People Counting Machine

makehub

# Title 
People Counting Machine
# Picture 
media: http://postimg.org/image/96rkqc1mn/f8844c63/
# Objective
Marketing Managers of public space need to now how many people entered or exited their place at a given time so that they can plan for future events. For example a super market needs to know the peak hours when they have a lot of people so that they can schedule very well working hours etc. Therefore our  objective is to count people or things that are entering in a given entrance so that the data can be used for statistic and analyzes
# Duration
4 hours
# Age Group
all
# Materials
## LDR
* description:Light dependent resistance- its a sensor which change the resitance when the light intensity around it changes
* quantity:1
* price:1.5$
* link:https://www.sparkfun.com/products/9088

## Arduino
* description:an open source microcontroller development board
* quantity:1
* price:25$
* link:https://www.sparkfun.com/products/11575

## ServoMotor
* description:A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration
* quantity:1
* price:9$
* link:https://www.sparkfun.com/products/9065

## BreadBoard and Wires
* description:undefined
* quantity:1
* price:undefined
* link:undefined

## Resistors
* description:1k resistor
* quantity:1
* price:undefined
* link:undefined

# Steps
## To branch the light sensor and the resistor to the board
media: http://postimg.org/image/ca0ckkv29/f264ede2/

notes: The light sensor will detect the intensity of light and give a signal if there is the change in intensity. The resistor will serve as the stabilizer of the circuit

## To branch the servomotor to the board
media: http://postimg.org/image/kva61a5sz/1bfbde36/

notes: The servomotor moves with precision according to the set angles. This servomotor will close or open the gate

## Connect the circuit to the arduino
media: undefined

notes: The arduino will coordinate and control the whole circuit .But before connecting the arduino and the rest of the circuit, you should have uploaded the program to arduino.

## Place the light sensor in front of the light source
media: undefined

notes: The sensor and the light source face each other , then when something passes between them, there will be the change in the intensity of light .at light sensor that will mark that something has passed.

## Lastly power the arduino and text the system
media: undefined

notes: This power source will supply the needed current to the circuit. You can you any DC power supply from 9v to 12V

# Notes
undefined

makehub.json

{"id":"9068417","user":"dushime","description":"People Counting Machine","urls":["http://postimg.org/image/96rkqc1mn/f8844c63/","http://postimg.org/image/ca0ckkv29/f264ede2/","http://postimg.org/image/kva61a5sz/1bfbde36/","undefined","undefined","undefined"],"raw":"# Title \nPeople Counting Machine\n# Picture \nmedia: http://postimg.org/image/96rkqc1mn/f8844c63/\n# Objective\nMarketing Managers of public space need to now how many people entered or exited their place at a given time so that they can plan for future events. For example a super market needs to know the peak hours when they have a lot of people so that they can schedule very well working hours etc. Therefore our  objective is to count people or things that are entering in a given entrance so that the data can be used for statistic and analyzes\n# Duration\n4 hours\n# Age Group\nall\n# Materials\n## LDR\n* description:Light dependent resistance- its a sensor which change the resitance when the light intensity around it changes\n* quantity:11111111110\n* price:€\n* link:\n\n# Steps\n## To branch the light sensor and the resistor to the board\nmedia: http://postimg.org/image/ca0ckkv29/f264ede2/\n\nnotes: The light sensor will detect the intensity of light and give a signal if there is the change in intensity. The resistor will serve as the stabilizer of the circuit\n\n## To branch the servomotor to the board\nmedia: http://postimg.org/image/kva61a5sz/1bfbde36/\n\nnotes: The servomotor moves with precision according to the set angles. This servomotor will close or open the gate\n\n## Connect the circuit to the arduino\nmedia: undefined\n\nnotes: The arduino will coordinate and control the whole circuit .But before connecting the arduino and the rest of the circuit, you should have uploaded the program to arduino.\n\n## Place the light sensor in front of the light source\nmedia: undefined\n\nnotes: The sensor and the light source face each other , then when something passes between them, there will be the change in the intensity of light .at light sensor that will mark that something has passed.\n\n## Lastly power the arduino and text the system\nmedia: undefined\n\nnotes: This power source will supply the needed current to the circuit. You can you any DC power supply from 9v to 12V\n\n# Notes\nundefined\n","steps":[{"description":"To branch the light sensor and the resistor to the board","media":"http://postimg.org/image/ca0ckkv29/f264ede2/","$$hashKey":"008","notes":"The light sensor will detect the intensity of light and give a signal if there is the change in intensity. The resistor will serve as the stabilizer of the circuit"},{"$$hashKey":"00A","description":"To branch the servomotor to the board","media":"http://postimg.org/image/kva61a5sz/1bfbde36/","notes":"The servomotor moves with precision according to the set angles. This servomotor will close or open the gate"},{"$$hashKey":"00C","description":"Connect the circuit to the arduino","notes":"The arduino will coordinate and control the whole circuit .But before connecting the arduino and the rest of the circuit, you should have uploaded the program to arduino."},{"$$hashKey":"00E","description":"Place the light sensor in front of the light source","notes":"The sensor and the light source face each other , then when something passes between them, there will be the change in the intensity of light .at light sensor that will mark that something has passed."},{"$$hashKey":"00G","description":"Lastly power the arduino and text the system","notes":"This power source will supply the needed current to the circuit. You can you any DC power supply from 9v to 12V"}],"materials":[{"item":"LDR","description":"Light dependent resistance- its a sensor which change the resitance when the light intensity around it changes","quantity":"1","price":"1.5$","link":"https://www.sparkfun.com/products/9088","$$hashKey":"006"},{"$$hashKey":"00Z","item":"Arduino","description":"an open source microcontroller development board","quantity":"1","link":"https://www.sparkfun.com/products/11575","price":"25$"},{"$$hashKey":"012","item":"ServoMotor","link":"https://www.sparkfun.com/products/9065","price":"9$","quantity":"1","description":"A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration"},{"$$hashKey":"015","item":"BreadBoard and Wires","quantity":"1"},{"$$hashKey":"018","item":"Resistors","description":"1k resistor","quantity":"1"}],"title":"People Counting Machine","picture":"http://postimg.org/image/96rkqc1mn/f8844c63/","objective":"Marketing Managers of public space need to now how many people entered or exited their place at a given time so that they can plan for future events. For example a super market needs to know the peak hours when they have a lot of people so that they can schedule very well working hours etc. Therefore our  objective is to count people or things that are entering in a given entrance so that the data can be used for statistic and analyzes","duration":"4 hours","ageGroup":"all","content":"<h1>Title</h1>\n\n<p>People Counting Machine</p>\n\n<h1>Picture</h1>\n\n<p><img src='https://postimg.org/image/96rkqc1mn/f8844c63/'></p>\n\n<h1>Objective</h1>\n\n<p>Marketing Managers of public space need to now how many people entered or exited their place at a given time so that they can plan for future events. For example a super market needs to know the peak hours when they have a lot of people so that they can schedule very well working hours etc. Therefore our  objective is to count people or things that are entering in a given entrance so that the data can be used for statistic and analyzes</p>\n\n<h1>Duration</h1>\n\n<p>4 hours</p>\n\n<h1>Age Group</h1>\n\n<p>all</p>\n\n<h1>Materials</h1>\n\n<h2>LDR</h2>\n\n<ul>\n<li>description:Light dependent resistance- its a sensor which change the resitance when the light intensity around it changes</li>\n<li>quantity:11111111110</li>\n<li>price:1.5$</li>\n<li>link:<a href=\"https://www.sparkfun.com/products/9088\">https://www.sparkfun.com/products/9088</a></li>\n</ul>\n\n<h2>Arduino</h2>\n\n<ul>\n<li>description:an open source microcontroller development board</li>\n<li>quantity:1</li>\n<li>price:25$</li>\n<li>link:<a href=\"https://www.sparkfun.com/products/11575\">https://www.sparkfun.com/products/11575</a></li>\n</ul>\n\n<h2>ServoMotor</h2>\n\n<ul>\n<li>description:A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration</li>\n<li>quantity:1</li>\n<li>price:9$</li>\n<li>link:<a href=\"https://www.sparkfun.com/products/9065\">https://www.sparkfun.com/products/9065</a></li>\n</ul>\n\n<h2>BreadBoard and Wires</h2>\n\n<ul>\n<li>description:undefined</li>\n<li>quantity:1</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h2>Resistors</h2>\n\n<ul>\n<li>description:1k resistor</li>\n<li>quantity:1</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h1>Steps</h1>\n\n<h2>To branch the light sensor and the resistor to the board</h2>\n\n<p><img src='https://postimg.org/image/ca0ckkv29/f264ede2/'></p>\n\n<p>notes: The light sensor will detect the intensity of light and give a signal if there is the change in intensity. The resistor will serve as the stabilizer of the circuit</p>\n\n<h2>To branch the servomotor to the board</h2>\n\n<p><img src='https://postimg.org/image/kva61a5sz/1bfbde36/'></p>\n\n<p>notes: The servomotor moves with precision according to the set angles. This servomotor will close or open the gate</p>\n\n<h2>Connect the circuit to the arduino</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: The arduino will coordinate and control the whole circuit .But before connecting the arduino and the rest of the circuit, you should have uploaded the program to arduino.</p>\n\n<h2>Place the light sensor in front of the light source</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: The sensor and the light source face each other , then when something passes between them, there will be the change in the intensity of light .at light sensor that will mark that something has passed.</p>\n\n<h2>Lastly power the arduino and text the system</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: This power source will supply the needed current to the circuit. You can you any DC power supply from 9v to 12V</p>\n\n<h1>Notes</h1>\n\n<p>undefined</p>","ownedByMe":"true"}