcie-internal: host bridge /soc/pcie-internal ranges:
[    0.570757] al-internal-pcie fbc00000.pcie-internal:   MEM 0xfe000000..0xfeffffff -> 0xfe000000
[    0.570799] al-internal-pcie fbc00000.pcie-internal: PCI host bridge to bus 0000:00
[    0.570803] pci_bus 0000:00: root bus resource [bus 00]
[    0.570806] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
[    0.570817] pci 0000:00:00.0: [1c36:0002] type 00 class 0x020000
[    0.570828] pci 0000:00:00.0: reg 0x10: [mem 0xfe000000-0xfe01ffff 64bit]
[    0.570833] pci 0000:00:00.0: reg 0x18: [mem 0xfe020000-0xfe020fff 64bit]
[    0.570838] pci 0000:00:00.0: reg 0x20: [mem 0xfe030000-0xfe03ffff 64bit]
[    0.570857] pci 0000:00:00.0: PME# supported from D3hot D3cold
[    0.570866] pci 0000:00:00.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.570870] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0005ffff 64bit] (contains BAR0 for 3 VFs)
[    0.571010] pci 0000:00:01.0: [1c36:0001] type 00 class 0x020000
[    0.571019] pci 0000:00:01.0: reg 0x10: [mem 0xfe040000-0xfe05ffff 64bit]
[    0.571024] pci 0000:00:01.0: reg 0x18: [mem 0xfe060000-0xfe060fff 64bit]
[    0.571029] pci 0000:00:01.0: reg 0x20: [mem 0xfe064000-0xfe067fff 64bit]
[    0.571045] pci 0000:00:01.0: PME# supported from D3hot D3cold
[    0.571140] pci 0000:00:02.0: [1c36:0002] type 00 class 0x020000
[    0.571149] pci 0000:00:02.0: reg 0x10: [mem 0xfe080000-0xfe09ffff 64bit]
[    0.571154] pci 0000:00:02.0: reg 0x18: [mem 0xfe0a0000-0xfe0a0fff 64bit]
[    0.571158] pci 0000:00:02.0: reg 0x20: [mem 0xfe0b0000-0xfe0bffff 64bit]
[    0.571175] pci 0000:00:02.0: PME# supported from D3hot D3cold
[    0.571183] pci 0000:00:02.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.571186] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x0005ffff 64bit] (contains BAR0 for 3 VFs)
[    0.571287] pci 0000:00:03.0: [1c36:0001] type 00 class 0x020000
[    0.571295] pci 0000:00:03.0: reg 0x10: [mem 0xfe0c0000-0xfe0dffff 64bit]
[    0.571300] pci 0000:00:03.0: reg 0x18: [mem 0xfe0e0000-0xfe0e0fff 64bit]
[    0.571305] pci 0000:00:03.0: reg 0x20: [mem 0xfe0e4000-0xfe0e7fff 64bit]
[    0.571320] pci 0000:00:03.0: PME# supported from D3hot D3cold
[    0.571410] pci 0000:00:04.0: [1c36:0022] type 00 class 0x100000
[    0.571418] pci 0000:00:04.0: reg 0x10: [mem 0xfe100000-0xfe11ffff 64bit]
[    0.571425] pci 0000:00:04.0: reg 0x20: [mem 0xfe120000-0xfe12ffff 64bit]
[    0.571440] pci 0000:00:04.0: PME# supported from D3hot D3cold
[    0.571449] pci 0000:00:04.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.571452] pci 0000:00:04.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[    0.571550] pci 0000:00:05.0: [1c36:0022] type 00 class 0x010400
[    0.571558] pci 0000:00:05.0: reg 0x10: [mem 0xfe140000-0xfe15ffff 64bit]
[    0.571565] pci 0000:00:05.0: reg 0x20: [mem 0xfe160000-0xfe16ffff 64bit]
[    0.571580] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.571588] pci 0000:00:05.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.571592] pci 0000:00:05.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[    0.571793] pci 0000:00:08.0: [1c36:0031] type 00 class 0x010601
[    0.571808] pci 0000:00:08.0: reg 0x24: [mem 0xfe170000-0xfe173fff]
[    0.571824] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.573063] pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
[    0.573068] pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
[    0.573072] pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
[    0.573077] pci 0000:00:02.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
[    0.573082] pci 0000:00:02.0: BAR 7: assigned [mem 0xfe0c0000-0xfe11ffff 64bit]
[    0.573085] pci 0000:00:03.0: BAR 0: assigned [mem 0xfe120000-0xfe13ffff 64bit]
[    0.573090] pci 0000:00:04.0: BAR 0: assigned [mem 0xfe140000-0xfe15ffff 64bit]
[    0.573095] pci 0000:00:04.0: BAR 7: assigned [mem 0xfe160000-0xfe17ffff 64bit]
[    0.573099] pci 0000:00:05.0: BAR 0: assigned [mem 0xfe180000-0xfe19ffff 64bit]
[    0.573103] pci 0000:00:05.0: BAR 7: assigned [mem 0xfe1a0000-0xfe1bffff 64bit]
[    0.573107] pci 0000:00:00.0: BAR 4: assigned [mem 0xfe1c0000-0xfe1cffff 64bit]
[    0.573112] pci 0000:00:02.0: BAR 4: assigned [mem 0xfe1d0000-0xfe1dffff 64bit]
[    0.573117] pci 0000:00:04.0: BAR 4: assigned [mem 0xfe1e0000-0xfe1effff 64bit]
[    0.573121] pci 0000:00:05.0: BAR 4: assigned [mem 0xfe1f0000-0xfe1fffff 64bit]
[    0.573126] pci 0000:00:01.0: BAR 4: assigned [mem 0xfe200000-0xfe203fff 64bit]
[    0.573131] pci 0000:00:03.0: BAR 4: assigned [mem 0xfe204000-0xfe207fff 64bit]
[    0.573135] pci 0000:00:08.0: BAR 5: assigned [mem 0xfe208000-0xfe20bfff]
[    0.573139] pci 0000:00:00.0: BAR 2: assigned [mem 0xfe20c000-0xfe20cfff 64bit]
[    0.573144] pci 0000:00:01.0: BAR 2: assigned [mem 0xfe20d000-0xfe20dfff 64bit]
[    0.573149] pci 0000:00:02.0: BAR 2: assigned [mem 0xfe20e000-0xfe20efff 64bit]
[    0.573154] pci 0000:00:03.0: BAR 2: assigned [mem 0xfe20f000-0xfe20ffff 64bit]
[    0.573183] pci-pf-stub 0000:00:04.0: writing to VF config space
[    0.573228] pci-pf-stub 0000:00:04.0: claimed by pci-pf-stub
[    0.573244] pci-pf-stub 0000:00:05.0: writing to VF config space
[    0.573313] pci-pf-stub 0000:00:05.0: claimed by pci-pf-stub
[    0.573394] al-external-pcie fd800000.pcie-external0: host bridge /soc/pcie-external0 ranges:
[    0.573403] al-external-pcie fd800000.pcie-external0:   err 0xfb600000..0xfb6fffff -> 0xfb600000
[    0.573411] al-external-pcie fd800000.pcie-external0:    IO 0xc0000000..0xc000ffff -> 0x00010000
[    0.573417] al-external-pcie fd800000.pcie-external0:   MEM 0xc0010000..0xc7ffffff -> 0xc0010000
[    0.573443] al-external-pcie fd800000.pcie-external0: link up: speed Gen 1 width x1
[    0.573446] al-external-pcie fd800000.pcie-external0: link up: speed Gen 1 width x1
[    0.573449] PCIe 0: setting OB iATU even after link is started
[    0.573492] al-external-pcie fd800000.pcie-external0: PCI host bridge to bus 0001:00
[    0.573495] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.573498] pci_bus 0001:00: root bus resource [??? 0xfb600000-0xfb6fffff flags 0x0]
[    0.573502] pci_bus 0001:00: root bus resource [io  0x0000-0xffff] (bus address [0x10000-0x1ffff])
[    0.573505] pci_bus 0001:00: root bus resource [mem 0xc0010000-0xc7ffffff]
[    0.573517] pci 0001:00:00.0: [1c36:0031] type 01 class 0x060400
[    0.573529] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    0.573534] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    0.573539] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    0.573572] pci 0001:00:00.0: supports D1
[    0.573575] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.574746] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.574813] pci 0001:01:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.574857] pci 0001:01:00.0: reg 0x10: [mem 0xc0000000-0xc0007fff 64bit]
[    0.575026] pci 0001:01:00.0: PME# supported from D3cold
[    0.575062] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    0.576184] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.576193] pci 0001:00:00.0: BAR 0: assigned [mem 0xc0100000-0xc01fffff]
[    0.576198] pci 0001:00:00.0: BAR 14: assigned [mem 0xc0200000-0xc02fffff]
[    0.576201] pci 0001:00:00.0: BAR 1: assigned [mem 0xc0010000-0xc001ffff]
[    0.576205] pci 0001:00:00.0: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[    0.576209] pci 0001:01:00.0: BAR 0: assigned [mem 0xc0200000-0xc0207fff 64bit]
[    0.576225] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.576228] pci 0001:00:00.0:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.576237] pci 0001:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    0.576261] pci 0001:01:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  256
[    0.576264] pci 0001:00:00.0: AL PCIe bridge quirk detected, disable MSI(X)
[    0.576554] al_dma: Annapurna Labs DMA Driver 0.01
[    0.577414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.577849] console [ttyS0] disabled
[    0.577865] fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 23, base_baud = 31250000) is a 16550A
[    0.589917] console [ttyS0] enabled
[    0.590077] fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 24, base_baud = 31250000) is a 16550A
[    0.590224] fd885000.uart2: ttyS2 at MMIO 0xfd885000 (irq = 25, base_baud = 31250000) is a 16550A
[    0.590700] resvmem-reboot-reason soc:reboot-reason: Allocated reserved memory, vaddr: 0x8EED000, paddr: 0x10020000
[    0.590808] ahci 0000:00:08.0: version 3.0
[    0.590825] ahci 0000:00:08.0: controller can't do PMP, turning off CAP_PMP
[    0.590998] ahci 0000:00:08.0: SSS flag set, parallel bus scan disabled
[    0.591014] ahci 0000:00:08.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.591019] ahci 0000:00:08.0: flags: 64bit ncq sntf stag pm led clo only fbs pio slum part ccc apst 
[    0.591022] ahci 0000:00:08.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[    0.591555] scsi host0: ahci
[    0.591745] scsi host1: ahci
[    0.591892] scsi host2: ahci
[    0.592038] scsi host3: ahci
[    0.592129] ata1: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208100 irq 27
[    0.592132] ata2: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208180 irq 28
[    0.592135] ata3: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208200 irq 29
[    0.592137] ata4: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208280 irq 30
[    0.592162] ahci 0001:00:00.0: writing to VF config space
[    0.597645] ahci: probe of 0001:00:00.0 failed with error -22
[    0.598042] m25p80 spi0.0: found mx25u6435f, expected spi_flash_jedec_detection
[    0.598046] m25p80 spi0.0: mx25u6435f (8192 Kbytes)
[    0.598152] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.598154] Creating 5 MTD partitions on "spi0.0":
[    0.598158] 0x000000000000-0x0000001c0000 : "u-boot"
[    0.598400] 0x0000001c0000-0x0000001d0000 : "u-boot-env"
[    0.598602] 0x0000001d0000-0x0000001e0000 : "u-boot-env-2"
[    0.598809] 0x0000001e0000-0x0000001f0000 : "Factory"
[    0.599001] 0x0000001f0000-0x000000200000 : "EEPROM"
[    0.599622] libphy: Fixed MDIO Bus: probed
[    0.599624] tun: Universal TUN/TAP device driver, 1.6
[    0.599776] al_eth_drv: Initializing Peripheral Bus System (PBS) resources
[    0.599804] al_eth 0000:00:00.0: writing to VF config space
[    0.605454] al_eth 0000:00:00.0: AnnapurnaLabs unified 1GbE/10GbE/25GbE Ethernet Driver with SR-IOV al_eth v3.5.3 (Mar 14, 2019)
[    0.605461] al_eth 0000:00:00.0: driver_data is 0x0
[    0.605492] al_eth 0000:00:00.0: eth rev_id 3 (orig_rev_id 3) dev_id 2
[    0.605580] al_eth 0000:00:00.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected Yes. media 5
[    0.605584] al_eth 0000:00:00.0: al_mod_eth_function_reset: performing FLR
[    0.611527] al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe000000, mac addr fc:ec:da:77:e0:39
[    0.611544] al_eth 0000:00:01.0: writing to VF config space
[    0.617157] al_eth 0000:00:01.0: driver_data is 0x0
[    0.617182] al_eth 0000:00:01.0: eth rev_id 2 (orig_rev_id 2) dev_id 1
[    0.617264] al_eth 0000:00:01.0: Board info: phy exist Yes. phy addr 4. mdio freq 1000 Khz. SFP connected No. media 1
[    0.617267] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[    0.623024] al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe080000, mac addr fc:ec:da:77:e0:3a
[    0.623050] libphy: alpine_mdio_shared: probed
[    0.702083] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.702308] ata1.00: supports DRM functions and may not be fully accessible
[    0.702718] ata1.00: ATA-11: Samsung SSD 860 EVO 2TB, RVT03B6Q, max UDMA/133
[    0.702721] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.704376] ata1.00: supports DRM functions and may not be fully accessible
[    0.706135] ata1.00: configured for UDMA/133
[    0.706308] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  3B6Q PQ: 0 ANSI: 5
[    0.706495] ata1.00: Enabling discard_zeroes_data
[    0.706544] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.706555] sd 0:0:0:0: [sda] Write Protect is off
[    0.706559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.706574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.706756] ata1.00: Enabling discard_zeroes_data
[    0.707764]  sda: sda1
[    0.707815] ata2: SATA link down (SStatus 4 SControl 300)
[    0.708043] ata1.00: Enabling discard_zeroes_data
[    0.708124] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.708907] ata3: SATA link down (SStatus 4 SControl 300)
[    0.709991] ata4: SATA link down (SStatus 4 SControl 300)
[    0.826650] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.026647] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.226648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.426648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.626648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.826655] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.026648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.226648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.300269] al_eth 0000:00:01.0 eth1: phy[4]: device alpine_mdio_shared_8:04, driver Atheros 8031 ethernet
[    2.300272] al_eth 0000:00:01.0 eth1: phy[4]:supported 62ef adv 62ef
[    2.300290] al_eth 0000:00:02.0: writing to VF config space
[    2.305933] al_eth 0000:00:02.0: driver_data is 0x0
[    2.305965] al_eth 0000:00:02.0: eth rev_id 3 (orig_rev_id 3) dev_id 2
[    2.306092] al_eth 0000:00:02.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected Yes. media 5
[    2.306096] al_eth 0000:00:02.0: al_mod_eth_function_reset: performing FLR
[    2.312054] al_eth 0000:00:02.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe0a0000, mac addr 0a:81:e0:c9:fe:f1
[    2.312071] al_eth 0000:00:03.0: writing to VF config space
[    2.317685] al_eth 0000:00:03.0: driver_data is 0x0
[    2.317713] al_eth 0000:00:03.0: eth rev_id 2 (orig_rev_id 2) dev_id 1
[    2.317800] al_eth 0000:00:03.0: Board info: phy exist Yes. phy addr 17. mdio freq 1000 Khz. SFP connected No. media 6
[    2.317803] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[    2.323579] al_eth 0000:00:03.0 eth3: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe120000, mac addr 7e:44:3f:05:a7:aa
[    2.522648] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.522651] al_eth 0000:00:03.0 eth3: al_mod_eth_mdiobus_setup: cannot get phy device - auto probing failed.
[    3.268979] Setting 0 to s 0 m 0 rx 0 tx 0
[    3.626122] Setting 1 to s 4 m 10 rx 0 tx 0
[    4.690821] switch0: RTL8370B switch registered on alpine_mdio_shared_8
[    4.690843] al_eth 0000:00:03.0 eth3: phy[17]: device alpine_mdio_shared_8:11, driver Realtek RTL8370MB
[    4.690846] al_eth 0000:00:03.0 eth3: phy[17]:supported 62cf adv 62cf
[    4.691020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.691022] ehci-pci: EHCI PCI platform driver
[    4.691048] ehci-platform: EHCI generic platform driver
[    4.691090] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.691098] ohci-pci: OHCI PCI platform driver
[    4.691112] uhci_hcd: USB Universal Host Controller Interface driver
[    4.691191] xhci_hcd 0001:01:00.0: xHCI Host Controller
[    4.691200] xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 1
[    4.825297] xhci_hcd 0001:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[    4.825814] hub 1-0:1.0: USB hub found
[    4.825831] hub 1-0:1.0: 2 ports detected
[    4.826000] xhci_hcd 0001:01:00.0: xHCI Host Controller
[    4.826005] xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 2
[    4.826011] xhci_hcd 0001:01:00.0: Host supports USB 3.0 SuperSpeed
[    4.826075] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.826262] hub 2-0:1.0: USB hub found
[    4.826276] hub 2-0:1.0: 2 ports detected
[    4.826448] usbcore: registered new interface driver cdc_acm
[    4.826449] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    4.826475] usbcore: registered new interface driver usb-storage
[    4.826501] usbcore: registered new interface driver cp210x
[    4.826509] usbserial: USB Serial support registered for cp210x
[    4.826587] i2c /dev entries driver
[    4.830692] rtc-s35390a 1-0030: rtc core: registered rtc-s35390a as rtc0
[    4.830711] i2c i2c-0: Added multiplexed i2c bus 1
[    4.830779] i2c i2c-0: Added multiplexed i2c bus 2
[    4.830842] i2c i2c-0: Added multiplexed i2c bus 3
[    4.830948] i2c i2c-0: Added multiplexed i2c bus 4
[    4.830951] pca954x 0-0071: registered 4 multiplexed busses for I2C switch pca9546
[    4.834639] adt7475 4-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.834676] adt7475 4-002e: ADT7475 device, revision 1
[    4.834679] adt7475 4-002e: Optional features: fan4 pwm2
[    4.850532] random: fast init done
[    4.854991] al_thermal_probe: Thermal Sensor Loaded
[    4.855128] sp805-wdt fd88c000.wdt0: registration successful
[    4.855145] Bluetooth: HCI UART driver ver 2.3
[    4.855147] Bluetooth: HCI UART protocol H4 registered
[    4.855149] Bluetooth: HCI UART protocol BCSP registered
[    4.855541] usbcore: registered new interface driver usbhid
[    4.855542] usbhid: USB HID core driver
[    4.855620] usbcore: registered new interface driver snd-usb-audio
[    4.855888] IPVS: Registered protocols ()
[    4.855917] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    4.855967] IPVS: ipvs loaded.
[    4.856019] gre: GRE over IPv4 demultiplexor driver
[    4.856021] ip_gre: GRE over IPv4 tunneling driver
[    4.856420] IPv4 over IPsec tunneling driver
[    4.856781] NET: Registered protocol family 10
[    4.857312] Segment Routing with IPv6
[    4.857400] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.857573] NET: Registered protocol family 17
[    4.857589] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.857625] Bluetooth: RFCOMM socket layer initialized
[    4.857635] Bluetooth: RFCOMM ver 1.11
[    4.857639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.857642] Bluetooth: BNEP socket layer initialized
[    4.857643] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.857646] Bluetooth: HIDP socket layer initialized
[    4.857648] 8021q: 802.1Q VLAN Support v1.8
[    4.857854] registered taskstats version 1
[    4.857856] Loading compiled-in X.509 certificates
[    4.857963] pstore: Using compression: deflate
[    4.858378] Key type encrypted registered
[    4.858728] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    4.859923] rtc-s35390a 1-0030: setting system clock to 2021-06-20 23:54:23 UTC (1624233263)
[    4.859981] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.922678] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.922686] ALSA device list:
[    4.922688]   No soundcards found.
[    4.922765] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.922767] cfg80211: failed to load regulatory.db
[    4.922841] Waiting for root device /dev/sdb3...
[    5.162652] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    5.426756] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[    5.463260] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    5.497687] usb-storage 2-1:1.0: USB Mass Storage device detected
[    5.497900] scsi host4: usb-storage 2-1:1.0
[    6.500143] scsi 4:0:0:0: Direct-Access     Generic  MassStorageClass 1537 PQ: 0 ANSI: 6
[    6.656552] sd 4:0:0:0: [sdb] 30777344 512-byte logical blocks: (15.8 GB/14.7 GiB)
[    6.657427] sd 4:0:0:0: [sdb] Write Protect is off
[    6.657431] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[    6.658193] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.668637]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    6.670884] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.673751] VFS: Mounted root (squashfs filesystem) readonly on device 8:19.
[    6.675366] devtmpfs: mounted
[    6.676124] Freeing unused kernel memory: 1024K
[    6.686696] Run /sbin/init as init process
[    7.411954] EXT4-fs (sdb6): recovery complete
[    7.412623] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    7.550223] random: crng init done
[   10.057174] ubnt_common: loading out-of-tree module taints kernel.
[   10.057181] ubnt_common: module license 'Proprietary' taints kernel.
[   10.057183] Disabling lock debugging due to kernel taint
[   10.060385] [UBNT_STA_HT] Initialize hash table
[   10.060407] [UBNT_STA_HT] done
[   10.060409] creating /proc/ubnt_peek/
[   10.060415] creating /proc/ubnt_peek/peek_disable
[   10.060417] creating /proc/ubnt_peek/loop_check
[   10.060419] creating /proc/ubnt_peek/loop_debug
[   10.060421] creating /proc/ubnt_peek/loop_uif
[   10.060423] creating /proc/ubnt_peek/tcp_debug_mac
[   10.060426] creating /proc/ubnt_peek/tcp_debug_connections
[   10.060432] qos: registered
[   10.060433] creating /proc/ubnt_frame_id/
[   10.060436] creating /proc/ubnt_frame_id/netdevs
[   10.112067] ubnthal: Ubiquiti UniFi Dream Machine PRO
[   10.113088] creating procfs for ubnthal
[   10.113095] creating proc entry for system.info
[   10.113097] creating proc entry for board
[   10.124308] Unable to find matching dts node.
[   10.124314] creating procfs for status
[   10.124319] creating proc entry for IsDefault
[   10.124322] creating proc entry for IsLocated
[   10.124324] creating proc entry for IsIsolated
[   10.124326] creating proc entry for IsLte
[   10.124328] creating proc entry for ControllerPort
[   10.124330] creating proc entry for ControllerHost
[   10.281803] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: errors=panic
[   10.285178] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: errors=panic
[   10.301338] creating /proc/gpio/
[   10.301345]          /proc/gpio/ledbar_control
[   10.301347]          /proc/gpio/led_pattern
[   10.301349]          /proc/gpio/led_tempo
[   10.301351]          /proc/gpio/poe_passthrough
[   10.558537] watchdog: watchdog0: nowayout prevents watchdog being stopped!
[   10.558543] watchdog: watchdog0: watchdog did not stop!
[   10.577662] zram: Added device: zram0
[   10.596388] zram0: detected capacity change from 0 to 7241945088
[   10.607953] Adding 7072208k swap on /dev/zram0.  Priority:100 extents:1 across:7072208k SS
[   10.777691] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.base_reachable_time - use net.ipv6.neigh.default.base_reachable_time_ms instead
[   10.828544] al_eth 0000:00:00.0 eth9.tmp: renamed from eth0
[   10.853803] al_eth 0000:00:02.0 eth10.tmp: renamed from eth2
[   10.873824] al_eth 0000:00:03.0 switch0.tmp: renamed from eth3
[   10.889759] al_eth 0000:00:01.0 eth8.tmp: renamed from eth1
[   10.908395] al_eth 0000:00:02.0 eth10: renamed from eth10.tmp
[   10.929179] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[   10.934319] al_eth 0000:00:01.0 eth8: renamed from eth8.tmp
[   10.949977] al_mod_eth_lm_link_detection_step: New SFP mode detected AL_ETH_LM_MODE_DISCONNECTED -> AL_ETH_LM_MODE_10G_DA
[   10.956154] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[   10.961537] Configured MAC to RGMII mode
[   10.962419] al_eth 0000:00:01.0 eth8: using MSI-X per Queue interrupt mode
[   10.966186] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
[   10.970672] al_eth 0000:00:02.0: al_mod_eth_function_reset: performing FLR
[   10.976204] al_eth 0000:00:02.0 eth10: Configured iCRC TX HW offload in entry_idx 0 (protocol_idx:0xe)
[   10.976208] Configured MAC to KR mode
[   10.977081] al_eth 0000:00:02.0 eth10: using MSI-X per Queue interrupt mode
[   10.980976] al_eth 0000:00:00.0 eth9: renamed from eth9.tmp
[   11.971937] eth [al_mod_eth_1]: set link speed to 1000Mbps. full duplex.
[   11.971945] al_eth 0000:00:01.0 eth8: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.079680] al_mod_eth_group_lm_link_manage: eth2 - link established successfully
[   15.079749] IPv6: ADDRCONF(NETDEV_UP): eth9: link is not ready
[   15.079811] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[   15.079959] IPv6: ADDRCONF(NETDEV_CHANGE): eth10: link becomes ready
[   15.086163] al_eth 0000:00:03.0 switch0: renamed from switch0.tmp
[   15.104220] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[   15.109617] Configured MAC to SGMII_2_5G mode
[   15.110499] al_eth 0000:00:03.0 switch0: using MSI-X per Queue interrupt mode
[   15.114301] IPv6: ADDRCONF(NETDEV_UP): switch0: link is not ready
[   15.137524] br0: port 1(switch0) entered blocking state
[   15.137528] br0: port 1(switch0) entered disabled state
[   15.137624] device switch0 entered promiscuous mode
[   15.139988] br0: port 2(eth10) entered blocking state
[   15.139991] br0: port 2(eth10) entered disabled state
[   15.140072] device eth10 entered promiscuous mode
[   15.142724] br0: port 2(eth10) entered blocking state
[   15.142728] br0: port 2(eth10) entered forwarding state
[   15.325099] IPv6: ADDRCONF(NETDEV_UP): eth9: link is not ready
[   15.349868] br0: port 2(eth10) entered disabled state
[   15.353834] br0: port 2(eth10) entered blocking state
[   15.353838] br0: port 2(eth10) entered forwarding state
[   15.373937] al_mod_eth_lm_link_detection_step: New SFP mode detected AL_ETH_LM_MODE_DISCONNECTED -> AL_ETH_LM_MODE_10G_DA
[   15.374230] al_eth 0000:00:02.0: al_mod_eth_function_reset: performing FLR
[   15.379832] al_eth 0000:00:02.0 eth10: Configured iCRC TX HW offload in entry_idx 0 (protocol_idx:0xe)
[   15.379838] Configured MAC to KR mode
[   15.380707] al_eth 0000:00:02.0 eth10: using MSI-X per Queue interrupt mode
[   15.395431] br0: port 1(switch0) entered disabled state
[   15.398507] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[   15.403942] Configured MAC to SGMII_2_5G mode
[   15.404803] al_eth 0000:00:03.0 switch0: using MSI-X per Queue interrupt mode
[   15.408557] IPv6: ADDRCONF(NETDEV_UP): switch0: link is not ready
[   15.444694] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[   15.450081] Configured MAC to RGMII mode
[   15.451205] al_eth 0000:00:01.0 eth8: using MSI-X per Queue interrupt mode
[   15.456424] eth [al_mod_eth_1]: set link speed to 1000Mbps. full duplex.
[   15.456433] al_eth 0000:00:01.0 eth8: Link is Up - 1Gbps/Full - flow control rx/tx
[   16.098684] IPv6: ADDRCONF(NETDEV_CHANGE): switch0: link becomes ready
[   16.098731] br0: port 1(switch0) entered blocking state
[   16.098736] br0: port 1(switch0) entered forwarding state
[   16.098883] br0: port 2(eth10) entered disabled state
[   16.418677] al_eth 0000:00:03.0 switch0: Link is Up - 2.5Gbps/Full - flow control off
[   17.243658] al_mod_eth_group_lm_link_manage: eth2 - link established successfully
[   17.243689] br0: port 2(eth10) entered blocking state
[   17.243692] br0: port 2(eth10) entered forwarding state
[   20.800981] Bluetooth: hci0: unexpected event for opcode 0x0000
[   22.472523] PPP generic driver version 2.4.2
[   26.745338] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   34.087086] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:1, serdes_grp:3
[   34.087089] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:3, serdes_grp:3
[   34.165972] al_mod_eth_lm_link_detection_step: New SFP mode detected AL_ETH_LM_MODE_DISCONNECTED -> AL_ETH_LM_MODE_10G_DA
[   36.007687] al_mod_eth_group_lm_link_manage: eth2 - link established successfully
[   44.764790] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:1, serdes_grp:3
[   44.764793] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:3, serdes_grp:3
[   44.869880] al_mod_eth_lm_link_detection_step: New SFP mode detected AL_ETH_LM_MODE_DISCONNECTED -> AL_ETH_LM_MODE_10G_DA
[   45.155563] al_eth 0000:00:01.0 eth8: Link is Down
[   46.715657] al_mod_eth_group_lm_link_manage: eth2 - link established successfully
[   48.228117] eth [al_mod_eth_1]: set link speed to 1000Mbps. full duplex.
[   48.228126] al_eth 0000:00:01.0 eth8: Link is Up - 1Gbps/Full - flow control rx/tx
[   50.003204] br0: port 1(switch0) entered disabled state
[   50.147337] br0: port 1(switch0.1) entered blocking state
[   50.147342] br0: port 1(switch0.1) entered disabled state
[   50.147426] device switch0.1 entered promiscuous mode
[   50.147476] br0: port 1(switch0.1) entered blocking state
[   50.147479] br0: port 1(switch0.1) entered forwarding state
[   50.230400] br20: port 1(eth10.20) entered blocking state
[   50.230403] br20: port 1(eth10.20) entered disabled state
[   50.230487] device eth10.20 entered promiscuous mode
[   50.230539] br20: port 1(eth10.20) entered blocking state
[   50.230542] br20: port 1(eth10.20) entered forwarding state
[   50.232990] br20: port 2(switch0.20) entered blocking state
[   50.232993] br20: port 2(switch0.20) entered disabled state
[   50.233071] device switch0.20 entered promiscuous mode
[   50.233105] br20: port 2(switch0.20) entered blocking state
[   50.233107] br20: port 2(switch0.20) entered forwarding state
[   50.326890] ICMPv6: process `ubios-udapi-ser' is using deprecated sysctl (syscall) net.ipv6.neigh.br0.base_reachable_time - use net.ipv6.neigh.br0.base_reachable_time_ms instead
[   50.400728] Init chrdev /dev/detector with major 190
[   50.400737] tdts: tcp_conn_max = 32000
\x000a
[   50.400739] tdts: tcp_conn_timeout = 300 sec
\x000a
[   52.258742] al_eth 0000:00:03.0 switch0: ETH(3)-MAC XGMII Data FIFO 64_32 Error: 1
[   52.258748] al_eth 0000:00:03.0 switch0: ETH(3)-MAC XGMII Data FIFO 64_32 Full: 1
[   52.258751] err_events: ERR ETH(3)-MAC,XGMII Data FIFO 64_32 Full cause is still set after clearing it
[   53.071346] cgroup: podman (2290) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   53.071349] cgroup: "memory" requires setting use_hierarchy to 1 on the root
[   54.322510] systemd-journald[28]: Received request to flush runtime journal from PID 1
[  318.688122] wireguard: WireGuard 1.0.20210606 loaded. See www.wireguard.com for information.
[  318.688124] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[  459.140251] systemd-journald[28]: Received SIGTERM from PID 1 (systemd-shutdow).
[  459.143263] reboot: cmd=cdef0123
[  459.146554] reboot:   called by: [ 2331]/lib/systemd/systemd-shutdown halt --timeout 90000000us --log-level 6 --log-target console --log-color
[  459.159880] reboot:   called by: [ 2303]/usr/libexec/podman/conmon --api-version 1 -c 79e33265ee41124f1103793b69676cc4bc88ceae68cfb5b70296cc2617dddf63 -u 79e33265ee411
[  459.174935] reboot:   called by: [    1]init
[  459.179241] reboot:   called by: [    0]