Neopixel Saat Uygulaması

Neopixel-Saat-Uygulamasi.ino

#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
#include <WiFiUdp.h>
#include <FastLED.h>
#define FASTLED_ESP8266_NODEMCU_PIN_ORDER
#define DEBUG_ON

const char ssid[] = "*";                          // İnternet ismi
const char pass[] = "*";                          // internet şifresi
unsigned long timeZone = 1.0;                     // Bu değeri yerel saat diliminize göre değiştirebilirsiniz
const char* NTPServerName = "1.tr.pool.ntp.org";    // Size uygun NTPServer'ı seçebilirsiniz. https://www.pool.ntp.org/en/
unsigned long intervalNTP = 24 * 60 * 60000;      // 24 Saatte bir tekrar
// CRGB colorHour = CRGB(255, 0, 0);
CRGB colorHour = CRGB::Red;
CRGB colorMinute = CRGB::Green;
CRGB colorSecond = CRGB::Blue;
CRGB colorHourMinute = CRGB::Yellow;
CRGB colorHourSecond = CRGB::Magenta;
CRGB colorMinuteSecond = CRGB::Cyan;
CRGB colorAll = CRGB::White;

// Saat LED'inin saatler arasında hareket etmesini istiyorsanız bunu doğru olarak ayarlayın (yanlış olarak ayarlanırsa saat LED'i yalnızca her saat hareket eder)
#define USE_LED_MOVE_BETWEEN_HOURS true

// Gündüz/gece cuttoff
#define USE_NIGHTCUTOFF false   // Enable/Disable night brightness
#define MORNINGCUTOFF 8         // Gün Doğumu saati   8am
#define NIGHTCUTOFF 20          // Gün batımı saati 10pm
#define NIGHTBRIGHTNESS 20      // Brightness level from 0 (off) to 255 (full brightness)

ESP8266WiFiMulti wifiMulti;                     
WiFiUDP UDP;                                    
IPAddress timeServerIP;                         
const int NTP_PACKET_SIZE = 48;                 
byte NTPBuffer[NTP_PACKET_SIZE];                

unsigned long prevNTP = 0;
unsigned long lastNTPResponse = millis();
uint32_t timeUNIX = 0;
unsigned long prevActualTime = 0;

#define LEAP_YEAR(Y) ( ((1970+Y)>0) && !((1970+Y)%4) && ( ((1970+Y)%100) || !((1970+Y)%400) ) )
static const uint8_t monthDays[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};

#define NUM_LEDS 60   // led sayımız   
#define DATA_PIN 6  // sinyal pinimiz
CRGB LEDs[NUM_LEDS];

struct DateTime {
  int  year;
  byte month;
  byte day;
  byte hour;
  byte minute;
  byte second;
  byte dayofweek;
};

DateTime currentDateTime;

void setup() {

  FastLED.delay(3000);
  FastLED.addLeds<WS2812B, DATA_PIN, GRB>(LEDs, NUM_LEDS);  

  Serial.begin(115200);          
  delay(10);
  Serial.println("\r\n");

  startWiFi();
  startUDP();

  if(!WiFi.hostByName(NTPServerName, timeServerIP)) { 
    Serial.println("DNS lookup failed. Rebooting.");
    Serial.flush();
    ESP.reset();
  }
  Serial.print("Time server IP:\t");
  Serial.println(timeServerIP);
  
  Serial.println("\r\nSending NTP request ...");
  sendNTPpacket(timeServerIP);  
}

void loop() {
  unsigned long currentMillis = millis();

  if (currentMillis - prevNTP > intervalNTP) { // If a minute has passed since last NTP request
    prevNTP = currentMillis;
    Serial.println("\r\nSending NTP request ...");
    sendNTPpacket(timeServerIP);               // Send an NTP request
  }

  uint32_t time = getTime();                   // Check if an NTP response has arrived and get the (UNIX) time
  if (time) {                                  // If a new timestamp has been received
    timeUNIX = time;
    Serial.print("NTP response:\t");
    Serial.println(timeUNIX);
    lastNTPResponse = currentMillis;
  } else if ((currentMillis - lastNTPResponse) > 3600000) {
    Serial.println("More than 1 hour since last NTP response. Rebooting.");
    Serial.flush();
    ESP.reset();
  }

  uint32_t actualTime = timeUNIX + (currentMillis - lastNTPResponse)/1000;
  if (actualTime != prevActualTime && timeUNIX != 0) { // If a second has passed since last update
    prevActualTime = actualTime;
    convertTime(actualTime);

    for (int i=0; i<NUM_LEDS; i++) 
      LEDs[i] = CRGB::Black;

    int second = getLEDMinuteOrSecond(currentDateTime.second);
    int minute = getLEDMinuteOrSecond(currentDateTime.minute);
    int hour = getLEDHour(currentDateTime.hour, currentDateTime.minute);

    // Set "Hands"
    LEDs[second] = colorSecond;
    LEDs[minute] = colorMinute;  
    LEDs[hour] = colorHour;  

    // Hour and min are on same spot
    if ( hour == minute)
      LEDs[hour] = colorHourMinute;

    // Hour and sec are on same spot
    if ( hour == second)
      LEDs[hour] = colorHourSecond;

    // Min and sec are on same spot
    if ( minute == second)
      LEDs[minute] = colorMinuteSecond;

    // All are on same spot
    if ( minute == second && minute == hour)
      LEDs[minute] = colorAll;

    if ( night() && USE_NIGHTCUTOFF == true )
      FastLED.setBrightness (NIGHTBRIGHTNESS); 

    FastLED.show();
  }  
}

byte getLEDHour(byte hours, byte minutes) {
  if (hours > 12)
    hours = hours - 12;

  byte hourLED;
  if (hours <= 5) 
    hourLED = (hours * 5) + 30;
  else
    hourLED = (hours * 5) - 30;

  if (USE_LED_MOVE_BETWEEN_HOURS == true) {
    if        (minutes >= 12 && minutes < 24) {
      hourLED += 1;
    } else if (minutes >= 24 && minutes < 36) {
      hourLED += 2;
    } else if (minutes >= 36 && minutes < 48) {
      hourLED += 3;
    } else if (minutes >= 48) {
      hourLED += 4;
    }
  }

  return hourLED;  
}

byte getLEDMinuteOrSecond(byte minuteOrSecond) {
  if (minuteOrSecond < 30) 
    return minuteOrSecond + 30;
  else 
    return minuteOrSecond - 30;
}

void startWiFi() { 
  wifiMulti.addAP(ssid, pass);   

  Serial.println("Connecting");
  byte i = 0;
  while (wifiMulti.run() != WL_CONNECTED) {  
    delay(250);
    Serial.print('.');
    LEDs[i++] = CRGB::Green;
    FastLED.show();    
  }
  Serial.println("\r\n");
  Serial.print("Connected to ");
  Serial.println(WiFi.SSID());             
  Serial.print("IP address:\t");
  Serial.print(WiFi.localIP());            
  Serial.println("\r\n");
}

void startUDP() {
  Serial.println("Starting UDP");
  UDP.begin(123);                          // 123 Portan UDP mesajlarını dinler
  Serial.print("Local port:\t");
  Serial.println(UDP.localPort());
  Serial.println();
}

uint32_t getTime() {
  if (UDP.parsePacket() == 0) { // henüz cevap yoksa
    return 0;
  }
  UDP.read(NTPBuffer, NTP_PACKET_SIZE); // read the packet into the buffer
  // Combine the 4 timestamp bytes into one 32-bit number
  uint32_t NTPTime = (NTPBuffer[40] << 24) | (NTPBuffer[41] << 16) | (NTPBuffer[42] << 8) | NTPBuffer[43];
  // Convert NTP time to a UNIX timestamp:
  // Unix time starts on Jan 1 1970. That's 2208988800 seconds in NTP time:
  const uint32_t seventyYears = 2208988800UL;
  // subtract seventy years:
  uint32_t UNIXTime = NTPTime - seventyYears;
  return UNIXTime;
}

void sendNTPpacket(IPAddress& address) {
  memset(NTPBuffer, 0, NTP_PACKET_SIZE);  // set all bytes in the buffer to 0
  // Initialize values needed to form NTP request
  NTPBuffer[0] = 0b11100011;   // LI, Version, Mode
  // send a packet requesting a timestamp:
  UDP.beginPacket(address, 123); // NTP requests are to port 123
  UDP.write(NTPBuffer, NTP_PACKET_SIZE);
  UDP.endPacket();
}

void convertTime(uint32_t time) {
  // Correct time zone
  time += (3600 * timeZone);
  
  currentDateTime.second = time % 60;
  currentDateTime.minute = time / 60 % 60;
  currentDateTime.hour   = time / 3600 % 24;
  time  /= 60;  // To minutes
  time  /= 60;  // To hours
  time  /= 24;  // To days
  currentDateTime.dayofweek = ((time + 4) % 7) + 1;
  int year = 0;
  int days = 0;
  while ((unsigned)(days += (LEAP_YEAR(year) ? 366 : 365)) <= time) {
    year++;
  }
  days -= LEAP_YEAR(year) ? 366 : 365;
  time  -= days; // To days in this year, starting at 0  
  days = 0;
  byte month = 0;
  byte monthLength = 0;
  for (month = 0; month < 12; month++) {
    if (month == 1) { // February
      if (LEAP_YEAR(year)) {
        monthLength = 29;
      } else {
        monthLength = 28;
      }
    } else {
      monthLength = monthDays[month];
    }
  
    if (time >= monthLength) {
      time -= monthLength;
    } else {
      break;
    }
  }
 
  currentDateTime.day = time + 1;
  currentDateTime.year = year + 1970;
  currentDateTime.month = month + 1;  

  // Correct European Summer time
  if (summerTime()) {
    currentDateTime.hour += 1;
  }

#ifdef DEBUG_ON
  Serial.print(currentDateTime.year);
  Serial.print(" ");
  Serial.print(currentDateTime.month);
  Serial.print(" ");
  Serial.print(currentDateTime.day);
  Serial.print(" ");
  Serial.print(currentDateTime.hour);
  Serial.print(" ");
  Serial.print(currentDateTime.minute);
  Serial.print(" ");
  Serial.print(currentDateTime.second);
  Serial.print(" day of week: ");
  Serial.print(currentDateTime.dayofweek);
  Serial.print(" summer time: ");
  Serial.print(summerTime());
  Serial.print(" night time: ");
  Serial.print(night());  
  Serial.println();
#endif  
}

boolean summerTime() {

  if (currentDateTime.month < 3 || currentDateTime.month > 10) return false;  // No summer time in Jan, Feb, Nov, Dec
  if (currentDateTime.month > 3 && currentDateTime.month < 10) return true;   // Summer time in Apr, May, Jun, Jul, Aug, Sep
  if (currentDateTime.month == 3 && (currentDateTime.hour + 24 * currentDateTime.day) >= (3 +  24 * (31 - (5 * currentDateTime.year / 4 + 4) % 7)) || currentDateTime.month == 10 && (currentDateTime.hour + 24 * currentDateTime.day) < (3 +  24 * (31 - (5 * currentDateTime.year / 4 + 1) % 7)))
  return true;
    else
  return false;
}

boolean night() {
  
  if (currentDateTime.hour >= NIGHTCUTOFF && currentDateTime.hour <= MORNINGCUTOFF) 
    return true;    
}