Skip to content

Instantly share code, notes, and snippets.

@dwilkins

dwilkins/Pantechisthere.txt

Last active January 1, 2016 23:18
Show Gist options
  • Save dwilkins/8215269 to your computer and use it in GitHub Desktop.
Save dwilkins/8215269 to your computer and use it in GitHub Desktop.
Download ZIP
Device is there
Raw
Pantechisthere.txt
# ifconfig
ath0 Link encap:Ethernet HWaddr 90:03:B7:C8:68:9C
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7404 errors:0 dropped:0 overruns:0 frame:0
TX packets:46308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2084809 (1.9 MiB) TX bytes:4060579 (3.8 MiB)
eth0 Link encap:Ethernet HWaddr D0:57:85:7B:7F:DE
inet addr:192.168.32.50 Bcast:192.168.32.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:154 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:39492 (38.5 KiB) TX bytes:2386 (2.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6588 errors:0 dropped:0 overruns:0 frame:0
TX packets:6588 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:606411 (592.1 KiB) TX bytes:606411 (592.1 KiB)
#
# Jan 1 00:26:58 uclibc user.debug kernel: /home/stephane/.ardrone/linux/ardrone2_ARDrone2_Version_20130102/Linux/kernel/omap/drivers/usb/core/inode.c: creating file '004'
Jan 1 00:26:58 uclibc user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Jan 1 00:26:58 uclibc user.debug kernel: hub 1-0:1.0: port 1 enable change, status 00000503
Jan 1 00:27:03 uclibc user.notice kernel: scsi 1:0:0:0: CD-ROM PANTECH CD-ROM 0000 PQ: 0 ANSI: 2
Jan 1 00:27:03 uclibc user.debug kernel: usb-storage: device scan complete
Jan 1 00:27:09 uclibc user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Jan 1 00:27:09 uclibc user.debug kernel: hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
Jan 1 00:27:09 uclibc user.info kernel: usb 1-1: USB disconnect, address 4
Jan 1 00:27:09 uclibc user.debug kernel: usb 1-1: unregistering device
Jan 1 00:27:09 uclibc user.debug kernel: usb 1-1: usb_disable_device nuking all URBs
Jan 1 00:27:09 uclibc user.debug kernel: usb 1-1: unregistering interface 1-1:1.0
Jan 1 00:27:09 uclibc user.debug kernel: usb 1-1:1.0: uevent
Jan 1 00:27:09 uclibc user.debug kernel: usb 1-1: uevent
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: new high speed USB device using musb_hdrc and address 5
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 3 descriptors after interface
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 1 descriptor after interface
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 1 descriptor after interface
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 1 descriptor after endpoint
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 4 descriptors after interface
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 1 descriptor after endpoint
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: skipped 4 descriptors after interface
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: default language 0x0409
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: udev 5, busnum 1, minor = 4
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: New USB device found, idVendor=10a9, idProduct=6064
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: Product: PANTECH UML295
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: Manufacturer: Pantech, Incorporated
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: SerialNumber: UML295693317228
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: usb_probe_device
Jan 1 00:27:10 uclibc user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.0: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.0: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.0: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: cdc_ether 1-1:1.0: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: cdc_ether 1-1:1.0: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.info kernel: eth0: register 'cdc_ether' at usb-musb_hdrc-1, CDC Ethernet Device, d0:57:85:7b:7f:de
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.1 (config #1, interface 1)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.1: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.2 (config #1, interface 2)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.2: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.2: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.2: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: usbhid 1-1:1.2: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbhid 1-1:1.2: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.info kernel: generic-usb 0003:10A9:6064.0003: hidraw0: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-musb_hdrc-1/input2
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.3 (config #1, interface 3)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.3: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.3: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.3: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: usbhid 1-1:1.3: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbhid 1-1:1.3: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.info kernel: generic-usb 0003:10A9:6064.0004: hidraw1: USB HID v2.00 Device [Pantech, Incorporated PANTECH UML295] on usb-musb_hdrc-1/input3
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.4 (config #1, interface 4)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.4: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.4: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.4: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.5 (config #1, interface 5)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.5: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.5: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.5: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.6 (config #1, interface 6)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.6: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.6: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.6: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1: adding 1-1:1.7 (config #1, interface 7)
Jan 1 00:27:10 uclibc user.debug kernel: usb 1-1:1.7: uevent
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.7: usb_probe_interface
Jan 1 00:27:10 uclibc user.debug kernel: usbserial_generic 1-1:1.7: usb_probe_interface - got id
Jan 1 00:27:10 uclibc user.debug kernel: /home/stephane/.ardrone/linux/ardrone2_ARDrone2_Version_20130102/Linux/kernel/omap/drivers/usb/core/inode.c: creating file '005'
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Jan 1 00:27:10 uclibc user.debug kernel: hub 1-0:1.0: port 1 enable change, status 00000503
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment