Skip to content

Instantly share code, notes, and snippets.

@eenchev

eenchev/kingroon_kp3s_gcode.txt

Created January 17, 2022 18:10
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save eenchev/f4357e1cc8a6d9b3383d1b44b9e8f8e1 to your computer and use it in GitHub Desktop.
Save eenchev/f4357e1cc8a6d9b3383d1b44b9e8f8e1 to your computer and use it in GitHub Desktop.
Download ZIP
Kingroon KP3S GCode for Cura
Raw
kingroon_kp3s_gcode.txt
Start G-code:
; KP3S Custom Start G-code
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X20 Y2.1 Z0.3 F5000.0 ; Move to start position
G1 X150 Y2.1 Z0.3 F1500.0 E15 ; Draw the first line
G1 X150 Y2.4 Z0.3 F5000.0 ; Move to side a little
G1 X20 Y2.4 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X20 Y5 Z0.3 F5000.0 ; Move over to prevent blob squish
End G-code:
; KP3S Custom End G-code
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X5 Y170 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z ;If T8x2 add Z
2 Comments
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment