hostapd output AR9285 master mode no WPA2

gistfile1.txt

random: Trying to read entropy from /dev/random
Configuration file: /home/protonet/dashboard/shared/config/hostapd.d/config
Line 9: DEPRECATED: 'debug' configuration variable is not used anymore
nl80211: interface wlan0 in phy phy0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based off-channel TX
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
nl80211: Set mode ifindex 3 iftype 3 (AP)
nl80211: Create interface iftype 6 (MONITOR)
nl80211: New interface mon.wlan0 created: ifindex=13
nl80211: Add own interface ifindex 13
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz
nl80211: 2457-2482 @ 20 MHz
nl80211: 2474-2494 @ 20 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
Scan for neighboring BSSes prior to enabling 40 MHz channel
Scan requested (ret=0) - scan timeout 10 seconds
Interface initialization will be completed in a callback
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
nl80211: Ignore interface down event since interface mon.wlan0 is up
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
nl80211: Ignore interface down event since interface mon.wlan0 is up
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
nl80211: Ignore interface down event since interface wlan0 is up
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
nl80211: Event message available
nl80211: Scan trigger
random: Got 9/20 bytes from /dev/random
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
nl80211: Event message available
nl80211: New scan results available
wlan0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (5 BSSes)
40 MHz affected channel range: [2397,2447] MHz
Neighboring BSS: 00:15:6d:ea:f4:4b freq=2412 pri=0 sec=0
Neighboring BSS: 00:22:b0:eb:2b:f6 freq=2437 pri=0 sec=0
Neighboring BSS: 00:15:6d:da:c3:ae freq=2437 pri=0 sec=0
HT40: control channel: 5  secondary channel: 1
Completing interface initialization
Mode: IEEE 802.11g  Channel: 5  Frequency: 2432 MHz
nl80211: Set freq 2432 (ht_enabled=1 sec_channel_offset=-1)
RATE[0] rate=10 flags=0x1
RATE[1] rate=20 flags=0x1
RATE[2] rate=55 flags=0x1
RATE[3] rate=110 flags=0x1
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
Flushing old station entries
Deauthenticate all stations
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
Using interface wlan0 with hwaddr 74:2f:68:4a:dc:6b and ssid 'HILFE ICH BIN IM KLO EINGESPEERT'
random: Cannot read from /dev/random: Resource temporarily unavailable
random: Got 0/11 bytes from /dev/random
random: Only 9/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
GMK - hexdump(len=32): [REMOVED]
Key Counter - hexdump(len=32): [REMOVED]
WPA: Delay group state machine start until Beacon frames have been configured
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon set failed: -22 (Invalid argument)
Failed to set beacon parameters
WPA: Start group state machine to set initial keys
WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
GTK - hexdump(len=16): [REMOVED]
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x453537 key_idx=1 set_tx=1 seq_len=0 key_len=16
   broadcast key
wpa_driver_nl80211_set_operstate: operstate 0->1 (UP)
netlink: Operstate: linkmode=-1, operstate=6
wlan0: Setup of interface done.
wlan0: Event TX_STATUS (18) received
mgmt::deauth cb
wlan0: Event RX_MGMT (20) received
wlan0: Event RX_MGMT (20) received
wlan0: Event RX_MGMT (20) received