Original gpio.c module

gpio.c

/*
 * gpio.c:
 *      Swiss-Army-Knife, Set-UID command-line interface to the Raspberry
 *      Pi's GPIO.
 *      Copyright (c) 2012 Gordon Henderson
 ***********************************************************************
 * This file is part of wiringPi:
 *      https://projects.drogon.net/raspberry-pi/wiringpi/
 *
 *    wiringPi is free software: you can redistribute it and/or modify
 *    it under the terms of the GNU Lesser General Public License as published by
 *    the Free Software Foundation, either version 3 of the License, or
 *    (at your option) any later version.
 *
 *    wiringPi is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU Lesser General Public License for more details.
 *
 *    You should have received a copy of the GNU Lesser General Public License
 *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
 ***********************************************************************
 */


#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <sys/types.h>
#include <fcntl.h>

#include <wiringPi.h>
#include <gertboard.h>

#ifndef TRUE
#  define       TRUE    (1==1)
#  define       FALSE   (1==2)
#endif

#define VERSION "1.2"

static int wpMode ;

char *usage = "Usage: gpio -v\n"
              "       gpio -h\n"
              "       gpio [-g] <read/write/pwm/mode> ...\n"
              "       gpio [-p] <read/write/mode> ...\n"
              "       gpio export/edge/unexport/unexportall/exports ...\n"
              "       gpio drive <group> <value>\n"
              "       gpio pwm-bal/pwm-ms \n"
              "       gpio pwmr <range> \n"
              "       gpio load spi/i2c\n" ;
/*
char *usage = "Usage: gpio -v\n"
              "       gpio -h\n"
              "       gpio [-g] <read/write/pwm/mode> ...\n"
              "       gpio [-p] <read/write/mode> ...\n"
              "       gpio export/edge/unexport/unexportall/exports ...\n"
              "       gpio drive <group> <value>\n"
              "       gpio pwm-bal/pwm-ms \n"
              "       gpio pwmr <range> \n"
              "       gpio load spi/i2c\n"
              "       gpio gbr <channel>\n"
              "       gpio gbw <channel> <value>\n" ;
*/

/*
 * changeOwner:
 *      Change the ownership of the file to the real userId of the calling
 *      program so we can access it.
 *********************************************************************************
 */

static void changeOwner (char *cmd, char *file)
{
  uid_t uid = getuid () ;
  uid_t gid = getgid () ;

  if (chown (file, uid, gid) != 0)
  {
    if (errno == ENOENT)        // Warn that it's not there
      fprintf (stderr, "%s: Warning: File not present: %s\n", cmd, file) ;
    else
    {
      fprintf (stderr, "%s: Unable to change ownership of %s: %s\n", cmd, file, strerror (errno)) ;
      exit (1) ;
    }
  }
}


/*
 * moduleLoaded:
 *      Return true/false if the supplied module is loaded
 *********************************************************************************
 */

static int moduleLoaded (char *modName)
{
  int len   = strlen (modName) ;
  int found = FALSE ;
  FILE *fd = fopen ("/proc/modules", "r") ;
  char line [80] ;

  if (fd == NULL)
  {
    fprintf (stderr, "gpio: Unable to check modules: %s\n", strerror (errno)) ;
    exit (1) ;
  }

  while (fgets (line, 80, fd) != NULL)
  {
    if (strncmp (line, modName, len) != 0)
      continue ;

    found = TRUE ;
    break ;
  }

  fclose (fd) ;

  return found ;
}


/*
 * doLoad:
 *      Load either the spi or i2c modules and change device ownerships, etc.
 *********************************************************************************
 */

static void _doLoadUsage (char *argv [])
{
  fprintf (stderr, "Usage: %s load <spi/i2c>\n", argv [0]) ;
  exit (1) ;
}

static void doLoad (int argc, char *argv [])
{
  char *module ;
  char cmd [80] ;
  char *file1, *file2 ;

  if (argc != 3)
    _doLoadUsage (argv) ;

  /**/ if (strcasecmp (argv [2], "spi") == 0)
  {
    module = "spi_bcm2708" ;
    file1  = "/dev/spidev0.0" ;
    file2  = "/dev/spidev0.1" ;
  }
  else if (strcasecmp (argv [2], "i2c") == 0)
  {
    module = "i2c_bcm2708" ;
    file1  = "/dev/i2c-0" ;
    file2  = "/dev/i2c-1" ;
  }
  else
    _doLoadUsage (argv) ;

  if (!moduleLoaded (module))
  {
    sprintf (cmd, "modprobe %s", module) ;
    system (cmd) ;
  }

  if (!moduleLoaded (module))
  {
    fprintf (stderr, "%s: Unable to load %s\n", argv [0], module) ;
    exit (1) ;
  }

  sleep (1) ;   // To let things get settled

  changeOwner (argv [0], file1) ;
  changeOwner (argv [0], file2) ;
}



/*
 * doExports:
 *      List all GPIO exports
 *********************************************************************************
 */

static void doExports (int argc, char *argv [])
{
  int fd ;
  int i, l, first ;
  char fName [128] ;
  char buf [16] ;

// Rather crude, but who knows what others are up to...

  for (first = 0, i = 0 ; i < 64 ; ++i)
  {

// Try to read the direction

    sprintf (fName, "/sys/class/gpio/gpio%d/direction", i) ;
    if ((fd = open (fName, O_RDONLY)) == -1)
      continue ;

    if (first == 0)
    {
      ++first ;
      printf ("GPIO Pins exported:\n") ;
    }

    printf ("%4d: ", i) ;

    if ((l = read (fd, buf, 16)) == 0)
      sprintf (buf, "%s", "?") ;
 
    buf [l] = 0 ;
    if ((buf [strlen (buf) - 1]) == '\n')
      buf [strlen (buf) - 1] = 0 ;

    printf ("%-3s", buf) ;

    close (fd) ;

// Try to Read the value

    sprintf (fName, "/sys/class/gpio/gpio%d/value", i) ;
    if ((fd = open (fName, O_RDONLY)) == -1)
    {
      printf ("No Value file (huh?)\n") ;
      continue ;
    }

    if ((l = read (fd, buf, 16)) == 0)
      sprintf (buf, "%s", "?") ;

    buf [l] = 0 ;
    if ((buf [strlen (buf) - 1]) == '\n')
      buf [strlen (buf) - 1] = 0 ;

    printf ("  %s", buf) ;

// Read any edge trigger file

    sprintf (fName, "/sys/class/gpio/gpio%d/edge", i) ;
    if ((fd = open (fName, O_RDONLY)) == -1)
    {
      printf ("\n") ;
      continue ;
    }

    if ((l = read (fd, buf, 16)) == 0)
      sprintf (buf, "%s", "?") ;

    buf [l] = 0 ;
    if ((buf [strlen (buf) - 1]) == '\n')
      buf [strlen (buf) - 1] = 0 ;

    printf ("  %-8s\n", buf) ;

    close (fd) ;
  }
}


/*
 * doExport:
 *      gpio export pin mode
 *      This uses the /sys/class/gpio device interface.
 *********************************************************************************
 */

void doExport (int argc, char *argv [])
{
  FILE *fd ;
  int pin ;
  char *mode ;
  char fName [128] ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s export pin mode\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  mode = argv [3] ;

  if ((fd = fopen ("/sys/class/gpio/export", "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO export interface: %s\n", argv [0], strerror (errno)) ;
    exit (1) ;
  }

  fprintf (fd, "%d\n", pin) ;
  fclose (fd) ;

  sprintf (fName, "/sys/class/gpio/gpio%d/direction", pin) ;
  if ((fd = fopen (fName, "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO direction interface for pin %d: %s\n", argv [0], pin, strerror (errno)) ;
    exit (1) ;
  }

  /**/ if ((strcasecmp (mode, "in")  == 0) || (strcasecmp (mode, "input")  == 0))
    fprintf (fd, "in\n") ;
  else if ((strcasecmp (mode, "out") == 0) || (strcasecmp (mode, "output") == 0))
    fprintf (fd, "out\n") ;
  else
  {
    fprintf (stderr, "%s: Invalid mode: %s. Should be in or out\n", argv [1], mode) ;
    exit (1) ;
  }

  fclose (fd) ;

// Change ownership so the current user can actually use it!

  sprintf (fName, "/sys/class/gpio/gpio%d/value", pin) ;
  changeOwner (argv [0], fName) ;

  sprintf (fName, "/sys/class/gpio/gpio%d/edge", pin) ;
  changeOwner (argv [0], fName) ;

}


/*
 * doEdge:
 *      gpio edge pin mode
 *      Easy access to changing the edge trigger on a GPIO pin
 *      This uses the /sys/class/gpio device interface.
 *********************************************************************************
 */

void doEdge (int argc, char *argv [])
{
  FILE *fd ;
  int pin ;
  char *mode ;
  char fName [128] ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s edge pin mode\n", argv [0]) ;
    exit (1) ;
  }

  pin  = atoi (argv [2]) ;
  mode = argv [3] ;

// Export the pin and set direction to input

  if ((fd = fopen ("/sys/class/gpio/export", "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO export interface: %s\n", argv [0], strerror (errno)) ;
    exit (1) ;
  }

  fprintf (fd, "%d\n", pin) ;
  fclose (fd) ;

  sprintf (fName, "/sys/class/gpio/gpio%d/direction", pin) ;
  if ((fd = fopen (fName, "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO direction interface for pin %d: %s\n", argv [0], pin, strerror (errno)) ;
    exit (1) ;
  }

  fprintf (fd, "in\n") ;
  fclose (fd) ;

  sprintf (fName, "/sys/class/gpio/gpio%d/edge", pin) ;
  if ((fd = fopen (fName, "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO edge interface for pin %d: %s\n", argv [0], pin, strerror (errno)) ;
    exit (1) ;
  }

  /**/ if (strcasecmp (mode, "none")    == 0) fprintf (fd, "none\n") ;
  else if (strcasecmp (mode, "rising")  == 0) fprintf (fd, "rising\n") ;
  else if (strcasecmp (mode, "falling") == 0) fprintf (fd, "falling\n") ;
  else if (strcasecmp (mode, "both")    == 0) fprintf (fd, "both\n") ;
  else
  {
    fprintf (stderr, "%s: Invalid mode: %s. Should be none, rising, falling or both\n", argv [1], mode) ;
    exit (1) ;
  }

// Change ownership of the value and edge files, so the current user can actually use it!

  sprintf (fName, "/sys/class/gpio/gpio%d/value", pin) ;
  changeOwner (argv [0], fName) ;

  sprintf (fName, "/sys/class/gpio/gpio%d/edge", pin) ;
  changeOwner (argv [0], fName) ;

  fclose (fd) ;
}


/*
 * doUnexport:
 *      gpio unexport pin
 *      This uses the /sys/class/gpio device interface.
 *********************************************************************************
 */

void doUnexport (int argc, char *argv [])
{
  FILE *fd ;
  int pin ;

  if (argc != 3)
  {
    fprintf (stderr, "Usage: %s unexport pin\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  if ((fd = fopen ("/sys/class/gpio/unexport", "w")) == NULL)
  {
    fprintf (stderr, "%s: Unable to open GPIO export interface\n", argv [0]) ;
    exit (1) ;
  }

  fprintf (fd, "%d\n", pin) ;
  fclose (fd) ;
}


/*
 * doUnexportAll:
 *      gpio unexportall
 *      Un-Export all the GPIO pins.
 *      This uses the /sys/class/gpio device interface.
 *********************************************************************************
 */

void doUnexportall (int argc, char *argv [])
{
  FILE *fd ;
  int pin ;

  for (pin = 0 ; pin < 63 ; ++pin)
  {
    if ((fd = fopen ("/sys/class/gpio/unexport", "w")) == NULL)
    {
      fprintf (stderr, "%s: Unable to open GPIO export interface\n", argv [0]) ;
      exit (1) ;
    }
    fprintf (fd, "%d\n", pin) ;
    fclose (fd) ;
  }
}


/*
 * doMode:
 *      gpio mode pin mode ...
 *********************************************************************************
 */

void doMode (int argc, char *argv [])
{
  int pin ;
  char *mode ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s mode pin mode\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  if ((wpMode == WPI_MODE_PINS) && ((pin < 0) || (pin >= NUM_PINS)))
    return ;

  mode = argv [3] ;

  /**/ if (strcasecmp (mode, "in")   == 0) pinMode         (pin, INPUT) ;
  else if (strcasecmp (mode, "out")  == 0) pinMode         (pin, OUTPUT) ;
  else if (strcasecmp (mode, "pwm")  == 0) pinMode         (pin, PWM_OUTPUT) ;
  else if (strcasecmp (mode, "up")   == 0) pullUpDnControl (pin, PUD_UP) ;
  else if (strcasecmp (mode, "down") == 0) pullUpDnControl (pin, PUD_DOWN) ;
  else if (strcasecmp (mode, "tri")  == 0) pullUpDnControl (pin, PUD_OFF) ;
  else
  {
    fprintf (stderr, "%s: Invalid mode: %s. Should be in/out/pwm/up/down/tri\n", argv [1], mode) ;
    exit (1) ;
  }
}


/*
 * doPadDrive:
 *      gpio drive group value
 *********************************************************************************
 */

static void doPadDrive (int argc, char *argv [])
{
  int group, val ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s drive group value\n", argv [0]) ;
    exit (1) ;
  }

  group = atoi (argv [2]) ;
  val   = atoi (argv [3]) ;

  if ((group < 0) || (group > 2))
  {
    fprintf (stderr, "%s: drive group not 0, 1 or 2: %d\n", argv [0], group) ;
    exit (1) ;
  }

  if ((val < 0) || (val > 7))
  {
    fprintf (stderr, "%s: drive value not 0-7: %d\n", argv [0], val) ;
    exit (1) ;
  }

  setPadDrive (group, val) ;
}


/*
 * doGbw:
 *      gpio gbw channel value
 *********************************************************************************
 */
/*
static void doGbw (int argc, char *argv [])
{
  int channel, value ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s gbr <channel> <value>\n", argv [0]) ;
    exit (1) ;
  }

  channel = atoi (argv [2]) ;
  value   = atoi (argv [3]) ;

  if ((channel < 0) || (channel > 1))
  {
    fprintf (stderr, "%s: channel must be 0 or 1\n", argv [0]) ;
    exit (1) ;
  }

  if ((value < 0) || (value > 1023))
  {
    fprintf (stderr, "%s: value must be from 0 to 255\n", argv [0]) ;
    exit (1) ;
  }

  if (gertboardSPISetup () == -1)
  {
    fprintf (stderr, "Unable to initialise the Gertboard SPI interface: %s\n", strerror (errno)) ;
    exit (1) ;
  }

  gertboardAnalogWrite (channel, value) ;
}
*/

/*
 * doGbr:
 *      gpio gbr channel
 *********************************************************************************
 */

/*
static void doGbr (int argc, char *argv [])
{
  int channel ;

  if (argc != 3)
  {
    fprintf (stderr, "Usage: %s gbr <channel>\n", argv [0]) ;
    exit (1) ;
  }

  channel = atoi (argv [2]) ;

  if ((channel < 0) || (channel > 1))
  {
    fprintf (stderr, "%s: channel must be 0 or 1\n", argv [0]) ;
    exit (1) ;
  }

  if (gertboardSPISetup () == -1)
  {
    fprintf (stderr, "Unable to initialise the Gertboard SPI interface: %s\n", strerror (errno)) ;
    exit (1) ;
  }

  printf ("%d\n",gertboardAnalogRead (channel)) ;
}
*/


/*
 * doWrite:
 *      gpio write pin value
 *********************************************************************************
 */

static void doWrite (int argc, char *argv [])
{
  int pin, val ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s write pin value\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  if ((wpMode == WPI_MODE_PINS) && ((pin < 0) || (pin >= NUM_PINS)))
    return ;

  val = atoi (argv [3]) ;

  /**/ if (val == 0)
    digitalWrite (pin, LOW) ;
  else
    digitalWrite (pin, HIGH) ;
}


/*
 * doRead:
 *      Read a pin and return the value
 *********************************************************************************
 */

void doRead (int argc, char *argv []) 
{
  int pin, val ;

  if (argc != 3)
  {
    fprintf (stderr, "Usage: %s read pin\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  if ((wpMode == WPI_MODE_PINS) && ((pin < 0) || (pin >= NUM_PINS)))
  {
    printf ("0\n") ;
    return ;
  }

  val = digitalRead (pin) ;

  printf ("%s\n", val == 0 ? "0" : "1") ;
}


/*
 * doPwm:
 *      Output a PWM value on a pin
 *********************************************************************************
 */

void doPwm (int argc, char *argv [])
{
  int pin, val ;

  if (argc != 4)
  {
    fprintf (stderr, "Usage: %s pwm <pin> <value>\n", argv [0]) ;
    exit (1) ;
  }

  pin = atoi (argv [2]) ;

  if ((wpMode == WPI_MODE_PINS) && ((pin < 0) || (pin >= NUM_PINS)))
    return ;

  val = atoi (argv [3]) ;

  pwmWrite (pin, val) ;
}


/*
 * doPwmMode: doPwmRange:
 *      Change the PWM mode and Range values
 *********************************************************************************
 */

static void doPwmMode (int mode)
{
  pwmSetMode (mode) ;
}

static void doPwmRange (int argc, char *argv [])
{
  unsigned int range ;

  if (argc != 3)
  {
    fprintf (stderr, "Usage: %s pwmr <range>\n", argv [0]) ;
    exit (1) ;
  }

  range = (unsigned int)strtoul (argv [2], NULL, 10) ;

  if (range == 0)
  {
    fprintf (stderr, "%s: range must be > 0\n", argv [0]) ;
    exit (1) ;
  }

  pwmSetRange (range) ;
}


/*
 * main:
 *      Start here
 *********************************************************************************
 */

int main (int argc, char *argv [])
{
  int i ;

  if (argc == 1)
  {
    fprintf (stderr, "%s: %s\n", argv [0], usage) ;
    return 1 ;
  }

  if (strcasecmp (argv [1], "-h") == 0)
  {
    printf ("%s: %s\n", argv [0], usage) ;
    return 0 ;
  }

  if (strcasecmp (argv [1], "-v") == 0)
  {
    printf ("gpio version: %s\n", VERSION) ;
    printf ("Copyright (c) 2012 Gordon Henderson\n") ;
    printf ("This is free software with ABSOLUTELY NO WARRANTY.\n") ;
    printf ("For details type: %s -warranty\n", argv [0]) ;
    return 0 ;
  }

  if (strcasecmp (argv [1], "-warranty") == 0)
  {
    printf ("gpio version: %s\n", VERSION) ;
    printf ("Copyright (c) 2012 Gordon Henderson\n") ;
    printf ("\n") ;
    printf ("    This program is free software; you can redistribute it and/or modify\n") ;
    printf ("    it under the terms of the GNU Leser General Public License as published\n") ;
    printf ("    by the Free Software Foundation, either version 3 of the License, or\n") ;
    printf ("    (at your option) any later version.\n") ;
    printf ("\n") ;
    printf ("    This program is distributed in the hope that it will be useful,\n") ;
    printf ("    but WITHOUT ANY WARRANTY; without even the implied warranty of\n") ;
    printf ("    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n") ;
    printf ("    GNU Lesser General Public License for more details.\n") ;
    printf ("\n") ;
    printf ("    You should have received a copy of the GNU Lesser General Public License\n") ;
    printf ("    along with this program. If not, see <http://www.gnu.org/licenses/>.\n") ;
    printf ("\n") ;
    return 0 ;
  }

  if (geteuid () != 0)
  {
    fprintf (stderr, "%s: Must be root to run. Program should be suid root. This is an error.\n", argv [0]) ;
    return 1 ;
  }

// Initial test for /sys/class/gpio operations:

  /**/ if (strcasecmp (argv [1], "exports"    ) == 0)   { doExports     (argc, argv) ;  return 0 ; }
  else if (strcasecmp (argv [1], "export"     ) == 0)   { doExport      (argc, argv) ;  return 0 ; }
  else if (strcasecmp (argv [1], "edge"       ) == 0)   { doEdge        (argc, argv) ;  return 0 ; }
  else if (strcasecmp (argv [1], "unexportall") == 0)   { doUnexportall (argc, argv) ;  return 0 ; }
  else if (strcasecmp (argv [1], "unexport"   ) == 0)   { doUnexport    (argc, argv) ;  return 0 ; }

// Check for drive or load commands:

  if (strcasecmp (argv [1], "drive") == 0)      { doPadDrive (argc, argv) ; return 0 ; }
  if (strcasecmp (argv [1], "load" ) == 0)      { doLoad     (argc, argv) ; return 0 ; }

// Gertboard commands
/*
  if (strcasecmp (argv [1], "gbr" ) == 0)       { doGbr (argc, argv) ; return 0 ; }
  if (strcasecmp (argv [1], "gbw" ) == 0)       { doGbw (argc, argv) ; return 0 ; }
*/
// Check for -g argument

  if (strcasecmp (argv [1], "-g") == 0)
  {
    if (wiringPiSetupGpio () == -1)
    {
      fprintf (stderr, "%s: Unable to initialise GPIO mode.\n", argv [0]) ;
      exit (1) ;
    }

    for (i = 2 ; i < argc ; ++i)
      argv [i - 1] = argv [i] ;
    --argc ;
    wpMode = WPI_MODE_GPIO ;
  }

// Check for -p argument for PiFace

  else if (strcasecmp (argv [1], "-p") == 0)
  {
    if (wiringPiSetupPiFaceForGpioProg () == -1)
    {
      fprintf (stderr, "%s: Unable to initialise PiFace.\n", argv [0]) ;
      exit (1) ;
    }

    for (i = 2 ; i < argc ; ++i)
      argv [i - 1] = argv [i] ;
    --argc ;
    wpMode = WPI_MODE_PIFACE ;
  }

// Default to wiringPi mode

  else
  {
    if (wiringPiSetup () == -1)
    {
      fprintf (stderr, "%s: Unable to initialise wiringPi mode\n", argv [0]) ;
      exit (1) ;
    }
    wpMode = WPI_MODE_PINS ;
  }

// Check for PWM operations

  if (wpMode != WPI_MODE_PIFACE)
  {
    if (strcasecmp (argv [1], "pwm-bal") == 0)  { doPwmMode  (PWM_MODE_BAL) ; return 0 ; }
    if (strcasecmp (argv [1], "pwm-ms")  == 0)  { doPwmMode  (PWM_MODE_MS) ;  return 0 ; }
    if (strcasecmp (argv [1], "pwmr")    == 0)  { doPwmRange (argc, argv) ;   return 0 ; }
  }

// Check for wiring commands

  /**/ if (strcasecmp (argv [1], "read" ) == 0) doRead     (argc, argv) ;
  else if (strcasecmp (argv [1], "write") == 0) doWrite    (argc, argv) ;
  else if (strcasecmp (argv [1], "pwm"  ) == 0) doPwm      (argc, argv) ;
  else if (strcasecmp (argv [1], "mode" ) == 0) doMode     (argc, argv) ;
  else
  {
    fprintf (stderr, "%s: Unknown command: %s.\n", argv [0], argv [1]) ;
    exit (1) ;
  }
  return 0 ;
}

Changed version to make it compile.... removed references to gertboard and doGb

Updated the usage output to not show the gertboard command since they are not in the program now.