dwblair

// Using Plot.ly's Arduino API to visualize Temperature and Humidity Readings from A DHT22 Sensor

#include <SPI.h>
#include <Ethernet.h>
#include "plotly_ethernet.h"
#include "DHT.h"


// DHT Sensor Setup
#define DHTPIN 2 // We have connected the DHT to Digital Pin 2

dwblair

#include "Arduino.h"
#include <SPI.h>
#include <Ethernet.h>
#include "plotly_ethernet.h"

//#include <avr/dtostrf.h>

plotly::plotly(){
    width_ = 10;
    prec_ = 5;

dwblair

#ifndef plotly_ethernet_h
#define plotly_ethernet_h

#include "Arduino.h"

#include <SPI.h>
#include <Ethernet.h>

class plotly
{

dwblair

// Using Plot.ly's Arduino API to visualize Temperature and Humidity Readings from A DHT22 Sensor

#include <SPI.h>
#include <Ethernet.h>
#include "plotly_ethernet.h"
#include "DHT.h"


// DHT Sensor Setup
#define DHTPIN 2 // We have connected the DHT to Digital Pin 2

dwblair

// Using Plot.ly's Arduino API to visualize Temperature and Humidity Readings from A DHT22 Sensor

#include <SPI.h>
#include <Ethernet.h>
#include "plotly_ethernet.h"
#include "DHT.h"

#include <thermistor.h>
// Calibration coeffs for RSBR-302J-Z50 Teflon-Coated 3k Thermistor
#define A 3.3501

dwblair

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 8;

dwblair

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 8;

dwblair

 

#include <Wire.h>
#include <Adafruit_MLX90614.h>

Adafruit_MLX90614 mlx = Adafruit_MLX90614();

dwblair

// Using Plot.ly's Arduino API to visualize Temperature and Humidity Readings from A DHT22 Sensor

#define DELAY_OFFSET 11
#define BEEP_PIN 5
#define audioLOW 250
#define audioHIGH 2000

#define tempLOW 0
#define tempCHILLY 18
#define tempMED 30

dwblair

/*
 * Append Example
 *
 * This sketch shows how to use open for append.
 * The sketch will append 100 line each time it opens the file.
 * The sketch will open and close the file 100 times.
 */
#include <SdFat.h>
int sensorPin = 0; //the analog pin the TMP36's Vout (sense) pin is connected to
                        //the resolution is 10 mV / degree centigrade with a